OBJECTIVE: This study aimed to explore the association between body mass index (BMI) and mortality based on the 10-year population-based multicenter prospective study. METHODS: A general population-based multicenter prospective study was conducted at four sites in rural China between 2013 and 2023. Multivariate Cox proportional hazards models and restricted cubic spline analyses were used to assess the association between BMI and mortality. Stratified analyses were performed based on the individual characteristics of the participants. RESULTS: Overall, 19,107 participants with a sum of 163,095 person-years were included and 1,910 participants died. The underweight (< 18.5 kg/m ²) presented an increase in all-cause mortality (adjusted hazards ratio [ aHR] = 2.00, 95% confidence interval [ CI]: 1.66-2.41), while overweight (≥ 24.0 to < 28.0 kg/m ²) and obesity (≥ 28.0 kg/m ²) presented a decrease with an aHR of 0.61 (95% CI: 0.52-0.73) and 0.51 (95% CI: 0.37-0.70), respectively. Overweight ( aHR = 0.76, 95% CI: 0.67-0.86) and mild obesity ( aHR = 0.72, 95% CI: 0.59-0.87) had a positive impact on mortality in people older than 60 years. All-cause mortality decreased rapidly until reaching a BMI of 25.7 kg/m ² ( aHR = 0.95, 95% CI: 0.92-0.98) and increased slightly above that value, indicating a U-shaped association. The beneficial impact of being overweight on mortality was robust in most subgroups and sensitivity analyses. CONCLUSION This study provides additional evidence that overweight and mild obesity may be inversely related to the risk of death in individuals older than 60 years. Therefore, it is essential to consider age differences when formulating health and weight management strategies.
Humans ; Body Mass Index ; China/epidemiology* ; Male ; Female ; Middle Aged ; Prospective Studies ; Rural Population/statistics & numerical data* ; Aged ; Follow-Up Studies ; Adult ; Mortality ; Cause of Death ; Obesity/mortality* ; Overweight/mortality*

Bone defect repair is an urgent problem in the field of orthopedics,and numerous researchers are working to develop more effective treatment plans.The accurate evaluation of bone repair after surgery is a crucial step.In line with the development of computed tomography(CT)imaging,dual-energy CT imaging has shown significant advantages in analyzing bone composition and reducing metal artifacts.This article reviews the application of dual-energy CT imaging for the evaluation of bone repair in animals.

Bone defect repair is an urgent problem in the field of orthopedics,and numerous researchers are working to develop more effective treatment plans.The accurate evaluation of bone repair after surgery is a crucial step.In line with the development of computed tomography(CT)imaging,dual-energy CT imaging has shown significant advantages in analyzing bone composition and reducing metal artifacts.This article reviews the application of dual-energy CT imaging for the evaluation of bone repair in animals.

Objective:To assess the effect of using different thicknesses of reconstruction layer and different thicknesses of region of interest (ROI) on the results of vertebral bone mineral density (BMD) values that were measured by quantitative computed tomography (QCT). Methods:A total of 100 patients who underwent QCT screening for opportunistic osteoporosis between May and September 2021 at the First Affiliated Hospital of Zhengzhou University were retrospectively collected. Images that the thicknesses of QCT reconstruction layer were respectively 1 and 5 mm were transferred to the QCT Pro workstation,and ROI thicknesses were adjusted to 5,7,and 9 mm,respectively. The average BMD values of QCT measurements were recorded under different thicknesses of reconstruction layer and different ROI thicknesses. Then,the effects of the choose of different thicknesses of reconstruction layer and the different ROI thicknesses on BMD values that were measured by QCT were analyzed. Results:The average BMD values of 1 mm and 5 mm thicknesses of reconstruction layer were respectively (117.41±45.97) mg/cm3 and (118.77±44.84) mg/cm3 when ROI thickness was 5 mm,with a statistically significant difference (t=-2.283,P<0.05). The average BMD values of 1 mm and 5 mm thicknesses of reconstruction layer were respectively (116.38±46.06) mg/cm3 and (119.06±44.55) mg/cm3 when the ROI thickness was 7mm,and the difference was statistically significant (t=-3.280,P<0.05). The average BMD values of 1 mm and 5 mm thicknesses of reconstruction layer were respectively (116.25±45.36) mg/cm3 and (120.12±44.10) mg/cm3 when the ROI thickness was 9 mm,and the difference was statistically significant (t=-5.841,P<0.001). The differences in BMD measurement values among 5,7 and 9 mm ROI thicknesses were not statistically significant when the thicknesses of reconstruction layer were respectively 1 and 5 mm. Conclusion:There is an effect of the thickness of QCT reconstruction layer on average BMD measurement values,and 1 mm thickness of reconstruction layer is more suitable to clinical application,while there is not significant effect in ROI thickness on average BMD measurement value of QCT. In clinical application,it is feasible to adjust ROI thickness according to actual situation so as to avoid the effect caused by some factors such as fracture or vertebral implants.

Objective To observe the correlations of artificial intelligence(AI)measured parameters on anteroposterior and lateral spinal X-ray films with the severity of adolescent idiopathic scoliosis(AIS).Methods Totally 1 786 AIS patients were retrospectively enrolled.Parameters including Cobb angle(CA),coronal balance distance(CBD),T1 slope(T1S),pelvic tilt(PT),sacral slope(SS),apical vertebral translation(AVT),thoracic trunk shift(TTS),thoracic kyphosis(TK)and sagittal vertical axis(SVA)on anteroposterior and lateral spinal X-ray films were measured using uAI DR scoliosis analysis system.The severity of AIS was evaluated according to CA,and the correlations between other parameters and the severity of AIS were explored.The above parameters were compared under different severity levels and coronal/sagittal equilibrium states.Multivariate logistic regression analysis was performed to screen the independent impact factors on the severity of AIS.Results Significant differences of the above parameters were found among different severity levels except for SVA(all P＜0.001).With the aggravation of AIS,CA,CBD,AVT and TTS increased successively(all P＜0.001).T1S of severe AIS was higher than that of mild and moderate AIS(both P＜0.001),PT and SS of moderate and severe AIS were all bigger,while their TK were smaller than those of mild AIS(all P＜0.001).Significant differences of CA,T1S,PT,SS,AVT,TTS and TK were found between coronal balanced and imbalanced AIS(all P＜0.05),while of TK were found between sagittal balanced and unbalanced AIS(P=0.026).CBD,T1S,PT,SS,AVT and TTS were all positively correlated(r,=0.136-0.606,all P＜0.001),while TK was negatively correlated(r,=—0.404,P＜0.001)with the severity of AIS.T1S,AVT and TTS were all independent impact factors of the severity of AIS(all P＜0.001).Conclusion Among AI measured parameters on anteroposterior and lateral spinal X-ray films,CBD,T1S,PT,SS,AVT and TTS were positively correlated,while TK was negatively correlated with the severity of AIS.

Objective:To assess the effect of using different thicknesses of reconstruction layer and different thicknesses of region of interest (ROI) on the results of vertebral bone mineral density (BMD) values that were measured by quantitative computed tomography (QCT). Methods:A total of 100 patients who underwent QCT screening for opportunistic osteoporosis between May and September 2021 at the First Affiliated Hospital of Zhengzhou University were retrospectively collected. Images that the thicknesses of QCT reconstruction layer were respectively 1 and 5 mm were transferred to the QCT Pro workstation,and ROI thicknesses were adjusted to 5,7,and 9 mm,respectively. The average BMD values of QCT measurements were recorded under different thicknesses of reconstruction layer and different ROI thicknesses. Then,the effects of the choose of different thicknesses of reconstruction layer and the different ROI thicknesses on BMD values that were measured by QCT were analyzed. Results:The average BMD values of 1 mm and 5 mm thicknesses of reconstruction layer were respectively (117.41±45.97) mg/cm3 and (118.77±44.84) mg/cm3 when ROI thickness was 5 mm,with a statistically significant difference (t=-2.283,P<0.05). The average BMD values of 1 mm and 5 mm thicknesses of reconstruction layer were respectively (116.38±46.06) mg/cm3 and (119.06±44.55) mg/cm3 when the ROI thickness was 7mm,and the difference was statistically significant (t=-3.280,P<0.05). The average BMD values of 1 mm and 5 mm thicknesses of reconstruction layer were respectively (116.25±45.36) mg/cm3 and (120.12±44.10) mg/cm3 when the ROI thickness was 9 mm,and the difference was statistically significant (t=-5.841,P<0.001). The differences in BMD measurement values among 5,7 and 9 mm ROI thicknesses were not statistically significant when the thicknesses of reconstruction layer were respectively 1 and 5 mm. Conclusion:There is an effect of the thickness of QCT reconstruction layer on average BMD measurement values,and 1 mm thickness of reconstruction layer is more suitable to clinical application,while there is not significant effect in ROI thickness on average BMD measurement value of QCT. In clinical application,it is feasible to adjust ROI thickness according to actual situation so as to avoid the effect caused by some factors such as fracture or vertebral implants.

Objective To observe the correlations of artificial intelligence(AI)measured parameters on anteroposterior and lateral spinal X-ray films with the severity of adolescent idiopathic scoliosis(AIS).Methods Totally 1 786 AIS patients were retrospectively enrolled.Parameters including Cobb angle(CA),coronal balance distance(CBD),T1 slope(T1S),pelvic tilt(PT),sacral slope(SS),apical vertebral translation(AVT),thoracic trunk shift(TTS),thoracic kyphosis(TK)and sagittal vertical axis(SVA)on anteroposterior and lateral spinal X-ray films were measured using uAI DR scoliosis analysis system.The severity of AIS was evaluated according to CA,and the correlations between other parameters and the severity of AIS were explored.The above parameters were compared under different severity levels and coronal/sagittal equilibrium states.Multivariate logistic regression analysis was performed to screen the independent impact factors on the severity of AIS.Results Significant differences of the above parameters were found among different severity levels except for SVA(all P＜0.001).With the aggravation of AIS,CA,CBD,AVT and TTS increased successively(all P＜0.001).T1S of severe AIS was higher than that of mild and moderate AIS(both P＜0.001),PT and SS of moderate and severe AIS were all bigger,while their TK were smaller than those of mild AIS(all P＜0.001).Significant differences of CA,T1S,PT,SS,AVT,TTS and TK were found between coronal balanced and imbalanced AIS(all P＜0.05),while of TK were found between sagittal balanced and unbalanced AIS(P=0.026).CBD,T1S,PT,SS,AVT and TTS were all positively correlated(r,=0.136-0.606,all P＜0.001),while TK was negatively correlated(r,=—0.404,P＜0.001)with the severity of AIS.T1S,AVT and TTS were all independent impact factors of the severity of AIS(all P＜0.001).Conclusion Among AI measured parameters on anteroposterior and lateral spinal X-ray films,CBD,T1S,PT,SS,AVT and TTS were positively correlated,while TK was negatively correlated with the severity of AIS.

Objective:To comprehensively analyze the current research status, hotspots, and development trends in the field of fatigue in maintenance hemodialysis patients both domestically and internationally in order to provide reference for future research directions.Methods:Relevant literature on the fatigue status of maintenance hemodialysis patients from the establishment of the database to the publication before December 30, 2022 was retrieved through CNKI, VIP database, Wanfang database, and Web of ScienceTM core collection database, and visualized using CiteSpace 6.1.R3 for analysis.Results:A total of 152 Chinese articles and 110 English articles were included. Analysis showed that foreign publications were first published in 1996, while domestic publications were first published in 2011, and the number of publications has shown a significant upward trend since 2017. The research focus at home and abroad mainly focuses on the influencing factors and intervention measures of fatigue in dialysis patients. Foreign researchers have paid more attention to the correlation between "depression" emotions and the positive intervention of aerobic exercise. In addition, China is actively exploring traditional Chinese medicine therapy aromatherapy to alleviate patient fatigue.Conclusions:In the future, clinical workers should pay attention to fatigue assessment in maintenance hemodialysis patients and explore the influencing factors of fatigue through large-scale longitudinal studies, in order to better provide intervention targets for the treatment of fatigue; Simultaneously conduct high-quality prospective intervention studies to maximize the improvement of fatigue status in such patients and form standardized guidelines for promotion and application.