OBJECTIVES: This study aimed to evaluate the long-term clinical efficacy of simple taper retentive implants in the posterior dental area after immediate implantation for 5-7 years. METHODS: Selected from January 2015 to December 2017 in the Fourth Affiliated Hospital of Nanchang University dental clinic line tooth area immediately after the implant prosthesis, a total of 38 patients, 53 implants, were deep into (bone under 2 mm or higher) and the upper structure was repaired. In addition, after the completion of tracking observation of 60-90 months, the implant surrounding bone health was recorded and analyzed. RESULTS: After 5-7 years of follow-up, 1 of the 53 implants failed to fall out, and the implant retention rate was 98.1%. The amount of bone resorption in the proximal and distal margins 5-7 years after implant restoration was (0.16±0.94) mm and (-0.01±1.29) mm, respectively, and the difference in bone height between the proximal and distal margins of the implant and the immediate post-restoration period was not statistically significant (P>0.05). No statistically significant differences were found in the effects of periodontitis, implant site inflammation, and smoking on peri-implant marginal bone resorption (P>0.05). CONCLUSIONS The single taper-retained implant broadens the indications for immediate implant placement in the posterior region, and its deep sub-osseous placement (≥2 mm below the bone) avoids to a certain extent the disturbance of the implant by external stimuli and the exposure of the cervical abutment of the implant, with the good long-term stability of the marginal bone around the implant.
Humans ; Dental Implantation, Endosseous ; Dental Implants ; Immediate Dental Implant Loading ; Follow-Up Studies ; Dental Implants, Single-Tooth ; Alveolar Bone Loss/surgery* ; Treatment Outcome ; Dental Prosthesis, Implant-Supported ; Dental Restoration Failure

OBJECTIVES: This study aimed to explore the stress distribution of surface-mounted inlays with two ceramic materials and different strategies for fiber post-restoration on pulp-penetrating non-carious cervical lesion in a maxillary first premolar to provide minimally invasive and reasonable restorative methods. METHODS: The cone beam computed tomography data of the standard right upper first premolar were selected. Healthy control (HC) and defective control (DC) finite element models were established. Then, eight experimental models were established according to two different ceramic materials (IPS e.max CAD [LD] and Lava Ultimate [LU]) and different locations of fiber post (without fiber post [NP], fiber post in buccal root canal [B], fiber post in palatal root canal [P], fiber post in both root canals [BP]), namely, LD_NP, LD_B, LD_P, LD_BP, LU_NP, LU_B, LU_P, and LU_BP. Axial load F1 and lateral load F2 were applied. Maximum principal stress and displacement of the buccal tip were investigated using finite element analysis software. Then, the percentage change of the following indicators in each experimental group was analyzed: stress of defective tip with group DC, stress of enamel and dentine, and displacement of buccal tips with group HC. It was considered similar when the percentage change was less than 5%. RESULTS: LD and LU groups could effectively reduce the stress of the defective tip, but the decreasing amplitude in the former was greater than that of the latter. For the stress of surface-mounted inlays and resin adhesive layer, LD groups were higher than LU groups, and no significant difference in stress peak was found among different experimental groups in the same material. In addition, fiber posts in double root canals could significantly reduce buccal tip displacement. CONCLUSIONS For pulp-penetrating non-carious cervical lesions, the restorative strategy of surface-mounted inlays could be applied. Compared with Lava Ultimate, IPS e.max CAD could better protect the defective tip tooth. Furthermore, fiber posts in double root canals could decrease overall deformation and increase the retention of surface-mounted inlays.
Inlays ; Finite Element Analysis ; Composite Resins ; Bicuspid ; Ceramics ; Dental Stress Analysis

The dental operative microscope has been widely employed in the field of dentistry, particularly in endodontics and operative dentistry, resulting in significant advancements in the effectiveness of root canal therapy, endodontic surgery, and dental restoration. However, the improper use of this microscope continues to be common in clinical settings, primarily due to operators' insufficient understanding and proficiency in both the features and established operating procedures of this equipment. In October 2019, Professor Jingping Liang, Vice Chairman of the Society of Cariology and Endodontology, Chinese Stomatological Association, organized a consensus meeting with Chinese experts in endodontics and operative dentistry. The objective of this meeting was to establish a standard operation procedure for the dental operative microscope. Subsequently, a consensus was reached and officially issued. Over the span of about four years, the content of this consensus has been further developed and improved through practical experience.
Humans ; Dentistry, Operative ; Consensus ; Endodontics ; Root Canal Therapy ; Dental Care

OBJECTIVE: To compare the effects of resin base and different retention depth on the fracture resistance of mandibular molars restored with nano-ceramic endocrowns. METHODS: Forty mandibular molars selected and randomly divided into 5 groups: ① The control group which was consisted of intact teeth, ② the non-resin base group, ③ the 2 mm retention depth group, ④ the 3 mm retention depth group, ⑤ the 4 mm retention depth group, respectively. After tooth preparation, in vitro root canal therapy was conducted, which was followed by endocrown design, production and adhesive of groups ②-⑤. All the samples were under load (N) of the universal mechanical testing machine after embedding. The fracture pattern of each sample was observed under stereomicroscope. Then the microstructure of the fracture surface was observed by scanning electron microscopy. RESULTS: The fracture loads of each group were respectively: the control group fracture load was (3 069.34±939.50) N; experimental groups: fracture load of (2 438.04±774.40) N for the group without resin base; fracture load of (3 537.18±763.65) N for the group with 2 mm retention depth. The fracture load of the retention depth 3 mm group was (2 331.55±766.39) N; the fracture load of the retention depth 4 mm group was (2 786.98±709.24) N. There was statistical significance in the effect of resin base and different retention depth on the fracture loads of molars restored with nano-ceramic endocrown (P < 0.05). Repairable fractures in each group were as follows: control group 2/8, non-resin base group 1/8, retention depth of 2 mm group 1/8, retention depth of 3 mm group 2/8, and retention depth of 4 mm group 0/8. The effects of the retention depth and the presence of resin base on the fracture resistance of the resin nano-ceramic endocrowns were statistically significant (P < 0.05). Scanning electron microscopy showed more arrest lines and small twist hackles on the fracture surface of the restorations with resin base (retention depths of 2 mm, 3 mm, and 4 mm), with cracks extending towards the root. In addition to the characteristics above, more transverse cracks parallel to the occlusal surface, pointing outwards from the center of the pulp cavity retention, were also observed on the fracture surface of the non-resin base restorations. CONCLUSION When molar teeth with nano-ceramic endocrowns are restored, resin base and the retention depth of 2 mm help the teeth to obtain optimal fracture strength.
Ceramics ; Composite Resins ; Dental Porcelain ; Dental Restoration Failure ; Dental Stress Analysis ; Materials Testing ; Molar

ABSTRACT Implant periapical lesion (IPL) is also known as retrograde peri-implantitis and as the name suggests, it involves inflammation surrounding the apical part of the dental implants. Previously, many studies have reported the event of IPL that further delays osseointegration, and some reported failure of implant placement due to this disease. In this article, we described two cases of early dental implant failure that was associated with active IPL and correlated the clinical and radiographical findings with the histopathological findings.
Dental Restoration Failure ; Dental Implants--adverse effects ; Periapical Tissue

Recently, among the edentulous patients who undergo dental implants, the proportion of hypertensive patients remains high, which poses a greater challenge for clinicians to operate and to maintain the therapeutic effect. The present review comprehensively summarized clinical researches about the adverse effects on dental implants, outlined molecular mechanisms of the positive effects of various antihypertensive drugs on bone metabolism, and proposed that clinicians should select preventive strategies during preoperative and intraoperative procedures according to the blood pressure of patients with hypertension.
Alveolar Bone Loss ; Dental Implantation, Endosseous/methods* ; Dental Implants ; Dental Prosthesis, Implant-Supported ; Dental Restoration Failure ; Humans ; Hypertension/surgery* ; Jaw, Edentulous ; Maxilla/surgery* ; Risk Assessment

OBJECTIVE: To evaluate the type of wound healing following modified crown lengthening surgery in dog model to provide a biological basis for its clinical application. METHODS: Flap surgery, traditional crown lengthening procedure and modified crown lengthening procedure were performed on the right maxillary central incisor, the left maxillary central incisor and the left maxillary first lateral incisor respectively of five male beagle dogs. The right maxillary first lateral incisors with no surgical intervention were used as controls. Thirty-six weeks after the experimental procedure, tissue blocks were harvested and prepared for histological examination and analysis. RESULTS: Histometric examination of buccolingual sections stained with hematoxylin-eosin demonstrated that the type of wound healing in the flap surgery group was re-attachment, similar to the control group. For the traditional crown lengthening surgery group, all of the five beagle dogs had lamellar cementum defects on root surface, the wound healing of four beagle dogs was new attachment accompanied by new cementum formation at cementum defect areas and the suprac-restal connective tissue was functionally oriented perpendicular to the new cementum. The wound healing of the other beagle dog was long junctional epithelial attachment, in which the junctional epithelium extended to the apical terminus of the cementum defect. In the modified crown lengthening surgery group, four beagle dogs had cementum defects on root surface (two lamellar cementum defects and two shallow platform-like cementum defects), the wound healing of three beagle dogs was new attachment, however, the supracrestal connective tissue was parallel to the root surface. The type of wound healing of another one beagle dog was long junctional epithelial attachment. Wound healing of one beagle dog in this group could not be characterized due to incomplete dissection. CONCLUSION Wound healing in the modified crown lengthening surgery group was similar to the traditional crown lengthening surgery group, and two types of wound healing were observed: new attachment and long junctional epithelium attachment. Neither type of root treatment procedure (root planing or root reshaping) nor root surface defect pattern (the lamellar cementum defect or shallow platform-like cementum defect) influenced the observed type of wound healing.
Animals ; Connective Tissue ; Crown Lengthening ; Dogs ; Eosine Yellowish-(YS) ; Epithelial Attachment/pathology* ; Hematoxylin ; Male ; Tooth Root/surgery* ; Wound Healing

OBJECTIVE: To evaluate the effects of different edge compensation angles on the fracture strength of multilayer zirconia all-ceramic crowns and traditional uniform zirconia all-ceramic crowns. METHODS: The resin tooth preparation specimen of the mandibular first molar with a knife-edge was fabricated. A 3D digital model of the specimen was obtained by scanning it with a 3D dental model scanner. The 3D digital model was imported into computer aided design (CAD) software, and three 3D digital models of the full crown with the same surface shape are designed with the edge compensation angles of 30°, 45° and 60°, respectively. Then, the designed 3D digital model is imported into computer aided manufacturing (CAM) software. Three kinds of multilayer and homogeneous zirconia all-porcelain crowns with different edge compensation angles were fabricated, 10 each for a total of 60. The fracture load of each crown was measured under the electronic universal testing machine. RESULTS: Fracture load of multilayer and uniform zirconia all-ceramic crowns, (4 322.86±610.07) N and (5 914.12±596.80) N in the 30° group, (5 264.82±883.76) N and (5 220.83±563.38) N in the 45° group and (4 900.42±345.41) N and (5 050.22±560.24) N in the 60° group, respectively. The fracture load of multi-layer zirconia all-ceramic crowns in the 30° group was significantly lower than that of homogeneous zirconia all-ceramic crowns(P < 0.05); there was no statistical significance in 45° group and 60° group(P>0.05). In the multi-layer zirconia all-ceramic crowns: the fracture load of the 30° group was significantly lower than that of the 45° group (P < 0.05); there was no significant difference between the 30° group and the 60° group, the 45° group and the 60° group (P>0.05).In uniform zirconia full crown group: the 30° group was higher than the 45° group, the 30° group was higher than the 60° group (P < 0.05), and there was no significant difference between the 45° group and the 60° group (P>0.05). CONCLUSION The fracture loads of three kinds of uniform and multilayer zirconia all ceramic crowns with different edge compensation angles can meet the clinical requirements. A smaller edge compensation angle is recommended when using traditional zirconia all-ceramic crowns, while 45° is recommended when using multi-layer zirconia all-ceramic crowns.
Ceramics ; Computer-Aided Design ; Crowns ; Dental Porcelain ; Dental Prosthesis Design ; Dental Restoration Failure ; Dental Stress Analysis ; Flexural Strength ; Materials Testing ; Zirconium

OBJECTIVE: To analyze the clinical curative effect after 5-year follow-up of single tooth implant-supported restorations in the posterior region. METHODS: In the study, patients with single tooth implant-supported restorations in the posterior region after loading 5-year in the Second Clinical Division of Peking University School and Hospital of Stomatology from October 2005 to May 2010 was enrolled. The implant survival rate, prosthetic conditions (including the structural integrity or loosening of the prosthesis, the retention of the materials used to fill access holes of screw-retained implant crowns, loosening or fractures of the implant abutment or screw) and marginal bone lever level around implants were determined by clinical and radiographic examination. RESULTS: The study was composed of 215 patients, the mean age was 48.6 years (range: 27 to 71), and 321 soft tissue implants were inserted. There were 9 implants loose and lost during the visit, the cumulative success rate was 97.2%. In the 312 remaining implants, 120 implants were placed in the upper jaws (38.5%) and 192 in the lower jaws (61.5%). Three different diameters as 3.3 mm (5 implants), 4.1 mm (115 implants) and 4.8 mm (192 implants) and three different lengths as 8 mm (21 implants), 10 mm (206 implants) and 12 mm (85 implants) were used, respectively. 277 (88.8%) cement-retained and 35 (11.2%) screw-retained implant-supported single crowns were made. The marginal bone loss (MBL) around dental implants after loading 5 years in the mesial and distal sides were (0.73±0.25) mm and (0.78±0.26) mm, respectively. There was no significant difference among MBL and bone quality, implant type, angle of abutment, prosthodontic type, crown-to-implant ratio, gender, and age of the patients (P > 0.05). The major mechanical complications after restoration involved loosening (8.6%) and fracture (2.9%) of the crown retainer screw, loss of resin covering the screw (11.4%), and the most frequent mechanical complications were loss of crown retention (14.1%) and fracture of porcelain (13.8%). The incidence of loss of crown retention was correlated with insufficient clinical crown height or using angle abutment (P < 0.05). CONCLUSION After loading 5 years, the bone level around the soft-tissue-implant placed in posterior region was stable. To minimize the frequency of mechanical complications after restoration, protocols must be established from diagnosis to the completion of treatment and follow up of implant-supported prostheses, especially in terms of adequate technical steps and careful radiographic evaluation of the components.
Crowns ; Dental Implants ; Dental Implants, Single-Tooth ; Dental Prosthesis Design ; Dental Prosthesis, Implant-Supported ; Dental Restoration Failure ; Follow-Up Studies ; Humans ; Middle Aged ; Survival Rate

OBJECTIVE: To evaluate the morphology accuracy of direct occlusal veneer using two types of modified stamp-technique, comparing the Results of two types of stamp and different composite resin. METHODS: Model scanner was used to get the original data from the standard resin teeth in plastic model. Two types of stamps were made: solid silicon stamp and transparent silicon stamp. In the study, 54 resin tooth were randomly divided into 9 groups: Groups 1-8 were restored by direct composite resin, using general and bulk-filled composite resin in occlusal veneer (1 mm or 2 mm) with two types of stamp-technique (the solid silicon, and the transparent silicon), and the control group was restored by indirect way using CAD/CAM composite resin restoration by biocopy technique to mimic the original shape of the teeth. After the resin teeth were prepared for occlusal veneer, the direct and indirect composite resins were restored. After the restoration was finished, the data were obtained again by the same model scanner in the plastic model. 3D comparisons were made using the original and restoration data, the average difference and the root mean square of difference (RMS) were recoded from the software. The RMS of all the groups were analyzed using one way ANOVA (α=0.05). RESULTS: The RMS of occlusal surface in solid silicon stamp group was (0.136±0.031) mm, in transparent silicon group was (0.130±0.024) mm, and in control group was (0.130±0.009) mm. There were no significant difference. While the RMS of buccal/lingual surface in solid silicon stamp group was the smallest [(0.135±0.020) mm, P < 0.05], and in transparent silicon group it was (0.147±0.021) mm, and control group (0.153±0.014) mm. The general composite resin using the two types of stamp had the largest occlusal RMS in 2 mm occlusal veneer, which were significantly larger than control group (P < 0.05). CONCLUSION The direct occlusal veneer using two types of modified "stamp-technique" had relatively good morphology accuracy. Direct occlusal veneer using bulk-filled composite resin made with two types of stamp technique had even more accurate morphology than using general composite resin. The solid silicon stamp had a better morphology accuracy in buccal/lingual surface than the transparent silicon stamp.
Composite Resins ; Computer-Aided Design ; Dental Restoration, Permanent ; Humans ; Materials Testing ; Tooth ; Tooth Fractures