Objective To investigate the biomechanical characteristics of Salto Talaris tibial components with different heights at the bone-prosthesis interface during different gait support phases after total ankle replacement.Methods An ankle joint model was reconstructed using a weight-bearing CT from a 61-year-old female patient with ankle arthritis,and Salto Talaris tibial components with different heights(5,7,9,11 mm)were modelled to simulate the loading of the tibial-prosthesis during four gait support phases,and to analyse the micromotion and stresses at the bone-prosthesis interface.Results The 11 mm and 9 mm models had a poorer prosthesis stability,with the peak micromotion exceeding 50 μm and the peak internal tibial stresses of 30.75 MPa and 29.86 MPa,respectively,which exceeded the yield stress of the cancellous bone.The tibial stresses of the 7 mm and 5 mm models were within reasonable ranges and the average peak micromotions were only 42.66 μm and 40.32 μm.In contrast,the initial stability of the 5 mm model prosthesis was the best.Conclusions For total ankle replacement with Salto prosthesis,the height of the tibial component should be chosen appropriately,and the optimal height was about 5 mm.Excessive flexion and extension activities of the ankle joint should be avoided to maintain the stability of the prosthesis after surgery.This study provides a theoretical basis for the improvement of the structural parameters of the Salto prosthesis,which is valuable for the selection of clinical surgical prostheses and helps to improve the results of total ankle replacement.

Objective To evaluate the efficacy and safety of a novel intravascular lithotripsy(IVL)balloon—Vesscrack shockwave balloon—for vascular preparation before stent implantation in patients with severe coronary artery calcification(CAC).Methods This was a prospective,single-arm,multicenter study conducted in China from June 2022 to October 2022.Patients with severe CAC were treated with the Vesscrack shockwave balloon for lesion preparation,followed by drug-eluting stent(DES)implantation.Of these,33 patients underwent optical coherence tomography(OCT).The primary endpoint was procedural success,defined as successful stent implantation with residual stenosis≤30％and the absence of in-hospital major adverse events,including cardiac death,target vessel-related myocardial infarction,or target lesion revascularization.Results A total of 170 patients[mean age:(65.9±7.9)years,116 males]were enrolled.After treatment with IVL and DES,the minimum lumen diameter increased significantly compared to baseline[(2.34±0.40)mm vs.(0.95±0.33)mm,P＜0.001],the degree of stenosis was significantly reduced[(13.24±6.60)％vs.(65.18±10.59)％,P＜0.001].Procedural success was achieved in 100％of cases,and device success was 98.8％.The 30-day patient-related cardiovascular clinical composite endpoint(POCE)rate was 0.0,with no target lesion failure,no confirmed or potential thrombotic events were observed.The shockwave energy generator demonstrated excellent stability and ease of use.Among the 33 patients assessed with OCT,after IVL intervention,the maximum calcified area of the lumen[(3.51±1.51)mm2 vs.(2.85±1.80)mm2,P＜0.001],and the minimum lumen area within the target lesion[(3.08±1.04)mm2 vs.(2.02±0.75)mm2,P＜0.001],and after DES intervention,the luminal area of the largest calcified site[(6.59±1.64)mm2 vs.(2.85±1.80)mm2,P＜0.001]and the minimum luminal area within the target lesion[(6.19±1.45)mm2 vs.(2.02±0.75)mm2,P＜0.001]were significantly increased,and the differences were statistically significant.Conclusions The Vesscrack shockwave balloon is effective and safe for vascular preparation in patients with severe CAC prior to stent implantation.It achieves significant calcified plaque modification,high procedural success rates,and minimal complications.

Objective To investigate the biomechanical characteristics of Salto Talaris tibial components with different heights at the bone-prosthesis interface during different gait support phases after total ankle replacement.Methods An ankle joint model was reconstructed using a weight-bearing CT from a 61-year-old female patient with ankle arthritis,and Salto Talaris tibial components with different heights(5,7,9,11 mm)were modelled to simulate the loading of the tibial-prosthesis during four gait support phases,and to analyse the micromotion and stresses at the bone-prosthesis interface.Results The 11 mm and 9 mm models had a poorer prosthesis stability,with the peak micromotion exceeding 50 μm and the peak internal tibial stresses of 30.75 MPa and 29.86 MPa,respectively,which exceeded the yield stress of the cancellous bone.The tibial stresses of the 7 mm and 5 mm models were within reasonable ranges and the average peak micromotions were only 42.66 μm and 40.32 μm.In contrast,the initial stability of the 5 mm model prosthesis was the best.Conclusions For total ankle replacement with Salto prosthesis,the height of the tibial component should be chosen appropriately,and the optimal height was about 5 mm.Excessive flexion and extension activities of the ankle joint should be avoided to maintain the stability of the prosthesis after surgery.This study provides a theoretical basis for the improvement of the structural parameters of the Salto prosthesis,which is valuable for the selection of clinical surgical prostheses and helps to improve the results of total ankle replacement.

Objective To design a shared appointment pool system to realize shared appointment resources for on-line and off-line ways based on data synchronization and information sharing.Methods The system was designed with Internet Plus on-line and off-line intelligent medical appointment platform,which used Oracle 11g database for data storage and the front-end server and data center server for data exchange.PowerBuilder language and Java language were used for the development of the system,and there were five functional modules included in the system for appointment resource definition,appointment resource generation,appointment resource distribution,appointment list adjustment and outpatient consultation arrangement.Results The system developed contributed to unified managment of on-line and off-line appointment resources,and could be used for tracing,summarization and analysis of appointment resources.Conclusion The system developed realizes the synch-ronization of multi-way consultation data and the maximum sharing of appointment resources under the background of smart healthcare,which is of conducive for improving the utilization rate of medical resources.[Chinese Medical Equipment Journal,2025,46(3):42-47]

China has become the country with the highest global burden of heart failure(HF).Despite the widespread use of prognostic-improving medications today,the mortality rate of HF remains high,reaching 13.7％at one year-particularly among patients with heart failure with reduced ejection fraction(HFrEF).HF interventional device therapy(structural intervention)targets the structural factors underlying HF,including atrial pressure,ventricular remodeling,and valvular intervention.It leverages the heart's intrinsic physiological properties and pathological progression mechanisms to deliver treatments through interventions without external active forces,achieving anatomical or functional repair.This field has emerged as a rapidly growing area and plays an increasingly critical role in HF management.This article provides a comprehensive review and summary of the latest advancements in HF and cardiomyopathy interventional therapy over the past year.It covers various novel technologies and products currently in the research phase,aiming to provide an in-depth analysis of the current status and future directions of HF interventional therapy,and further advance the development of this discipline.

This study investigated the drug resistance and genetic relationships among strains co-existing in animals,the environ-ment,and the living quarters of employees at large-scale pig farms in certain regions of Shandong Province,to provide a scientific ba-sis for elucidating the transmission mechanisms of drug-resistant bacteria through bacterial traceability analysis.Samples were col-lected from two pig farms,and bacteria were isolated and purified.The species of the isolated strains were identified via 16S rRNA gene sequencing.Antimicrobial susceptibility testing was conducted with a VITEK-2 Compact system and the disk diffusion method for strains present in pigs,the environment,and living areas.Furthermore,whole-genome sequencing was performed on the Illumina Miniseq platform to annotate drug resistance genes,and multilocus sequence typing(MLST)and core genome single nucleotide poly-morphism(cgSNP)analyses were used to trace the resistant strains.Three species—Staphylococcus aureus,Pseudomonas aeruginosa,and Bacillus cereus—were isolated and cultured from animals,the environment,and employee living areas,and their distributions were analyzed.These strains exhibited diverse drug resistance spectra and genetic diversity.Additionally,the strains displayed highly consistent resistance profiles,resistance genes,ST types,and SNP loci in pig urine,soil both inside and outside the facility,human drinking water,and the cafeteria and dormitories.Our findings indicated a potential risk of transmission of opportunistic pathogens be-tween the pig farming area and the living quarters.Particular attention should be paid to the environmental transmission of methicillin-resistant Staphylococcus aureus.

China has become the country with the highest global burden of heart failure(HF).Despite the widespread use of prognostic-improving medications today,the mortality rate of HF remains high,reaching 13.7％at one year-particularly among patients with heart failure with reduced ejection fraction(HFrEF).HF interventional device therapy(structural intervention)targets the structural factors underlying HF,including atrial pressure,ventricular remodeling,and valvular intervention.It leverages the heart's intrinsic physiological properties and pathological progression mechanisms to deliver treatments through interventions without external active forces,achieving anatomical or functional repair.This field has emerged as a rapidly growing area and plays an increasingly critical role in HF management.This article provides a comprehensive review and summary of the latest advancements in HF and cardiomyopathy interventional therapy over the past year.It covers various novel technologies and products currently in the research phase,aiming to provide an in-depth analysis of the current status and future directions of HF interventional therapy,and further advance the development of this discipline.

Objective To design a shared appointment pool system to realize shared appointment resources for on-line and off-line ways based on data synchronization and information sharing.Methods The system was designed with Internet Plus on-line and off-line intelligent medical appointment platform,which used Oracle 11g database for data storage and the front-end server and data center server for data exchange.PowerBuilder language and Java language were used for the development of the system,and there were five functional modules included in the system for appointment resource definition,appointment resource generation,appointment resource distribution,appointment list adjustment and outpatient consultation arrangement.Results The system developed contributed to unified managment of on-line and off-line appointment resources,and could be used for tracing,summarization and analysis of appointment resources.Conclusion The system developed realizes the synch-ronization of multi-way consultation data and the maximum sharing of appointment resources under the background of smart healthcare,which is of conducive for improving the utilization rate of medical resources.[Chinese Medical Equipment Journal,2025,46(3):42-47]

This study investigated the drug resistance and genetic relationships among strains co-existing in animals,the environ-ment,and the living quarters of employees at large-scale pig farms in certain regions of Shandong Province,to provide a scientific ba-sis for elucidating the transmission mechanisms of drug-resistant bacteria through bacterial traceability analysis.Samples were col-lected from two pig farms,and bacteria were isolated and purified.The species of the isolated strains were identified via 16S rRNA gene sequencing.Antimicrobial susceptibility testing was conducted with a VITEK-2 Compact system and the disk diffusion method for strains present in pigs,the environment,and living areas.Furthermore,whole-genome sequencing was performed on the Illumina Miniseq platform to annotate drug resistance genes,and multilocus sequence typing(MLST)and core genome single nucleotide poly-morphism(cgSNP)analyses were used to trace the resistant strains.Three species—Staphylococcus aureus,Pseudomonas aeruginosa,and Bacillus cereus—were isolated and cultured from animals,the environment,and employee living areas,and their distributions were analyzed.These strains exhibited diverse drug resistance spectra and genetic diversity.Additionally,the strains displayed highly consistent resistance profiles,resistance genes,ST types,and SNP loci in pig urine,soil both inside and outside the facility,human drinking water,and the cafeteria and dormitories.Our findings indicated a potential risk of transmission of opportunistic pathogens be-tween the pig farming area and the living quarters.Particular attention should be paid to the environmental transmission of methicillin-resistant Staphylococcus aureus.

Objective To evaluate the efficacy and safety of a novel intravascular lithotripsy(IVL)balloon—Vesscrack shockwave balloon—for vascular preparation before stent implantation in patients with severe coronary artery calcification(CAC).Methods This was a prospective,single-arm,multicenter study conducted in China from June 2022 to October 2022.Patients with severe CAC were treated with the Vesscrack shockwave balloon for lesion preparation,followed by drug-eluting stent(DES)implantation.Of these,33 patients underwent optical coherence tomography(OCT).The primary endpoint was procedural success,defined as successful stent implantation with residual stenosis≤30％and the absence of in-hospital major adverse events,including cardiac death,target vessel-related myocardial infarction,or target lesion revascularization.Results A total of 170 patients[mean age:(65.9±7.9)years,116 males]were enrolled.After treatment with IVL and DES,the minimum lumen diameter increased significantly compared to baseline[(2.34±0.40)mm vs.(0.95±0.33)mm,P＜0.001],the degree of stenosis was significantly reduced[(13.24±6.60)％vs.(65.18±10.59)％,P＜0.001].Procedural success was achieved in 100％of cases,and device success was 98.8％.The 30-day patient-related cardiovascular clinical composite endpoint(POCE)rate was 0.0,with no target lesion failure,no confirmed or potential thrombotic events were observed.The shockwave energy generator demonstrated excellent stability and ease of use.Among the 33 patients assessed with OCT,after IVL intervention,the maximum calcified area of the lumen[(3.51±1.51)mm2 vs.(2.85±1.80)mm2,P＜0.001],and the minimum lumen area within the target lesion[(3.08±1.04)mm2 vs.(2.02±0.75)mm2,P＜0.001],and after DES intervention,the luminal area of the largest calcified site[(6.59±1.64)mm2 vs.(2.85±1.80)mm2,P＜0.001]and the minimum luminal area within the target lesion[(6.19±1.45)mm2 vs.(2.02±0.75)mm2,P＜0.001]were significantly increased,and the differences were statistically significant.Conclusions The Vesscrack shockwave balloon is effective and safe for vascular preparation in patients with severe CAC prior to stent implantation.It achieves significant calcified plaque modification,high procedural success rates,and minimal complications.