Guided by the concept of quality by design(QbD), this study optimizes the calcination and quenching process of calcined Magnetitum and establishes the XRD characteristic spectra of calcined Magnetitum, providing a scientific basis for the formulation of quality standards. Based on the processing methods and quality requirements of Magnetitum in the Chinese Pharmacopoeia, the critical process parameters(CPPs) identified were calcination temperature, calcination time, particle size, laying thickness, and the number of vinegar quenching cycles. The critical quality attributes(CQAs) included Fe mass fraction, Fe~(2+) dissolution, and surface color. The weight coefficients were determined by combining Analytic Hierarchy Process(AHP) and the criteria importance though intercrieria correlation(CRITIC) method, and the calcination process was optimized using orthogonal experimentation. Surface color was selected as a CQA, and based on the principle of color value, the surface color of calcined Magnetitum was objectively quantified. The vinegar quenching process was then optimized to determine the best processing conditions. X-ray diffraction(XRD) was used to establish the characteristic spectra of calcined Magnetitum, and methods such as similarity evaluation, cluster analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to evaluate the quality of the spectra. The optimized calcined Magnetitum preparation process was found to be calcination at 750 ℃ for 1 h, with a laying thickness of 4 cm, a particle size of 0.4-0.8 cm, and one vinegar quenching cycle(Magnetitum-vinegar ratio 10∶3), which was stable and feasible. The XRD characteristic spectra analysis method, featuring 9 common peaks as fingerprint information, was established. The average correlation coefficient ranged from 0.839 5-0.988 1, and the average angle cosine ranged from 0.914 4 to 0.995 6, indicating good similarity. Cluster analysis results showed that Magnetitum and calcined Magnetitum could be grouped together, with similar compositions. OPLS-DA discriminant analysis identified three key characteristic peaks, with Fe_2O_3 being the distinguishing component between the two. The final optimized processing method is stable and feasible, and the XRD characteristic spectra of calcined Magnetitum was initially established, providing a reference for subsequent quality control and the formulation of quality standards for calcined Magnetitum.
X-Ray Diffraction/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Particle Size

By employing the analytic hierarchy process(AHP), the CRITIC method(a weight determination method based on indicator correlations), and the AHP-CRITIC hybrid weighting method, the weight coefficients of evaluation indicators were determined, followed by a comprehensive score comparison. The grey correlation analysis was then performed to analyze the results calculated using the hybrid weighting method. Subsequently, a backpropagation-artificial neural network(BP-ANN) model was constructed to predict the extraction process parameters and optimize the extraction process for Shenxiong Huanglian Jiedu Granules(SHJG). In the extraction process, an L_9(3~4) orthogonal experiment was designed to optimize three factors at three levels, including extraction frequency, water addition amount, and extraction time. The evaluation indicators included geniposide, berberine, ginsenoside Rg_1 + Re, ginsenoside Rb_1, ferulic acid, and extract yield. Finally, the optimal extraction results obtained by the orthogonal experiment, grey correlation analysis, and BP-ANN method were compared, and validation experiments were conducted. The results showed that the optimal extraction process involved two rounds of aqueous extraction, each lasting one hour; the first extraction used ten times the amount of added water, while the second extraction used eight times the amount. In the validation experiments, the average content of each indicator component was higher than the average content obtained in the orthogonal experiment, with a higher comprehensive score. The optimized extraction process parameters were reliable and stable, making them suitable for subsequent preparation process research.
Drugs, Chinese Herbal/analysis* ; Neural Networks, Computer

Ferroptosis is a new type of programmed cell death different from apoptosis and necrosis.Its mechanism involves iron overload,lipid peroxidation,and reactive oxygen species(ROS)generation caused by disordered iron metabolism.Ferroptosis is associated with primary osteoporosis as well as the secondary osteoporosis such as steroid-induced osteoporosis,diabetic osteoporosis and postmenopausal osteoporosis.The Chinese medicines for the prevention and treatment of osteoporosis through the mechanism of ferroptosis mainly involve Chinese herbal compounds such as herbal pair of Eucommiae Cortex-Dipsaci Radix,Jintiange Capsules,and Bugu Shengsui Prescription,the single Chinese herbal medicine of Achyranthis Bidentatae Radix,and the active ingredients of herbal medicines such as icariin,gastrodin,quercetin,and artesunate.The prevention and treatment of osteoporosis by Chinese medicine monomer and Chinese herbal compound can inhibit ferroptosis through multiple targets and multiple pathways.At present,Chinese medicine has advantages in the prevention and treatment of postmenopausal osteoporosis.The prevention and treatment of osteoporosis by regulating the mechanism of ferroptosis can provide a direction for the future research on the prevention and treatment of osteoporosis by Chinese medicine.

Bacterial biofilms gave rise to persistent infections and multi-organ failure, thereby posing a serious threat to human health. Biofilms were formed by cross-linking of hydrophobic extracellular polymeric substances (EPS), such as proteins, polysaccharides, and eDNA, which were synthesized by bacteria themselves after adhesion and colonization on biological surfaces. They had the characteristics of dense structure, high adhesiveness and low drug permeability, and had been found in many human organs or tissues, such as the brain, heart, liver, spleen, lungs, kidneys, gastrointestinal tract, and skeleton. By releasing pro-inflammatory bacterial metabolites including endotoxins, exotoxins and interleukin, biofilms stimulated the body’s immune system to secrete inflammatory factors. These factors triggered local inflammation and chronic infections. Those were the key reason for the failure of traditional clinical drug therapy for infectious diseases.In order to cope with the increasingly severe drug-resistant infections, it was urgent to develop new therapeutic strategies for bacterial-biofilm eradication and anti-bacterial infections. Based on the nanoscale structure and biocompatible activity, nanobiomaterials had the advantages of specific targeting, intelligent delivery, high drug loading and low toxicity, which could realize efficient intervention and precise treatment of drug-resistant bacterial biofilms. This paper highlighted multiple strategies of biofilms eradication based on nanobiomaterials. For example, nanobiomaterials combined with EPS degrading enzymes could be used for targeted hydrolysis of bacterial biofilms, and effectively increased the drug enrichment within biofilms. By loading quorum sensing inhibitors, nanotechnology was also an effective strategy for eradicating bacterial biofilms and recovering the infectious symptoms. Nanobiomaterials could intervene the bacterial metabolism and break the bacterial survival homeostasis by blocking the uptake of nutrients. Moreover, energy-driven micro-nano robotics had shown excellent performance in active delivery and biofilm eradication. Micro-nano robots could penetrate physiological barriers by exogenous or endogenous driving modes such as by biological or chemical methods, ultrasound, and magnetic field, and deliver drugs to the infection sites accurately. Achieving this using conventional drugs was difficult. Overall, the paper described the biological properties and drug-resistant molecular mechanisms of bacterial biofilms, and highlighted therapeutic strategies from different perspectives by nanobiomaterials, such as dispersing bacterial mature biofilms, blocking quorum sensing, inhibiting bacterial metabolism, and energy driving penetration. In addition, we presented the key challenges still faced by nanobiomaterials in combating bacterial biofilm infections. Firstly, the dense structure of EPS caused biofilms spatial heterogeneity and metabolic heterogeneity, which created exacting requirements for the design, construction and preparation process of nanobiomaterials. Secondly, biofilm disruption carried the risk of spread and infection the pathogenic bacteria, which might lead to other infections. Finally, we emphasized the role of nanobiomaterials in the development trends and translational prospects in biofilm treatment.

Objective:To examine the application of a novel pedagogical approach multidimensional supportive psychological intervention(MSPI)in the clinical practice teaching of andrological nursing care.Methods:Using the Hamilton Depression Scale(HAMD),we assessed the psychology of 100 nursing interns about to enter clinical practice in the Department of Andrology from De-cember 2021 to December 2022.We equally randomized the subjects into an experimental and a control group,the former receiving MSPI and the latter trained on the conventional teaching model without any psychological support intervention.Results:Compared with the baseline,the HAMD scores were significantly decreased in the experimental group after intervention(12.4±2.1 vs 8.9±2.4,P＜0.01),but increased in the controls(13.1±1.8 vs 14.7±1.9,P＜0.01);the skill scores dramatically increased in the experimental group(82.6±4.7 vs 91.2±2.4,P＜0.01),but decreased in the control group after intervention(81.0±3.5 vs 80.4±2.7,P=0.28).Conclusion:MSPI can significantly enhance the learning enthusiasm of nursing students in a short period,re-duce their psychological stress and improve teaching outcomes.This approach,combining psychology with teaching,can also strength-en the mental resilience of nursing students and better confront them with future professional challenges.

Objective:To retrospectively analyze the detection and diagnosis process of two cases with double rare thalassemia genotypes,explore the causes of missed diagnosis and misdiagnosis of rare thalassemia,and improve the diagnosis level of rare thalassemia.Methods:Base on the family history,hematological phenotype and hemoglobin electrophoretic analysis results,the common genotypes of α and β-thalassemia were detected by PCR+diversion hybridization.DNA sequencing technology was used for rare α and β protein genes sequencing.Results:Both subjects were combined with double rare thalassemia genotypes,and both rare thalassemia gene combinations were reported for the first time.One of them was αβ complex thalassemia with αα*53_55 del TCC/αα heterozygous merger βIVS Ⅱ2(-T)/βN heterozygous,the other was ααIVS-Ⅱ-55(T→G)in α1/αα4,2-Q double azygous heterozygous α-thalassemia,among whichαα*53_55 del TCC/αα genotype was also reported for the first time.Conclusion:The reported rare gene type αα*53_55 del TCC/αα and two cases of rare gene combinations enriches the spectrum of gene mutations in the Chinese population,and provides richer molecular information for thalassemia diagnosis and eugenics counseling.

Childhood obesity is a global public health problem, which can not only endangers children's health, but also might be an important cause of chronic diseases in adulthood. In recent years, with the in-depth development of precision medicine research, more and more research evidences have shown that there are interactions between environmental factors, such as early intrauterine environment, children's diet, physical activity and children's gene factor on the incidence of childhood obesity, which can result in or inhibit the incidence and development of childhood obesity. This paper summarizes the progress in research in this field to reveal the effects and potential mechanisms of genetic factors and environmental factors on the incidence of childhood obesity in order to provide reference for the precise prevention and control of childhood obesity under different genetic backgrounds.
Child ; Humans ; Pediatric Obesity/genetics* ; Diet ; Causality ; Exercise ; Public Health

Objective: To establish reference values for carotid intima-media thickness (CIMT) of adult dwellers in Shenzhen City. Methods: The study was conducted based on the Shenzhen heart failure epidemiological survey from 2021 to 2022. In this survey, residents aged 18 years and above in Shenzhen were selected by using a multi-stage stratified random sampling method. General information, cardiovascular disease (CVD) related behavior and carotid ultrasound examination and etc. were collected from the participants. People with CVD factors, a history of atherosclerotic cardiovascular disease, carotid plaque or having no carotid ultrasound examination results were excluded. The parameter regression model based on fractional polynomial was used to establish the reference values of CIMT by age and sex. Results: A total of 2 163 healthy individuals were enrolled in the final analysis, including 576 males (26.6%) and 1 587 females (73.4%). The fractional polynomial regression of the CIMT mean and standard deviation was obtained. For men, the regression was mean_CIMT=0.324 7+0.006 9×age and SD_CIMT=0.076 9+0.001 2×age. For women, the regression was mean_CIMT=0.354 9+0.005 4×age and SD_CIMT=0.041 6+0.002 0×age. Conclusion: The age and sex reference values for CIMT of adult people in Shenzhen established in this study could provide the latest reference standards for early screening of subclinical CVD.
Male ; Humans ; Adult ; Female ; Carotid Intima-Media Thickness ; Cardiovascular Diseases ; Reference Values ; Carotid Arteries/diagnostic imaging* ; Ultrasonography, Carotid Arteries ; Risk Factors ; Carotid Artery Diseases

Objective: Compare and analyze the results of the domestic Lanyi AH600 glycated hemoglobin analyzer and other different detection systems to understand the comparability of the detection results of different detectors, and establish the best cut point of Lanyi AH600 determination of haemoglobin A1c (HbA1c) in the diagnosis of diabetes. Methods: Multi center cohort study was adopted. The clinical laboratory departments of 18 medical institutions independently collected test samples from their respective hospitals from March to April 2022, and independently completed comparative analysis of the evaluated instrument (Lanyi AH600) and the reference instrument HbA1c. The reference instruments include four different brands of glycosylated hemoglobin meters, including Arkray, Bio-Rad, DOSOH, and Huizhong. Scatter plot was used to calculate the correlation between the results of different detection systems, and the regression equation was calculated. The consistency analysis between the results of different detection systems was evaluated by Bland Altman method. Consistency judgment principles: (1) When the 95% limits of agreement (95% LoA) of the measurement difference was within 0.4% HbA1c and the measurement score was≥80 points, the comparison consistency was good; (2) When the measurement difference of 95% LoA exceeded 0.4% HbA1c, and the measurement score was≥80 points, the comparison consistency was relatively good; (3) The measurement score was less than 80 points, the comparison consistency was poor. The difference between the results of different detection systems was tested by paired sample T test or Wilcoxon paired sign rank sum test; The best cut-off point of diabetes was analyzed by receiver operating characteristic curve (ROC). Results: The correlation coefficient R² of results between Lanyi AH600 and the reference instrument in 16 hospitals is≥0.99; The Bland Altman consistency analysis showed that the difference of 95% LoA in Nanjing Maternity and Child Health Care Hospital in Jiangsu Province (reference instrument: Arkray HA8180) was -0.486%-0.325%, and the measurement score was 94.6 points (473/500); The difference of 95% LoA in the Tibetan Traditional Medical Hospital of TAR (reference instrument: Bio-Rad Variant II) was -0.727%-0.612%, and the measurement score was 89.8 points; The difference of 95% LoA in the People's Hospital of Chongqing Liang Jiang New Area (reference instrument: Huizhong MQ-2000PT) was -0.231%-0.461%, and the measurement score was 96.6 points; The difference of 95% LoA in the Taihe Hospital of traditional Chinese Medicine in Anhui Province (reference instrument: Huizhong MQ-2000PT) was -0.469%-0.479%, and the measurement score was 91.9 points. The other 14 hospitals, Lanyi AH600, were compared with 4 reference instrument brands, the difference of 95% LoA was less than 0.4% HbA1c, and the scores were all greater than 95 points. The results of paired sample T test or Wilcoxon paired sign rank sum test showed that there was no statistically significant difference between Lanyi AH600 and the reference instrument Arkray HA8180 (Z=1.665,P=0.096), with no statistical difference. The mean difference between the measured values of the two instruments was 0.004%. The comparison data of Lanyi AH600 and the reference instrument of all other institutions had significant differences (all P<0.001), however, it was necessary to consider whether it was within the clinical acceptable range in combination with the results of the Bland-Altman consistency analysis. The ROC curve of HbA1c detected by Lanyi AH600 in 985 patients with diabetes and 3 423 patients with non-diabetes was analyzed, the area under curve (AUC) was 0.877, the standard error was 0.007, and the 95% confidence interval 95%CI was (0.864, 0.891), which was statistically significant (P<0.001). The maximum value of Youden index was 0.634, and the corresponding HbA1c cut point was 6.235%. The sensitivity and specificity of diabetes diagnosis were 76.2% and 87.2%, respectively. Conclusion: Among the hospitals and instruments currently included in this study, among these four hospitals included Nanjing Maternity and Child Health Care Hospital in Jiangsu Province (reference instrument: Arkray HA8180), Tibetan Traditional Medical Hospital of TAR (reference instrument: Bio-Rad Variant Ⅱ), the People's Hospital of Chongqing Liang Jiang New Area (reference instrument: Huizhong MQ-2000PT), and the Taihe Hospital of traditional Chinese Medicine in Anhui Province (reference instrument: Huizhong MQ-2000PT), the comparison between Lanyi AH600 and the reference instruments showed relatively good consistency, while the other 14 hospitals involved four different brands of reference instruments: Arkray, Bio-Rad, DOSOH, and Huizhong, Lanyi AH600 had good consistency with its comparison. The best cut point of the domestic Lanyi AH600 for detecting HbA1c in the diagnosis of diabetes is 6.235%.
Pregnancy ; Child ; Humans ; Female ; Glycated Hemoglobin ; Cohort Studies ; Diabetes Mellitus/diagnosis* ; Sensitivity and Specificity ; ROC Curve

Objective: To understand the population structure of food-borne Staphylococcus (S.) aureus in China. Methods: Whole genome sequencing was used to analyze 763 food-borne S. aureus strains from 16 provinces in China from 2006 to 2020. Multilocus sequence typing (MLST), staphylococcal protein A gene (spa) typing, and staphylococcal chromosome cassettemec (SCCmec) typing were conducted, and minimum spanning tree based on ST types (STs) was constructed by BioNumerics 7.5 software. Thirty-one S. aureus strains isolated from imported food products were also included in constructing the genome phylogenetic tree. Results: A total of 90 STs (20 novel types) and 160 spa types were detected in the 763 S. aureus isolates. The 72 STs (72/90, 80.0%) were related to 22 clone complexes. The predominant clone complexes were CC7, CC1, CC5, CC398, CC188, CC59, CC6, CC88, CC15, and CC25, accounting for 82.44% (629/763) of the total. The STs and spa types in the predominant clone complexes changed over the years. The methicillin-resistant S. aureus (MRSA) detection rate was 7.60%, and 7 SCCmec types were identified. The ST59-t437-Ⅳa (17.24%, 10/58), ST239-t030-Ⅲ (12.07%, 7/58), ST59-t437-Ⅴb (8.62%, 5/58), ST338-t437-Ⅴb (6.90%, 4/58) and ST338-t441-Ⅴb (6.90%, 4/58) were the main types in MRSA strains. The genome phylogenetic tree had two clades, and the strains with the same CC, ST, and spa types clustered together. All CC7 methicillin sensitive S. aureus strains were included in Clade1, while 21 clone complexes and all MRSA strains were in Clade2. The MRSA strains clustered according to the SCCmec and STs. The strains from imported food products in CC398, CC7, CC30, CC12, and CC188 had far distances from Chinese strains in the tree. Conclusions: In this study, the predominant clone complexes of food-borne strains were CC7, CC1, CC5, CC398, CC188, CC59, CC6, CC88, CC15, and CC25, which overlapped with the previously reported clone complexes of hospital and community-associated strains in China, suggesting that close attention needs to be paid to food, a vehicle of pathogen transmission in community and food poisoning.
Humans ; Staphylococcus aureus/genetics* ; Methicillin-Resistant Staphylococcus aureus/genetics* ; Multilocus Sequence Typing ; Phylogeny ; Staphylococcal Infections/epidemiology* ; China/epidemiology*