Objectives: This study aims to evaluate the efficacy and safety of two types of sandblasted with large-grit and acid-etched (SLA) surface implants with different surface roughness. Patients and Methods: This study was conducted based on a clinical record review of 55 patients (mean age, 53.00 years). A total of 80 SLA surface implants was placed. Among the 80 implants, 38 implants placed in 29 subjects had surface roughness (Ra) of 3.09 µm (test group, TG), while the other 42 implants placed in 31 subjects had a surface roughness (Ra) of 2.50 µm (control group, CG). A comparison was made of implant primary/ secondary stability; success and survival rates; marginal bone loss; and soft tissue assessment including probing pocket depth (PPD), plaque index (PI), gingival index (GI), and bleeding on probing (BOP) between the groups at 1 year after implant placement. Results: Among the implants that were initially registered, 1 from the TG and 4 from the CG dropped out, leaving 37 implants in the TG and 38 implants in the CG to be traced and analyzed. Although 1 TG case showed unstable primary stability, all cases showed stable secondary stability. Success and survival rates at 1 year after implant placement were 100% in both groups. Marginal bone loss was 0.07 mm and 0.00 mm for the TG and CG, respectively, but the difference was not significant. Among the several parameters for evaluation of soft tissue, the TG showed lower PI at 1 year after implant placement (TG=0.00, CG=0.29; P=0.0004), while the remaining categories showed no significant difference between the groups. Conclusion This study shows that the two types of SLA implants with different surface roughness have no difference in efficacy or safety. Therefore, both of the implants can be used safely and with promising outcomes.

Purpose: Intraoral scanners, desktop scanners, and cone-beam computed tomography (CBCT) are being used in a complementary way for diagnosis and treatment planning. Limited patient-based results are available about dimensional reproducibility among different three-dimensional imaging systems. This study aimed to evaluate dimensional reproducibility among patient-derived digital models created from an intraoral scanner, desktop scanner, and two CBCT systems. Materials and Methods: Twenty-nine arches from sixteen patients who were candidates for implant treatments were enrolled. Different types of CBCT systems (KCT and VCT) were used before and after the surgery. Polyvinylsiloxane impressions were taken on the enrolled arches after the healing period. Gypsum casts were fabricated and scanned with an intraoral scanner (CIOS) and desktop scanner (MDS). Four test groups of digital models, each from CIOS, MDS, KCT, and VCT, respectively, were compared to the reference gypsum cast group. For comparison of linear measurements, intercanine and intermolar widths and left and right canine to molar lengths were measured on individual gypsum cast and digital models. All measurements were triplicated, and the averages were used for statistics.Bland–Altman plots were drawn to assess the degree of agreement between each test group with the reference gypsum cast group. A linear mixed model was used to analyze the fixed effect of the test groups compared to the reference group (α=0.05).Result: The Bland–Altman plots showed that the bias of each test group was –0.07 mm for CIOS, –0.07 mm for MDS, –0.21 mm for VCT, and –0.25 mm for KCT. The linear mixed model did not show significant differences between the test and reference groups (P>0.05). Conclusion The linear distances measured on the digital models created from CIOS, MDS, and two CBCT systems showed slightly larger than the references but clinically acceptable reproducibility for diagnosis and treatment planning.reproducibility for diagnosis and treatment planning.plots showed that the bias of each test group was –0.07 mm for CIOS, –0.07 mm for MDS,

Patients with collapsed occlusal support and unilateral chewing show parafunctional mandibular movements, which can be complicated in older patients. Gothic arch tracing and split cast technique are used to confirm the deviation between centric relation and anterior habitual bite in patient who has oral dyskinesia and collapsed occlusion. Temporary denture as occlusal stabilization appliance was provided for stable occlusion and reproducible mandibular movement. Definitive denture was fabricated by lingualized occlusion concept.
Centric Relation ; Dentures ; Humans ; Mandible ; Mastication ; Mouth Rehabilitation ; Mouth ; Movement Disorders ; Prostheses and Implants

PURPOSE: This study was conducted to investigate patterns of adjacent tooth displacement in the posterior implant with interproximal contact loss (ICL) by 3-D digital superimposition method. MATERIALS AND METHODS: Posterior partially edentulous patients, restored with implant fixed partial prostheses before 2011 and suffered from food impaction of ICL between 2009 and 2011, were included. Two dental casts, at the time of delivery and at the time of food impaction in a same patient, was converted into 3-D digital models through scanning and superimposition was performed to assess chronologic changes of the dentition. Directions of tooth displacement were evaluated and the amount of ICL was calculated. Correlations between the amount of ICL and elapsed time, or between the amount of ICL and age after function, were assessed at a significance level of P<.05. RESULTS: A total number of 13 patients (8 males, 5 females) with a mean age of 65.76 ± 9.94 years and 17 areas (4 maxillae, 13 mandibles) were included in this retrospective study. Teeth adjacent to the implant restoration showed complex displacements but characteristic tendency according to the location of the arch. The mean amount of ICL was 0.33 ± 0.14 mm. Elapsed time from function to ICL was 61.47 ± 31.27 months. There were no significant differences between the amount of ICL and elapsed time, or age (P>.05). CONCLUSION: Natural teeth showed various directional movements to result in occlusal change in the arch. The 3-D superimposition of chronologic digital models was a helpful method to analyze the changes of dentition and individual tooth displacement adjacent to implant restoration.
Dental Implants ; Dentition ; Humans ; Male ; Maxilla ; Methods ; Prostheses and Implants ; Retrospective Studies ; Tooth

Amelogenesis imperfecta characterized as abnormally formed enamel is caused by a defect of unique group of genes. Patients affected by this disease might have difficulties in social and psychological aspects due to non-esthetic teeth as well as functional problems caused by enamel detachment and tooth wear from their early ages. Adult patients with amelogenesis imperfecta can be treated with full-mouth restorations, which make functional and esthetic rehabilitations of severely worn tooth. However, the anterior open bite and lack of occlusal clearance for posterior teeth restorations due to compensatory extrusion are the intervening factors in the prosthetic treatment. Therefore, the determination of anterior tooth lengths, vertical dimension, and anterior guidance should be set carefully. Recently, computer-aided design and computer-aided manufacturing (CAD/CAM) techniques help systematic approaches and enable dentists to reduce time-consuming procedures in the diagnosis and treatment of full-mouth rehabilitation. This case report demonstrates the successful full mouth rehabilitation using a CAD/CAM system in a young adult patient with amelogenesis imperfecta and anterior open bite.
Adult ; Amelogenesis Imperfecta* ; Amelogenesis* ; Computer-Aided Design ; Dental Enamel ; Dentists ; Diagnosis ; Humans ; Mouth Rehabilitation ; Open Bite* ; Rehabilitation* ; Tooth ; Tooth Wear ; Vertical Dimension ; Young Adult

OBJECTIVES: The purpose of this study was to evaluate the anti-cancer activity of cisplatin by studying its effects on cell viability and identifying the mechanisms underlying the induction of cell cycle arrest and apoptosis on oral squamous cell carcinoma (OSCC) cell lines with varying p53 mutation status. MATERIALS AND METHODS: Three OSCC cell lines, YD-8 (p53 point mutation), YD-9 (p53 wild type), and YD-38 (p53 deletion) were used. To determine the cytotoxic effect of cisplatin, MTS assay was performed. The cell cycle alteration and apoptosis were analyzed using flow cytometry. Western blot analysis was used to detect the expression of cell cycle alteration- or apoptosis-related proteins as well as p53. RESULTS: Cisplatin showed a time- and dose-dependent anti-proliferative effect in all cell lines. Cisplatin induced G2/M cell accumulation in the three cell lines after treatment with 0.5 and 1.0 µg/mL of cisplatin for 48 hours. The proportion of annexin V-FITC-stained cells increased following treatment with cisplatin. The apoptotic proportion was lower in the YD-38 cell line than in the YD-9 or YD-8 cell lines. Also, immunoblotting analysis indicated that p53 and p21 were detected only in YD-8 and YD-9 cell lines after cisplatin treatment. CONCLUSION: In this study, cisplatin showed anti-cancer effects via G2/M phase arrest and apoptosis, with some difference among OSCC cell lines. The mutation status of p53 might have influenced the difference observed among cell lines. Further studies on p53 mutation status are needed to understand the biological behavior and characteristics of OSCCs and to establish appropriate treatment.
Apoptosis ; Blotting, Western ; Carcinoma, Squamous Cell* ; Cell Cycle ; Cell Cycle Checkpoints ; Cell Line ; Cell Survival ; Cisplatin* ; Epithelial Cells* ; Flow Cytometry ; Immunoblotting

OBJECTIVE: The aim of the study was to evaluate the effectiveness of ultrasouond-guided salivary gland injection of botulinum toxin A (BTX-A) for posterior drooling. METHOD: 11 patients with brain lesion (9 cerebral palsy, 1 hypoxic ischemic encephalopathy and 1 mental retardation) with posterior drooling (an initial PDAS score greater than 2) and related pulmonary problems were recruited. Drooling severity was measured at baseline, 4 weeks, 3 months and 6 months after botulinum toxin A injection, by using Teacher Drooling Scale (TDS), Visual Analogue Scales (VAS), Drooling Score System (DSS)-severity, frequency and Posterior Drooling/Aspiration System (PDAS). RESULTS: The TDS, DSS-severity, DSS-frequency, VAS, PDAS were significantly reduced at 4 weeks and 3 months after BTX-A injection into salivary glands compared to pre-injection (p<0.05). However, there were no significant changes at 6 months compared to pre-injection level. CONCLUSION: BTX-A injection into salivary glands may improve anterior drooling in patients with brain lesions. Furthermore BTX-A injection into salivary glands may also decrease the posterior drooling which might related to respiratory symptoms in aspiration pneumonia.
Botulinum Toxins ; Botulinum Toxins, Type A ; Brain ; Cerebral Palsy ; Humans ; Hypoxia-Ischemia, Brain ; Pneumonia, Aspiration ; Salivary Glands ; Sialorrhea ; Sorbitol ; Stress, Psychological ; Tyramine ; Weights and Measures

BACKGROUND/AIMS: In Korea, few studies have examined primary cardiac tumors, which have a reported incidence of 0.0017~0.19% in autopsy series. This study surveyed the status of primary cardiac tumors over the past 7 years in one region. METHODS: A retrospective review examined all patients with primary cardiac tumors, except for confirmed thrombus, using hospital medical records from 2000 to 2006 at six community hospitals. Identified cases undergoing biopsy and surgery were selected for the study. RESULTS: The operative mortality was 7.7%. Of the 71 patients (26 males) with identified primary cardiac tumors, 65 (91.5%) tumors were benign and 6 (8.5%) were malignant. The benign tumors were myxoma (78.9%), rhabdomyoma (4.2%), fibroelastoma (2.8%), fibroma (1.4%), and leiomyoma (1.4%). Two of the myxomas were present at multiple locations. The malignant tumors included sarcomas (67%) and lymphomas (33%). Most of the tumors were located in the left atrium (76%). The majority of patients presented with chest pain and dyspnea. During follow-up for an average of 26.8+/-21.3 months, all but one patient with benign tumors was alive; one myxoma patient died perioperatively (1.5%). Four of the patients with malignant tumors (67%) died. CONCLUSIONS: Cardiac myxomas and sarcomas were the most common primary benign and malignant tumors, respectively. Benign tumors had excellent postoperative survival rates, while malignant tumors had high mortality.
Autopsy ; Biopsy ; Chest Pain ; Dyspnea ; Fibroma ; Follow-Up Studies ; Heart Atria ; Heart Neoplasms ; Hospitals, Community ; Humans ; Incidence ; Korea ; Leiomyoma ; Lymphoma ; Medical Records ; Myxoma ; Retrospective Studies ; Rhabdomyoma ; Sarcoma ; Survival Rate ; Thrombosis

Acute phlegmonous infection of the gastrointestinal tract is characterized by purulent inflammation of the submucosa and muscular layer with sparing of the mucosa. The authors report a rare case of acute diffuse phlegmonous esophagogastritis, which was well diagnosed based on the typical chest computed tomographic (CT) findings and was successfully treated. A 48-yr-old man presented with left chest pain and dyspnea for three days. Chest radiograph on admission showed mediastinal widening and bilateral pleural effusion. The patient became febrile and the amount of left pleural effusion is increased on follow-up chest radiograph. Left closed thoracostomy was performed with pus drainage. A CT diagnosis of acute phlegmonous esophagogastritis was suggested and a surgery was decided due to worsening of clinical condition of the patient and radiologic findings. Esophageal myotomies were performed and the submucosal layer was filled with thick, cheesy materials. The patient was successfully discharged with no postoperative complication.
Acute Disease ; Cellulitis/complications/*diagnosis/radiography ; Drainage ; Esophagitis/complications/*diagnosis/surgery ; Gastritis/complications/*diagnosis/surgery ; Humans ; Klebsiella Infections/diagnosis ; Klebsiella pneumoniae/isolation & purification ; Male ; Middle Aged ; Pleural Effusion/etiology/radiography ; Thoracostomy ; Tomography, X-Ray Computed

PURPOSE: Lipobean(R)s, widely used in lipodissolving techniques, contain phosphatidylcholine and sodium deoxycholate as its main substances. They have been approved only as medication for liver disease by the FDA. However, they have been used under various clinical settings without exact knowledge of its action mechanism. The authors designed an in vitro study to analyze the effects of different concentrations of phosphatidylcholine and sodium deoxycholate on adipocytes and other types of cells. METHODS: Human adipose-derived stem cell were cultured and induced to differentiate into adipocytes. Fibroblasts extracted from human inferior turbinate tissue, and MC3T3-E1 osteoblast lines were cultured. Phosphatidylcholine solution dissolved with ethanol was applied to the culture medium at differing concentrations (1, 4, 7, 10 mg/mL). The sodium deoxycholate solution dissolved in DMSO applied to the medium at differing concentrations (0.07, 0.1. 0.4. 0.7 mg/mL). Cells were dispersed at a concentration of 5 x 10(3) cells/well in 24 well plates, and surviving cells were calculated 1 day after the application using a CCK-8 kit. RESULTS: The number of surviving cells of adipocytes, fibroblasts and osteoblasts decreased as the concentration of sodium deoxycholate increased. However, all types of cells that had been processed in a phosphatidylcholine showed a cell survival rate of over 70% at all concentrations. CONCLUSION: This study shows that sodium deoxycholate is the more major factor in destroying adipocytes, and it is also toxic to the other cells. Therefore, we conclude that care must be taken when using Lipobean(R)s as a method of reducing adipose tissue, for its toxicity may destroy other nontarget cells existing in the subcutaneous tissue layer.
Adipocytes ; Adipose Tissue ; Cell Survival ; Deoxycholic Acid ; Dimethyl Sulfoxide ; Ethanol ; Fibroblasts ; Humans ; Liver Diseases ; Osteoblasts ; Phosphatidylcholines ; Sincalide ; Sodium ; Stem Cells ; Subcutaneous Tissue ; Turbinates