BACKGROUND: Dental caries is a chronic childhood disease and one of the most prevalent public health problems worldwide. Lead is a heavy metal that is taken up by the teeth and bones. However, the association between lead exposure during pregnancy, when the tooth germs are formed, and the prevalence of dental caries in the primary dentition remains unclear. This study aimed to examine the association between maternal blood lead levels and the prevalence of dental caries in the primary dentition of children. METHODS: This cross-sectional study was conducted as an Adjunct Study to the Japan Environment and Children's Study (JECS), which is an ongoing nationwide birth-cohort study. Among children participating in the JECS at the University of Occupational and Environmental Health Sub-Regional Center, those aged 7-8 years underwent oral examination and questionnaire administration. The dft (i.e., sum of the number of decayed and filled primary teeth) was then determined. The dft numerically expresses the dental caries prevalence in the primary dentition (larger value indicates more prevalent dental caries). Poisson regression analyses with robust standard errors were performed to evaluate the association between maternal blood lead levels during pregnancy, measured using frozen samples, and the dft. RESULTS: The study included 139 children, of whom 54.7% were girls, and 89.2% were 7 years old. The median maternal blood lead level was 6.1 ng/g (25-75 percentile, 5.0-7.3). The median dft was 0 (25-75 percentile, 0-4). After adjusting for covariates including age, sex, and oral health status and behavior, maternal blood lead levels were significantly associated with increased dft (prevalence ratio, 1.6; 95% confidence interval, 1.3-1.8; per one standard deviation increase in natural log-transformed maternal blood lead levels). CONCLUSIONS This study found an association between maternal blood lead levels and the prevalence of dental caries in the primary dentition of children aged 7-8 years. Maternal exposure to lead during mid- to late-term pregnancy may affect the caries susceptibility of children after birth.
Humans ; Lead/blood* ; Female ; Dental Caries/epidemiology* ; Prevalence ; Tooth, Deciduous ; Male ; Japan/epidemiology* ; Child ; Cross-Sectional Studies ; Pregnancy ; Adult ; Maternal Exposure/adverse effects* ; Environmental Pollutants/blood* ; Prenatal Exposure Delayed Effects/epidemiology*

OBJECTIVE: To establish a three-dimensional finite element model of a digital wire loop space maintainer for the mandible and primary tooth loss, in order to investigate the stress, deformation, and shear force experienced by patients with the loss of the second primary molar when wearing the wire loop space maintainer. METHODS: Cone beam computed tomography (CBCT) scans were performed on the patients to create a digital model of the mandible with the absence of the second primary molar using Mimics 21.0 software. A digital model integrating the crown's retention and the wire loop structure of the full crown and ring wire loop space maintainer was constructed using pediatric space maintainer design software, utilizing three different materials: cobalt-chromium alloy, polyether ether ketone (PEEK), and titanium alloy. In ANSYS Work Beach 2023 R2 software, vertical loads of 70 N, tilted 45° along the long axis of the tooth loads of 70 N, and a 10 N load on the surface of the wire loop were applied to the occlusal surfaces of models 46 and 84, simulating centric and lateral occlusions during chewing with the wire loop space maintainer in place. The stress states of the wire loop space maintainer and supporting teeth were analyzed. RESULTS: Under various loading conditions, the maximum principal stress of the ring wire loop space maintainer was significantly lower than that of the full crown. Stress contour maps indicated that the peak of the maximum principal stress occurred at the junction of the wire loop and crown structure, indicating that this area was more susceptible to fracture. The ring wire loop space maintainer made from PEEK material exhibited the lowest maximum shear stress on the internal organizational surfaces, with equivalent stresses of 23.18 MPa and 36.35 MPa for models 46 and 84, respectively. Stress contour maps demonstrated that the maximum stress on tooth 46 was located at its mesial, while the maximum stress on tooth 84 was situated near the root area on its distal, in contact with the wire loop space maintainer. CONCLUSION In cases of second primary molar loss, wearing the digital ring wire loop space maintainer can effectively distribute stress, and the ring wire loop space maintainer made from PEEK material reduces the stress experienced by supporting teeth to some extent, demonstrating its superiority in clinical application.
Finite Element Analysis ; Humans ; Tooth, Deciduous ; Cone-Beam Computed Tomography ; Space Maintenance, Orthodontic/methods* ; Imaging, Three-Dimensional ; Orthodontic Wires ; Dental Stress Analysis ; Mandible ; Stress, Mechanical

Dental stem cells (DSCs), a distinct subset of mesenchymal stem cells (MSCs), are isolated from dental tissues, such as dental pulp, exfoliated deciduous teeth, periodontal ligament, and apical papilla. They have emerged as a promising source of stem cell therapy for tissue regeneration and autoimmune disorders. The main types of DSCs include dental pulp stem cells (DPSCs), stem cells from human exfoliated deciduous teeth (SHED), periodontal ligament stem cells (PDLSCs), and stem cells from apical papilla (SCAP). Each type exhibits distinct advantages: easy access via minimally invasive procedures, multi-lineage differentiation potential, and excellent ethical acceptability. DSCs have demonstrated outstanding clinical efficacy in oral and maxillofacial regeneration, and their long-term safety has been verified. In oral tissue regeneration, DSCs are highly effective in oral tissue regeneration for critical applications such as the restoration of dental pulp vitality and periodontal tissue repair. A defining advantage of DSCs lies in their ability to integrate with host tissues and promote physiological regeneration, which render them a better option for oral tissue regenerative therapies. Beyond oral applications, DSCs also exhibit promising potential in the treatment of systemic diseases, including type Ⅱ diabetes and autoimmune diseases due to their immunomodulatory effects. Moreover, extracellular vesicles (EVs) derived from DSCs act as critical mediators for DSCs' paracrine functions. Possessing regulatory properties similar to their parental cells, EVs are extensively utilized in research targeting tissue repair, immunomodulation, and regenerative therapy-offering a "cell-free" strategy to mitigate the limitations associated with cell-based therapies. Despite these advancements, standardizing large-scale manufacturing, maintaining strict quality control, and clarifying the molecular mechanisms underlying the interaction of DSCs and their EVs with recipient tissues remain major obstacles to the clinical translation of these treatments into broad clinical use. Addressing these barriers will be critical to enhancing their clinical applicability and therapeutic efficacy. In conclusion, DSCs and their EVs represent a transformative approach in regenerative medicine, and increasing clinical evidence supports their application in oral and systemic diseases. Continuous innovation remains essential to unlocking the widespread clinical potential of DSCs.
Humans ; Dental Pulp/cytology* ; Translational Research, Biomedical ; Mesenchymal Stem Cells/cytology* ; Periodontal Ligament/cytology* ; Stem Cells/cytology* ; Regeneration ; Tooth, Deciduous/cytology* ; Cell Differentiation ; Tissue Engineering/methods* ; Regenerative Medicine

OBJECTIVES: This study aimed to investigate the clinical characteristics of deciduous fused teeth and their inherited permanent-tooth performance type by using panoramic radiographs. METHODS: A total of 14 404 panoramic radiographs of 3- to 6-year-old children with deciduous dentition were collected from January 2023 to July 2024. The incidence of deciduous fused teeth was observed, and the abnormality of permanent teeth was recorded. SPSS 24.0 software was used for statistical analysis. RESULTS: The incidence of deciduous fused teeth was 3.06% (441/14 404). The order of dental position was as follows: mandibular deciduous incisors and cusp teeth fused (58.18%) > mandibular deciduous central and lateral incisors fused (30.91%) > maxillary deciduous central and lateral incisors fused (8.89%) > deciduous incisors and supernumerary teeth fused (2.02%). Deciduous fused teeth were found in 226 boys and 215 girls, with no significant difference between the sexes (P>0.05). We observed one pair (87.76%, 387/441) and two pairs (12.24%, 54/441) of fused teeth (54/441), respectively. A total of 287 pairs of fusion teeth on the right side more than 208 pairs on the left side, and the difference between them was statistically significant (P<0.01). More fusion teeth existed in mandibular deciduous teeth (443 pairs) than in maxillary ones (54 pairs), and the difference between them was statistically significant (P<0.01). More unilateral deciduous teeth (387 subjects) were found than bilateral ones (54 subjects), and the difference between them was statistically significant (P<0.01). Three types of deciduous fused teeth with inherited permanent teeth were observed as follows: 1) 49.49% (245/495) of inherited permanent teeth was absent, 2) 46.67% (231/495) of inherited permanent teeth was not absent, and 3) the number of fused permanent teeth accounted for 3.84% (19/495). CONCLUSIONS The incidence of deciduous fused teeth was 3.06%, mostly occurring in the lower anterior teeth region, with no gender difference. One pair of fused teeth is commonly observed, more often on the right than the left. These fusions occur more frequently in the mandible than the maxillary, and unilateral cases are more common than bilateral ones. Deciduous fused teeth had a certain impact on inherited permanent teeth. Pediatric dentists should pay attention to and closely observe whether any abnormality exists in the permanent dentition for early detection to prevent the harm caused by deciduous fused teeth.
Humans ; Tooth, Deciduous/abnormalities* ; Male ; Child ; Female ; Child, Preschool ; Dentition, Permanent ; Radiography, Panoramic ; Fused Teeth/diagnostic imaging* ; Incisor/diagnostic imaging* ; Tooth, Supernumerary/diagnostic imaging* ; Incidence ; Mandible

OBJECTIVES: This study aims to evaluate the differences in shear bond strength, marginal adaptation, and nano-microleakage after aging among snowplow, layered filling, and lining techniques applied to the resin-bonded restoration of defective primary teeth. METHODS: In this study, 51 freshly extracted, crown-intact primary anterior teeth and 30 primary molars were collected. The experimental groups were as follows: layered filling group, lining group, and snowplow group. Experiments were performed to compare the differences in shear bond strength, marginal integrity, and silver ion nano-microleakage after aging among these groups. RESULTS: The median shear bond strength of the layered filling group, lining group, and snowplow group were 2.45, 5.72, and 9.43 MPa, respectively. The values for lining group and snowplow group were significantly higher than that for layered filling group (P<0.05). No statistically significant difference was found between lining group and snowplow group (P>0.05). The median overall margin integrity of the layered filling group, lining group, and snowplow group were 55.38%, 48.25%, and 65.63%, respectively. The difference among the three groups was not statistically significant (P>0.05). The median percentages of silver ion nano-microleakage in the layered filling group, lining group, and snowplow group were 11.71%, 9.47%, and 11.55%, respectively. The difference among the three groups was not statistically significant (P>0.05). CONCLUSIONS Applying the snowplow technique to restore defective primary teeth can improve the bond strength and margin integrity and reduce nano-microleakage.
Tooth, Deciduous ; Humans ; Dental Restoration, Permanent/methods* ; Dental Leakage ; Shear Strength ; Dental Bonding/methods* ; Molar ; Composite Resins ; Silver

OBJECTIVES: This study aimed to investigate the incidence, imaging characteristics, and clinical manifestations of the eruption failure of deciduous molars using panoramic radiographs to provide a foundation for diagnosis and treatment in this population. METHODS: This study retrospectively reviewed panoramic radiographs of children aged 4-8 years obtained from Stomatology Hospital, Zhejiang University School of Medicine between January 2021 and December 2023. A total of 31 331 subjects were included for the radiographic assessment of the tooth eruption failure of deciduous molars. Incidence, radiographic characteristics, and associated complications were documented. Statistical analysis was performed using SPSS 26.0. RESULTS: The incidence of the eruption failure of deciduous molars among children aged 4-8 years was 0.94% (296/31 331). The rate was 1.55 times higher in females than in males, demonstrating a significant gender difference (P<0.001). Among the affected deciduous molars, mandibular first deciduous molars accounted for 76.4%, followed by the mandibular second deciduous molars (13.8%), and the maxillary deciduous molars collectively comprised 9.8%. The severity of eruption disorders was significantly associated with the mesial and distal tilting of adjacent teeth and elongation of the antagonist (P<0.001). CONCLUSIONS The incidence of the eruption failure of deciduous molars in children aged 4-8 years was 0.94%, with a high prevalence in females and a predilection for the mandible, particularly the mandibular first deciduous molar. For deciduous molars with severe eruption failure, early intervention is crucial to mitigate complications such as malocclusion and space loss.
Humans ; Child ; Child, Preschool ; Tooth, Deciduous/diagnostic imaging* ; Female ; Molar/physiopathology* ; Male ; Retrospective Studies ; Tooth Eruption ; Radiography, Panoramic ; Incidence

OBJECTIVES: This study aimed to investigate the clinical characteristics of congenital deciduous teeth absence and its permanent teeth performance type by using panoramic radiographs. METHODS: A total of 15 749 panora-mic radiographs of 3-6-year-old children with deciduous dentition were collected from January 2020 to December 2021. The incidence of congenital deciduous teeth absence was observed, and the abnormality of permanent teeth was recor-ded. SPSS 24.0 software was used for statistical analysis. RESULTS: The incidence of congenital deciduous teeth absence was 2.54% (400/15 749), which was found in 217 girls and 183 boys, and the difference between the genders was statistically significant (P=0.003). The absence of one and two deciduous teeth accounted for 99.75% (399/400) of the subjects. In addition, 92.63% (490/529) of mandibular deciduous lateral incisor was congenitally absent, 44.80% (237/529) of deciduous teeth was absent in the left jaw, and less than 55.20% (292/529) was absent in the right; the difference between them was statistically significant (P=0.017). The absence of 96.41% (510/529) deciduous teeth in the mandibular was significantly more than that of 3.59% (19/529) in the maxillary, and the difference between was statistically significant (P=0.000). Furthermore, 68.00% (272/400) and 32.00% (128/400) of deciduous teeth were absent in unilateral and bilateral, respectively, and the difference was statistically significant (P=0.000). Four types of congenital deciduous teeth absence with permanent teeth were observed as follows: 1) 73.91% (391/529) of permanent teeth was absent; 2) 20.60% (109/529) of permanent teeth was not absent; 3) the number of fused permanent teeth accounted for 4.91% (26/529); 4) the number of supernumerary teeth was 0.57% (3/529). CONCLUSIONS Although the absence of congenital deciduous teeth is less common than that of permanent teeth, it affects deciduous and permanent teeth to some extent. Dentists should pay attention to trace and observe whether abnormalities are present in the permanent teeth and take timely measures to maintain children's oral health.
Male ; Female ; Humans ; Tooth, Deciduous ; Dentition, Permanent ; Tooth, Supernumerary/epidemiology* ; Anodontia/etiology* ; Tooth Abnormalities/complications* ; Fused Teeth/epidemiology*

There is a high incidence of chronic periapical periodontitis of deciduous teeth, however, there is a low incidence of the apical cyst. This paper reports a 7-year-old child with deciduous periodontitis caused by chronic periapical periodontitis of deciduous teeth. Through literature review, the etiology, imaging characteristics, diagnosis, differential diagnosis, and treatment methods were discussed to provide the basis for clinical diagnosis and treatment.
Child ; Humans ; Cysts ; Diagnosis, Differential ; Periapical Periodontitis/therapy* ; Tooth, Deciduous

Fused teeth were a phenomena of teeth anomalies in shape, which can affect the dental teeth both in primary and permanent dentition. Fused teeth do not only cause problems on crowding of dentition, abnormal occlusion and aesthetic, but also increase risks of dental caries, endodontics diseases, periapical diseases and periodontal diseases. Fusion of deciduous teeth may lead to abnormality of subsequent permanent teeth. Treatment of fused teeth may require multidisciplinary approach in endodontics, periodontics, oral and maxillofacial surgery, prosthodontics and orthodontics. The aim of the present article is to review the etiology, classification, clinical manifestations and treatment of fused teeth in order to provide dental clinicians with a reference of clinical management for fused teeth.
Humans ; Fused Teeth/therapy* ; Anodontia ; Tooth, Deciduous ; Dental Caries/therapy* ; Esthetics, Dental

OBJECTIVE: To explore the construction process of the digital reference crown models, and to initially establish the digital reference crown models of the primary teeth to lay the foundation for the establishment of the standardized crown models and the future related applications of computer-aided design/computer-aided manufacture (CAD/CAM) technology to pediatric dentistry. METHODS: This study randomly selected children who were caries free, aged from 4 to 5 years in several kindergartens of Haidian District of Beijing.Plaster dental models were made for the children after taking complete impressions.The digital dental models were reconstructed by using the three-dimensional (3D) dental model scanner.And then, Geomagic Studio, a 3D reverse engineering software, was employed to extract the single dental crown data, the mesiodistal and buccolingual diameters and the height of the crowns were measured.The object was reduced or enlarged by a numerical factor, and then the size of each dental crown was standardized.A total of 3-5 points features on the crown were created, and all the objects were aligned through the functions of feature-based alignment.Finally, through average-based object creation and smoothing, the digital models of reference crowns of the primary teeth were established. RESULTS: A total of 40 plaster dental models from 16 boys and 26 girls were selected out for our further study.The digital dental models were reconstructed, and the mesiodistal and buccolingual diameters and the height of the crowns were measured by using reverse engineering technology.Comparing the results of using mesiodistal diameter, buccolingual diameter and height as the standards, we chose the mesiodistal diameters of crowns to do the standardization, and successfully established the digital reference models of 20 primary teeth crowns with detailed surface characteristics. CONCLUSION In this study, the digital reference crown models of the primary teeth were established by reverse engineering technology, providing reference value for the standardized crown models and application for clinical practice, scientific research and teaching.Furthermore, this study also contributes to the extensive application of CAD/CAM technology in pediatric dentistry and the development of CAD/CAM dental systems with independent intellectual property rights.
Child ; Computer-Aided Design ; Crowns ; Dental Prosthesis Design ; Female ; Humans ; Male ; Software ; Tooth Crown ; Tooth, Deciduous