OBJECTIVES: Through the investigation of the microhardness and microstructure of permanent tooth enamel at various eruption stages during childhood, this research offers references for the early prevention of childhood dental caries. METHODS: Forty-five premolars extracted due to orthodontic reasons were collected and screened. These premolars were divided into three experimental groups according to the time since eruption: Group A (erupted for 0-1 year), Group B (erupted for 1-3 years), and Group C (erupted for 3-5 years). Additionally, the third molars that were extracted due to impaction and had not erupted were selected as the control group, with 15 teeth in each group. Samples were prepared, and the surface microhardness, microstructure, and elemental composition of the enamel were measured using Vickers microhardness tester, scanning electron microscope, and electron probe, respectively. RESULTS: Compared with that in the control group, the microhardness of enamel in groups A, B, and C increased with prolonged eruption time, the surface porosity structure decreased considerably, the contents of Na and Mg on the surface decreased, and that of F increased (P<0.05). CONCLUSIONS The microhardness and microstructure of enamel in permanent teeth at different stages vary. Permanent teeth are at a substantially higher risk of caries within one year after eruption, and early prevention should be emphasized.
Dental Enamel/ultrastructure* ; Humans ; Hardness ; Dental Caries/prevention & control* ; Microscopy, Electron, Scanning ; Tooth Eruption ; Bicuspid/chemistry* ; Dentition, Permanent ; Child ; Child, Preschool

OBJECTIVETo evaluate the effect of base layer thickness of DyadFlow(DF) self-adhesive resin on dentin bonding strength.

METHODSTwenty extracted intact human molars were randomly selected and the occlusal surface of each molar was prepared by removing the enamel and exposing the dentin surface. The prepared molars were divided, randomly and equally, into 4 groups. For groups G0.5, G1.0 and G2.0, DF was applied directly on the dentin surfaces following the manufacturer's instruction, and for group GOB, OptiBond All-in-One(OB) self etching adhesive was applied on the dentin surface before using DF. The base layer thickness of DF was 0.5 mm, 1.0 mm, 2.0 mm, 2.0 mm for groups G0.5, G1.0, G2.0 and GOB, respectively. Composite crown were built up on each tooth, then the samples were sectioned longitudinally into sticks with proximately 1.0 mm2 bonding area(for microtensile bond strength[MTBS] testing) or slabs (for bonding interface observation with SEM). Fifteen sticks were obtained for each group. The fracture surface was also observed using SEM and the fracture type of each specimen was determined.

RESULTSThe MTBS were: GOB (20.19±3.11) MPa>G0.5 (8.65±1.58) MPa>G1.0 (6.65±1.13) MPa>G2.0 (5.70±0.60) MPa(P<0.05). Bonding interface fracture B2 was most frequently observed for all groups: G0.5: 14/15, G1.0: 13/15, G2.0: 14/15 and GOB: 13/15.

CONCLUSIONSThe MTBS decreased when the base layer thickness of DF increased. Direct application of DF self-adhesive resin on dentin surface adhesive restorations should be concerned.

Adhesives ; chemistry ; Crowns ; Dental Bonding ; Dental Enamel ; Dentin ; chemistry ; Dentin-Bonding Agents ; chemistry ; Humans ; Molar ; Resin Cements ; chemistry ; Tensile Strength

We present the binding ability of a new peptide (CMPQVMPMC-) with dental enamel after being evaluated in the present study. Under a standard procedure, the recovery of M13 filamentous phage was greatly enhanced by displaying the peptide in phage coat protein p III. Then the cyclic peptide was synthesized using a solid method. The effect of the cyclic peptide in vitro biomineralization was tested in a single-diffusion microtiter plate gel system. Absorbance at 405 nm of each sample was recorded for 24 h at every 6 h intervals. The relatively increased values of each sample were expressed as percentages relative to the blank group (100%). The cyclic peptide resulted in a concentration-dependent delayed nucleation. In addition, the overall values of peptide groups at the end of 24 h were lower than those in the control group but much higher than those in the BSA control group.
Dental Enamel ; chemistry ; Peptides ; chemical synthesis ; chemistry ; Protein Binding ; Tooth Calcification

The objective of this systematic review was to assess tooth wear against ceramic crowns in posterior region in vitro and in vivo. An electronic PubMed search was conducted to identify studies on tooth wear against ceramic crowns in posterior region. The selected studies were analyzed in regard to type of crowns, natural antagonist, measuring protocol and outcome. From a yield of 1 000 titles, 43 articles were selected for full-text analysis; finally, no in vitro and only five in vivo studies met the inclusion criteria. As there is heterogeneity in design, used measuring method, ceramics and analysis-form, a meta-analysis was not possible. Results of these studies are very controversial which makes a scientifically valid comparison impossible. This review indicated that some all-ceramic crowns are as wear friendly as metal-ceramic crowns. Up to now, it has been impossible to associate tooth wear with any specific causal agent. The role of ceramic surface treatment that might be responsible for the changing in rate of tooth wear seems undetermined as yet through clinical trials. The literature reveals that studies on this topic are subject to a substantial amount of bias. Therefore, additional clinical studies, properly designed to diminish bias, are warranted.
Crowns ; Dental Enamel ; pathology ; Dental Porcelain ; chemistry ; classification ; Humans ; Metal Ceramic Alloys ; chemistry ; Surface Properties ; Tooth Crown ; pathology ; Tooth Wear ; etiology

Tooth bleaching agents may weaken the tooth structure. Therefore, it is important to minimize any risks of tooth hard tissue damage caused by bleaching agents. The aim of this study was to evaluate the effects of applying 45S5 bioglass (BG) before, after, and during 35% hydrogen peroxide (HP) bleaching on whitening efficacy, physicochemical properties and microstructures of bovine enamel. Seventy-two bovine enamel blocks were prepared and randomly divided into six groups: distilled deionized water (DDW), BG, HP, BG before HP, BG after HP and BG during HP. Colorimetric and microhardness tests were performed before and after the treatment procedure. Representative specimens from each group were selected for morphology investigation after the final tests. A significant color change was observed in group HP, BG before HP, BG after HP and BG during HP. The microhardness loss was in the following order: group HP>BG before HP, BG after HP>BG during HP>DDW, BG. The most obvious morphological alteration of was observed on enamel surfaces in group HP, and a slight morphological alteration was also detected in group BG before HP and BG after HP. Our findings suggest that the combination use of BG and HP could not impede the tooth whitening efficacy. Using BG during HP brought better protective effect than pre/post-bleaching use of BG, as it could more effectively reduce the mineral loss as well as retain the surface integrity of enamel. BG may serve as a promising biomimetic adjunct for bleaching therapy to prevent/restore the enamel damage induced by bleaching agents.
Animals ; Biomimetic Materials ; analysis ; therapeutic use ; Cattle ; Ceramics ; analysis ; chemistry ; Chemical Phenomena ; Color ; Colorimetry ; Dental Enamel ; drug effects ; ultrastructure ; Electron Probe Microanalysis ; Glass ; analysis ; chemistry ; Hardness ; Hydrogen Peroxide ; pharmacology ; Hydrogen-Ion Concentration ; Microscopy, Electron, Scanning ; Protective Agents ; analysis ; therapeutic use ; Random Allocation ; Solubility ; Spectroscopy, Fourier Transform Infrared ; Time Factors ; Tooth Bleaching ; methods ; Tooth Bleaching Agents ; pharmacology ; Water ; chemistry ; X-Ray Diffraction

Microbeam X-ray fluorescence (micro-XRF) spectrometry has been raised as an analytical technique of microbeam during the recent years. With its advantages of high sensitivity, small sample requirement, high testing accuracy and non-destruction, the technique is widely utilized in forensic science. This review bases on recent researches at home and abroad, describes its applications including identification of gunshot residue, visualization of fingerprints, discrimination of drug source, production process, and other material evidences of analysis in crime scene. Thanks to the advances in technology, intelligent and portable micro-XRF equipment has appeared to be applied. It is believed that it may be more popular and frequent in administration of forensic science in the near future.
Bone and Bones/chemistry* ; Crime ; Dental Enamel/chemistry* ; Dermatoglyphics ; Drowning/diagnosis* ; Forensic Medicine/methods* ; Humans ; Limit of Detection ; Spectrometry, X-Ray Emission/methods* ; Zinc/analysis*

OBJECTIVETo compare the penetration abilities of resin infiltration into proximal lesions in primary molars with those of adhesive in vitro.

METHODSThirty-two extracted or exfoliated primary molars showing proximal white spot lesions were selected. Roots of the teeth were removed, and the crowns were cut across the white spot lesions perpendicular to the surface. Cut surfaces were examined (by stereo microscopy) and classified with respect to histological lesion extension (C1-C4): lesions confined to the outer half on enamel (C1), lesions confined to the inner half on enamel (C2), lesions confined to the outer half on dentin (C3), lesions extending into the inner half of dentin (C4). Corresponding lesion halves were etched for 120 s with 15% hydrochloric acid gel and were subsequently treated with either adhesive or resin infiltration. Specimens were observed with laser scanning confocal microscope (LSCM) in dual fluorescence mode. In confocal microscopic images, lesion depth and penetration depth of the resin infiltration or the adhesive in corresponding halves were measured, and penetration percentages were calculated respectively. Differences of the data between two groups were analyzed by Wilcoxon signed rank test. Variations of histological caries extensions were detected with Kruskal-Wallis H test.

RESULTSAt the same grading level (C1-C3) in histological caries extension, penetration depths of the resin infiltration group and the adhesive group were 240 (230, 260) µm vs 190 (150, 210) µm, 405 (300, 523) µm vs 180 (160, 200) µm, and 590 (430, 640) µm vs 180 (160, 200) µm respectively. There was significant statistical difference in the data between two groups (P < 0.05). Statistically significant difference in penetration depths of the resin infiltration group (at C1-C3) were found (P < 0.01). At the same grading level (C1-C3) in histological caries extension, percentage penetrations of the resin infiltration group and the adhesive group were [100.0% (96.2%, 100.0%)], [99.1% (95.7%, 100.0%)], [82.0% (81.1%, 92.2%)] and [79.2% (68.4%, 87.5%)], [41.8% (29.1%, 74.5%)], [30.2% (29.2%, 39.6%)], respectively. The difference between the above data was also significant (P < 0.05). Percentage penetrations of the resin infiltration group at C1 and C2 level was higher than those at C3 level (P < 0.05).

CONCLUSIONSThe resin infiltration is capable of penetrating almost completely into proximal lesions in primary molars.

Acid Etching, Dental ; methods ; Composite Resins ; chemistry ; Dental Caries ; pathology ; therapy ; Dental Cements ; chemistry ; Dental Enamel ; pathology ; Dental Enamel Permeability ; Humans ; Hydrochloric Acid ; pharmacology ; Molar ; pathology ; Surface Properties ; Tooth, Deciduous ; pathology

Enamel crystals are unique in shape, orientation and organization. They are hundreds of thousands times longer than they are wide, run parallel to each other, are oriented with respect to the ameloblast membrane at the mineralization front and are organized into rod or interrod enamel. The classical theory of amelogenesis postulates that extracellular matrix proteins shape crystallites by specifically inhibiting ion deposition on the crystal sides, orient them by binding multiple crystallites and establish higher levels of crystal organization. Elements of the classical theory are supported in principle by in vitro studies; however, the classical theory does not explain how enamel forms in vivo. In this review, we describe how amelogenesis is highly integrated with ameloblast cell activities and how the shape, orientation and organization of enamel mineral ribbons are established by a mineralization front apparatus along the secretory surface of the ameloblast cell membrane.
Ameloblasts ; chemistry ; cytology ; Amelogenesis ; physiology ; Basement Membrane ; chemistry ; Crystallization ; Dental Enamel ; chemistry ; Dental Enamel Proteins ; secretion ; Humans ; Tooth Calcification

To determine the chemical composition of Galla chinensis extract (GCE) by several analysis techniques and to compare the efficacy of GCE and its main component(s) in inhibition of enamel demineralization, for the development of future anticaries agents, main organic composition of GCE was qualitatively determined by liquid chromatography-time of flight-mass spectrometry (LC-TOF-MS) and quantified by high-performance liquid chromatography-diode array detector (HPLC-DAD). Inorganic ions were tested by inductively coupled plasma-atomic emission spectroscopy and F was especially measured by ion chromatography. Then, bovine enamel blocks were randomly divided into four treatment groups and were subjected to a pH-cycling regime for 12 times. Each cycle included 5-min applications with one of four treatments: 4 g⋅L(-1) GCE solution, 4 g⋅L(-1) gallic acid (GA) solution, 1 g⋅L(-1) NaF solution (positive control), deionized water (DDW, negative control), and then 60-min application in pH 5.0 acidic buffer and 5-min application in neutral buffer. Acidic buffers were retained for calcium analysis. The main organic composition of GCE were GA and its isomer, and, to a lesser extent, small molecule gallotannins. The content of GA in GCE was 71.3%±0.2% (w/w). Inorganic ions were present in various amounts, of which Ca was (136±2.82) µg⋅g(-1), and Zn was (6.8±0.1) µg⋅g(-1). No F was detected in GCE. In pH cycling, GA showed an effect similar to GCE in inhibiting enamel demineralization (P>0.05). GA was found to be the main effective, demineralization inhibiting component of GCE and could be a promising agent for the development of anticaries agents.
Animals ; Calcium ; analysis ; Cariostatic Agents ; therapeutic use ; Cattle ; Chromatography, High Pressure Liquid ; Chromatography, Liquid ; Dental Enamel ; Drugs, Chinese Herbal ; chemistry ; therapeutic use ; Gallic Acid ; analysis ; therapeutic use ; Hydrolyzable Tannins ; analysis ; Mass Spectrometry ; Polyphenols ; analysis ; Random Allocation ; Tooth Demineralization ; prevention & control

BACKGROUNDEnamel decalcification in orthodontics is a concern for dentists and methods to remineralize these lesions are the focus of intense research. The aim of this study was to evaluate the remineralizing effect of casein phosphopeptide amorphous calcium phosphate (CPP-ACP) nanocomplexes on enamel decalcification in orthodontics.

METHODSTwenty orthodontic patients with decalcified enamel lesions during fixed orthodontic therapy were recruited to this study as test group and twenty orthodontic patients with the similar condition as control group. GC Tooth Mousse, the main component of which is CPP-ACP, was used by each patient of test group every night after tooth-brushing for six months. For control group, each patient was asked to brush teeth with toothpaste containing 1100 parts per million (ppm) of fluoride twice a day. Standardized intraoral images were taken for all patients and the extent of enamel decalcification was evaluated before and after treatment over this study period. Measurements were statistically compared by t test.

RESULTSAfter using CPP-ACP for six months, the enamel decalcification index (EDI) of all patients had decreased; the mean EDI before using CPP-ACP was 0.191 ± 0.025 and that after using CPP-ACP was 0.183 ± 0.023, the difference was significant (t = 5.169, P < 0.01). For control group, the mean EDI before treatment was 0.188 ± 0.037 and that after treatment was 0.187 ± 0.046, the difference was not significant (t = 1.711, P > 0.05).

CONCLUSIONCPP-ACP can effectively improve the demineralized enamel lesions during orthodontic treatment, so it has some remineralization potential for enamel decalcification in orthodontics.

Adolescent ; Caseins ; chemistry ; therapeutic use ; Dental Enamel ; drug effects ; Female ; Humans ; Male ; Orthodontics ; methods