Cervical spinal cord injury without fracture-dislocation (CSCIWFD) is referred to as a special type of cervical spinal cord injury characterized by traumatic spinal cord dysfunction and no significant bony structural abnormalities on imagines. Duo to the high risk of missed diagnosis during the initial consultation, CSCIWFD may lead to progressive neurological deterioration or even complete paralysis, severely impacting patients′ prognosis. Currently, there are no established consensuses over the diagnosis and treatment of CSCIWFD, such as the lack of evidence-based standards for indications of non-surgical treatment and risk of secondary neurological injury, as well as debates over the optimal timing for surgical intervention and indications for different surgical approaches. To address these issues, the Spine Trauma Group of the Orthopedic Branch of the Chinese Medical Doctor Association organized experts in the relevant fields to formulate Diagnosis and treatment guideline for acute cervical spinal cord injury without fracture- dislocation in adults ( version 2025) . Based on evidence-based medicine and the principles of scientific rigor and clinical applicability, the guidelines proposed 11 recommendations covering terminology, diagnosis, evaluation treatment, and rehabilitation, etc., aiming to standardize the management of CSCIWFD.

Vertebral refracture following percutaneous vertebral augmentation (PVA) is commonly seen in elderly patients with osteoporotic thoracolumbar compression fractures (OTLCF). It can lead to recurrent pain, loss of vertebral height, progression of kyphosis, and even neurological dysfunction, significantly impairing patients′ quality of life. Current diagnosis and treatment face multiple challenges, including high misdiagnosis rate, difficulty in choosing between surgical and non-surgical treatment options, lack of standardized surgical protocols, interference from intralesional bone cement during procedures, inadequate stability of internal fixation in osteoporotic bone, and suboptimal compliance of anti-osteoporotic therapy. Establishing a standardized diagnostic and therapeutic framework is urgently needed. To standardize the management process and improve outcomes for vertebral refractures after PVA in elderly OTLCF patients, Spinal Trauma Group of the Orthopedic Branch of Chinese Medical Doctor Association organized experts in the field to develop Guideline for the diagnosis and treatment of vertebral refracture after percutaneous vertebral augmentation in elderly patients with osteoporotic thoracolumbar compression fractures ( version 2025), based on current literature and clinical experience, and adhering to principles of scientific rigor and clinical applicability. A total of 11 recommendations were proposed, encompassing diagnosis, treatment, and rehabilitation of vertebral refracture after PVA in elderly patients with OTLCF, aiming to provide a foundation for a standardized management.

Objective To investigate the biomechanical characteristics of Salto Talaris tibial components with different heights at the bone-prosthesis interface during different gait support phases after total ankle replacement.Methods An ankle joint model was reconstructed using a weight-bearing CT from a 61-year-old female patient with ankle arthritis,and Salto Talaris tibial components with different heights(5,7,9,11 mm)were modelled to simulate the loading of the tibial-prosthesis during four gait support phases,and to analyse the micromotion and stresses at the bone-prosthesis interface.Results The 11 mm and 9 mm models had a poorer prosthesis stability,with the peak micromotion exceeding 50 μm and the peak internal tibial stresses of 30.75 MPa and 29.86 MPa,respectively,which exceeded the yield stress of the cancellous bone.The tibial stresses of the 7 mm and 5 mm models were within reasonable ranges and the average peak micromotions were only 42.66 μm and 40.32 μm.In contrast,the initial stability of the 5 mm model prosthesis was the best.Conclusions For total ankle replacement with Salto prosthesis,the height of the tibial component should be chosen appropriately,and the optimal height was about 5 mm.Excessive flexion and extension activities of the ankle joint should be avoided to maintain the stability of the prosthesis after surgery.This study provides a theoretical basis for the improvement of the structural parameters of the Salto prosthesis,which is valuable for the selection of clinical surgical prostheses and helps to improve the results of total ankle replacement.

Objective To investigate the biomechanical characteristics of Salto Talaris tibial components with different heights at the bone-prosthesis interface during different gait support phases after total ankle replacement.Methods An ankle joint model was reconstructed using a weight-bearing CT from a 61-year-old female patient with ankle arthritis,and Salto Talaris tibial components with different heights(5,7,9,11 mm)were modelled to simulate the loading of the tibial-prosthesis during four gait support phases,and to analyse the micromotion and stresses at the bone-prosthesis interface.Results The 11 mm and 9 mm models had a poorer prosthesis stability,with the peak micromotion exceeding 50 μm and the peak internal tibial stresses of 30.75 MPa and 29.86 MPa,respectively,which exceeded the yield stress of the cancellous bone.The tibial stresses of the 7 mm and 5 mm models were within reasonable ranges and the average peak micromotions were only 42.66 μm and 40.32 μm.In contrast,the initial stability of the 5 mm model prosthesis was the best.Conclusions For total ankle replacement with Salto prosthesis,the height of the tibial component should be chosen appropriately,and the optimal height was about 5 mm.Excessive flexion and extension activities of the ankle joint should be avoided to maintain the stability of the prosthesis after surgery.This study provides a theoretical basis for the improvement of the structural parameters of the Salto prosthesis,which is valuable for the selection of clinical surgical prostheses and helps to improve the results of total ankle replacement.

Cervical spinal cord injury without fracture-dislocation (CSCIWFD) is referred to as a special type of cervical spinal cord injury characterized by traumatic spinal cord dysfunction and no significant bony structural abnormalities on imagines. Duo to the high risk of missed diagnosis during the initial consultation, CSCIWFD may lead to progressive neurological deterioration or even complete paralysis, severely impacting patients′ prognosis. Currently, there are no established consensuses over the diagnosis and treatment of CSCIWFD, such as the lack of evidence-based standards for indications of non-surgical treatment and risk of secondary neurological injury, as well as debates over the optimal timing for surgical intervention and indications for different surgical approaches. To address these issues, the Spine Trauma Group of the Orthopedic Branch of the Chinese Medical Doctor Association organized experts in the relevant fields to formulate Diagnosis and treatment guideline for acute cervical spinal cord injury without fracture- dislocation in adults ( version 2025) . Based on evidence-based medicine and the principles of scientific rigor and clinical applicability, the guidelines proposed 11 recommendations covering terminology, diagnosis, evaluation treatment, and rehabilitation, etc., aiming to standardize the management of CSCIWFD.

Vertebral refracture following percutaneous vertebral augmentation (PVA) is commonly seen in elderly patients with osteoporotic thoracolumbar compression fractures (OTLCF). It can lead to recurrent pain, loss of vertebral height, progression of kyphosis, and even neurological dysfunction, significantly impairing patients′ quality of life. Current diagnosis and treatment face multiple challenges, including high misdiagnosis rate, difficulty in choosing between surgical and non-surgical treatment options, lack of standardized surgical protocols, interference from intralesional bone cement during procedures, inadequate stability of internal fixation in osteoporotic bone, and suboptimal compliance of anti-osteoporotic therapy. Establishing a standardized diagnostic and therapeutic framework is urgently needed. To standardize the management process and improve outcomes for vertebral refractures after PVA in elderly OTLCF patients, Spinal Trauma Group of the Orthopedic Branch of Chinese Medical Doctor Association organized experts in the field to develop Guideline for the diagnosis and treatment of vertebral refracture after percutaneous vertebral augmentation in elderly patients with osteoporotic thoracolumbar compression fractures ( version 2025), based on current literature and clinical experience, and adhering to principles of scientific rigor and clinical applicability. A total of 11 recommendations were proposed, encompassing diagnosis, treatment, and rehabilitation of vertebral refracture after PVA in elderly patients with OTLCF, aiming to provide a foundation for a standardized management.

Background Ultrasound-guided continuous thoracic paravertebral block can provide pain-relieving and opioid-sparing effects in patients receiving open hepatectomy. We hypothesize that these effects may improve the quality of recovery (QoR) after open hepatectomy. Methods Seventy-six patients undergoing open hepatectomy were randomized to receive a continuous thoracic paravertebral block with ropivacaine (CTPVB group) or normal saline (control group). All patients received patient-controlled intravenous analgesia with morphine postoperatively for 48 hours. The primary outcome was the global Chinese 15-item Quality of Recovery score on postoperative day 7, which was statistically analyzed using Student's t-test. Results Thirty-six patients in the CTPVB group and 37 in the control group completed the study. Compared to the control group, the CTPVB group had significantly increased global Chinese 15-item Quality of Recovery scores (133.14 ± 12.97 vs. 122.62 ± 14.89, P = 0.002) on postoperative day 7. Postoperative pain scores and cumulative morphine consumption were significantly lower for up to 8 and 48 hours (P < 0.05; P = 0.002), respectively, in the CTPVB group. Conclusion Perioperative CTPVB markably promotes patient's QoR after open hepatectomy with a profound analgesic effect in the early postoperative period.
Anesthetics, Local/therapeutic use* ; Double-Blind Method ; Hepatectomy/adverse effects* ; Humans ; Morphine/therapeutic use* ; Pain Measurement ; Pain, Postoperative/etiology* ; Ultrasonography, Interventional

Trimethylamine N-oxide (TMAO), a metabolite of intestinal flora, can promote Atherosclerosis (AS) in various ways. Current studies have found that it has a close relationship with plaque stability in clinical practice, but its molecular mechanism remains unclear at present. Extracellular matrix metalloproteinase inducers (CD147) / matrix metalloproteinases (MMPs) regulate a signal pathway highly related to plaque stability, which can promote plaque instability and lead to cardiovascular adverse events by weakening the thickness of the fibrous cap. Therefore, in this study, the mouse macrophageRAW264. 7 was stimulated by TMAO to establish a cell model to observe the effects on CD147, MMP2, and MMP9, and the CD147 gene silencing model was further constructed by using the siRNA transfection method to explore the interaction between CD147 and MMP2 and MMP9. Rt-qPCR and Western blotting results showed that there was no significant change in the gene expression level of CD147 in mouse macrophage RAW264. 7, but significantly increased in protein levels (P < 0. 05), while MMP2 andMMP9 were increased in mRNA and protein levels (P<0. 05). The expression of CD147, MMP2, andMMP9 was significantly inhibited in CD147 siRNA transfected cells (P<0. 05). In conclusion, TMAO significantly increases the expression of MMP2 and MMP9 in mouse macrophages RAW264. 7, and this effect may be partially realized through the CD147/ MMP pathway.

In order to explore the effect of different drying methods(drying-in-the-shade, sun-drying, and hot air drying) on appearance characteristics, internal structure and composition of Belamcandae Rhizoma, so as to provide a theoretical basis for screening out suitable drying methods for primary processing. In this study, the Belamcandae Rhizoma's dynamic changes of the moisture content ratio and drying rate with different drying time under different drying methods, as well as the effects of different drying methods on the appearance, drying rate, density, ash, extractives and the contents of six flavonoids(mangiferin, tectoridin, iridin, tectorigenin, irigenin, irisflorentin) were compared. The results showed that fresh Belamcandae Rhizoma consumed the longest time to reach the water balance point by traditional dry drying in the shade, whiche was about 311 h; that by sun drying was 19.3%, which was shorter than drying in the shade; both drying curves were smoother. The section color of the sun drying samples was the closest to that of fresh samples, but the interior is full of holes, with a low density and loose structure. Hot air drying(40, 60, 80 ℃) could save about 27% to 88% of the drying time, which was greatly shorter, with less pores, a larger density and compact structure. Compared with the traditional drying method, the drying rate of hot air drying was reduced by 13.7%. Ash was affected by temperature, the drying conditions under 40 ℃ and below were not significantly different from those of conventional drying. The ash content decreased by 7.73% to 18.5% compared with conventional drying at 60,80 ℃. After conventional drying and 40 ℃ hot air drying, the contents of tectoridin and iridin(glycosides) in the samples were significantly higher than those in 60,80 ℃ hot air drying, while the contents of tectorigenin, irigenin and irisflorentin(aglycones) dried at 60 ℃ were the best. Therefore, considering comprehensive appearance characteristics and content of medicinal ingredients, traditional Chinese medicinal materials after 60 ℃ hot air drying show a solid texture, tight internal structure, good appearance, appropriate reduction of toxic parasides and higher aglycone content.
Desiccation ; Drugs, Chinese Herbal ; Rhizome

The research on endophytes of medicinal plants mainly relies on the traditional culture and isolation methods. Because of their functions such as promoting host growth, improving stress resistance, promoting the accumulation of medicinal active ingredients or directly producing medicinal active ingredients, the endophytes of medicinal plants have gradually attracted wide attention. However, it was found that the strains isolated by traditional methods were not the true dominant endophytes of medicinal plants by comparing the results of traditional culture isolation with high-throughput sequencing. The blind and random nature of traditional methods leads to the lack of standards in terms of medium selection, culture time and interaction between species. On the contrary, high-throughput sequencing technology is an emerging molecular biology technology developed in recent decades. Due to its high resolution level and indepen-dent culture, it can be used for thorough analysis of the community structure and diversity of environmental microorganisms. Therefore, we proposed the strategy of using high-throughput sequencing technology to guide the traditional culture and isolation of endophytes from medicinal plants. Firstly, the endophytic structure and diversity of medicinal plants were completely clear by high-throughput sequencing technology, and the dominant endophytes of the host were unequivocal. Then according to the characteristics of each dominant endophytes design or query suitable medium for its growth to culture and isolation. Finally, the function of the isolates was studied. This method can prevent researchers from missing out on the important functional strains of the host, expand the research scope of endophytes of medicinal plants, and facilitate the in-depth excavation and utilization of endophytes of medicinal plants.
Endophytes/genetics* ; High-Throughput Nucleotide Sequencing ; Plants, Medicinal ; Research Design