OBJECTIVE: To predict the learning curve of tooth preparation for all ceramic crowns of maxillary central incisors on phantom head simulators for graduate students participating in standardized dental resident training based on the modified Wright learning curve model, then to analyze and applicate the learning curve. METHODS: Twelve graduate students participating in standardized dental resident training were selected to prepare the resin maxillary central incisors on phantom head simulators for all ceramic crowns 4 times. The results of preparation were evaluated by 3 prosthetic experts with at least 10 years' experience focusing on the reduction, contour, taper, shoulder, finish line, margin placement, adjacent tooth injury, and preparation time for tooth preparation. The learning rate of tooth preparation was calculated by scores of tooth preparation of 4 times. The learning curve of tooth preparation was predicted based on the modified Wright learning curve model. According to the criteria of standardized training skill examinations for dental residents in Beijing, 80 was taken as the qualified standard score. The minimum training times for tooth preparation to satisfy the qualified standard score (80) was calculated, to analyze the characteristics of learning curve and evaluate the effectiveness of tooth preparation. RESULTS: The scores of 4 tooth preparation were 64.03±7.80, 71.40±6.13, 74.33±5.96, and 75.98±4.52, respectively. The learning rate was (106±4)%, which showed the learning curve an upward trend. There were no significant differences between the qualified standard score and the predicted scores of tooth preparation from the 5^th preparation to the 13^th preparation (P > 0.05). The predicted score of the 14^th preparation was higher than the qualified standard score (P < 0.05). CONCLUSION The trend of the learning curve of tooth preparation for all ceramic crowns of maxillary central incisors on phantom head simulators for graduate students participating in standardized dental resident training is upward, which predicts the minimum training times higher than the qualified standard score is 14 times.
Humans ; Tooth Preparation, Prosthodontic/methods* ; Incisor ; Learning Curve ; Crowns ; Tooth Preparation ; Ceramics ; Dental Porcelain ; Dental Prosthesis Design

According to the fourth national oral health epidemiological survey report (2018), billions of teeth are lost or missing in China, inducing chewing dysfunction, which is necessary to build physiological function using restorations. Digital technology improves the efficiency and accuracy of oral restoration, with the application of three-dimensional scans, computer-aided design (CAD), computer-aided manufacturing (CAM), bionic material design and so on. However, the basic research and product development of digital technology in China lack international competitiveness, with related products basically relying on imports, including denture 3D design software, 3D oral printers, and digitally processed materials. To overcome these difficulties, from 2001, Yuchun Sun's team, from Peking University School and Hospital of Stomatology, developed a series of studies in artificial intelligence design and precision bionics manufacturing of complex oral prostheses. The research included artificial intelligence design technology for complex oral prostheses, 3D printing systems for oral medicine, biomimetic laminated zirconia materials and innovative application of digital prosthetics in clinical practice. The research from 2001 to 2007 was completed under the guidance of Prof. Peijun Lv and Prof. Yong Wang. Under the support of the National Natural Science Foundation of China, the National Science and Technology Support Program, National High-Tech R & D Program (863 Program) and Beijing Training Project for the Leading Talents in S & T, Yuchun Sun's team published over 200 papers in the relevant field, authorized 49 national invention patents and 1 U.S. invention patent and issued 2 national standards. It also developed 8 kinds of core technology products in digital oral prostheses and 3 kinds of clinical diagnosis and treatment programs, which significantly improved the design efficiency of complex oral prostheses, the fabrication accuracy of metal prostheses and the bionic performance of ceramic materials. Compared with similar international technologies, the program doubled the efficiency of bionic design and manufacturing accuracy and reduced the difficulty of diagnosis and cost of treatment and application by 50%, with the key indicators of those products reaching the international leading level. This program not only helped to realize precision, intelligence and efficiency during prostheses but also provided functional and aesthetic matches for patients after prostheses. The program was rewarded with the First Technical Innovation Prize of the Beijing Science and Technology Awards (2020), Gold Medal of Medical Research Group in the First Medical Science and Technology Innovation Competition of National Health Commission of the People's Republic of China (2020) and Best Creative Award in the First Translational Medical Innovation Competition of Capital (2017). This paper is a review of the current situation of artificial intelligence design and precision bionics manufacturing of complex oral prosthesis.
Artificial Intelligence ; Bionics ; Computer-Aided Design ; Dental Prosthesis Design ; Humans ; Printing, Three-Dimensional ; Prostheses and Implants

OBJECTIVE: To explore the construction process of the digital reference crown models, and to initially establish the digital reference crown models of the primary teeth to lay the foundation for the establishment of the standardized crown models and the future related applications of computer-aided design/computer-aided manufacture (CAD/CAM) technology to pediatric dentistry. METHODS: This study randomly selected children who were caries free, aged from 4 to 5 years in several kindergartens of Haidian District of Beijing.Plaster dental models were made for the children after taking complete impressions.The digital dental models were reconstructed by using the three-dimensional (3D) dental model scanner.And then, Geomagic Studio, a 3D reverse engineering software, was employed to extract the single dental crown data, the mesiodistal and buccolingual diameters and the height of the crowns were measured.The object was reduced or enlarged by a numerical factor, and then the size of each dental crown was standardized.A total of 3-5 points features on the crown were created, and all the objects were aligned through the functions of feature-based alignment.Finally, through average-based object creation and smoothing, the digital models of reference crowns of the primary teeth were established. RESULTS: A total of 40 plaster dental models from 16 boys and 26 girls were selected out for our further study.The digital dental models were reconstructed, and the mesiodistal and buccolingual diameters and the height of the crowns were measured by using reverse engineering technology.Comparing the results of using mesiodistal diameter, buccolingual diameter and height as the standards, we chose the mesiodistal diameters of crowns to do the standardization, and successfully established the digital reference models of 20 primary teeth crowns with detailed surface characteristics. CONCLUSION In this study, the digital reference crown models of the primary teeth were established by reverse engineering technology, providing reference value for the standardized crown models and application for clinical practice, scientific research and teaching.Furthermore, this study also contributes to the extensive application of CAD/CAM technology in pediatric dentistry and the development of CAD/CAM dental systems with independent intellectual property rights.
Child ; Computer-Aided Design ; Crowns ; Dental Prosthesis Design ; Female ; Humans ; Male ; Software ; Tooth Crown ; Tooth, Deciduous

Based on evidence-based clinical and material researches, the Society of Prosthodontics, Chinese Stomatological Association organized a panel of experts to write a recommended application guideline via in-depth discussion and literature reviewing. This guideline formulates the standardized operation procedures for the clinical usage of chairside computer aided design and computer aided manufacturing (CAD/CAM) rehabilitation with resin-ceramic composites, aiming at guiding and specifying this clinical technique. This guideline will help to improve the quality, the clinical efficacy, and the long-term success rate of chairside CAD/CAM rehabilitation with resin-ceramic composites via standardizing this restoration technique. At the same time, this guideline will contribute to the clinical promotion of this technique.
Ceramics ; Composite Resins ; Computer-Aided Design ; Dental Prosthesis Design ; Prosthodontics

With the rapid development of digital techniques and the lack of reference standards for chairside computer aided design and computer aided manufacturing (CAD/CAM) operation and application, it is imperative to draft guidelines for chairside CAD/CAM restoration techniques for all ceramics. Therefore, the Society of Prosthodontics, Chinese Stomatological Association recruited experts to compose a recommended application guideline based on the relevant literatures and clinical experiences, including the selection of indications, tooth preparation, optical impression making and other key steps. This guideline is aimed at providing a standardized operation procedure to improve the quality and long-term success rate of chairside CAD/CAM rehabilitation for all ceramics.
Dental Prosthesis Design ; Computer-Aided Design ; Ceramics ; Prosthodontics ; Dental Porcelain

The minimally invasive fixed occlusal reconstruction of dentition defect is a sequential reconstruction process involving the minimally invasive restoration of the remaining natural teeth, the implant restoration of edentulous areas and the occlusal change from reversible to non-reversible. The simultaneous completion of minimally invasive natural teeth restorations and implant-supported crowns or bridges in an ideal occlusal design shows the obvious advantages of digital integration. The use of digital technologies such as intraoral scanning, kinematic face bow, virtual articulator and computer aided design and computer aided manufacturing (CAD/CAM), could be integrated in each stage of occlusal reconstruction, including the overall documentations and assessments before the restoration, the determination of the functional restoration space, the precise design and fabrication of the provisional and final restorations taking into account both esthetics and function and the preservation of the follow-up documentations and assessments after the restoration. The integration process can optimize clinical process and improve restoration accuracy. This article briefly describes the concept of minimally invasive occlusal reconstruction of dentition defects and the integration strategy of digital sequential restoration.
Humans ; Dentition ; Dental Implants ; Esthetics, Dental ; Mouth, Edentulous ; Computer-Aided Design ; Crowns ; Dental Prosthesis Design

Objective: To evaluate the clinical outcomes of computer aided design and computer aided manufacturing (CAD/CAM) ceramic endocrowns in endodontically treated posterior teeth after five years by a retrospective study. Methods: Patients who received CAD/CAM ceramic endocrowns after endodontically treatment in Department of Endodontics, School of Stomatology, The Fourth Military Medical University between January 2016 and June 2017 were invited for this clinical study. Clinical performance was evaluated in the aspect of color match, anatomic form,marginal adaptation, restoration integrity and secondary caries. Survival rate of the restorations was calculated by the use of Kaplan-Meier method. Log-rank test was applied as well for the sake of analyzing the effect of tooth position, sex and materials to the survival rate of the restorations. Results: Seventy-four patients, 25 men and 49 women with age of (38.8±10.2) years, participated in this study for a total of 101 CAD/CAM ceramic endocrowns after observation period of (62.8±12.0) months. There were 8 failed cases among 101 restorations, 5 were loss of retention, 2 were ceramic fracture and 1 was secondary caries respectively. In particular, 93% (89/96) restorations got score A on anatomic form and 95% (91/96) restorations got score A on marginal adaptation, while 38% (36/96) restorations showed the good color match compared with the abutment teeth. The estimated cumulative survival rate of CAD/CAM ceramic endocrowns in endodontically treated posterior teeth after 5 years was 93.0% (95%CI: 87.9%-98.1%). The single-factor Log-rank analysis demonstrated that there was no statistically significant difference in the survival rate of CAD/CAM ceramic endocrowns among men and women, premolars and molars, position in the dental arch, or different materials (χ²<0.01, P=0.957; χ²=0.64, P=0.422; χ²=0.69, P=0.407; χ²=0.88, P=0.349). Conclusions: Based on this clinical study, the clinical performance of CAD/CAM ceramic endocrowns in endodontically treated posterior teeth after five years is reliable, which could be a general option to restore nonvital teeth.
Humans ; Male ; Female ; Adult ; Middle Aged ; Crowns ; Dental Porcelain/therapeutic use* ; Retrospective Studies ; Dental Prosthesis Design ; Dental Stress Analysis ; Materials Testing ; Computer-Aided Design ; Ceramics

The tilted implantation technique is characterized by placing the implant at an angle of more than 15° and less than 45° from the horizontal plane. This technique can avoid damaging the maxillary sinus, inferior alveolar nerve, nasal base, and other anatomical structures when the height of the upper and lower jaw available bone is insufficient, to maximize the use of available bone and avoid a large range of bone increment. The tilted implantation technique can reduce the trauma of the surgery, increase the possibility of immediate restoration and shorten the treatment cycle, which has been widely used clinically. In this review, the scope of application, design elements, design scheme and complications of the tilted implantation technique for edentulous patients will be described.
Alveolar Bone Loss ; Dental Implantation, Endosseous ; Dental Implants ; Dental Prosthesis Design ; Dental Prosthesis, Implant-Supported ; Follow-Up Studies ; Humans ; Jaw, Edentulous/surgery* ; Mandible ; Maxilla/surgery* ; Maxillary Sinus/surgery* ; Mouth, Edentulous/surgery*

OBJECTIVE: To evaluate the effects of different edge compensation angles on the fracture strength of multilayer zirconia all-ceramic crowns and traditional uniform zirconia all-ceramic crowns. METHODS: The resin tooth preparation specimen of the mandibular first molar with a knife-edge was fabricated. A 3D digital model of the specimen was obtained by scanning it with a 3D dental model scanner. The 3D digital model was imported into computer aided design (CAD) software, and three 3D digital models of the full crown with the same surface shape are designed with the edge compensation angles of 30°, 45° and 60°, respectively. Then, the designed 3D digital model is imported into computer aided manufacturing (CAM) software. Three kinds of multilayer and homogeneous zirconia all-porcelain crowns with different edge compensation angles were fabricated, 10 each for a total of 60. The fracture load of each crown was measured under the electronic universal testing machine. RESULTS: Fracture load of multilayer and uniform zirconia all-ceramic crowns, (4 322.86±610.07) N and (5 914.12±596.80) N in the 30° group, (5 264.82±883.76) N and (5 220.83±563.38) N in the 45° group and (4 900.42±345.41) N and (5 050.22±560.24) N in the 60° group, respectively. The fracture load of multi-layer zirconia all-ceramic crowns in the 30° group was significantly lower than that of homogeneous zirconia all-ceramic crowns(P < 0.05); there was no statistical significance in 45° group and 60° group(P>0.05). In the multi-layer zirconia all-ceramic crowns: the fracture load of the 30° group was significantly lower than that of the 45° group (P < 0.05); there was no significant difference between the 30° group and the 60° group, the 45° group and the 60° group (P>0.05).In uniform zirconia full crown group: the 30° group was higher than the 45° group, the 30° group was higher than the 60° group (P < 0.05), and there was no significant difference between the 45° group and the 60° group (P>0.05). CONCLUSION The fracture loads of three kinds of uniform and multilayer zirconia all ceramic crowns with different edge compensation angles can meet the clinical requirements. A smaller edge compensation angle is recommended when using traditional zirconia all-ceramic crowns, while 45° is recommended when using multi-layer zirconia all-ceramic crowns.
Ceramics ; Computer-Aided Design ; Crowns ; Dental Porcelain ; Dental Prosthesis Design ; Dental Restoration Failure ; Dental Stress Analysis ; Flexural Strength ; Materials Testing ; Zirconium

OBJECTIVE: To analyze the clinical curative effect after 5-year follow-up of single tooth implant-supported restorations in the posterior region. METHODS: In the study, patients with single tooth implant-supported restorations in the posterior region after loading 5-year in the Second Clinical Division of Peking University School and Hospital of Stomatology from October 2005 to May 2010 was enrolled. The implant survival rate, prosthetic conditions (including the structural integrity or loosening of the prosthesis, the retention of the materials used to fill access holes of screw-retained implant crowns, loosening or fractures of the implant abutment or screw) and marginal bone lever level around implants were determined by clinical and radiographic examination. RESULTS: The study was composed of 215 patients, the mean age was 48.6 years (range: 27 to 71), and 321 soft tissue implants were inserted. There were 9 implants loose and lost during the visit, the cumulative success rate was 97.2%. In the 312 remaining implants, 120 implants were placed in the upper jaws (38.5%) and 192 in the lower jaws (61.5%). Three different diameters as 3.3 mm (5 implants), 4.1 mm (115 implants) and 4.8 mm (192 implants) and three different lengths as 8 mm (21 implants), 10 mm (206 implants) and 12 mm (85 implants) were used, respectively. 277 (88.8%) cement-retained and 35 (11.2%) screw-retained implant-supported single crowns were made. The marginal bone loss (MBL) around dental implants after loading 5 years in the mesial and distal sides were (0.73±0.25) mm and (0.78±0.26) mm, respectively. There was no significant difference among MBL and bone quality, implant type, angle of abutment, prosthodontic type, crown-to-implant ratio, gender, and age of the patients (P > 0.05). The major mechanical complications after restoration involved loosening (8.6%) and fracture (2.9%) of the crown retainer screw, loss of resin covering the screw (11.4%), and the most frequent mechanical complications were loss of crown retention (14.1%) and fracture of porcelain (13.8%). The incidence of loss of crown retention was correlated with insufficient clinical crown height or using angle abutment (P < 0.05). CONCLUSION After loading 5 years, the bone level around the soft-tissue-implant placed in posterior region was stable. To minimize the frequency of mechanical complications after restoration, protocols must be established from diagnosis to the completion of treatment and follow up of implant-supported prostheses, especially in terms of adequate technical steps and careful radiographic evaluation of the components.
Crowns ; Dental Implants ; Dental Implants, Single-Tooth ; Dental Prosthesis Design ; Dental Prosthesis, Implant-Supported ; Dental Restoration Failure ; Follow-Up Studies ; Humans ; Middle Aged ; Survival Rate