Fever is an increase in body temperature beyond the normal range, acting as a protective inflammatory mechanism. This article summarizes diseases with fever encountered in dental clinics, including what is known about pyrexia in coronavirus infection, and further proposes a "six steps in one" identification and analysis strategy to guide the clinical work of stomatology.
Humans ; Dental Clinics ; Fever/diagnosis* ; Coronavirus Infections

OBJECTIVES: To thoroughly understand the current dental chair equipment status of dental clinics in Sichuan Province and provide a reference for administrative departments. METHODS: Data were collected from a health administrative department and a regional social development yearbook. The number of existing dental clinics and dental chairs in Sichuan Province was investigated. RESULTS: In Sichuan Province, 7 103 dental clinics were determined to be equipped with 21 760 dental chairs. The Gini coefficients of per capita dental clinics in the province were 0.50, 0.22, and 0.06, and the Gini coefficients of per capita dental chairs were 0.68, 0.31, and 0.15; these coefficients had the same distribution as that reflected by the Lorenz curve. In consideration of geographic distribution, the Theil index for the distribution of dental clinics and dental chairs among cities and states were 0.690 7 and 0.822 3, respectively. The overall Theil index va-lues for the distribution of dental clinics and dental chairs in the province were 0.902 4 and 1.079 4, respectively. The difference in the distribution of dental clinics and dental chairs among cities and states in the province contributed 0.765 4 and 0.761 8 to the total difference, respectively. CONCLUSIONS The allocation of oral health resources in Sichuan Pro-vince is relatively equitable in terms of population and economic distribution but uneven in geographical distribution.
Dental Clinics ; Oral Health ; China

ABSTRACT Inappropriate antibiotic prescribing in dentistry has been widely reported but local studies are scarce. We aimed to evaluate antibiotic prescribing practices among dental officers in a public dental primary care clinic against current guidelines: specifically assessing the number, appropriateness, accuracy of prescriptions, type of antibiotics prescribed and repeated prescribing of the same type of antibiotics within a specific duration. A retrospective audit consisting of two cycles (1st cycle: July to September 2018, 2nd cycle: July to September 2019) was carried out by manually collecting relevant data of patients (aged 18 and above) who were prescribed antibiotics from carbon copies of prescription books. Between each cycle, various interventions such as education through a continuous professional development (CPD) session, presentation of preliminary findings and making guidelines more accessible to dental officers were implemented. When the 1st and 2nd cycles were compared, the number of antibiotic prescriptions issued reduced from 194 to 136 (–30.0%) whereas the percentage of appropriate prescriptions increased slightly by 4.1%. Inaccurate prescriptions in terms of dosage and duration decreased (–0.5% and –13.7%, respectively) whilst drug form and frequency of intake increased (+15.7% and +0.7%, respectively). Repeated prescribing of the same antibiotics by the same officer within a period of ≤6 weeks no longer occurred. Amoxicillin and metronidazole were most commonly prescribed in both cycles. Overall, the antibiotic prescribing practices did not closely adhere to current guidelines. However, clinical audit in conjunction with targeted interventions resulted in improvement in the antibiotic prescribing patterns. Thus, further intervention and re-audit is necessary.
Anti-Bacterial Agents--administration & ; dosage ; Dental Clinics ; Clinical Audit

ABSTRACT This study aims to evaluate the optimum duration of flushing dental unit waterlines (DUWLs) in Universiti Sains Islam Malaysia (USIM) dental polyclinics for removal of heterotrophic bacteria. Water samples were obtained from triple air syringes at each dental chair from oral surgery clinic, outpatient clinic and polyclinic 17 at Faculty of Dentistry, USIM after 16 and 64 hours of not operating the dental units as baseline samples. This is followed by sampling after continuous flushing at 30 seconds, 1 minute, 2 minutes and 3 minutes of flushing duration. The levels of heterotrophic plate count (HPC) for each flushing duration were determined by quantification of colony forming units (CFUs) after cultivation of samples on plate count agar (PCA), R2A agar and 5% sheep blood agar (SBA). Statistically, there was no significant reduction in CFUs of HPC for all flushing duration compared to baseline (P > 0.05) with the most notable HPC reducing level after 1 minute and 3 minutes of flushing DUWLs. However, HPC level at USIM dental clinics is still exceeding the recommendation by Centers for Disease Control and Prevention (CDC) which should be less than 500 CFU/mL. The existing method of controlling DUWLs contamination in USIM dental clinics is only by flushing DUWLs 1 minute every morning prior to dental treatment as recommended by Malaysian Dental Council (MDC) without the use of chemical germicides. Thus, the flushing method alone is not reliable to reduce the number of microorganisms in the DUWLs.
Dental Clinics ; Biofilms

In patients with fully edentulous jaw, treatment of complete dentures should be carried out in many stages when following the conventional methods. Therefore there were disadvantages such as multiple visits to dental clinic is inevitable. In addition, errors caused by polymerization shrinkage, which happens during the fabrication of denture, and difficulties in reproduction of damaged or lost denture were considered as disadvantages. But nowadays, computer-aided design and computer-aided manufacturing (CAD/CAM) system is widely used in dentistry and it has begun to expand its spectrum in manufacturing complete dentures. Using CAD/CAM system to fabricate complete dentures can reduce the number of patient's visit and clinical chair time, since taking impression, recording jaw relation, and selection of artificial teeth are performed at the same time during the first visit, and delivering of dentures during the second visit is possible. In addition, because 3D-Printing technology is used, errors by polymerization shrinkage can be reduced. Among the companies that fabricate complete dentures using CAD/CAM system, DENTCA CAD/CAM denture (DENTCA Inc., Los Angeles, CA, USA) is the most commercialized company. In this case, we treated patients of complete dentures using conventional complete denture method and DENTCA CAD/CAM denture system in the same patient. We would like to report this case because we have achieved good results not only in functional aspects of pronunciation, chewing, and swallowing but also in aesthetic aspects.
Computer-Aided Design ; Deglutition ; Dental Clinics ; Dentistry ; Denture, Complete ; Dentures ; Humans ; Jaw ; Jaw, Edentulous ; Mastication ; Methods ; Polymerization ; Polymers ; Reproduction ; Tooth, Artificial

PURPOSE: The aim of this study is to evaluate the effectiveness of MnO₂-diatom microbubbler (DM) on the surface of prosthetic materials as a mouthwash by comparing the biofilm removal effect with those previously used as a mouthwash in dental clinic.MATERIALS AND METHODS: DM was fabricated by doping manganese dioxide nanosheets to the diatom cylinder surface. Scanning electron microscopy (SEM) was used to observe the morphology of DM and to analyze the composition of doped MnO₂. Stereomicroscope was used to observe the reaction of DM in 3% hydrogen peroxide. Non-precious metal alloys, zirconia and resin specimens were prepared to evaluate the effect of biofilm removal on the surface of prosthetic materials. And then Streptococcus mutans and Porphyromonas gingivalis biofilms were formed on the specimens. When 3% hydrogen peroxide solution and DM were treated on the biofilms, the decontamination effect was compared with chlorhexidine gluconate and 3% hydrogen peroxide solution by crystal violet staining.RESULTS: Manganese dioxide was found on the surface of the diatom cylinder, and it was found to produce bubble of oxygen gas when added to 3% hydrogen peroxide. For all materials used in the experiments, biofilms of the DM-treated groups got effectively removed compared to the groups used with chlorhexidine gluconate or 3% hydrogen peroxide alone.CONCLUSION: MnO₂-diatom microbubbler can remove bacterial membranes on the surface of prosthetic materials more effectively than conventional mouthwashes.
Alloys ; Biofilms ; Chlorhexidine ; Decontamination ; Dental Clinics ; Dental Plaque ; Diatoms ; Gentian Violet ; Hydrogen Peroxide ; In Vitro Techniques ; Manganese ; Membranes ; Microscopy, Electron, Scanning ; Mouthwashes ; Oral Hygiene ; Oxygen ; Porphyromonas gingivalis ; Streptococcus mutans

PURPOSE: The aim of the current study was to analyze treatment concepts of a cohort of German dentists for planning, fabrication, and maintenance of implant-supported fixed and removable restorations.MATERIALS AND METHODS: A questionnaire including queries about experiences with implant-supported restorations as well as prosthetic and maintenance treatment concepts for supplying patients with fixed and removable implant-supported prosthetic restorations was developed and sent to 350 dental offices registered in the municipal area of Leipzig, Germany.RESULTS: An overall total of 62 returned questionnaires were included in the analyses, which relates to a response rate of 17.7%. Participating dentists were more involved in the prosthetic aspects of implant dentistry rather than surgery, while prosthetic concepts such as backward planning, digital processing, and application of all-ceramic materials were not commonly performed. Simple attachments were preferred over complex retention systems in removable implant-supported restorations. Tooth/implant-supported fixed denture prostheses as well as removable denture prostheses with supporting posterior implants were not regarded as a favorable treatment option.CONCLUSION: Within the limitations of the study, the data indicate that dentists favor simple and conventional treatment approaches in implant prosthetics. Prosthetic aspects in the planning of implant-supported restorations are often neglected. Prosthetic treatment guidelines and aspects should commonly be considered in the planning phase of implant-supported prosthetic restorations, and awareness should be increased in postgraduate education.
Cohort Studies ; Crowns ; Dental Implants ; Dental Offices ; Dentistry ; Dentists ; Dentures ; Education ; Germany ; Humans ; Peri-Implantitis ; Prostheses and Implants

BACKGROUND: We aimed to assess the dose needed to achieve the propofol effect-site concentration using target-controlled infusion in intellectually disabled patients and to detail the most effective method for achieving a safe level of consciousness without hemodynamic changes as well as detail any resulting adverse effects. METHODS: We performed a retrospective review of sedation service records of 138 intellectually disabled patients (51, mental retardation; 36, autism; 30, brain lesion, 12 genetic diseases, 9 dementia) aged over 15 years and weighing over 30 kg. These patients had received propofol via target-controlled infusion in the special care dental clinic of Seoul National University Dental Hospital from May 2008 to September 2018 for restorative treatment (112), minor surgery (13), prosthodontics (7), periodontics treatment (5), and implant (1). RESULTS: For all groups, the duration of dental treatments was 43 ± 18 minutes, total sedation time was 73 ± 23 minutes, and total BIS values was 57 ± 12. The propofol maintenance dosage values for each group were: mental retardation, 3 ± 0.5 (2–4) µg/ml; autism, 3.1 ± 0.7 (2–5) µg/ml; brain lesion, 2.8 ± 0.7 (1.5–5) µg/ml; genetic disease, 2.9 ± 0.9 (1–4) µg/ml; and dementia 2.3 ± 0.7 (1–3.4) µg/ml. CONCLUSIONS: The dementia group needed a lower dosage to reach a safe, effective propofol effect-site concentration than the other groups. Since there were no complications, deep sedation is a great alternative to general anesthesia for dental treatment of intellectually disabled patients.
Anesthesia, General ; Autistic Disorder ; Brain ; Consciousness ; Deep Sedation ; Dementia ; Dental Clinics ; Hemodynamics ; Humans ; Intellectual Disability ; Methods ; Minor Surgical Procedures ; Periodontics ; Propofol ; Prosthodontics ; Retrospective Studies ; Seoul

BACKGROUND: This study aimed to provide basic data to establish a foundation for efficient operation of the organization by assessing the effects of self-efficacy and job stress (measured by self-efficacy, job demand, and job autonomy) on organizational commitment among clinical dental hygienists. METHODS: This was a cross-sectional survey study that used a self-administered questionnaire to collect data. After institutional review board approval, a survey was conducted from January to May 2017, targeting dental hygienists working in dental clinics and hospitals. The final 199 questionnaires were analyzed with PASW 18.0 for Windows (IBM Corp.). The data were analyzed using mean and/or standard deviation t-test, one-way ANOVA, and multiple regression analysis. RESULTS: The means for self-efficacy, job demand, job autonomy, and organizational commitment were 55.94±9.65, 26.55±2.29, 20.24±3.88, and 49.49±8.39, respectively. Along with self-efficacy, the other factors of organizational commitment among dental hygienists that were statistically significant included job autonomy, mean salary (2,500~2,990 thousand Korean won [KRW] and ≥3,000 thousand KRW), and employee welfare (good), which are sub-areas of the surface acting. In other words, it was found that the higher the mean salary, the better the employee welfare, the higher self-efficacy, and the higher the organizational commitment, and the explanatory power of the model was approximately 42.1%. CONCLUSION: These results suggest that the higher the self-efficacy, job autonomy, mean salary, and employee welfare, the higher the organizational commitment. In order to improve job demand among dental hygienists, it is necessary to establish an effective plan to improve job welfare, self-efficacy, and job autonomy.
Cross-Sectional Studies ; Dental Clinics ; Dental Hygienists ; Ethics Committees, Research ; Humans ; Salaries and Fringe Benefits

BACKGROUND: This study aimed to investigate the effects of critical thinking and good communication skills on the problem-solving abilities of dental hygiene students. METHODS: A total of 508 dental hygiene students were convenience-sampled from 3 universities. RESULTS: The results revealed that critical thinking had the highest intellectual fairness score of 3.60, and systematicity was the lowest at 3.19. The values for communication skills were high in reaction, social adequacy, and concentration, with an average of 3.65. Problem-solving abilities were in the following order: clarification of the problem, seeking solutions, and decision making. According to general characteristics, more extroverted personalities possessed higher levels of critical thinking, communication skills, and problem-solving abilities (p<0.01). Critical thinking scores were high (p=0.016) in students who responded that peer relationship was difficult; however, their communication skills were the lowest (p<0.001). Additionally, problem-solving abilities were highest among students who reported a difficult peer relationship (p=0.001). The higher the satisfaction with dental hygiene academics, the higher the critical thinking, communication skill, and problem-solving ability (p<0.001). Critical thinking showed a high positive correlation with variables in the following order: clarification of the problem, performing the solutions, seeking solutions, decision making, and evaluation and reflection. The communication skills were also related to these variables listed above (p<0.01). With critical thinking, confidence, watchfulness, intellectual passion/curiosity, sound skepticism, objectivity, and systematicity all influenced the problem-solving ability. CONCLUSION: Communication skills were influenced by noise control, putting on the other's shoe, social tensions, and efficiency, which affected the problem-solving ability. Dental clinics require dental hygienists to have critical thinking to make analytical judgments and effective communication skills to solve human relation problems with patients and care-givers. Therefore, these skills should be developed in dental hygiene students to improve their problem-solving abilities.
Decision Making ; Dental Clinics ; Dental Hygienists ; Humans ; Judgment ; Noise ; Oral Hygiene ; Shoes ; Thinking