Objective:To observe the early clinical efficacy of 3D-printed modular supporting prosthesis for reconstruction of lacunar bone defect caused by giant cell tumor of the distal femur.Methods:From May 2018 to July 2023, a total of 9 patients with giant cell tumor of the distal femur were treated with 3D-printed modular supporting prosthesis to reconstruct lacunar bone defects in the Department of Orthopedics, West China Hospital, Sichuan University. There were 4 males and 5 females, aged 30.8±6.1 years (range, 24-44 years), 5 cases on the left side, 4 cases on the right side, 2 cases of Campanacci grade I, 7 cases of Campanacci grade II. The anteroposterior and lateral X-ray films and T-SMART tomosynthesis imaging of the knee joint were taken to observe the bone graft healing and osseointegration after operation. Musculoskeletal Tumor Society (MSTS)-93 was used to evaluate knee function, and visual analogue scale (VAS) was used to evaluate knee pain.Results:All patients were successfully operated and followed up for an average of 30.8±7.5 months (range, 18-42 months). The operation time was 124.2±23.6 min, and the intraoperative blood loss was 105.6±17.4 ml. All autografts showed bony union at the graft-host junction, and the healing time was 3.3±0.4 months (range, 3.0-4.0 months). At 6 months after surgery, T-SMART tomosynthesis imaging showed that the gap between the prosthesis-bone interface was less than 1 mm in all patients. At the last follow-up, the thickness of residual subchondral bone was 5.7±1.3 mm, which was greater than that before operation 2.2±0.8 mm, and the difference was statistically significant ( t=10.823, P<0.001). At the last follow-up, the score of MSTS-93 was 26.7±2.4, which was higher than that before operation 18.8±3.7, and the difference was statistically significant ( t=5.367, P<0.001). At the last follow-up, the range of motion of the knee joint was 122.8°±9.1°, which was higher than that before operation 108.3°±6.1°, and the difference was statistically significant ( t=3.970, P<0.001). All patients were able to walk normally, go up and down stairs and other daily activities, and 7 patients were able to complete squats. At the last follow-up, there was no local tumor recurrence, distant metastasis, death, joint infection, pain (VAS score was 0), delayed wound healing, joint degeneration, prosthesis loosening or articular surface collapse. Conclusion:Reconstruction of lacunar bone defect caused by giant cell tumor of distal femur with 3D-printed modular supporting prosthesis can effectively improve knee joint function and osseointegration, and the short-term clinical results are satisfactory.

Traditional Chinese medicine (TCM) is a well-accepted therapy for atopic dermatitis (AD). However, there are currently no evidence-based guidelines integrating TCM and Western medicine for the treatment of AD, limiting the clinical application of such combined approaches. Therefore, the China Association of Chinese Medicine initiated the development of the current guideline, focusing on key issues related to the use of TCM in the treatment of AD. This guideline was developed in accordance with the principles of the guideline formulation manual published by the World Health Organization. A comprehensive review of the literature on the combined use of TCM and Western medicine to treat AD was conducted. The findings were extensively discussed by experts in dermatology and pharmacy with expertise in both TCM and Western medicine. This guideline comprises 23 recommendations across seven major areas, including TCM syndrome differentiation and classification of AD, principles and application scenarios of TCM combined with Western medicine for treating AD, outcome indicators for evaluating clinical efficacy of AD treatment, integration of TCM pattern classification and Western medicine across disease stages, daily management of AD, the use of internal TCM therapies and proprietary Chinese medicines, and TCM external treatments. Please cite this article as: Du XR, Wu MY, Tao MC, Lin Y, Gu CY, Wu MF, Cao Y, Chen DC, Li W, Wang HW, Wang Y, Wang Y, Lu HZ, Liu X, Su XF, Li FL. Clinical practice guidelines for the diagnosis and treatment of atopic dermatitis with integrative traditional Chinese and Western medicine. J Integr Med. 2025; 23(6):641-653.
Dermatitis, Atopic/drug therapy* ; Humans ; Medicine, Chinese Traditional/methods* ; Integrative Medicine ; Drugs, Chinese Herbal/therapeutic use* ; Practice Guidelines as Topic

This study was analyzed the spatial-temporal distribution and aggregation characteristics of Yersinia pestispositive host animals and vector pathogens in marmot natural foci in the Qilian-Altun mountains,Gansu Province,to provide a scientific basis for precise plague prevention and control.Y.pestissurveillance data for marmot natural foci in Qilian-Altun Mountains of Gansu Province from 2014 to 2023 were obtained from the Disease Control and Prevention Center of Gansu Province.Origin 2024 software was used for data visualization and presentation.Global and local spatial autocorrelation analyses and trend analyses were conducted in ArcGIS 10.8 software,with townships as the spatial scale.Cumulatively,440 strains of Y.pestis were isolated from the natural marmot foci in the Qilian-Altun mountainsof Gansu Province from 2014 to 2023.Most strains was isolated from marmots(345 strains,78.41%),and the remainder were isolated from vectors.Temporal distribution analysis indicated that the highest number of detected bacteria was reported in July and August(both 121 strains,27.50%).Regional distribution analysis revealed that Aksai County reported the highest number of detected bacteria(255 strains,57.95%).Global spatial autocorrelation analysis showed a spatially clustered distribution of the number of bacteria detected annually in the townships containing natural foci,except in2014,2016,and 2021-2023.The strongest spatial clustering was observed in 2020(Moran's I=0.521 2,Z=14.397 0,P<0.001).Local spatial autocorrelation analysis indicated a"high-high"aggregation area in the natural foci every year from 2014 to 2023,primarily in Hongliuwan Town of Aksai County and Dangchengwan Town of Subei County.The distribution of the"low-low"aggregation area was essentially consistent with the low activity area of the Yersinia pestisepidemic.The trend in annual total bacterial count gradually increased from east to west,and peaked in the western part of the epidemic focus.Clear spatial aggregation characteristics of the number of Y.pestis were detected in the marmot natural foci in the Qilian-Altun mountains at the townshiplevel as a whole in Gansu Province from 2014 to 2023.The aggregation area was mainly in the western section of Qilian Mountain to the Altun mountain section of the epidemic source area.Monitoring and prevention and control efforts should be focused in this key area,with prevention and control measures tailored to the local conditions,and classified guidance to decrease the risk of plague occurrence and spread.

This study was analyzed the spatial-temporal distribution and aggregation characteristics of Yersinia pestispositive host animals and vector pathogens in marmot natural foci in the Qilian-Altun mountains,Gansu Province,to provide a scientific basis for precise plague prevention and control.Y.pestissurveillance data for marmot natural foci in Qilian-Altun Mountains of Gansu Province from 2014 to 2023 were obtained from the Disease Control and Prevention Center of Gansu Province.Origin 2024 software was used for data visualization and presentation.Global and local spatial autocorrelation analyses and trend analyses were conducted in ArcGIS 10.8 software,with townships as the spatial scale.Cumulatively,440 strains of Y.pestis were isolated from the natural marmot foci in the Qilian-Altun mountainsof Gansu Province from 2014 to 2023.Most strains was isolated from marmots(345 strains,78.41%),and the remainder were isolated from vectors.Temporal distribution analysis indicated that the highest number of detected bacteria was reported in July and August(both 121 strains,27.50%).Regional distribution analysis revealed that Aksai County reported the highest number of detected bacteria(255 strains,57.95%).Global spatial autocorrelation analysis showed a spatially clustered distribution of the number of bacteria detected annually in the townships containing natural foci,except in2014,2016,and 2021-2023.The strongest spatial clustering was observed in 2020(Moran's I=0.521 2,Z=14.397 0,P<0.001).Local spatial autocorrelation analysis indicated a"high-high"aggregation area in the natural foci every year from 2014 to 2023,primarily in Hongliuwan Town of Aksai County and Dangchengwan Town of Subei County.The distribution of the"low-low"aggregation area was essentially consistent with the low activity area of the Yersinia pestisepidemic.The trend in annual total bacterial count gradually increased from east to west,and peaked in the western part of the epidemic focus.Clear spatial aggregation characteristics of the number of Y.pestis were detected in the marmot natural foci in the Qilian-Altun mountains at the townshiplevel as a whole in Gansu Province from 2014 to 2023.The aggregation area was mainly in the western section of Qilian Mountain to the Altun mountain section of the epidemic source area.Monitoring and prevention and control efforts should be focused in this key area,with prevention and control measures tailored to the local conditions,and classified guidance to decrease the risk of plague occurrence and spread.

Objective:To observe the early clinical efficacy of 3D-printed modular supporting prosthesis for reconstruction of lacunar bone defect caused by giant cell tumor of the distal femur.Methods:From May 2018 to July 2023, a total of 9 patients with giant cell tumor of the distal femur were treated with 3D-printed modular supporting prosthesis to reconstruct lacunar bone defects in the Department of Orthopedics, West China Hospital, Sichuan University. There were 4 males and 5 females, aged 30.8±6.1 years (range, 24-44 years), 5 cases on the left side, 4 cases on the right side, 2 cases of Campanacci grade I, 7 cases of Campanacci grade II. The anteroposterior and lateral X-ray films and T-SMART tomosynthesis imaging of the knee joint were taken to observe the bone graft healing and osseointegration after operation. Musculoskeletal Tumor Society (MSTS)-93 was used to evaluate knee function, and visual analogue scale (VAS) was used to evaluate knee pain.Results:All patients were successfully operated and followed up for an average of 30.8±7.5 months (range, 18-42 months). The operation time was 124.2±23.6 min, and the intraoperative blood loss was 105.6±17.4 ml. All autografts showed bony union at the graft-host junction, and the healing time was 3.3±0.4 months (range, 3.0-4.0 months). At 6 months after surgery, T-SMART tomosynthesis imaging showed that the gap between the prosthesis-bone interface was less than 1 mm in all patients. At the last follow-up, the thickness of residual subchondral bone was 5.7±1.3 mm, which was greater than that before operation 2.2±0.8 mm, and the difference was statistically significant ( t=10.823, P<0.001). At the last follow-up, the score of MSTS-93 was 26.7±2.4, which was higher than that before operation 18.8±3.7, and the difference was statistically significant ( t=5.367, P<0.001). At the last follow-up, the range of motion of the knee joint was 122.8°±9.1°, which was higher than that before operation 108.3°±6.1°, and the difference was statistically significant ( t=3.970, P<0.001). All patients were able to walk normally, go up and down stairs and other daily activities, and 7 patients were able to complete squats. At the last follow-up, there was no local tumor recurrence, distant metastasis, death, joint infection, pain (VAS score was 0), delayed wound healing, joint degeneration, prosthesis loosening or articular surface collapse. Conclusion:Reconstruction of lacunar bone defect caused by giant cell tumor of distal femur with 3D-printed modular supporting prosthesis can effectively improve knee joint function and osseointegration, and the short-term clinical results are satisfactory.

Objective To compare the dosimetric effects of volume modulated arc therapy(VMAT)and intensity modulated radiation therapy(I M RT)on the anal sphincter(AS)and its sub-structures in neoadjuvant radiotherapy for rectal cancer to facilitate the selection of radiotherapy techniques.Methods Fifty rectal cancer patients receiving neoadjuvant radiotherapy were selected,and 2 types of radiotherapy plans,including coplanar double full-arc VMAT and coplanar seven-field homo-geneous IMRT,were designed based on the CT images of the patients,respectively.Under the premise of ensuring that the irradiated doses to the target area and the major organs at risk reached the standard and met the clinical requirements,AS and its substructures were added as the organs at risk for dosimetric evaluation.The absolute dose parameters and relative dose parameters of AS and its substructures were counted by dose-volume histograms.Statistical analysis was performed using IBM SPSS 22.0 software.Results The VMAT plan had the relative dose parameters V20,V30,and V40 of AS and its substructures lower those of the IMRT plan,the differences were statistically significant(P＜0.05),while the differences in V5 and V 10 were not statistically significant(P＞0.05).The VMAT plan had the absolute dose parameterDmeanlower while the D2％slightly higher than those of the IMRT plan,the differences were statistically significant(P＜0.05).The difference in D98％between the two plans was not statistically significant(P＞0.05).Conclusion During rectal cancer radiotherapy VMAT generally behaves better than IMRT in protecting AS and its sub-structures and decreasing injuries of AS and its sub-structures dosimetrically.[Chinese Medical Equipment Journal,2024,45(8):63-67]

Purpose::The reconstruction of Allen's type IV fingertip amputation is a clinical challenge. Our team designed bilateral unequal-sized hallux osteo-onychocutaneous free flaps for the long-term reconstruction of Allen's type IV fingertip amputation and conducted a retrospective study with a 5-year follow-up aims to evaluate the effects of this technique.Methods::A retrospective analysis with a 5-year follow-up including 13 patients with Allen's type IV fingertip amputation who were admitted to our hospital from January 2010 to January 2017 was conducted. The patients were treated with bilateral unequal-sized hallux osteo-onychocutaneous free flaps. The operation time, intraoperative blood loss, and complications were recorded, and the survival rate of the transplanted flaps was calculated. During the 5-year follow-up after operation, the nail growth time was recorded and the finger appearance was observed. At the last follow-up appointment, the length, width, and girth of the reconstructed fingertip and contralateral normal fingertip, range of motion of the reconstructed fingertip and contralateral normal fingertip, Semmes-Weinstein test (for the evaluation of tactile sensation), and two-point discrimination testing results were recorded. SPSS 22.0 software was used for the statistical analysis and the data are presented as mean ± SD.Results::The mean operation time was (5.62 ± 0.51) h, the mean intraoperative blood loss was (34.15 ± 3.13) mL, and the survival rate of the transplanted flaps was 100%. During the 5-year follow-up, the average nail growth time was (10.14 ± 1.98) months and the average bone union time was (3.78 ± 0.91) months. The length, width, and girth of the reconstructed fingertip were (31.52 ± 3.73) mm, (17.82 ± 1.74) mm, and (59.75 ± 3.04) mm, respectively, which did not differ from those of the contralateral normal fingertip. The range of motion of the reconstructed fingertip was (12.15 ± 2.79) degrees which is different from that of the contralateral normal fingertip. The average tactile sensation evaluated via the Semmes-Weinstein test and the average two-point discrimination test of the reconstructed fingertip were (0.39 ± 0.17) g and (7.46 ± 1.14) mm, respectively, which were not different from those of the contralateral normal fingertip. The average Maryland score of feet in the donor area was 87.66 ± 7.39, which was satisfactory.Conclusion::Bilateral unequal-sized hallux osteo-onychocutaneous free flaps are an effective method to reconstruct Allen's type IV fingertip amputations with a satisfactory appearance and good sensory function.

For the past 30 years,percutaneous balloon mitral valve dilatation has been performed under the guidance of X-rays and bedside ultrasound.However,there are still some cases of mitral valve stenosis in the large atrium where balloon dilation failed.Intraperitoneal ultrasound-guided percutaneous balloon mitral valve plasty is accurate and feasible,which can reduce the occurrence of complications and improve the success rate of such elderly complex cases.Two patients with severe mitral stenosis underwent percutaneous balloon mitral valve plasty guided by intracardiac ultrasound.The operations were successful without any complications,which can provide reference for clinical treatment of mitral stenosis.