ObjectiveTo investigate the mechanism by which Mingshi prescription regulates the retinal melanopsin-dopamine （Opn4-DA） axis in myopic mice to inhibit endoplasmic reticulum （ER） stress in the retina and sclera， thereby delaying axial elongation associated with myopia. MethodsSixty 4-week-old male SPF-grade C57BL/6J mice were randomly divided into a normal group， a form-deprived myopia group （FDM group）， an intrinsically photosensitive retinal ganglion cells ablation group （ipRGCs group）， a Mingshi Prescription group （MSF group， 5.2 g·kg^-1）， and an ipRGCs + MSF group （5.2 g·kg^-1）. Except for the normal group， all other groups underwent FDM modeling. Additionally， the ipRGCs and ipRGCs + MSF groups received retinal ipRGC ablation. Three weeks after modeling， the MSF and ipRGCs + MSF groups were administered Mingshi prescription via continuous gavage for six weeks. After refraction and axial length were measured in all mice， eyeballs were collected along with retinal and scleral tissues. Pathological and morphological changes in the retina， choroid， and sclera were observed using periodic acid-Schiff （PAS） staining. Western blot was employed to detect the relative protein expression levels of dopamine D1 receptor （DRD1）， C/EBP homologous protein （CHOP）， and glucose-regulated protein 78 （GRP78） in the retina， and CHOP and GRP78 in the sclera. Real-time PCR was used to detect the relative mRNA expression of Opn4， CHOP， and GRP78 in the retina， and CHOP and GRP78 in the sclera. Immunofluorescence staining （IF） was performed to detect the expression of Opn4 and DRD1 in retinal tissues. ResultsCompared with the normal group， the FDM group showed a significant myopic shift in refraction （P<0.05） and a significant increase in axial length （P<0.05）. The retinal layers were thinner， the number of ganglion cells was reduced， and collagen fibers in the sclera were loosely arranged with evident gaps. Opn4 and DRD1 protein and mRNA expression in the retina were significantly decreased （P<0.05）， while CHOP and GRP78 protein and mRNA expression in both retinal and scleral tissues were significantly increased （P<0.05）. Compared with the FDM group， the ipRGCs group exhibited further increases in myopic refraction and axial length （P<0.05）， more pronounced thinning and looseness in the retinal， choroidal， and scleral layers， lower expression of Opn4 and DRD1 protein and mRNA in the retina （P<0.05）， and higher expression of CHOP and GRP78 protein and mRNA in the retina and sclera （P<0.05）. Compared with the FDM group， the MSF group showed significantly reduced refractive error and axial length （P<0.05）， with improved cellular number， arrangement， and thickness in ocular tissues， increased Opn4 and DRD1 protein and mRNA expression in the retina （P<0.05）， and reduced CHOP and GRP78 protein and mRNA expression in both retina and sclera （P<0.05）. Similarly， the ipRGCs + MSF group showed significant improvements in terms of the above items compared with the ipRGCs group （P<0.05）. ConclusionMingshi Prescription delays myopic axial elongation and refractive progression by regulating the Opn4-DA axis in the retina of myopic mice， thereby inhibiting ER stress in the retina and sclera. This intervention promotes Qi and blood nourishment of the eyes， softens the fascia， and restores ocular rhythm.

Metastatic dissemination is the major cause of death from breast-cancer (BC). Fusobacterium nucleatum (F.n) is widely enriched in BC and has recently been identified as one of the high-risk factors for promoting BC metastasis. Here, with an experimental model, we demonstrated that intratumoral F.n induced BC aggressiveness by transcriptionally activating Epithelial-mesenchymal transition-associated genes. Therefore, the F.n may be a potential target to prevent metastasis. Given the fact that cancer-associated fibroblasts (CAFs) are abundant in BC and located near blood vessels, we report an optogenetic system that drives CAF to in situ produce human antibacterial peptide LL37, with the characteristics of biosafety and freely intercellular trafficking, for depleting intratumoral F.n, leading to a 72.1% reduction in lung metastatic nodules number without affecting the balance of the systemic flora. Notably, mild photothermal treatment was found that could normalize CAF, contributing to synergistically inhibiting BC metastasis. In addition, the system can also simultaneously encode a gene of TNF-related apoptosis-inducing ligand to suppress the primary tumor. Together, our study highlights the potential of local elimination of tumor pathogenic bacteria to prevent BC metastasis.

BACKGROUND:Condylar prosthesis replacement,as one of the surgical methods for the treatment of temporomandibular joint diseases,not only needs to restore the morphology and function,but also needs to ensure long-term stable application.OBJECTIVE:To design finite element analysis of a customized Gyroid condylar prosthesis.METHODS:Gyroid structure specimens with different wall thicknesses(250,350,450,550,650,and 750 μm)were designed by software.Finite element simulation compression experiments were carried out to test the elastic modulus of the specimens.The Gyroid structure wall thickness range that matches the elastic modulus of mandibular cancellous bone and whose pore size meets the osteogenesis conditions was screened out.This range was subdivided and Gyroid structure specimens were made using 3D printing technology.Mechanical compression experiments were carried out on a universal testing machine.The Gyroid structure wall thickness that meets the mechanical properties of mandibular bone,has an easier osteogenesis and a smaller strength was screened out by elastic modulus and compressive strength,and subsequent experiments were carried out.A three-dimensional model of a customized Gyroid condylar prosthesis was designed,and the finite element analysis of the blade jaw position and cusp interdigitation position of the model under natural occlusion was simulated.RESULTS AND CONCLUSION:(1)Finite element analysis results showed that with the increase of wall thickness,the elastic modulus of Gyroid structure specimens increased.The elastic modulus of Gyroid structure specimens with wall thickness of 350,450,550,650,and 750 μm matched the elastic modulus of mandibular cancellous bone.Since the subsequent experiments needed to be subdivided into groups and the pore size of the 550,650,and 750 μm wall thickness group(pore size 800-1 000 μm)was within the osteogenesis range.Gyroid structure specimens with wall thickness of 550,600,650,700,and 750μm were selected for mechanical compression experiments on a universal testing machine.(2)The results of mechanical compression experiments showed that with the increase of wall thickness,the elastic modulus and compressive strength of Gyroid structure specimens increased.The elastic modulus of Gyroid structure specimens with wall thickness of 550,600,and 650 μm was within the elastic modulus of the mandibular cancellous bone.Finally,the wall thickness of 650 μm and the pore size of 900 μm were selected to construct the three-dimensional model of the mandibular customized Gyroid condylar prosthesis.(3)The results of finite element analysis of three-dimensional model of the mandibular customized Gyroid condylar prosthesis showed that the stress of the articular disc in the edge-to-edge occlusion was mainly concentrated on the lower surface of the anterior middle band,and the stress of the articular disc in the interposition of tooth tips was mainly concentrated on the lateral surface of the lower surface.The maximum displacement and the maximum equivalent stress of the left and right articular discs in the edge-to-edge occlusion and the interposition of tooth tips were similar.The maximum displacement was 0.031,0.030,0.028,and 0.018 mm,and the maximum equivalent stress was 2.87,2.30,2.73,and 1.71 MPa,respectively.(4)The results showed that the Gyroid structure with a wall thickness of 650 μm was consistent with the mechanical properties of the mandible,which reduced the strength of the titanium alloy and reduced the damage of the articular disc caused by the customized Gyroid condylar prosthesis.

BACKGROUND:Based on the principle of vertical tooth movement,a personalized orthodontic appliance is created through digital design combined with 3D printing,so that the personalized orthodontic appliance forms a support system with the individual incisors.With the help of the absolute support of the micro-implant,the single tooth is precisely controlled in a three-dimensional direction.OBJECTIVE:To design personalized orthodontic appliances with 11,12,21,and 22 intrusion and extrusion based on biomechanical principles,and analyze the safety of the personalized orthodontic appliances in terms of their movement effect on the teeth by means of the three-dimensional finite element method.METHODS:Three-dimensional finite element models of alveolar bone-periodontium-maxillary incisors-personalized cantilever micro-implant-connecting plates-personalized brackets in the maxillary anterior region(teeth numbers 11,12,21,and 22)were established using Mimics,Geomagic Wrap,SolidWorks,and Ansys Workbench software,respectively.Personalized orthodontic appliances with low pressure movement and extended movement were set up at each tooth position.The stress level of each component of the personalized orthodontic appliances was analyzed,and the tooth displacement and periodontal stress distribution were calculated under loading of 300 g tensile or thrust force.RESULTS AND CONCLUSION:(1)The maximum equivalent force on the personalized intrusion mobile orthodontic appliance was 162.90 MPa,and the maximum equivalent force on the personalized extrusion mobile orthodontic appliance was 239.57 MPa.The maximum equivalent stress on both devices was located in the vertical portion of the personalized bracket loading attachment.The equivalent stresses on each part of the personalized orthodontic appliance were all within the yield strength,and they had good safety.(2)The initial displacement of the teeth under the action of the personalized orthodontic appliances showed a tendency towards overall intrusion or extrusion,with the displacement in the vertical direction far exceeding that in the horizontal and sagittal directions.The equivalent stress peak appeared at the root tip or neck of the periodontal membrane,and the equivalent stress concentration area appeared in the periodontal membrane of the root apical region.(3)The results show that the personalized orthodontic appliance allows 11,12,21,and 22 to approximate either intrusion movement or extrusion movement,initially confirming the effectiveness of the personalized vertical movement orthodontic appliance.

BACKGROUND:Currently,the mandibular joint prosthesis manufactured at home and abroad needs to rely on screws to fix the condylar part of the prosthesis during the replacement process,and the retention hole is reserved to facilitate the operation during the operation.However,due to the lack of personalized jaw design,the reattachment plate may not fit the jaw,resulting in screw loosening and dislocation.Therefore,personalized condylar prosthesis replacement is of great value in the repair of the temporomandibular joint.OBJECTIVE:To design a personalized condylar prosthesis with an internal GYROID for mandibular condylar repair and reconstruction.METHODS:The GYROID structure was selected in the Rhinoceros 7 software with the single cell size of 6 mm and the wall thickness of 0.2,0.3,0.4,0.5,0.6,0.7,0.8 mm.The mechanical properties of the GYROID structure were analyzed by finite element method.3D printing of GYROID structural test specimens with different wall thickness(0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was performed to test the mechanical properties of the specimens through room temperature compression experiments.A wall thickness value conforming to the range of mandibular mechanical properties was selected through finite element analysis and room temperature compression test results.An adult male mandibular CT data were used for inverse modeling to design a condylar prosthesis with an internal GYROID.Finite element analysis was used to simulate the movement of the apical staggered position and the opposite-blade jaw position after condylar prosthesis replacement.RESULTS AND CONCLUSION:(1)The results of finite element analysis and room temperature compression experiment showed that the elastic modulus of the GYROID structure increased with the increase of wall thickness.The elastic modulus of the GYROID structure with wall thickness of 0.5-0.7 mm was within the range of the elastic modulus of the mandible(1.5-4.0 GPa).Therefore,the 6 mm monocellular GYROID structural model with a wall thickness of 0.6 mm was selected for the design of the condylar prosthesis.(2)The results of finite element analysis showed that the stress distribution of mandibular model was symmetrical.The stress distribution of the two types of occlusion was roughly the same,and the stress peak was not significantly different.The stress concentrated in the neck of the condylar prosthesis,and the stress on the replacement side was slightly larger than that on the healthy side.The maximum equivalent stress of the whole internal fixation model was 269.34 MPa,and the maximum equivalent stress of the screw was 20.14 MPa.The equivalent stress and equivalent strain values of the prosthesis were greater than that of the opposite edge jaw position when the tooth tip was interlaced.The equivalent stress and equivalent strain values of the screw were smaller than that of the opposite edge jaw position when the tooth tip was interlaced.(3)The results showed that the design and retention of the personalized GYROID condylar prosthesis were good,which was consistent with the mechanical conduction of the mandible.

BACKGROUND:Porous structures based on triple periodic minimal surfaces are one of the most promising orthopedic biostructures,among which the Gyroid structure is characterized by high specific surface area,high permeability,and zero mean curvature.OBJECTIVE:To screen the wall thickness interval of TC4 bionic bone scaffolds with 4 mm single-cell Gyroid structure matching the elastic modulus range of cancellous bone of the mandible through finite element analysis combined with mechanical compression test testing.METHODS:The finite element model of the 4 mm single-cell Gyroid structure with different wall thickths(0.1,0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was established.The equivalent elastic modulus of the Gyroid structure was analyzed,and the wall thickness interval of the Gyroid structure matching the elastic modulus range of the maxillary resinous bone was selected with different wall thicknesses of 0.2,0.3,0.4,0.5,0.6,and 0.7 mm,respectively.According to finite element analysis screening results,the material selected was Ti6Al4V.Selective laser melting was used to prepare 3D printed Gyroid structure specimens.The surface treatment was carried out by large-grained sand blasting and acid etching.The elastic modulus and compressive strength of the specimen were tested by mechanical compression experiment.RESULTS AND CONCLUSION:(1)The finite element analysis results showed that the equivalent elastic modulus of the Gyroid structure increased with the increase of wall thickness,and the equivalent elastic modulus of the Gyroid structure with wall thickness of 0.2-0.7 mm was within the range of the elastic modulus of the spongy bone of the mandible(1.5-4.0 GPa),which was used for 3D printing of the Gyroid structure specimen.(2)The mechanical compression test results showed that the elastic modulus and compressive strength of the Gyroid structural specimen increased with the increase of wall thickness,and the elastic modulus of the Gyroid structural specimen with wall thickness of 0.3-0.5 mm was within the range of the elastic modulus of the cancellous bone of the mandible.The compressive strength of the Gyroid specimen with 0.3-0.7 mm wall thickness was consistent with the mechanical properties of the mandible.(3)The results show that the Gyroid structure of 0.3-0.5 mm wall thickness is compatible with the range of elastic modulus of the mandible.

Objective:To investigate the effect of Huanshaodan on improving learning and memory impairment in a mouse model of Alzheimer's disease (AD) which was named with senescence accelerated mouse-prone 8(SAMP8), as well as the neuroinflammatory response mechanisms mediated by the p38 mitogen activated protein kinase (p38MAPK) and extracellular signal regulated protein kinase 1/2 (ERK1/2) signaling pathways.Methods:Seven-month-old SPF grade male SAMP8 mice were randomly assigned into three groups(6 mice in each group) using a random number table: model group, low-dose Huanshaodan group(1.17g/kg, twice daily via gavage), and high-dose Huanshaodan group(2.34g/kg, twice daily via gavage).Weight-matched seven-month-old male mice with anti-rapid aging traits(senescence-accelerated mouse-resistant 1, SAMR1)were designated as the normal control group( n=6).The mice in control group and the model group received 0.9% NaCl via gavage twice daily.All mice underwent continuous interventions for 28 days.The learning and memory abilities were assessed by Morris water maze.Immunofluorescence staining was used to detect the expression of glial fibrillary acidic protein(GFAP) and ionized calcium-binding adaptor molecule-1(Iba1) as markers for astrocytes and microglial cells in the hippocampus, respectively.ELISA was used to measure pro-inflammatory cytokines interleukin-6(IL-6), interleukin-1β(IL-1β) and tumor necrosis factor-α(TNF-α) in hippocampal tissue.Western blot was used for analyzing the expression levels of pro-inflammatory enzymes, inducible nitric oxide synthase(iNOS) and cyclooxygenase-2(COX-2), as well as phosphorylated levels of ERK1/2 and p38MAPK in hippocampal tissue.Data were statistically analyzed using SPSS 20.0.The repeated measures analysis of variance or one-way analysis of variance was used for multi groups comparison. Results:Morris water maze test results indicated interactions between time and group in the escape latencies of the four groups of mice( F=3.787, P<0.05).From the 5th to 6th day, the escape latencies of the low- and high-dose Huanshaodan groups were lower than those of the model group(both P<0.05).On the 4th to 6th day, the escape latencies of the high-dose Huanshaodan group were lower than those of the low-dose group(all P<0.05).Significant differences were observed in the residence time in the target quadrant and the number of crossing the platform among the four groups of mice( F=8.587, 12.633, both P<0.05).The residence time in the target quadrant of the model group((17.8±3.4)s) and the number of crossing the platform((1.6±0.6)times)were less than those of the control group((40.6±3.7)s, (4.6±0.6)times) and high-dose Huanshaodan group(31.8±4.0)s, (2.8±0.8)times), all P<0.05).Western blot results indicated significant differences in the expression of iNOS, COX-2, p-p38MAPK/p38MAPK, and p-ERK1/2/ERK1/2 in the hippocampal tissues of the four groups of mice( F=207.516, 10.627, 108.497, 34.330, all P<0.05) and the indexes in model group were all higher than those of control group and high-dose Huanshaodan group(all P<0.05).ELISA results revealed significant differences in the levels of IL-6, TNF-α and IL-1β in the serum of the four groups of mice( F=66.790, 82.424, 42.919, all P<0.05), and the indexes of model group were higher than those of the other three groups(all P<0.05).Immunofluorescence results showed significant differences in the relative fluorescence intensity of GFAP and Iba1 in the hippocampal tissues of the four groups of mice( F=20.269, 56.437, both P<0.05).The relative fluorescence intensity values of GFAP and Iba1 in the hippocampal tissues of the high-dose Huanshaodan group were lower than those of the model group(both P<0.05), while the expression level of Iba1 in high-dose group was lower than that in the low-dose group( P<0.05). Conclusion:High-dose Haunshaodan may inhibit the activation of hippocampal glial cells by blocking the p38MAPK and ERK1/2 pathways, reducing neuroinflammation, then improving learning and memory disorders in SAMP8 mice.

Objective:To study the relationship between the levels of multiple elements in urine and the risk of arsenic poisoning in populations exposed to drinking water arsenic in Inner Mongolia Autonomous Region (Inner Mongolia).Methods:From April 2023 to January 2024, a case-control study method was used to select 128 individuals with a residence time of ≥10 years in drinking water arsenic exposed areas in Inner Mongolia as study subjects. Eighty-one individuals diagnosed with arsenic poisoning were selected as the case group, and 47 healthy individuals were selected as the control group for urine sample collection and questionnaire survey. Inductively coupled plasma mass spectrometry was employed to determine the levels of 10 elements (chromium, manganese, cobalt, nickel, copper, zinc, arsenic, molybdenum, cadmium and lead) in urine. The levels of each element in urine were divided into four groups ( Q1, Q2, Q3, and Q4 groups) based on quartiles. The associations between the levels of various elements in urine and the risk of arsenic poisoning were studied using binary logistic regression model and restricted cubic spline (RCS). Results:The age of the control group and the case group [ M ( Q1, Q3)] were 61 (53, 69) and 61 (56, 67) years old, respectively. There were 19 and 43 males, and 28 and 38 females, respectively. There was no statistically significant differences in age and and gender composition between the two groups ( Z = - 0.39, P = 0.700; χ 2 = 1.91, P = 0.167). The levels of urinary copper and cadmium of the case group were higher than those of the control group, and the differences were statistically significant ( Z = - 2.66, - 2.16, P < 0.05). The results of univariate logistic regression analysis showed that urinary copper was an influencing factor for arsenic poisoning ( P = 0.017). The results of multivariate logistic regression analysis revealed that after adjusting for covariates, urinary copper and arsenic were independent influencing factors of arsenic poisoning ( P < 0.05). Taking Q1 group as a reference, urinary copper in Q3 group [ OR (95% CI) = 8.23 (1.81, 37.39), P = 0.006] increased the risk of arsenic poisoning, while urinary arsenic in Q2, Q3, and Q4 groups [ OR (95% CI) = 0.24 (0.06, 0.92), 0.12 (0.03, 0.53), 0.15 (0.04, 0.63), P < 0.05] decreased the risk of arsenic poisoning. After adjusting for covariates, RCS did not show a dose-response relationship between urinary copper, urinary arsenic, and arsenic poisoning ( P > 0.05). Conclusion:Urinary arsenic and copper are associated with the risk of arsenic poisoning in the drinking water arsenic exposed areas of Inner Mongolia, copper exposure may contribute significantly to arsenic poisoning.

Objective:To investigate the effect of Huanshaodan on improving learning and memory impairment in a mouse model of Alzheimer's disease (AD) which was named with senescence accelerated mouse-prone 8(SAMP8), as well as the neuroinflammatory response mechanisms mediated by the p38 mitogen activated protein kinase (p38MAPK) and extracellular signal regulated protein kinase 1/2 (ERK1/2) signaling pathways.Methods:Seven-month-old SPF grade male SAMP8 mice were randomly assigned into three groups(6 mice in each group) using a random number table: model group, low-dose Huanshaodan group(1.17g/kg, twice daily via gavage), and high-dose Huanshaodan group(2.34g/kg, twice daily via gavage).Weight-matched seven-month-old male mice with anti-rapid aging traits(senescence-accelerated mouse-resistant 1, SAMR1)were designated as the normal control group( n=6).The mice in control group and the model group received 0.9% NaCl via gavage twice daily.All mice underwent continuous interventions for 28 days.The learning and memory abilities were assessed by Morris water maze.Immunofluorescence staining was used to detect the expression of glial fibrillary acidic protein(GFAP) and ionized calcium-binding adaptor molecule-1(Iba1) as markers for astrocytes and microglial cells in the hippocampus, respectively.ELISA was used to measure pro-inflammatory cytokines interleukin-6(IL-6), interleukin-1β(IL-1β) and tumor necrosis factor-α(TNF-α) in hippocampal tissue.Western blot was used for analyzing the expression levels of pro-inflammatory enzymes, inducible nitric oxide synthase(iNOS) and cyclooxygenase-2(COX-2), as well as phosphorylated levels of ERK1/2 and p38MAPK in hippocampal tissue.Data were statistically analyzed using SPSS 20.0.The repeated measures analysis of variance or one-way analysis of variance was used for multi groups comparison. Results:Morris water maze test results indicated interactions between time and group in the escape latencies of the four groups of mice( F=3.787, P<0.05).From the 5th to 6th day, the escape latencies of the low- and high-dose Huanshaodan groups were lower than those of the model group(both P<0.05).On the 4th to 6th day, the escape latencies of the high-dose Huanshaodan group were lower than those of the low-dose group(all P<0.05).Significant differences were observed in the residence time in the target quadrant and the number of crossing the platform among the four groups of mice( F=8.587, 12.633, both P<0.05).The residence time in the target quadrant of the model group((17.8±3.4)s) and the number of crossing the platform((1.6±0.6)times)were less than those of the control group((40.6±3.7)s, (4.6±0.6)times) and high-dose Huanshaodan group(31.8±4.0)s, (2.8±0.8)times), all P<0.05).Western blot results indicated significant differences in the expression of iNOS, COX-2, p-p38MAPK/p38MAPK, and p-ERK1/2/ERK1/2 in the hippocampal tissues of the four groups of mice( F=207.516, 10.627, 108.497, 34.330, all P<0.05) and the indexes in model group were all higher than those of control group and high-dose Huanshaodan group(all P<0.05).ELISA results revealed significant differences in the levels of IL-6, TNF-α and IL-1β in the serum of the four groups of mice( F=66.790, 82.424, 42.919, all P<0.05), and the indexes of model group were higher than those of the other three groups(all P<0.05).Immunofluorescence results showed significant differences in the relative fluorescence intensity of GFAP and Iba1 in the hippocampal tissues of the four groups of mice( F=20.269, 56.437, both P<0.05).The relative fluorescence intensity values of GFAP and Iba1 in the hippocampal tissues of the high-dose Huanshaodan group were lower than those of the model group(both P<0.05), while the expression level of Iba1 in high-dose group was lower than that in the low-dose group( P<0.05). Conclusion:High-dose Haunshaodan may inhibit the activation of hippocampal glial cells by blocking the p38MAPK and ERK1/2 pathways, reducing neuroinflammation, then improving learning and memory disorders in SAMP8 mice.

Objective To study the effect of Liuwei Dihuangwan on autophagy level and its mechanism in SAMP8 mice and Aβ-stimulated BV2 cell model,and to explore the molecular mechanism of tonifying the kidney and filling up the essence to prevent and control Alzheimer's disease(AD)through interfering with autophagy.Methods Ten 7-month-old male anti-aging mice(SAMR1)were taken as the normal group,and 40 7-month-old male rapid aging mice(SAMP8)were randomly control and model groups,equal volumes of saline were administered by gavage twice a day for 4 weeks,and the levels of Aβ expression in the hippocampus of the mice in each group were detected by immunofluorescence;The expression levels of FcγRⅡB,c-Src and SHP-1 in the hippocampus of each group were detected by Western blot;BV2 cells were cultured and Fcγ receptor Ⅱ-b(FcγRⅡB)overexpression vectors were constructed;the AD state cell model was established by treating the BV2 cells with 5 μmol·L-1 Aβ1-42,and the Liuwei Dihuangwan drug-containing serum was prepared.The cells were divided into NC group,Aβ1-42 group,blank serum group,drug-containing serum group,Vector group,FcγRⅡB OE group,and drug-containing serum+FcγRⅡB OE group;immunofluorescence was used to detect the expression level of Aβ protein in the cells of each group;Western blot was used to detect the expression level of p62,LC3 Ⅱ/Ⅰ,FcγRⅡB,SHP-1,and c-Src in cells of each group.Results Compared with the normal group,the hippocampal Aβ,FcγRⅡB,SHP-1,and c-Src expression levels in the model group of mice were significantly higher(P<0.01),and compared with the model group,the expression levels of Aβ,FcγRⅡB,SHP-1,and c-Src in the low-,medium-,and high-dose groups of Liuwei Dihuangwan were significantly lower(P<0.01),it also showed a significant dose dependent relationship.Compared with NC group,the protein expressions of Aβ,p62,FcγRⅡB,SHP-1 and c-Src in Aβ1-42 group were significantly increased(P<0.01),and LC3Ⅱ/Ⅰ was significantly decreased(P<0.01);Compared with Aβ1-42 group and blank serum group,the protein expressions of Aβ,p62,FcγRⅡB,SHP-1 and c-Src in drug-containing serum group were significantly decreased(P<0.01),and LC3Ⅱ/Ⅰ was significantly increased(P<0.01);Compared with NC group and Vector group,the expression of Aβ in FcγRⅡB OE group was increased,the protein expressions of p62,FcγRⅡB,SHP-1 and c-Src were significantly increased(P<0.01),and LC3Ⅱ/Ⅰ was significantly decreased(P<0.01);Compared with the drug-containing serum group,the protein expressions of Aβ,p62,FcγRⅡB,SHP-1 and c-Src in the drug-containing serum+FcγRⅡB OE group were significantly increased(P<0.01),and the protein expression levels of LC3Ⅱ/Ⅰ were significantly decreased(P<0.01).Conclusion Liuwei Dihuangwan improved AD by inhibiting microglia FcγRⅡB/c-Src pathway and increasing autophagy level.