ObjectiveBased on analytic hierarchy process（AHP）-criteria importance through intercriteria correlation（CRITIC） hybrid weighting method， grey relational analysis and backpropagation artificial neural network（BP-ANN）， to optimize the water extraction process of Qizhi prescription， so as to provide an experimental basis for optimization of the preparation process of this prescription and the establishment of quality standards. MethodsL₉（3⁴） orthogonal test was employed， and the AHP-CRITIC hybrid weighting method was utilized to determine the weight coefficients of the quality fractions of various components， including astragaloside Ⅳ， polygalaxanthone Ⅲ， calycosin-7-O-β-D-glucoside， tenuifolin， and 3，6′-disinapoylsucrose， as well as the dry extract yield. The comprehensive score of each factor level combination in the orthogonal test were calculated as evaluation indicator to select the optimal extraction process parameters. The effects of extraction times， extraction time， and solvent dosage on the aqueous extraction process of the formula were investigated through intuitive analysis， variance analysis， and grey relational analysis. Meanwhile， a BP-ANN model was established to reverse-predict the optimal extraction process parameters of Qizhi prescription， and the optimized process parameters were validated. ResultsThe weight coefficients of the five index components（astragaloside Ⅳ， tenuifolin， calycosin-7-O-β-D-glucoside， polygalaxanthone Ⅲ， and 3，6′-disinapoylsucrose） and dry extract yield were 25.7%， 20.82%， 16.41%， 12.45%， 15.96% and 8.67%， respectively. The optimized extraction process parameters were extracted 3 times with 8， 6， 6 times the amount of water， each time for 1 h. The network prediction results of BP-ANN test samples were consistent with the orthogonal test results， and the mean square error（MSE） of the predicted and measured values of the network was <1%. The water extraction process of Qizhi prescription analyzed and predicted by relevant mathematical models was stable and feasible， which could effectively improve the extraction efficiency of the active ingredients of Astragali Radix and Polygalae Radix， and the average comprehensive score of the validation test was 90.85 with the relative standard deviation（RSD） of 1.55%. ConclusionThis study establishes a water extraction process for compound Qizhi granules， and the optimized extraction process can effectively improve the extraction efficiency of active ingredients， which provides useful references for the optimization of preparation process and the establishment of quality standards for other clinical experience formulas.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Background Chronic excessive exposure to fluoride can cause damage to the central nervous system and a certain degree of learning and memory impairment. However, the associated mechanism is not yet clear and further exploration is needed. Objective Using 4D unlabelled quantitative proteomics techniques to explore differentially expressed proteins and their potential mechanisms of action in chronic excessive fluoride exposure induced brain injury. Methods Twenty-four SPF-grade adult SD rats, half male and half male, were selected and divided into a control group and a fluoride group by random number table method, with 12 rats in each group. Among them, the control group drank tap water (fluorine content<1 mg·L⁻¹), the fluoride group drank sodium fluoride solution (fluorine content 10 mg·L⁻¹), and both groups were fed with ordinary mouse feed (fluoride content<0.6 mg·kg⁻¹). After 180 d of feeding, the SD rats were weighed, and then part of the brain tissue was sampled for pathological examination by hematoxylin-eosin (HE) staining and Nissl staining. The rest of the brain tissue was frozen and stored at −80 ℃. Three brain tissue samples from each group were randomly selected for proteomics detection. Differentially expressed proteins were screened and subcellular localization analysis was performed, followed by Gene Ontology (GO) function analysis, Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis, cluster analysis, and protein-protein interaction analysis. Finally, Western blotting was used to detect the expression levels of key proteins extracted from the brain tissue samples. Results After 180 d of feeding, the average weight of the rats in the fluoride group was significantly lower than that in the control group (P<0.05). The brain tissue stained with HE showed no significant morphological changes in the cerebral cortex of the fluoride treated rats, and neuron loss, irregular arrangement of neurons, eosinophilic changes, and cell body pyknosis were observed in the hippocampus. The Nissl staining results showed that the staining of neurons in the cerebral cortex and hippocampus of rats exposed to fluoride decreased (Nissl bodies decreased). The proteomics results showed that a total of 6927 proteins were identified. After screening, 206 differentially expressed proteins were obtained between the control group and the fluoride group, including 96 up-regulated proteins and 110 down-regulated proteins. The differential proteins were mainly located in cytoplasm (30.6%), nucleus (27.2%), mitochondria (13.6%), plasma membrane (13.6%), and extracellular domain (11.7%). The GO analysis results showed that differentially expressed proteins mainly participated in biological processes such as iron ion transport, regulation of dopamine neuron differentiation, and negative regulation of respiratory burst in inflammatory response, exercised molecular functions such as ferrous binding, iron oxidase activity, and cytokine activity, and were located in the smooth endoplasmic reticulum membrane, fixed components of the membrane, chloride channel complexes, and other cellular components. The KEGG significantly enriched pathways included biosynthesis of secondary metabolites, carbon metabolism, and microbial metabolism in diverse environments. The results of differential protein-protein interaction analysis showed that the highest connectivity was found in glucose-6-phosphate isomerase (Gpi). The expression level of Gpi in the brain tissue of the rats in the fluoride group was lower than that in the control group by Western blotting (P<0.05). Conclusion Multiple differentially expressed proteins are present in the brain tissue of rats with chronic fluorosis, and their functions are related to biosynthesis of secondary metabolites, carbon metabolism, and microbial metabolism in diverse environments; Gpi may be involved in cerebral neurological damage caused by chronic overdose fluoride exposure.

Hepatic encephalopathy （HE） is a common severe liver disease syndrome in clinical practice and is one of the critical and severe diseases in internal medicine， and more than half of liver failure patients diagnosed with overt HE have a survival time of less than 1 year. A comprehensive analysis of the complex pathogenesis of HE and the development of diagnosis and treatment regimens based on evidence-based medicine are of great importance for alleviating high medical resource consumption， high medical expenses， and high incidence and mortality rates in clinical practice. The latest studies have shown that the intestinal tract and the central nervous system can perform bidirectional continuous interaction and signal transmission and regulate the function of inflammation signals， molecules， cells， and organs， which is known as neuroimmune communication and is highly consistent with the main pathological features of HE. With a focus on the mechanism of neuroimmune communication in HE， this article reviews the association between inflammation signal transduction via the gut-brain axis and neurotransmitter regulation and its role in neuroimmune communication in HE， which provides new ideas for the clinical diagnosis and treatment of HE and the research and development of related drugs.

Tumor immune microenvironment is a local external tumor environment composed of tumor immune cells and the cytokines secreted by these cells， and it plays a regulatory role in the development and progression of tumors. In the treatment of hepatocellular carcinoma， amino acid metabolism and its reprogramming of proliferating cell metabolism have attracted more and more attention， showing potential in regulating the tumor immune microenvironment. Although amino acid metabolic reprogramming is regarded as a novel approach for tumor therapy， its specific mechanism remains unclear in the regulation of tumor immunity in hepatocellular carcinoma. This article discusses the mechanism of action of amino acid metabolism in the tumor immune microenvironment of hepatocellular carcinoma and its application prospect in clinical practice， in order to provide new ideas for immunotherapy for liver cancer.

Objective : To investigate the mediating effect of negative emotions on visual impairment and resilience among middle-aged and elderly populations, so as to provide insights into improving psychological health among middle-aged and elderly populations. Methods: Demographic information, visual impairment, negative emotions and resilience in the residents at ages of 45 years and older were collected through the database of the Yushu Physical and Mental Health Survey carried out by Institute of Psychology of Chinese Academy of Sciences. Structural equation model was used to analyze the effects of visual impairment and resilience and the mediating role of negative emotions. Results: Totally 2 997 middle-aged and elderly populations were enrolled, with the median age of 50.00 (interquartile range, 47.00) years. There were 1 320 males (44.04%) and 1 677 females (55.96%), 1 627 illiterate persons (54.29%), and 2 780 married persons (92.76%). The scores of visual impairment, negative emotions and resilience were (6.79±2.59), (6.35±3.05) and (33.38±10.41) points, respectively. The results of structural equation model analysis showed that after adjusting for age, gender, educational level and marital status, visual impairment had a direct negative positive effect on resilience, with a direct effect value of -0.157 (95%CI: -0.177 to -0.137), and visual impairment could also negatively affect residence through negative emotions, with a mediating effect value of -0.112 (95%CI: -0.126 to -0.104), and the mediating effect contributed 41.64% to the total effect. Conclusion visual impairment could reduce residence directly or indirectly through the mediating effect of negative emotions among middle-aged and elderly populations.

ObjectiveTo investigate the brain absorption components of Tianyuan Zhitong prescription and their distribution based on ultra-high performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS）， desorption electrospray ionization mass spectrometry imaging（DESI-MSI） and hyperspectral imaging techniques. MethodTen BALB/c mice were randomly divided into blank group（n=3） and administration group（n=7）， the administration group was gavaged with 0.3 mL of Tianyuan Zhitong prescription liquid at a concentration of about 5 g·mL^-1 of the raw material， and the blank group was gavaged with an equal volume of normal saline， and the whole brain of the mice were taken for the preparation of tissue homogenates and frozen sections， respectively. The tissue homogenates were qualitatively analyzed by UPLC-Q-TOF-MS for the brain absorption components in positive and negative ion modes， frozen sections were used for imaging to observe the distribution of these components in the brain. Cytoviva dark-field enhancement microscope was used to perform hyperspectral imaging scanning on the brain sections of mice from each group， and the scattered light data of at least 1 000 pixels in the visible-near-infrared（400-1 000 nm） band in the microscopic field of view were collected and average spectrum were created， which were used to compare the components in the brain tissues of mice from the blank and administration groups. ResultA total of 27 brain absorption components of Tianyuan Zhitong prescription were identified by UPLC-Q-TOF-MS， including 10 organic acids， 5 glycosides， 4 alkaloids， 1 phenol， 4 flavonoids， 2 phthalides and 1 other compound， which were mainly derived from Gastrodiae Rhizoma， Chuanxiong Rhizoma， vinegar-processed Corydalis Rhizoma， Ziziphi Spinosae Semen and processed Morindae Officinalis Radix. A total of 14 components were identified by mass spectrometry imaging， of which ferulic acid， tetrahydropalmatine and N-methyl dehydroberberine were mainly distributed in the cerebral cortex， vitamin B₅， vemonoic acid and ricinoleic acid were mainly distributed in the hypothalamus， elemicin， octadecenic acid and octadecanoic acid were mainly distributed in the cortex and hypothalamus， while senkyunolide B， ligustilide， linoleic acid， 9，12-octadecadienoyl ethyl ester and spinosin were distributed in most regions of the brain tissues. Hyperspectral imaging showed that in the visible-near-infrared band range， the average spectrum of the brain tissues of mice in the administration group was significantly red-shifted， indicating that there were differences in the physical properties or contents of the chemical components in the brain between mice in the blank group and those in the administration group， and further verified the results of mass spectrometry imaging. ConclusionThrough the combination of UPLC-Q-TOF-MS and imaging techniques， the pharmacodynamic components of Tianyuan Zhitong prescription in the treatment of headache and the regional characteristics in brain tissue are clarified， which can provide reference for the selection of the index components of the research on the quality standard of this prescription and the research on the mechanism of the pharmacological effect.