Taking the theory of zang-qiao （脏窍， viscera and orifices） as the framework， this paper elaborates on the connotation and expression of the holistic concept of zang-qiao. It expounds the concept from two dimensions， which are "integration of viscera and orifices" and "integration of the seven orifices"， and explains the diagnostic and therapeutic approach characterized by "inferring the condition of the viscera through the orifices and conducting comprehensive diagnosis" in the context of ear， nose， pharynx and larynx diseases. Moreover， it explores specific therapeutic strategies for orifice-related diseases in otorhinolaryngology， including treatment of the orifices via viscera， simultaneous treatment of viscera and orifices， and external therapies targeting the orifices， which provides a multidimensional thinking model and practical path for clinical diagnosis and treatment.

ObjectiveTo investigate the therapeutic effects of direct-acting antiviral agents (DAAs) combined regimens for hepatitis C virus (HCV) patients in Dehong Prefecture, Yunnan Province from 2022 to 2024, to analyze the characteristics of treatment failure patients, so as to provide a basis for discovering more effective treatment regimens in the future. MethodsData on HCV prevention and treatment in Dehong Prefecture was extracted from the China Disease Control and Prevention Information System. A total of 617 patients with HCV antiviral therapy were included, and the differences in variable characteristics among patients with different genotypes were analyzed using comparative statistical tests, including basic socio-demographic characteristics, biochemical testing indicators, and information on previous treatment and current treatment. In addition, the cure rate of HCV patients with diverse characteristics was compared, and the potential causes of treatment failure were explored simultaneously. ResultsThe cure rate of HCV was 96.8%, and statistically significant differences were observed in aspartate transaminase (AST) and alanine transaminase (ALT) levels, previous antiviral therapy history and initial treatment regimens among patients with different HCV genotypes (all P<0.05). Among the multi-type combination regimens, the cure rate of sofosbuvir (SOF)-containing regimens was 97.00%, that of velpatasvir (VEL)-containing regimens was 95.45%, and the cure rate of other treatment regimens, including the regimens with ribavirin (RIB) intervention, was 93.10%. Among the patients with treatment failure, 45.00% had genotype 3, 40.00% had abnormal abdominal ultrasound results, and all presented with elevated baseline AST test levels. ConclusionThe clinical treatment of HCV patients should consider the differences in genotype and biochemical test results. DAAs combined regimens for HCV have achieved a high cure rate in Dehong Prefecture and are applicable to HCV patients with diverse clinical characteristics, providing research evidence for wider application.

OBJECTIVE: This study aimed to investigate the prevalence of HIV pretreatment drug resistance (PDR) and the transmission clusters associated with PDR-related mutations in newly diagnosed, treatment-naive patients between 2020 and 2023 in Dehong prefecture, Yunnan province, China. METHODS: Demographic information and plasma samples were collected from study participants. PDR was assessed using the Stanford HIV Drug Resistance Database. The Tamura-Nei 93 model within HIV-TRACE was employed to compute pairwise matches with a genetic distance of 0.015 substitutions per site. RESULTS: Among 948 treatment-naive individuals with eligible sequences, 36 HIV subtypes were identified, with unique recombinant forms (URFs) being the most prevalent (18.8%, 178/948). The overall prevalence of PDR was 12.4% (118/948), and resistance to non-nucleotide reverse transcriptase inhibitors (NNRTIs), nucleotide reverse transcriptase inhibitors (NRTIs), and protease inhibitors (PIs) was 10.7%, 1.3%, and 1.6%, respectively. A total of 91 clusters were identified, among which eight showed evidence of PDR strain transmission. The largest PDR-associated cluster consisted of six CRF01_AE drug-resistant strains carrying K103N and V179T mutations; five of these individuals had initial CD4+ cell counts < 200 cells/μL. CONCLUSION The distribution of HIV subtypes in Dehong is diverse and complex. PDR was moderately prevalent (12.4%) between 2020 and 2023. Evidence of transmission of CRF01_AE strains carrying K103N and V179T mutations was found. Routine surveillance of PDR and the strengthening of control measures are essential to limit the spread of drug-resistance HIV strains.
Humans ; HIV Infections/virology* ; China/epidemiology* ; Drug Resistance, Viral ; Male ; Adult ; Female ; Middle Aged ; HIV-1/genetics* ; Anti-HIV Agents/therapeutic use* ; Myanmar/epidemiology* ; Young Adult ; Prevalence ; Adolescent ; Mutation

BACKGROUND:Bone mineral density is the clinical gold standard for determining bone strength,but bone mineral density is less sensitive to changes in bone mass,with large changes in bone mineral density only occurring when bone mass is significantly reduced,so bone mineral density has limited ability to predict changes in bone strength and fracture risk. OBJECTIVE:A model of the normal and osteoporotic hip joint was developed to analyze the stresses and deformation in the hip of normal and osteoporotic patients under single-leg standing conditions. METHODS:A healthy adult female volunteer at the age of 36 years was selected as the study subject.The CT data of the hip joint of this volunteer were obtained and saved in DICOM format.The hip joint model was reconstructed in three dimensions,and the material properties were assigned by the gray value assignment method to obtain the normal and osteoporotic hip joint models according to the empirical formula.The same boundary conditions and loads were set to simulate the stresses and deformation in the normal and osteoporotic hip joints in the single-leg standing position. RESULTS AND CONCLUSION:(1)In the finite element model of the normal and osteoporotic hip,the stress distribution was more concentrated in the medial region of the femoral neck.(2)In the hip bone,the stress distribution was mainly concentrated in the upper part of the acetabulum.(3)The stress peaks in the medial femoral neck and upper acetabulum were larger in the normal hip model than in the osteoporotic hip model,probably due to the reduced bone strength of the osteoporotic bone.(4)The peak Von Mises of both normal and osteoporotic hip models were concentrated on the medial femoral neck,and the peak Von Mises of the hip bone was smaller,indicating that the overall effect of osteoporosis on hip bone stresses was relatively small.(5)In terms of deformation in the single-leg standing position,the maximum deformation in the normal hip model was located at the acetabulum and femoral head,and the maximum deformation was located at the upper part of the greater trochanter of the femur.(6)It is suggested that the finite element analysis method to model the values of parameters related to bone tissue in osteoporosis may improve clinical prediction of bone strength changes and fracture risk.It is explained from the biomechanical view that the intertrochanteric femur and femoral neck are good sites for osteoporotic hip fractures.

Objective:To investigate the effect of 3D-printed customized flanged cup in hip revision with severe acetabular bone defects.Methods:Since February 2017, 10 cases of 3D-printed customized flanged cups were used in hip revision with severe acetabular bone defects, including 2 cases of Paprosky type IIIA and 8 cases of Paprosky type IIIB. There were 5 males and 5 females, mean age 73.6±8.1 yrs (range, 62-87 yrs), 5 left and 5 right cases. The preoperative thin-layer CT scan was preformed to reverse reconstruct digital pelvis. Five cases of one-piece flanged cups and 5 cases of decomposed flanged cups, including 3 cases of composite one-piece cups were designed by computer. The surgery was performed strictly according to the plan.Postoperative follow-up was performed to evaluate the Harris score. Operation time,intraoperative bleeding and other complications such as vascular and nerve injury, postoperative infection, and dislocation were counted. Pelvic X-ray was used to assess the height and horizontal position of the center of rotation and the stability of the prosthesis.Results:The surgical procedure was successful, with an average operative time of 147.9±48.3 min (range, 96-212 min) and an average intraoperative bleeding of 730.4±262.6 ml (range, 500-1 300 ml). The mean time of final follow-up was 40.8±18.7 months (range, 16-70 months) after surgery. At the last follow-up, the average Harris score was 83.80±6.73, with 4 cases excellent, 5 cases good, and 1 case fair. The excellent and good rate was 90%. The last Harris score was significantly higher than that before operation 28.60±8.40 ( t=16.84, P<0.001). The height of affected hip joint rotation center decreased from 46.24±7.74 mm before operation to 15.54±2.54 mm after operation with significant difference ( t=14.61, P<0.001). It was slightly higher than the opposite side (13.81±1.48 mm), which had no significant difference ( t=1.83, P=0.100). The horizontal distance of affected hip joint rotation center increased from 33.79±5.27 mm before operation to 40.53±4.50 mm after operation with significant difference ( t=3.62, P=0.006). It had no significant difference ( t=1.28, P=0.232) compared with the opposite side (38.54±3.46 mm). All incisions were healed in one stage without infection, vascular or nerve injury. During the following-up, all prostheses were in satisfied position without loosening, dislocation or screw breaks. Conclusion:Digitally assisted 3D-printed flanged cups can be used in hip revision with severe acetabular bone defect. It can not only improve hip joint function, but also restore the acetabular rotation center and the prosthesis stability, which can achieve good early and mid-term effect.

Objective:To analyze the efficacy of the reconstruction of the proximal humerus by reverse shoulder arthroplasty with three-dimensional (3D) printing technology after tumor rescetion.Methods:A retrospective analysis was conducted on the data of eight patients undergoing semi-constrained reverse shoulder arthroplasty with 3D printing technology after the resection of bone tumors in proximal humeri at the Affiliated Wuxi People's Hospital of Nanjing Medical University from December 2017 to January 2021. There were four males and four females with an average age of 55.1 (range, 31-73) years, all of whom had unilateral onset, 2 on the left and 6 on the right. There was one case of leiomyosarcoma (Enneking IIB), two cases of chondrosarcomas (one Enneking IA and one Enneking IB), four cases of Campanacci grade 3 giant cell tumor of bone, and one case of bone metastasis of lung adenocarcinoma. Individualized prosthesis and implantation protocol were completed preoperatively in all patients. The glenoid baseplate was manufactured using 3D printing technology. During the surgery, Malawer type I tumor resection and semi-constrained reverse shoulder arthroplasty were performed, with 6 cases simultaneously using allograft-prosthetic composite reconstruction. The follow-up was scheduled, and the patient received X-ray examination of the shoulder. The range of motion of the shoulder was measured, the Constant-Murley score and musculoskeletal tumor society (MSTS) score were recorded.Results:All 8 patients successfully completed the surgery, with a surgical time of 173.8±46.7 min (range, 130-260 min), intraoperative blood loss of 487.5±334.6 ml (range 200-1,200 ml), and proximal humeral resection of 9.9±4.6 cm (range, 4.5-19.0 cm). All patients were followed up for a period of 45.6±12.5 months (range, 24-60 months). At the last follow-up, the abduction ranges of motion of the affected shoulders increased from 27.5°±14.4° pre-operatively to 106.3°±21.8° post-operatively, with a statistically significant difference ( t=11.37, P<0.001). The forward flexion ranges increased from 28.1°±12.8° pre-operatively to 115.6°±24.0° post-operatively, with a statistically significant difference ( t=11.49, P<0.001). The Constant-Murley score was improved from 40.5±14.3 pre-operatively to 79.3±11.2 post-operatively, with a statistically significant difference ( t=9.58, P<0.001). The MSTS score was 25.6±2.2 (range, 23-28), including 6 excellent cases and 2 good cases. At 2 weeks after surgery, one patient experienced joint dislocation that was successfully reduced manually. Up to the final follow-up, all patients had survived without local tumor recurrence, metastasis, prosthesis infection and loosening. Conclusion:3D printing technology assisted shoulder arthroplasty is helpful for effective reconstruction and shoulder joint function recovery after resection of proximal humeral tumors, with satisfactory outcomes in the early and middle stages.

With the increasing incidence of hepatobiliary diseases, it is particularly important to understand the role of molecular, cellular and physiological factors in the clinical diagnosis and treatment with traditional Chinese medicine(TCM) in the development of liver disease. Appropriate animal models can help us identify the possible mechanisms of relevant diseases. Danio rerio(zebrafish) model was traditionally used to study embryonic development, and has been gradually used in screening and evaluation of liver diseases and relevant drug in recent years. Zebrafish embryos develop rapidly and the digestive organs of 5-day-old juvenile fish are all mature. At this stage, they may develop hepatobiliary diseases induced by developmental defects or compounds. Zebrafish liver is similar to human liver in cell composition, function, signal transduction, response to injury and cell process mediating liver disease. Furthermore, due to the high conservation of genes and proteins between humans and zebrafish, zebrafish becomes an alternative system for studying basic mechanisms of liver disease. Therefore, genetic screening could be performed to identify new genes involving specific disease processes, and chemical screening could be made for drugs in specific processes. This paper briefly introduced the experimental properties of zebrafish as model system, emphasized the study progress of zebrafish models for pathological mechanism of liver diseases, especially fatty liver, and drug screening and evaluation, so as to provide ideas and techniques for the future liver toxicity assessment of TCM.
Animals ; Drug Evaluation, Preclinical ; Humans ; Liver ; Liver Diseases/genetics* ; Medicine, Chinese Traditional ; Zebrafish/genetics*

Objective:To investigate the advantages and disadvantages of percutaneous compression plate (PCCP) for femoral neck fractures in the elderly patients.Methods:A retrospective study was conducted of the 31 elderly patients with femoral neck fracture who had been treated with PCCP from January 2012 to December 2018 at Orthopaedic Department, The First People's Hospital of Yancheng, Orthopaedic Department, The Ninth People's Hospital of Wuxi and Department of Orthopaedics, The People's Hospital of Wuxi. They were 16 men and 15 women, aged from 65 to 80 years (average, 70.5 years). By the Garden classification, 7 cases were type Ⅱ, 15 cases type Ⅲ and 9 cases type Ⅳ; by the Singh index, 4 cases were level Ⅲ, 11 cases level Ⅳ, 10 cases level Ⅴ and 6 cases level Ⅵ. The time from injury to operation ranged from 3 to 14 days (average, 5.8 days). The operation time, intraoperative blood loss, fracture reduction, fracture union time, complications and functional recovery of the hip were observed.Results:The operation time averaged 73.4 min and intraoperative blood loss 116.4 mL. At one week after operation, the Garden alignment index was level Ⅰ in 25 cases and level Ⅱ in 6. Superficial incision infection was noted in one case intraoperatively. Follow-ups for the 31 patients ranged from 12 to 47 months (mean, 18.9 months). All the fractures united after 4.9 months on average (from 4 to 8 months). Delayed union occurred in 2 cases, neck shortening in 12 cases, and avascular necrosis of femoral head in 3 displaced subcranial fractures 2 of which were high shear ones. The necrosis of femoral head was treated by arthroplasty in 2 and by conservative treatment in one. The Harris hip scores at the last follow-up for the 31 patients averaged 90.9 (from 75 to 100), giving 15 excellent, 12 good and 4 fair cases and an excellent to good rate of 87.1% (27/31).Conclusions:In treatment of femoral neck fractures in the elderly patients, PCCP has advantages of allowing early weight-bearing after operation, a high rate of fracture union, limited complications and quick and fine functional recovery of the hip. However, it should be used with caution in patients with severe osteoporosis, displaced subcranial or high shear fracture.

Objective:To explore the application of a 3D printed patient-specific guider (3D-PSG) in complex total knee arthroplasty (TKA).Methods:A retrospective analysis was performed of the data of 44 patients who had received complex artificial TKA for articular and extra-articular deformities of the knee from January 2016 to October 2019 at Department of Orthopaedic Surgery, Nanjing First Hospital. According to whether a 3D-PSG had been applied, the patients were divided into 2 groups. In the 3D-PSG group of 23 patients, there were 11 males and 12 females, with an age of 63.7 years ± 10.2 years (from 53 to 81 years); in the conventional group of 21 cases, there were 10 males and 11 females, with an age of 64.2 years ±12.1 years (from 51 to 79 years). In the 3D-PSG group, the preoperative CT data were 3D reconstructed for measurement of a full lower limb and design of a 3D-PSG and TKA was assisted by a 3D-PSG which had been manufactured by a 3D printer using the STL files of the 3D-PSG imported. In the conventional group TKA was performed in a standard manner. In the 3D-PSG group, the TKA surgical parameters in the preoperative plan were compared with actual surgical measurements. The 2 groups were compared in terms of operation time, intraoperative blood loss, postoperative drainage volume, length of hospital stay, visual analogue scale (VAS), Knee Society Score (KSS), hip knee ankle (HKA), frontal femoral component (FFC), frontal tibial component (FTC), lateral femoral flexion (LFF) and lateral tibial component (LTC).Results:There were no significant differences between the 2 groups in the preoperative general data, showing comparability ( P>0.05). In the 3D-PSG group, no significant differences were found between preoperative parameters designed and actual intraoperative measurements in the prosthetic type of femoral condyle (3.4±1.1 versus 3.5±0.9) or of tibial plateau (3.1±0.9 versus 3.3±1.2), or in the filler thickness (10.6 mm ± 3.2 mm versus 10.9 mm ± 4.7 mm) ( P>0.05). The 44 patients were followed up for an average of 10.8 months (from 7 to 13 months). The 3D-PSG group had significantly less operation time (65.7 min ± 10.5 min), intraoperative blood loss (19.8 mL ±7.3 mL), postoperative drainage volume (124.6 mL ± 27.9 mL) and hospital stay (7.3 d ± 2.5 d) than the conventional group (82.4 min ± 11.7 min, 86.5 mL ± 35.7 mL, 154.6 mL ± 21.3 mL and 10.6 d ± 3.1 d) ( P<0.05). The VAS and KSS scores at postoperative day 1, week 1 and week 2 in the 3D-PSG group were significantly better than those in the conventional group ( P<0.05). Significantly more patients in the 3D-PSG group achieved approximately ideal values in HKA, FFC, FTC, LFF and LTC than those in the conventional group ( P<0.05). Conclusion:A 3D printed patient-specific guider may improve surgical accuracy, reduce operation time and achieve better surgical outcomes in complex total knee arthroplasty.

Objective To compare the effects of bone transport versus induced membrane technique for large segmental tibial defects.Methods The clinical data were analyzed retrospectively of 89 patients with large segmental tibial defect who had been treated at Department of Orthopaedics,Wuxi No.9 People's Hospital from June 2005 to February 2017 using bone transport or induced membrane technique.They were 58males and 31 females,aged from 13 to 74 years (average,38.0 years).The bone transport group had 59cases and the induced membrane technique group 30 cases.The 2 groups were compared in terms of preoperative general data and postoperative bone nonunion,bone healing time,complications and functional recovery of the adjacent joint.Results There were no statistically significant differences between the 2groups in terms of age,gender,cause or type of defects,associated injury,course of disease,functionary scores of the adjacent joint or number of operations,showing compatibility between the 2 groups (P ＞ 0.05).All the patients were followed up for 12 to 48 months (average,20 months).The bone transport group had significandy longer clinical healing time (14.7 ± 5.4 months) and significantly higher incidences of major complications (50.8％),minor complications (57.6％) and overall complications (83.1％) than the induced membrane technique group (11.2 ± 2.8 months,16.7％,26.7％ and 30.0％,respectively) (P ＜ O.05),but significantly lower functionary scores of the adjacent joint (86.4 ± 5.0 points) than the induced membrane technique group (88.8 ± 4.9 points) (P ＜ 0.05).Conclusions Both bone transport and induced membrane technique are effective repairs for large segmental tibial defects.However,induced membrane technique may be superior to bone transport in terms of bone healing,complications and functional recovery.