In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

Objective:To investigate the influence and mechanism of bone marrow mesenchymal stem cells (BMSCs) overexpressing growth arrest specific 6, i.e. GAS6/BMSCs on full-thickness skin defect wounds in diabetic mice.Methods:This study was an experimental study. Twelve 8-week-old male C57BL/6J mice were divided into a control wound group with only full-thickness skin defects and a diabetic wound group with diabetic full-thickness skin defects according to the random number table method, with 6 mice in each group. The wound healing rates were calculated at 3, 7, 14, and 21 days after injury. At 21 days after injury, wound tissue specimens were collected for hematoxylin-eosin staining to observe the histopathological conditions; Masson staining was performed to detect collagen deposition; immunohistochemical staining was performed to detect the number of proliferating cell nuclear antigen (PCNA)-positive cells and CD31-positive cells, representing cell proliferation and capillary density, respectively; immunofluorescence staining was performed to detect the number of F4/80 and myeloperoxidase (MPO) double-positive cells, indicating efferocytosis. Two 4-week-old male C57BL/6J mice were used to extract BMSCs, and GAS6/BMSCs were constructed through adenovirus transfection and successfully identified. Eighteen 8-week-old male C57BL/6J mice were used to create diabetic full-thickness skin defect wound models and divided into phosphate buffered solution (PBS) group, BMSC group, and GAS6/BMSC group (with 6 mice in each group) according to the random number table method. Immediately after injury, PBS, BMSC single-cell suspension, and GAS6/BMSC single-cell suspension were injected locally into the wounds of the three groups of mice, respectively. The wound healing rates were calculated, and the cell proliferation, capillary density, and efferocytosis were detected at the same time points as the previous experiments.Results:At 3, 7, 14, and 21 days after injury, the wound healing rates of mice in diabetic wound group were significantly lower than those in control wound group (with t values of 7.99, 8.62, 9.80, and 5.85, respectively, P<0.05). Compared with those in control wound group, the wound tissue of mice in diabetic wound group showed the infiltration of a large number of inflammatory cells and reduced collagen deposition at 21 days after injury. At 21 days after injury, the number of PCNA-positive cells and CD31-positive cells in the wound tissue of mice in diabetic wound group were significantly less than that in control wound group (with t values of 6.61 and 5.38, respectively, P<0.05). At 21 days after injury, the number of F4/80 and MPO double-positive cells in the wound tissue of mice in diabetic wound group was 3.3±0.8, which was significantly less than 12.7±1.8 in control wound group ( t=11.00, P<0.05). At 14 and 21 days after injury, the wound healing rates of mice in BMSC group were significantly higher than those in PBS group ( P<0.05); at 3, 7, 14, and 21 days after injury, the wound healing rates of mice in GAS6/BMSC group were significantly higher than those in BMSC group ( P<0.05). At 21 days after injury, the number of PCNA-positive cells in the wound tissue of mice in BMSC group was significantly higher than that in PBS group ( P<0.05), and the number of PCNA-positive cells and CD31-positive cells in the wound tissue of mice in GAS6/BMSC group were significantly higher than that in BMSC group ( P<0.05). At 21 days after injury, the number of F4/80 and MPO double-positive cells in the wound tissue of mice in BMSC group was 4.2±1.2, which was similar to 3.5±1.1 in PBS group ( P>0.05); the number of F4/80 and MPO double-positive cells in the wound tissue of mice in GAS6/BMSC group was 8.2±1.2, which was significantly more than that in BMSC group ( P<0.05). Conclusions:Dysfunctional efferocytosis of macrophage exists in the full-thickness skin defect wounds of diabetic mice, while GAS6/BMSC can promote wound healing by restoring the efferocytosis of macrophages.

Digital technologies have become an integral part of complete denture restoration. With advancement in computer-aided design and computer-aided manufacturing (CAD/CAM), tools such as intraoral scanning, facial scanning, 3D printing, and numerical control machining are reshaping the workflow of complete denture restoration. Unlike conventional methods that rely heavily on clinical experience and manual techniques, digital technologies offer greater precision, predictability, and efficacy. They also streamline the process by reducing the number of patient visits and improving overall comfort. Despite these improvements, the clinical application of digital complete denture restoration still faces challenges that require further standardization. The major issues include appropriate case selection, establishing consistent digital workflows, and evaluating long-term outcomes. To address these challenges and provide clinical guidance for practitioners, this expert consensus outlines the principles, advantages, and limitations of digital complete denture technology. The aim of this review was to offer practical recommendations on indications, clinical procedures and precautions, evaluation metrics, and outcome assessment to support digital restoration of complete denture in clinical practice.
Humans ; Denture, Complete ; Computer-Aided Design ; Denture Design/methods* ; Consensus ; Printing, Three-Dimensional

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

Peroxynitrite anion(ONOO-),which is originated from the reaction of nitric oxide(NO)and superoxide anion(O2-),plays a pivotal role in immune defense and signal regulation.Excessive levels of ONOO-may induce the occurrence of various diseases such as Alzheimer's disease,inflammation,cardiovascular disease and cancer,etc.Existing detection methods for ONOO-have limitations such as complexity,time consumption,and low cell biocompatibility.In this study,a novel fluorescent probe QFPD was developed using quinoline and diphenylphosphinamide as fluorescent keleton and recognition group,respectively.The strong oxidizing property of ONOO-triggerd the cleavage of phosphoramide bond,leading to fluorescence quenching and a visible color change of the solution from yellow to purple,thereby enabling"ON-OFF"type recognition of ONOO-.QFPD exhibited excellent characteristics including good selectivity and high sensitivity in fluorescence detection(Limit of detection of 1.37 μmol/L),large Stokes shift(130 nm),rapid response(10 min),and strong anti-interference ability.Additionally,QFPD demonstrated good biocompatibility and could realize real-time dynamic monitoring of endogenous ONOO-.Furthermore,QFPD was successfully applied to environmental toxicology research by visualizing the oxidative stress effects induced by microplastics polymethyl methacrylate(PMMA)and Hg2+exposure,which might be a novel tool for the mechanism research on oxidative stress associated with microplastic pollution and heavy metal exposure.

Mycophenolic acid (MPA), the active moiety of both mycophenolate mofetil (MMF) and enteric-coated mycophenolate sodium (EC-MPS), serves as a primary immunosuppressant for maintaining solid organ transplants. Therapeutic drug monitoring (TDM) enhances treatment outcomes through tailored approaches. This study aimed to develop an evidence-based guideline for MPA TDM, facilitating its rational application in clinical settings. The guideline plan was drawn from the Institute of Medicine and World Health Organization (WHO) guidelines. Using the Delphi method, clinical questions and outcome indicators were generated. Systematic reviews, Grading of Recommendations Assessment, Development, and Evaluation (GRADE) evidence quality evaluations, expert opinions, and patient values guided evidence-based suggestions for the guideline. External reviews further refined the recommendations. The guideline for the TDM of MPA (IPGRP-2020CN099) consists of four sections and 16 recommendations encompassing target populations, monitoring strategies, dosage regimens, and influencing factors. High-risk populations, timing of TDM, area under the curve (AUC) versus trough concentration (C₀), target concentration ranges, monitoring frequency, and analytical methods are addressed. Formulation-specific recommendations, initial dosage regimens, populations with unique considerations, pharmacokinetic-informed dosing, body weight factors, pharmacogenetics, and drug‍-‍drug interactions are covered. The evidence-based guideline offers a comprehensive recommendation for solid organ transplant recipients undergoing MPA therapy, promoting standardization of MPA TDM, and enhancing treatment efficacy and safety.
Mycophenolic Acid/administration & dosage* ; Drug Monitoring/methods* ; Humans ; Organ Transplantation ; Immunosuppressive Agents/administration & dosage* ; Delphi Technique

By systematically combing ancient and modern literature， this paper examined Tribuli Fructus and Astragali Complanati Semen（ACS） used in the famous classical formulas from the aspects of name， origin， production area， harvesting and processing， clinical efficacy， so as to provide a basis for the development of famous classical formulas containing such medicinal materials. The results showed that the names of Tribuli Fructus in the past dynasties were mostly derived from its morphology， and there were nicknames such as Baijili， Cijili and Dujili. The name of ACS in the past dynasties were mostly originated from its production areas， and there were nicknames such as Baijili， Shayuan Jili and Tongjili. Because both of them had the name of Baijili， confusion began to appear in the Song dynasty. In ancient and modern times， the main origin of Tribuli Fructus were Tribulus terrestris， and ancient literature recorded the genuine producing areas of Tribuli Fructus was Dali in Shaanxi and Tianshui in Gansu， but today it is mainly cultivated in Anhui and Shandong. The fruit is the medicinal part， harvested in autumn throughout history. There is no description of the quality of Tribuli Fructus in ancient times， and the plump， firm texture， grayish-white color is the best in modern times. Traditional processing methods for Tribuli Fructus included stir-frying and wine processing， while modern commonly used is purified， fried and salt-processed. The ancient records of Tribuli Fructus were spicy， bitter， and warm in nature， with modern research adding that it is slightly toxic. The main effects of ancient and modern times include treating wind disorders， improving vision， promoting muscle growth， and treating vitiligo. The mainstream base of ACS used throughout history is Astragalus complanatus. Ancient texts indicated ACS primarily originated from Shaanxi province. Today， the finest varieties come from Tongguan and Dali in Shaanxi. The medicinal part is the seed， traditionally harvested in autumn. Modern harvesting occurs in late autumn or early winter， followed by sun-drying. Ancient texts valued seeds with a fragrant aroma as superior， while modern standards prioritize plump， uniform and free of impurities. Traditional processing methods for ACS included frying until blackened and wine-frying， while modern practice commonly employs purification methods. In terms of medicinal properties， the ancient and modern records are sweet and warm in nature. Due to originally classified under Tribuli Fructus， its effects were thus regarded as equivalent to those of Tribuli Fructus， serving as the medicine for treating wind disorders， additional functions included tonifying the kidneys and treating vitiligo. The present record of its efficacy is to tonify the kidney and promote Yang， solidify sperm and reduce urine， nourish the liver and brighten the eye， etc. Based on the textual research results， it is suggested that when developing the famous classical formulas of Tribuli Fructus medicinal materials， we should pay attention to the specific reference object of Baijili， T. terrestris and A. complanatus should be identified and selected， and the processing method should be in accordance with the requirements of the formulas.

Objective To explore the influencing factors of immune-associated thyroid dysfunction caused by sintilimab treatment in solid tumors and construct a prediction model.Methods Medical records of patients diagnosed with solid tumors and treated with sintilimab at Peking University People's Hospital(Xizhimen Campus,Tongzhou Campus,Shijiazhuang Campus)from January 2023 to September 2024 were collected to explore the influencing factors that caused immune-related thyroid dysfunction using univariate and multifactorial binary logistic regression analyses and to establish a prediction model.The predictive effect of the model was assessed using the receiver operating characteristic(ROC)curve.Results A total of 120 patients were included,and 33 presented with immune-related thyroid dysfunction.Multifactorial logistic regression analysis revealed that thyroid-stimulating hormone(TSH)[OR=2.470,95%CI=(1.279,4.771)]and treatment cycles[OR=1.298,95%CI=(1.117,1.509)]were independent risk factors for the occurrence of immune-associated thyroid dysfunction,and the difference was statistically significant(P＜0.05).The area under the ROC curve was(0.897±0.043)[95%CI=(0.813,0.981)],the Yoden index was 0.703,and the model prediction accuracy was 86.5%.Conclusion The risk of immune-related thyroid dysfunction caused by sintilimab is high,and TSH and treatment cycle are the influencing factors,and the constructed model has certain predictive value and is of reference significance.

Objective:To investigate the influence and mechanism of bone marrow mesenchymal stem cells (BMSCs) overexpressing growth arrest specific 6, i.e. GAS6/BMSCs on full-thickness skin defect wounds in diabetic mice.Methods:This study was an experimental study. Twelve 8-week-old male C57BL/6J mice were divided into a control wound group with only full-thickness skin defects and a diabetic wound group with diabetic full-thickness skin defects according to the random number table method, with 6 mice in each group. The wound healing rates were calculated at 3, 7, 14, and 21 days after injury. At 21 days after injury, wound tissue specimens were collected for hematoxylin-eosin staining to observe the histopathological conditions; Masson staining was performed to detect collagen deposition; immunohistochemical staining was performed to detect the number of proliferating cell nuclear antigen (PCNA)-positive cells and CD31-positive cells, representing cell proliferation and capillary density, respectively; immunofluorescence staining was performed to detect the number of F4/80 and myeloperoxidase (MPO) double-positive cells, indicating efferocytosis. Two 4-week-old male C57BL/6J mice were used to extract BMSCs, and GAS6/BMSCs were constructed through adenovirus transfection and successfully identified. Eighteen 8-week-old male C57BL/6J mice were used to create diabetic full-thickness skin defect wound models and divided into phosphate buffered solution (PBS) group, BMSC group, and GAS6/BMSC group (with 6 mice in each group) according to the random number table method. Immediately after injury, PBS, BMSC single-cell suspension, and GAS6/BMSC single-cell suspension were injected locally into the wounds of the three groups of mice, respectively. The wound healing rates were calculated, and the cell proliferation, capillary density, and efferocytosis were detected at the same time points as the previous experiments.Results:At 3, 7, 14, and 21 days after injury, the wound healing rates of mice in diabetic wound group were significantly lower than those in control wound group (with t values of 7.99, 8.62, 9.80, and 5.85, respectively, P<0.05). Compared with those in control wound group, the wound tissue of mice in diabetic wound group showed the infiltration of a large number of inflammatory cells and reduced collagen deposition at 21 days after injury. At 21 days after injury, the number of PCNA-positive cells and CD31-positive cells in the wound tissue of mice in diabetic wound group were significantly less than that in control wound group (with t values of 6.61 and 5.38, respectively, P<0.05). At 21 days after injury, the number of F4/80 and MPO double-positive cells in the wound tissue of mice in diabetic wound group was 3.3±0.8, which was significantly less than 12.7±1.8 in control wound group ( t=11.00, P<0.05). At 14 and 21 days after injury, the wound healing rates of mice in BMSC group were significantly higher than those in PBS group ( P<0.05); at 3, 7, 14, and 21 days after injury, the wound healing rates of mice in GAS6/BMSC group were significantly higher than those in BMSC group ( P<0.05). At 21 days after injury, the number of PCNA-positive cells in the wound tissue of mice in BMSC group was significantly higher than that in PBS group ( P<0.05), and the number of PCNA-positive cells and CD31-positive cells in the wound tissue of mice in GAS6/BMSC group were significantly higher than that in BMSC group ( P<0.05). At 21 days after injury, the number of F4/80 and MPO double-positive cells in the wound tissue of mice in BMSC group was 4.2±1.2, which was similar to 3.5±1.1 in PBS group ( P>0.05); the number of F4/80 and MPO double-positive cells in the wound tissue of mice in GAS6/BMSC group was 8.2±1.2, which was significantly more than that in BMSC group ( P<0.05). Conclusions:Dysfunctional efferocytosis of macrophage exists in the full-thickness skin defect wounds of diabetic mice, while GAS6/BMSC can promote wound healing by restoring the efferocytosis of macrophages.