OBJECTIVE: To evaluate the effects of posterior cruciate ligament(PCL) resection on soft tissue elasticity and knee stability in total knee arthroplasty(TKA). METHODS: Six adult cadaveric knee specimens (involving 10 knees) were included in the study. With the assistance of the robotic system(TiRobot Recon, TINAVI, Beijing), total knee arthroplasty (TKA) was performed sequentially using cruciate retaining (CR) prostheses and posterior stabilizing (PS) prostheses. Between the two surgical procedures, the femoral and tibial osteotomy surfaces were not altered;only the posterior cruciate ligament (PCL) was resected and the intercondylar fossa was treated. After installing the femoral trial component, a soft tissue balance solver was used to apply tension ranging from 30 N to 90 N in 5 N increments at 0°, 10°, and 90° of knee flexion. Meanwhile, the medial and lateral joint gaps were measured synchronously. Based on the tension-gap coupling data, the equivalent elastic coefficients of the medial and lateral soft tissue sleeves at different knee flexion angles, as well as the range of the joint line convergence angle (JLCA) under fixed varus-valgus stress, were calculated. Additionally, the gap balance status under 80 N of tension was analyzed. Self-control comparisons of each indicator were conducted before and after PCL resection to analyze the change patterns. RESULTS: After PCL resection, in the fully extended position (knee flexion 0°). The medial equivalent elastic coefficient was 32.2 (25.7, 63.3) N·mm^-1 for the CR prosthesis and 27.7 (22.0, 51.9) N·mm^-1 for the PS prosthesis, and the statistically significant difference (P=0.013). The range of JLCA was 0.41°(0.26, 0.55)° for the CR prosthesis, which was smaller than 0.75° (0.40, 0.98)° for the PS prosthesis, and the difference was statistically significant(P=0.041). At 90° of knee flexion, the medial joint gap was 10.7(10.1, 11.7) mm for the CR prosthesis, which was smaller than 12.1(10.9, 15.1) mm for the PS prosthesis, with a statistically significant difference(P=0.011). No statistically significant differences were observed in other joint gaps. CONCLUSION PCL resection reduces the rigidity of the medial soft tissues in the fully extended knee and increases the medial joint gap in the flexed position, thereby affecting knee stability and balance. This finding suggests that PS and CR prostheses may require different morphological designs, and there should be differences in indications and osteotomy strategies between CR-TKA and PS-TKA. CR-TKA is more suitable for patients with preoperative medial soft tissue laxity.
Humans ; Posterior Cruciate Ligament/physiopathology* ; Knee Joint/physiopathology* ; Arthroplasty, Replacement, Knee ; Elasticity ; Male ; Female ; Middle Aged ; Aged ; Biomechanical Phenomena ; Adult

OBJECTIVE: To construct a prediction model for fracture reduction fixator therapy using the multi-modal multi-label classification (MMC) method. METHODS: Medical record data of 818 orthopedic patients from 2019 to 2023 were collected. Medical image features were extracted using the VGG19 network, text features of TCM four diagnostic methods (Inspection, Auscultation & Olfaction, Inquiry, Palpation) were extracted via the MiniLM model, and clinical case features were extracted through a fully connected neural network. After fusing the multi-modal information, multi-label therapy prediction was achieved using a linear layer. RESULTS: Experimental results on the clinical multi-modal dataset showed that the MMC method performed excellently in terms of subset accuracy(SA), accuracy(Acc), precision, and F₁-score, reaching 0.661, 0.856, 0.897, and 0.899 respectively. When the image modality and text modality were removed, the model performance decreased by an average of 8.1% and 2.4% respectively, while the hamming loss(HL) increased by 21.1% and 5.6% respectively. CONCLUSION The fracture reduction fixator therapy prediction model constructed in this study can effectively fuse multi-modal data, accurately predict personalized treatment plans for patients, and significantly improve the accuracy and reliability of treatment decisions. It provides a new solution for the digitalization and intellectualization of Traditional Chinese Medicine(TCM) in fracture treatment and has important clinical application prospects.
Humans ; Female ; Male ; Middle Aged ; Fracture Fixation/methods* ; Adult ; Fractures, Bone/surgery* ; Neural Networks, Computer ; Medicine, Chinese Traditional ; Aged

BACKGROUND: Atrial fibrillation (AF) is a common cardiac arrhythmia in the elderly. This study aimed to evaluate urban-rural disparities in its prevalence and management in elderly Chinese. METHODS: Consecutive participants aged ≥ 65 years attending outpatient clinics were enrolled for AF screening using handheld single-lead electrocardiogram (ECG) from April 2017 to December 2022. Each ECG rhythm strip was reviewed from the research team. AF or uninterpretable single-lead ECGs were referred for 12-lead ECG. Primary study outcome comparison was between rural and urban areas for the prevalence of AF. The Student's t-test was used to compare mean values of clinical characteristics between rural and urban participants, while the Pearson's chi-square test was used to compare between-group proportions. Multivariate stepwise logistic regression analysis was performed to estimate the association between AF and various patient characteristics. RESULTS: The 29,166 study participants included 13,253 men (45.4%) and had a mean age of 72.2 years. The 7073 rural participants differed significantly (P ≤ 0.02) from the 22,093 urban participants in several major characteristics, such as older age, greater body mass index, and so on. The overall prevalence of AF was 4.6% (n = 1347). AF was more prevalent in 7073 rural participants than 22,093 urban participants (5.6% vs. 4.3%, P < 0.01), before and after adjustment for age, body mass index, blood pressure, pulse rate, cigarette smoking, alcohol consumption and prior medical history. Multivariate logistic regression analysis identified overweight/obesity (OR = 1.35, 95% CI: 1.17-1.54) in urban areas and cigarette smoking (OR = 1.62, 95% CI: 1.20-2.17) and alcohol consumption (OR = 1.42, 95% CI: 1.04-1.93) in rural areas as specific risk factors for prevalent AF. In patients with known AF in urban areas (n = 781) and rural areas (n = 338), 60.6% and 45.9%, respectively, received AF treatment (P < 0.01), and only 22.4% and 17.2%, respectively, received anticoagulation therapy (P = 0.05). CONCLUSIONS In China, there are urban-rural disparities in AF in the elderly, with a higher prevalence and worse management in rural areas than urban areas. Our study findings provide insight for health policymakers to consider urban-rural disparity in the prevention and treatment of AF.

Current ambient mass spectrometry ionization often requires external auxiliary equipment such as high-voltage power supply,gas cylinder,and syringe pump.Moreover,the process of sample preparation is cumbersome,and the experimental operations are complex,which makes it difficult to adapt to real-time on-site detection.In this work,a novel method was proposed,in which direct sampling of raw samples,online extraction of interest analytes,and ionization of target molecules were integrated into a single unit.With the developed method,the in-situ extraction and nano-electrospray ionization for both liquid and solid raw samples were achieved.Also,a handheld ion source and its pose adjustment device were developed,and the position and angle parameters were subsequently optimized.The performance of the ionization device was tested using standard solutions of caffeine and reserpine.The limits of detection(LODs)were 0.08 μg/L and 0.14 μg/L,with relative standard deviations(RSDs)≤3.7% and≤5.6%,respectively,indicating that the device possessed high sensitivity and stability.Using this device,three different concentrations of reserpine standard solutions were continuously tested for five days.The intra-day RSDs were consistently≤4.7% and the inter-day RSDs were all≤10.3%,showing the good working stability of the device.Without any pretreatment,a rapid qualitative detection of medicinal components including astragaloside II and cycloastragenol in five traditional Chinese medicines was carried out,with RSDs≤8.0% and≤7.1%,respectively.Additionally,rapid qualitative detection of gallic acid,a medicinal component,in white peony roots,and hypaphorine as well as quercetin in cowherb seeds were carried out,with RSDs≤7.0%,≤6.4% and≤6.1%,respectively.These results demonstrated that the ionization technology and device exhibited good stability during qualitative detection of raw samples.

As global greenhouse gases continue rising, the urgency of more ambitious action is clearer than ever before. China is the world's biggest emitter of greenhouse gases and one of the countries affected most by climate change. The evidence about the impacts of climate change on the environment and human health may encourage China to take more decisive action to mitigate greenhouse gas emissions and adapt to climate impacts. This article aimed to review the evidence of environmental damages and health risks posed by climate change and to provide a new science-based perspective for the delivery of sustainable development goals. Over recent decades, China has experienced a strong warming pattern with a growing frequency of extreme weather events, and the impacts of climate change on China's environment and human health have been consistently observed, with increasing O ₃ air pollution, decreases in water resources and availability, land degradation, and increased risks for both communicable and non-communicable diseases. Therefore, China's climate policy should target the key factors driving climate change and scale up strategic measures to curb carbon emissions and adapt to inevitable increasing climate impacts. It provides new insights for not only China but also other countries, particularly developing and emerging economies, to ensure climate and environmental sustainability whilst pursuing economic growth.
Climate Change ; China ; Humans ; Greenhouse Gases ; Air Pollution ; Sustainable Development ; Environment

The scaphoid bone is one of the important bone of hand,which is frequently injured and difficult to treat in clinical practice.Therefore,it is very important to deeply study the microstructure and biomechanical characteristics of the scaphoid bone for understanding its injury mechanism and optimizing treatment scheme.Microcomputed tomography(micro-CT)provides high-resolution imaging of bone tissue,while finite element analysis can help to simulate the stress distribution and behavioral patterns of the scaphoid bone under various physiological and pathological states.The high-resolution three-dimensional image of the scaphoid bone obtained by micro-CT technology can be used to construct finite element models of real anatomical structure of the scaphoid bone,thus achieving accurate simulation of the mechanical properties of the scaphoid bone.The fusion of these two advanced technologies provides a new perspective for revealing the structural and functional relationships and injury mechanism of the scaphoid bone.Therefore,this paper reviews the anatomical characteristics of the scaphoid bone and its biomechanical behavior in different states,emphasizing the specific applications and advantages of micro-CT and finite element analysis techniques in the study of the scaphoid bone.By summarizing the research findings in recent years,this paper provides novel scientific basis and methods for the diagnosis,treatment,and prevention of scaphoid bone-related disorders.

Objective:To investigate the application effect of diltiazem hydrochloride combined with sacubitril valsartan on chronic heart failure after coronary intervention(PCI).Methods:A prospective study was conducted.The cases were included from May 2020 to May 2023.After the inclusion and exclusion criteria were deleted,a total of 88 patients with chronic heart failure after PCI met the research requirements.They were divided into two groups with the same number of cases,namely 44 cases in each group.The control group received oral treatment with sacubitril and valsartan,while the observation group received additional treatment with diltiazem hydrochloride on top of the control group.Compare the clinical efficacy,changes in cardiac function related indicators and exercise endurance before and after treatment between two groups,and conduct a 1-year follow-up of all patients to record the incidence of cardiovascular adverse events during the follow-up period.Finally,compare the changes in quality of life before and after treatment between the two groups of patients.Results:The total effective rate of the observation group was 93.18％,which was higher than the control group's 77.27％(P＜0.05);After treatment,the changes of cardiac function related indexes and exercise tolerance were compared.It was found that the N-terminal B-type natriuretic peptide(NT proBNP)(45.14±6.34)pg/mL,LVEDD(51.66±3.04)mm and LVESD(32.63±4.45)mm in the observation group were lower than those in the control group,while the left ventricular ejection fraction(LVEF)(55.57±4.25)％and 6MWT(514.62±34.42)m in the observation group were higher than those in the control group(P＜0.05);During the 1-year follow-up,no death occurred in the two groups.The incidence of cardiovascular adverse events in the observation group was 4.55％,much lower than 20.45％in the control group(P＜0.05);After treatment,the scores of emotion,body,others and MLHFQ in the observation group(13.53±2.21,14.25±2.63,20.35±4.52,48.13±5.25)were lower than those in the control group(P＜0.05).Conclusion:The combination of Diltiazem Hydrochloride and Sacubitril Valsartan has significant therapeutic effects on patients with chronic heart failure after PCI.It can improve patients' cardiac function and exercise endurance,reduce the incidence of cardiovascular adverse events,and improve their quality of life.

Objective:To investigate the application effect of diltiazem hydrochloride combined with sacubitril valsartan on chronic heart failure after coronary intervention(PCI).Methods:A prospective study was conducted.The cases were included from May 2020 to May 2023.After the inclusion and exclusion criteria were deleted,a total of 88 patients with chronic heart failure after PCI met the research requirements.They were divided into two groups with the same number of cases,namely 44 cases in each group.The control group received oral treatment with sacubitril and valsartan,while the observation group received additional treatment with diltiazem hydrochloride on top of the control group.Compare the clinical efficacy,changes in cardiac function related indicators and exercise endurance before and after treatment between two groups,and conduct a 1-year follow-up of all patients to record the incidence of cardiovascular adverse events during the follow-up period.Finally,compare the changes in quality of life before and after treatment between the two groups of patients.Results:The total effective rate of the observation group was 93.18％,which was higher than the control group's 77.27％(P＜0.05);After treatment,the changes of cardiac function related indexes and exercise tolerance were compared.It was found that the N-terminal B-type natriuretic peptide(NT proBNP)(45.14±6.34)pg/mL,LVEDD(51.66±3.04)mm and LVESD(32.63±4.45)mm in the observation group were lower than those in the control group,while the left ventricular ejection fraction(LVEF)(55.57±4.25)％and 6MWT(514.62±34.42)m in the observation group were higher than those in the control group(P＜0.05);During the 1-year follow-up,no death occurred in the two groups.The incidence of cardiovascular adverse events in the observation group was 4.55％,much lower than 20.45％in the control group(P＜0.05);After treatment,the scores of emotion,body,others and MLHFQ in the observation group(13.53±2.21,14.25±2.63,20.35±4.52,48.13±5.25)were lower than those in the control group(P＜0.05).Conclusion:The combination of Diltiazem Hydrochloride and Sacubitril Valsartan has significant therapeutic effects on patients with chronic heart failure after PCI.It can improve patients' cardiac function and exercise endurance,reduce the incidence of cardiovascular adverse events,and improve their quality of life.

The scaphoid bone is one of the important bone of hand,which is frequently injured and difficult to treat in clinical practice.Therefore,it is very important to deeply study the microstructure and biomechanical characteristics of the scaphoid bone for understanding its injury mechanism and optimizing treatment scheme.Microcomputed tomography(micro-CT)provides high-resolution imaging of bone tissue,while finite element analysis can help to simulate the stress distribution and behavioral patterns of the scaphoid bone under various physiological and pathological states.The high-resolution three-dimensional image of the scaphoid bone obtained by micro-CT technology can be used to construct finite element models of real anatomical structure of the scaphoid bone,thus achieving accurate simulation of the mechanical properties of the scaphoid bone.The fusion of these two advanced technologies provides a new perspective for revealing the structural and functional relationships and injury mechanism of the scaphoid bone.Therefore,this paper reviews the anatomical characteristics of the scaphoid bone and its biomechanical behavior in different states,emphasizing the specific applications and advantages of micro-CT and finite element analysis techniques in the study of the scaphoid bone.By summarizing the research findings in recent years,this paper provides novel scientific basis and methods for the diagnosis,treatment,and prevention of scaphoid bone-related disorders.

Objective To investigate the performance of brands and types of high-flow nasal cnnula oxygen therapy(HFNC)devices at different altitudes.Methods Four different models of HFNC devices,including R-80S bi-level non-invasive ventilator integrated with HFNC device,HF-60A HFNC device,HFT-300 HFNC device and H-80A HFNC device,were connected with the gas flow meter,simularted head and QuickLung and then put into a low-pressure chamber.The flow rates of the HFNC devices were set to 10,15,20,25,30,35,40,45,50,55 and 60 L/min,and the simulated altitudes of the low-pressure chamber were set to 6 000,5 000,4 000,3 000,2 000,1 000 and 0 m.The actual output airway flow rates,airway pressure changes and trends of the four HFNC devices were recorded at different setting altitudes and flow rates.SPSS 25.0 software was used for statistical analysis.Results The actual output airway flow rates of the four HFNC devices showed an increasing trend as the altitude rose with the simulated altitude of 6 000 m and the setting flow rate kept constant,which increased slowly and even went to decrease when the altitude and flow rate exceeded some limits.The degree of changes in the flow rate with the increasing altitude varied,and there was no uniform pattern.With the rising of altitude,the actual output airway pressure of the four HFNC devices with the flow rate raning from 10 to 35 L/min also increased gradually,which showed a decreasing trend(turning point)after going up to some certain value when the flow rate exceeded 35 L/min,and the altitude where the turning point appeared was lowered as the flow rate increased.Conclusion The actual output airway flow rates and airway pressure during HFNC rise at a high-altitude environment,and generally considerations have to be taken on required airway pressure,patient comfort and the altitude of the patient's usual place of residence when setting the flow rates of the HFNC device.[Chinese Medical Equipment Journal,2024,45(6):49-58]