Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

Mycophenolic acid (MPA), the active moiety of both mycophenolate mofetil (MMF) and enteric-coated mycophenolate sodium (EC-MPS), serves as a primary immunosuppressant for maintaining solid organ transplants. Therapeutic drug monitoring (TDM) enhances treatment outcomes through tailored approaches. This study aimed to develop an evidence-based guideline for MPA TDM, facilitating its rational application in clinical settings. The guideline plan was drawn from the Institute of Medicine and World Health Organization (WHO) guidelines. Using the Delphi method, clinical questions and outcome indicators were generated. Systematic reviews, Grading of Recommendations Assessment, Development, and Evaluation (GRADE) evidence quality evaluations, expert opinions, and patient values guided evidence-based suggestions for the guideline. External reviews further refined the recommendations. The guideline for the TDM of MPA (IPGRP-2020CN099) consists of four sections and 16 recommendations encompassing target populations, monitoring strategies, dosage regimens, and influencing factors. High-risk populations, timing of TDM, area under the curve (AUC) versus trough concentration (C₀), target concentration ranges, monitoring frequency, and analytical methods are addressed. Formulation-specific recommendations, initial dosage regimens, populations with unique considerations, pharmacokinetic-informed dosing, body weight factors, pharmacogenetics, and drug‍-‍drug interactions are covered. The evidence-based guideline offers a comprehensive recommendation for solid organ transplant recipients undergoing MPA therapy, promoting standardization of MPA TDM, and enhancing treatment efficacy and safety.
Mycophenolic Acid/administration & dosage* ; Drug Monitoring/methods* ; Humans ; Organ Transplantation ; Immunosuppressive Agents/administration & dosage* ; Delphi Technique

Objective To explore the influencing factors of immune-associated thyroid dysfunction caused by sintilimab treatment in solid tumors and construct a prediction model.Methods Medical records of patients diagnosed with solid tumors and treated with sintilimab at Peking University People's Hospital(Xizhimen Campus,Tongzhou Campus,Shijiazhuang Campus)from January 2023 to September 2024 were collected to explore the influencing factors that caused immune-related thyroid dysfunction using univariate and multifactorial binary logistic regression analyses and to establish a prediction model.The predictive effect of the model was assessed using the receiver operating characteristic(ROC)curve.Results A total of 120 patients were included,and 33 presented with immune-related thyroid dysfunction.Multifactorial logistic regression analysis revealed that thyroid-stimulating hormone(TSH)[OR=2.470,95%CI=(1.279,4.771)]and treatment cycles[OR=1.298,95%CI=(1.117,1.509)]were independent risk factors for the occurrence of immune-associated thyroid dysfunction,and the difference was statistically significant(P＜0.05).The area under the ROC curve was(0.897±0.043)[95%CI=(0.813,0.981)],the Yoden index was 0.703,and the model prediction accuracy was 86.5%.Conclusion The risk of immune-related thyroid dysfunction caused by sintilimab is high,and TSH and treatment cycle are the influencing factors,and the constructed model has certain predictive value and is of reference significance.

Objective:To evaluate the efficacy and safety of nebulized inhalation of recombinant human interferon (IFN) α1b injection in the treatment of respiratory syncytial virus (RSV) associated lower respiratory tract infections (pneumonia and bronchiolitis) in children.Methods:A randomized, double-blind, parallel, placebo-controlled add-on design was used.Children with pneumonia or bronchiolitis aged 2 months to 5 years who tested positive for RSV antigen within 72 hours of onset from 30 clinical trial sites including Beijing Children′s Hospital, Capital Medical University between February 2021 and December 2022 were included in this study and randomly divided into 2 groups at a ratio of 1∶1 based on a stratified-block method.Both groups received basic treatments such as cough control, asthma relieving, expectorant treatment, fever reduction, oxygen therapy, etc.The experimental group received additional nebulized inhalation of IFN α1b injection at a dose of 2.0 μg/(kg·time), twice a day.The control group received nebulized inhalation of placebo twice a day.Clinical efficacy was evaluated based on indicators such as the duration of clinical symptoms and signs, and the Kaplan-Meier method was used to calculate the median and 95% CI of the duration of clinical symptoms and signs.The Log-rank test was used to compared data between groups.Safety was assessed through the incidence of adverse reactions and laboratory tests, and the Chi-square test was used to analyze the difference between groups. Results:There were 123 children in the experimental group and 122 children in the control group.The median durations of all the 5 clinical symptoms and signs [including shortness of breath, wheezing, dyspnea (visible retractions), decreased transcutaneous oxygen saturation, and abnormal mental state] in the experimental group after treatment were slightly shortened than those in the control group [2.7 d(95% CI: 1.9-3.0 d)] vs.[2.9 d(95% CI: 2.6-3.6 d), P=0.027].The improvement in dyspnea (retractions) was especially pronounced in the experimental group, with a relief rate of 50.0% (0, 100%) on the first day of administration[compared with 0 (0, 50.0%) in the control group ( Z=2.002, P=0.025)].The median duration of dyspnea in the experimental group was nearly 1 day shorter than that in the control group [1.0 d(95% CI: 0.7-1.7 d) vs.1.8 d(95% CI: 1.0-2.5 d), P=0.046].There were no significant difference in hospital stay [6.0(5.0, 8.0) d vs.6.5(5.0, 8.0) d, Z=0.675, P=0.500], oxygen therapy duration [32.0(14.0, 96.3) h vs.39.0 (24.0, 83.2) h, Z=0.094, P=0.925], the recovery rate from clinical symptoms during treatment [(105/106, 99.1%) vs.(96/101, 95.0%)], and recurrence rate [(0/106, 0) vs.(2/101, 2.0%)] between the 2 groups (all P>0.05).However, the above-mentioned four indicators in the experimental group showed a trend of clinical benefits.The quantitative virus detection results showed that the RSV viral load in both groups decreased after treatment compared to before treatment.After 2 days of treatment, the decline rate of RSV viral load from the baseline was 0.90 lg copies/(mL·d) in the experimental group and 0.25 lg copies/(mL·d)in the control group, with a statistically significant difference ( P<0.05).Furthermore, there was no statistically significant difference in the incidence of adverse reactions between the 2 groups ( P>0.05).Importantly, no drug-related serious adverse reactions occurred in both groups. Conclusions:The nebulized inhalation therapy of IFN α1b demonstrates efficacy and safety in treating pediatric RSV associated lower respiratory tract infections.It particularly offers outstanding clinical therapeutic value for severe children.

Artificial intelligence(AI)has emerged as a cutting-edge technology leading the future and is a key engine for China's development.In the innovation and research of medical devices,AI has provided critical support in the areas of intelligent diagnostic assistance,intelligent therapeutic assis-tance,intelligent monitoring,life support,et al.Ma-chine learning-enabled device software functions(ML-DSFs)have become an essential component of many medical devices.Recently,the United States Food and Drug Administration(FDA)released a draft guidance titled"Marketing Submission Rec-ommendations for a Predetermined Change Con-trol Plan for Artificial Intelligence/Machine Learn-ing(AI/ML)-Enabled Device Software Functions(Draft)."that aimed to provide a forward-looking approach to foster the development of ML medical devices.By supporting iterative updates through modifications,this approach ensures the continu-ous safety and effectiveness of the devices.This guidance represents the latest in regulatory direc-tion and is especially beneficial for enhancing the quality and efficiency of clinical trials for AI prod-ucts.Therefore,we plan to provide a detailed intro-duction and interpretation of the guidance,with the aim of learning from international advanced regulatory concepts and experiences to promote the development of ML-DSFs with more profound international influence.

Objective:To evaluate the efficacy and safety of nebulized inhalation of recombinant human interferon (IFN) α1b injection in the treatment of respiratory syncytial virus (RSV) associated lower respiratory tract infections (pneumonia and bronchiolitis) in children.Methods:A randomized, double-blind, parallel, placebo-controlled add-on design was used.Children with pneumonia or bronchiolitis aged 2 months to 5 years who tested positive for RSV antigen within 72 hours of onset from 30 clinical trial sites including Beijing Children′s Hospital, Capital Medical University between February 2021 and December 2022 were included in this study and randomly divided into 2 groups at a ratio of 1∶1 based on a stratified-block method.Both groups received basic treatments such as cough control, asthma relieving, expectorant treatment, fever reduction, oxygen therapy, etc.The experimental group received additional nebulized inhalation of IFN α1b injection at a dose of 2.0 μg/(kg·time), twice a day.The control group received nebulized inhalation of placebo twice a day.Clinical efficacy was evaluated based on indicators such as the duration of clinical symptoms and signs, and the Kaplan-Meier method was used to calculate the median and 95% CI of the duration of clinical symptoms and signs.The Log-rank test was used to compared data between groups.Safety was assessed through the incidence of adverse reactions and laboratory tests, and the Chi-square test was used to analyze the difference between groups. Results:There were 123 children in the experimental group and 122 children in the control group.The median durations of all the 5 clinical symptoms and signs [including shortness of breath, wheezing, dyspnea (visible retractions), decreased transcutaneous oxygen saturation, and abnormal mental state] in the experimental group after treatment were slightly shortened than those in the control group [2.7 d(95% CI: 1.9-3.0 d)] vs.[2.9 d(95% CI: 2.6-3.6 d), P=0.027].The improvement in dyspnea (retractions) was especially pronounced in the experimental group, with a relief rate of 50.0% (0, 100%) on the first day of administration[compared with 0 (0, 50.0%) in the control group ( Z=2.002, P=0.025)].The median duration of dyspnea in the experimental group was nearly 1 day shorter than that in the control group [1.0 d(95% CI: 0.7-1.7 d) vs.1.8 d(95% CI: 1.0-2.5 d), P=0.046].There were no significant difference in hospital stay [6.0(5.0, 8.0) d vs.6.5(5.0, 8.0) d, Z=0.675, P=0.500], oxygen therapy duration [32.0(14.0, 96.3) h vs.39.0 (24.0, 83.2) h, Z=0.094, P=0.925], the recovery rate from clinical symptoms during treatment [(105/106, 99.1%) vs.(96/101, 95.0%)], and recurrence rate [(0/106, 0) vs.(2/101, 2.0%)] between the 2 groups (all P>0.05).However, the above-mentioned four indicators in the experimental group showed a trend of clinical benefits.The quantitative virus detection results showed that the RSV viral load in both groups decreased after treatment compared to before treatment.After 2 days of treatment, the decline rate of RSV viral load from the baseline was 0.90 lg copies/(mL·d) in the experimental group and 0.25 lg copies/(mL·d)in the control group, with a statistically significant difference ( P<0.05).Furthermore, there was no statistically significant difference in the incidence of adverse reactions between the 2 groups ( P>0.05).Importantly, no drug-related serious adverse reactions occurred in both groups. Conclusions:The nebulized inhalation therapy of IFN α1b demonstrates efficacy and safety in treating pediatric RSV associated lower respiratory tract infections.It particularly offers outstanding clinical therapeutic value for severe children.

Objective To explore the variable pressure matress and thermoplastic mold applied to cone beam CT-guided radiotherapy of abdominal and pelvic cancer in terms of translation error,rotation angle error and setup reproducibility of patients with different body mass indexes(BMIs),so as to provide references for the selection of body fixation mode.Methods Totally 70 patients with abdominal and pelvic tumors admitted to some hospital from April 2021 to March 2022 were retrospectively selected,and divided into a variable pressure mattress group and a thermoplastic mold group according to the fixation method,with 35 patients in each group.All the patients in the two groups underwent examinations with cone beam computed tomography(CBCT)at the first radiotherapy treatment and during the course of the treatment,and the image registration was carried out between validation images and planning images.The two groups were compared in terms of rotation angle error and thranlation error at the directoins of x axis(lateral directions),y axis(cranial-caudal)and z axis(ventral-dorsal).Taking the center point image of the initial positioning as the reference,the errors of the center points of the two groups at z and y axes(Δz and Δy)were compared.The setup reproducibility was set as Δz≤5 mm and Δy≤3 mm,and the setup reproducibility rates of the two groups were summarized.All the patients were categorized into non-overweight ones(BMI<25 kg/m2)and overweight ones(BMI≥25 kg/m2),and the setup reproducibility rates of the patients with different BMIs were counted.SPSS 26.0 software was used for statistical analysis.Results The two groups had no significant differences in translation error at the directions of x and y axes(P>0.05).The variable pressure mattress group had the translation error at the direction of z axis statistically lower than that of the thermoplastic mold group(P<0.05).There were no significant differences between the two groups in rotation angle error(P=0.219 3).The two groups had significant differences in setup reproducibility(P=0.033 4).The non-overweight patients had the setup reproducibility rate being 40.00%in the variable pressure mattress group,and 77.14%in the thermoplastic mold group;the overweight patients had the setup reproducibility rate being 25.71%in the variable pressure mattress group and only 2.86%in the thermoplastic mold group,with the differences between the two groups being statistically significant(P=0.002 9).Conclusion The variable pressure mattress and thermoplastic mold both result in low setup errors when applied to fixation during the radiotherapy of abdominal and pelvic cancer,the thermoplastic mold fixation can be used for the patients with BMIs lower than 25 kg/m2 with decreased translation errors at the direction of z axis,and the variable pressure mattress fixation was suitable for the patients with BMIs not lower than 25 kg/m2.[Chinese Medical Equipment Journal,2025,46(7):45-50]

Artificial intelligence(AI)has emerged as a cutting-edge technology leading the future and is a key engine for China's development.In the innovation and research of medical devices,AI has provided critical support in the areas of intelligent diagnostic assistance,intelligent therapeutic assis-tance,intelligent monitoring,life support,et al.Ma-chine learning-enabled device software functions(ML-DSFs)have become an essential component of many medical devices.Recently,the United States Food and Drug Administration(FDA)released a draft guidance titled"Marketing Submission Rec-ommendations for a Predetermined Change Con-trol Plan for Artificial Intelligence/Machine Learn-ing(AI/ML)-Enabled Device Software Functions(Draft)."that aimed to provide a forward-looking approach to foster the development of ML medical devices.By supporting iterative updates through modifications,this approach ensures the continu-ous safety and effectiveness of the devices.This guidance represents the latest in regulatory direc-tion and is especially beneficial for enhancing the quality and efficiency of clinical trials for AI prod-ucts.Therefore,we plan to provide a detailed intro-duction and interpretation of the guidance,with the aim of learning from international advanced regulatory concepts and experiences to promote the development of ML-DSFs with more profound international influence.

Objective To explore the variable pressure matress and thermoplastic mold applied to cone beam CT-guided radiotherapy of abdominal and pelvic cancer in terms of translation error,rotation angle error and setup reproducibility of patients with different body mass indexes(BMIs),so as to provide references for the selection of body fixation mode.Methods Totally 70 patients with abdominal and pelvic tumors admitted to some hospital from April 2021 to March 2022 were retrospectively selected,and divided into a variable pressure mattress group and a thermoplastic mold group according to the fixation method,with 35 patients in each group.All the patients in the two groups underwent examinations with cone beam computed tomography(CBCT)at the first radiotherapy treatment and during the course of the treatment,and the image registration was carried out between validation images and planning images.The two groups were compared in terms of rotation angle error and thranlation error at the directoins of x axis(lateral directions),y axis(cranial-caudal)and z axis(ventral-dorsal).Taking the center point image of the initial positioning as the reference,the errors of the center points of the two groups at z and y axes(Δz and Δy)were compared.The setup reproducibility was set as Δz≤5 mm and Δy≤3 mm,and the setup reproducibility rates of the two groups were summarized.All the patients were categorized into non-overweight ones(BMI<25 kg/m2)and overweight ones(BMI≥25 kg/m2),and the setup reproducibility rates of the patients with different BMIs were counted.SPSS 26.0 software was used for statistical analysis.Results The two groups had no significant differences in translation error at the directions of x and y axes(P>0.05).The variable pressure mattress group had the translation error at the direction of z axis statistically lower than that of the thermoplastic mold group(P<0.05).There were no significant differences between the two groups in rotation angle error(P=0.219 3).The two groups had significant differences in setup reproducibility(P=0.033 4).The non-overweight patients had the setup reproducibility rate being 40.00%in the variable pressure mattress group,and 77.14%in the thermoplastic mold group;the overweight patients had the setup reproducibility rate being 25.71%in the variable pressure mattress group and only 2.86%in the thermoplastic mold group,with the differences between the two groups being statistically significant(P=0.002 9).Conclusion The variable pressure mattress and thermoplastic mold both result in low setup errors when applied to fixation during the radiotherapy of abdominal and pelvic cancer,the thermoplastic mold fixation can be used for the patients with BMIs lower than 25 kg/m2 with decreased translation errors at the direction of z axis,and the variable pressure mattress fixation was suitable for the patients with BMIs not lower than 25 kg/m2.[Chinese Medical Equipment Journal,2025,46(7):45-50]

Objective To explore the influencing factors of immune-associated thyroid dysfunction caused by sintilimab treatment in solid tumors and construct a prediction model.Methods Medical records of patients diagnosed with solid tumors and treated with sintilimab at Peking University People's Hospital(Xizhimen Campus,Tongzhou Campus,Shijiazhuang Campus)from January 2023 to September 2024 were collected to explore the influencing factors that caused immune-related thyroid dysfunction using univariate and multifactorial binary logistic regression analyses and to establish a prediction model.The predictive effect of the model was assessed using the receiver operating characteristic(ROC)curve.Results A total of 120 patients were included,and 33 presented with immune-related thyroid dysfunction.Multifactorial logistic regression analysis revealed that thyroid-stimulating hormone(TSH)[OR=2.470,95%CI=(1.279,4.771)]and treatment cycles[OR=1.298,95%CI=(1.117,1.509)]were independent risk factors for the occurrence of immune-associated thyroid dysfunction,and the difference was statistically significant(P＜0.05).The area under the ROC curve was(0.897±0.043)[95%CI=(0.813,0.981)],the Yoden index was 0.703,and the model prediction accuracy was 86.5%.Conclusion The risk of immune-related thyroid dysfunction caused by sintilimab is high,and TSH and treatment cycle are the influencing factors,and the constructed model has certain predictive value and is of reference significance.