Humans ; Esthetics, Dental ; Dental Implantation, Endosseous ; Dental Implants, Single-Tooth

OBJECTIVE: To investigate whether the placement of absorbable collagen membrane increase the stability of alveolar ridge contour after guided bone regeneration (GBR) using buccal punch flap. METHODS: From June 2019 to June 2023, patients who underwent GBR using buccal punch flap simultaneously with a single implant placement in posterior region (from first premolar to second molar) were divided into coverage group, in which particular bone graft was covered by collagen membrane and non-coverage group. Cone beam CT (CBCT) was taken before surgery (T0), immediately after surgery (T1), and 3-7 months after surgery (T2), and the thickness of the buccal bone plate at different levels (0, 2, 4, and 6 mm) below the smooth-rough interface of the implant (BBT-0, -2, -4, -6) was mea-sured after superimposition of CBCT models using Mimics software. RESULTS: A total of 29 patients, including 15 patients in coverage group and 14 patients in non-coverage group, were investigated in this study. At T0, T1, and T2, there was no significant difference in BBT between the two groups (P>0.05). At T1, BBT-0 was (2.50±0.90) mm in the coverage group and (2.97±1.28) mm in the non-coverage group, with corresponding BBT-2 of (3.65±1.08) mm and (3.58±1.26) mm, respectively. At T2, BBT-0 was (1.22±0.55) mm in the coverage group and (1.70±0.97) mm in the non-coverage group, with corresponding BBT-2 of (2.32±0.94) mm and (2.57±1.26) mm, respectively. From T1 to T2, there were no statistically significant differences in the absolute values [(0.47±0.54)-(1.33±0.75) mm] and percentages [(10.04%±24.81%)-(48.43%±18.32%)] of BBT change between the two groups. The thickness of new bone formation in the buccal bone plate from T0 to T2 ranged from (1.27±1.09) mm to (2.75±2.15) mm with no statistical difference between the two groups at all levels. CONCLUSION In the short term, the GBR using buccal punch flap with or without collagen membrane coverage can effectively repair the buccal implant bone defect. But collagen membrane coverage showed no additional benefit on alveolar ridge contour stability compared with non-membrane coverage.
Humans ; Cohort Studies ; Retrospective Studies ; Alveolar Ridge Augmentation ; Collagen ; Cone-Beam Computed Tomography ; Bone Regeneration ; Dental Implantation, Endosseous

Jaw defects caused by various reasons often seriously affect appearance and function. The goal of the treatment of oral and maxillofacial tumors should include the cure of the tumor and the restoration of premorbid function. The development of microsurgery and digital surgery technology has promoted the development of jaw reconstruction with vascularized free bone flap. Good appearance and improved predictability could be obtained with the help of preope-rative visual design. How to rehabilitate occlusal function on the reconstructed jaw and improve the quality of life of patients has become an important research direction. This article discusses the challenge of jaw reconstruction, the selection of vascularized bone flap, the choice of implant timing, the treatment of peri-implant soft tissue, and the influence of radiotherapy on implants after jaw reconstruction.
Humans ; Dental Implants ; Plastic Surgery Procedures ; Free Tissue Flaps/surgery* ; Quality of Life ; Dental Implantation, Endosseous ; Fibula/surgery* ; Bone Transplantation ; Mandibular Reconstruction

When selecting implant guidance methods or judging whether the patient can be implanted, many doctors ignore or only use visual inspection to estimate a patient's mouth opening. This phenomenon often leads to failure to complete the implantation due to insufficient mouth opening or the deflection of the implant due to limited angle, resulting in the high incidence of corresponding complications. The main reason is that doctors lack accurate analysis and control of the overall geometric conditions of the intraoral surgical area, and three-dimensional position blocking of surgical instruments occurs during the operation. In the past, mouth opening was defined as the distance between the incisor edges of the upper and lower central incisors when the patient opens his mouth widely, and the implant area could be in any missing tooth position. When it is in the posterior tooth area, the specific measurement scheme of the mouth opening could not be simply equivalent to the previous measurement method in the anterior tooth area. However, how to measure quickly and conveniently the mouth opening of any surgical area to determine whether it could be implanted and meet the needs of the selected guidance method remains unclear. This paper introduces new concepts, establishes new classification and corresponding accurate measurement scheme of implant area, and establishes a decision tree of implant methods guided by the actually measured value. Results provide a quantitative basis for rational formulation and implementation of implant treatment.
Humans ; Mouth ; Dental Implantation, Endosseous/methods* ; Incisor ; Clinical Decision-Making ; Dental Implants

OBJECTIVES: This study aimed to evaluate the long-term clinical efficacy of simple taper retentive implants in the posterior dental area after immediate implantation for 5-7 years. METHODS: Selected from January 2015 to December 2017 in the Fourth Affiliated Hospital of Nanchang University dental clinic line tooth area immediately after the implant prosthesis, a total of 38 patients, 53 implants, were deep into (bone under 2 mm or higher) and the upper structure was repaired. In addition, after the completion of tracking observation of 60-90 months, the implant surrounding bone health was recorded and analyzed. RESULTS: After 5-7 years of follow-up, 1 of the 53 implants failed to fall out, and the implant retention rate was 98.1%. The amount of bone resorption in the proximal and distal margins 5-7 years after implant restoration was (0.16±0.94) mm and (-0.01±1.29) mm, respectively, and the difference in bone height between the proximal and distal margins of the implant and the immediate post-restoration period was not statistically significant (P>0.05). No statistically significant differences were found in the effects of periodontitis, implant site inflammation, and smoking on peri-implant marginal bone resorption (P>0.05). CONCLUSIONS The single taper-retained implant broadens the indications for immediate implant placement in the posterior region, and its deep sub-osseous placement (≥2 mm below the bone) avoids to a certain extent the disturbance of the implant by external stimuli and the exposure of the cervical abutment of the implant, with the good long-term stability of the marginal bone around the implant.
Humans ; Dental Implantation, Endosseous ; Dental Implants ; Immediate Dental Implant Loading ; Follow-Up Studies ; Dental Implants, Single-Tooth ; Alveolar Bone Loss/surgery* ; Treatment Outcome ; Dental Prosthesis, Implant-Supported ; Dental Restoration Failure

Using digital technologies in concurrently performing missing tooth implantation and preparation of remaining teeth is a solution to reduce the number of visits and improve efficiency. This paper proposes a digital process for simultaneously implanting and preparing teeth. It integrates implant surgical guide and 3D-printed tooth preparation guide into a single guide and completes guided implant placement and precise tooth preparation. Based on "repair-oriented" virtual implant planning, the implant surgical guide can improve the efficiency and predictability of implant placement, and its linear accuracy is about 1 mm. The tooth preparation guide precisely guides tooth preparation and restoration space visualization, ensuring the quality of the tooth preparation. The two guides have different design accuracy requirements, and thus their combination improves the overall guiding accuracy requirements. The concurrent application of the two guides minimizes the clinical operation time, number of visits, and economic burden of patients.
Humans ; Surgery, Computer-Assisted ; Dental Implantation, Endosseous ; Printing, Three-Dimensional ; Technology ; Tooth Preparation ; Computer-Aided Design ; Dental Implants ; Imaging, Three-Dimensional ; Cone-Beam Computed Tomography

Implant treatment in the esthetic area requires stable osseointegration and successful esthetic outcomes. Achieving this goal requires careful consideration of accurate implant axis and ideal three-dimensional position. Owing to the high esthetics and the special anatomical structure of the maxillary, a successful implant means a synthesized deli-beration of the residual bone dimensions, soft-tissue thickness, and the relationship of the residual alveolar ridge with the planned restoration. This article offers an in-depth analysis of the clinical decisions and key factors affecting the implant direction in the esthetic area.
Dental Implantation, Endosseous/methods* ; Dental Implants ; Esthetics, Dental ; Alveolar Ridge Augmentation/methods* ; Osseointegration ; Maxilla/surgery* ; Dental Implants, Single-Tooth

Objective: To study the clinical outcomes and feasibility of immediate implantation after flap surgery and minimally invasive extraction in the maxillary molar area and to provide a reference for it. Methods: Forty-one patients (41 molars in total) with maxillary molars that could not be preserved, treated from June 2018 to June 2020 at the Department of Oral and Maxillofacial Surgery at the Affiliated Hospital of Qingdao University, were selected. There are 24 males and 17 females with the age of (49.7±1.8) years (range 18-66 years). Pre-operative cone-beam CT (CBCT) was taken for measurement and analysis. After flap surgery and minimally invasive tooth extraction, the inflammatory granulation tissues attached to the soft and hard tissues were completely scraped and clipped, followed by the preparation of the implants in the correct three-dimensional position. Torque value and implant stability quotient (ISQ) were recorded after implant placement and with non-submerged healing. CBCT examination was taken 6 months after surgery and ISQ value was checked before crown restoration. CBCT examination was also taken 1 year after the permanent restoration. The survival rate of 6 months after surgery, the success rate of 1 year after permanent restoration, and the size of jump gaps immediately after surgery, 6 months after surgery, 1 year after permanent restoration respectively, were performed. The ISQ values were compared immediately and 6 months after surgery. Results: A total of 41 implants were placed in 41 patients. Six months after surgery, the survival rate was 100% (41/41). Twelve months after permanent restoration, the success rate of the implant restoration was 100% (41/41). The torque value after implant implantation was (42.77±0.79) N·cm. The buccal and palatal jump gaps were (3.15±0.16) mm and (2.86±0.18) mm immediately after surgery, respectively. The mesial and distal jump gaps were (2.94±0.19) mm and (3.77±0.21) mm, respectively. CBCT showed that no jump gap around the implants at 6 months after surgery and 1 year after permanent restoration. The ISQ values at immediately and 6 months after surgery were (74.78±0.59) and (80.20±0.49) respectively, and the difference was statistically significant (t=-9.03, P<0.001). Conclusions: Immediate dental implantation in the correct three-dimensional position could achieve good osseointegration by means of flap surgery, minimally invasive extraction and thorough removal of inflammatory tissue on the surface of soft and hard tissues. The clinical outcomes were satisfactory.
Adolescent ; Adult ; Aged ; Dental Implantation, Endosseous/methods* ; Dental Implants ; Feasibility Studies ; Female ; Humans ; Immediate Dental Implant Loading ; Male ; Middle Aged ; Molar/surgery* ; Young Adult

Retrograde peri-implantitis (RPI), a kind of rare biological complication in implant-supported prosthetic rehabilitation, has been reported more frequently in recent years. RPI is defined as the periapical lesion that occurs following implant placement while the coronal part of the implant achieves normal osseointegration. Due to the possibilities of asymptomatic clinical scenarios, RPI can easily be ignored if routine radiographic examination is absent postoperatively, which may postpone treatment and affect long-term outcome. The common cause is infection originating from the periapical lesion of the neighboring teeth, the residual bacteria at the implant site, the contaminated implant apex and etc. Treatment methods rely on the infection source and severity of defect. This article discusses the diagnosis, classification, etiology, and pathology as well as prevention and treatment of RPI in order to provide evidence for clinical decisions in the future.
Dental Implantation, Endosseous ; Dental Implants/adverse effects* ; Humans ; Osseointegration ; Peri-Implantitis/prevention & control*

Recently, among the edentulous patients who undergo dental implants, the proportion of hypertensive patients remains high, which poses a greater challenge for clinicians to operate and to maintain the therapeutic effect. The present review comprehensively summarized clinical researches about the adverse effects on dental implants, outlined molecular mechanisms of the positive effects of various antihypertensive drugs on bone metabolism, and proposed that clinicians should select preventive strategies during preoperative and intraoperative procedures according to the blood pressure of patients with hypertension.
Alveolar Bone Loss ; Dental Implantation, Endosseous/methods* ; Dental Implants ; Dental Prosthesis, Implant-Supported ; Dental Restoration Failure ; Humans ; Hypertension/surgery* ; Jaw, Edentulous ; Maxilla/surgery* ; Risk Assessment