ObjectiveTo investigate whether Huanglian Jiedutang （HLJD） and its major active constituents （geniposide， baicalin， and berberine） can inhibit the inflammatory response of BV2 cells under lipopolysaccharide （LPS） stimulation via the high-mobility group protein B1 （HMGB1）/Toll-like receptor 4 （TLR4）/nuclear factor-κB （NF-κB） signaling pathway， and to explore differences in therapeutic efficacy among the three monomers， their combined formula， and HLJD under equal content ratios. MethodsBV2 microglial cells were used as the primary experimental model. Cell viability was assessed using the cell counting kit-8 （CCK-8） method to examine the effects of different concentrations of dimethyl sulfoxide （DMSO， 0.8%， 0.4%， 0.2%， 0.1%， and 0.05%） on cell viability. IncuCyte was employed to monitor the growth of cells under different concentrations of HLJD （200， 100， 50， 25， 12.5， 6.25 mg·L^-1）. Nitric oxide （NO） assay was used to screen the optimal HLJD concentration. High-performance liquid chromatography （HPLC） determined the content of geniposide， baicalin， and berberine in HLJD， and experimental groups were subsequently established according to the relative proportions of these constituents. CCK-8 assay evaluated cell viability under different treatments. Enzyme-linked immunosorbent assay （ELISA） measured levels of inflammatory factors （TNF-α， IL-1β， IL-6， IL-10） in the supernatant. Flow cytometry assessed the effects of treatments on M1-type polarization of BV2 cells. Western blot determined the expression levels of HMGB1， TLR4， and NF-κB-related proteins. ResultsCompared with the blank group， DMSO at concentrations ≤0.2% did not affect cell viability within 48 h. BV2 cell growth plateaued at 24 h after treatment with 200 mg·L^-1 HLJD. Under stimulation with 2 mg·L^-1 LPS， this concentration of HLJD effectively reduced NO release， and 6 h pre-treatment had a stronger inhibitory effect on NO than direct administration. HPLC results showed that 1 mg of HLJD freeze-dried powder contained approximately 24 μg of geniposide， 15 μg of baicalin， and 30 μg of berberine. Based on these ratios， experimental groups were blank， LPS （2 mg·L^-1）， HLJD （200 mg·L^-1）， monomer combination， geniposide （4.8 mg·L^-1）， baicalin （3 mg·L^-1）， and berberine （6 mg·L^-1）. The monomer combination group consisted of all three active constituents dissolved together. LPS and HLJD or its active constituents did not affect cell viability compared with the blank group. LPS significantly increased TNF-α， IL-1β， IL-6， and IL-10 in the supernatant （P<0.01）. HLJD and its active constituents significantly reduced pro-inflammatory factors TNF-α， IL-1β， and IL-6 （P<0.05， P<0.01） while upregulating anti-inflammatory IL-10 （P<0.01）， with the monomer combination showing the strongest effect （P<0.05， P<0.01）. Compared with the blank group， LPS significantly increased the proportion of CD80⁺CD86⁺ （M1-type） BV2 cells （P<0.01）. HLJD and its constituents partially inhibited M1 polarization （P<0.05， P<0.01）， with the monomer combination exhibiting the most pronounced effect （P<0.05， P<0.01）. Compared with the blank group， LPS upregulated HMGB1， TLR4， and NF-κB-related proteins （P<0.01）， whereas HLJD and its active constituents significantly reduced their expression （P<0.05， P<0.01）， with the monomer combination having the strongest regulatory effect （P<0.05， P<0.01）. ConclusionHLJD and its major active constituents （geniposide， baicalin， berberine） can inhibit LPS-induced inflammatory responses in BV2 cells. The combination of the three active constituents demonstrates the most potent anti-inflammatory effect， significantly attenuating M1-type polarization of BV2 cells via the HMGB1/TLR4/NF-κB signaling pathway.

Huanglian Jiedutang （HLJDT）， as a classical formula for clearing heat and removing toxins， has been widely applied in the treatment of various clinical diseases in recent years， particularly during the fire-heat stage of stroke， where it has attracted considerable attention. Based on previous studies， this paper systematically elaborates on the research progress on the active components of HLJDT， its clinical application in ischemic stroke， and advances in studies on its mechanisms of action. Modern pharmacological studies have demonstrated that HLJDT contains multiple active components， including baicalin， geniposide， and berberine. In the treatment of ischemic stroke， these components exert therapeutic effects through multi-target， multi-pathway， and multi-level mechanisms. Clinical studies have shown that HLJDT can increase cerebral blood flow， reduce cerebral infarct volume， and improve post-stroke physical dysfunction in patients with ischemic stroke. Experimental studies have indicated that HLJDT can improve neurological function scores and increase cerebral perfusion in experimental stroke models. In addition， the mechanisms underlying the anti-ischemic stroke effects of HLJDT may be related to anti-inflammatory and antioxidant activities， promotion of angiogenesis， and regulation of amino acid and energy metabolism. Although existing studies have confirmed that HLJDT exhibits multi-target and multi-pathway synergistic therapeutic characteristics， further large-sample randomized controlled trials are still needed to verify its long-term efficacy and to further elucidate the dynamic interaction network among components， targets， and pathways. Combined with network pharmacology and molecular docking analyses， this study further clarifies the synergistic targets of the core components （berberine， baicalin， and geniposide）， providing a theoretical basis for in-depth research and clinical translation of HLJDT in the treatment of ischemic stroke.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

Traditional Chinese medicine(TCM) resources are the essential material foundation for the development of TCM. The national survey of TCM resources serves as a periodic summary of these resources, ensuring the continuity, prosperity, and development of TCM in China. Since 1949, four national surveys of TCM resources have been conducted. The fourth survey incorporated an investigation into traditional knowledge related to TCM resources, including the traditional medicinal knowledge of Chinese ethnic minorities, with the goal of systematically exploring, preserving, and inheriting this knowledge. This manuscript provides an overview of the basic findings from the first three national surveys of TCM resources, while also clarifying the concepts, categories, forms, carriers, and acquisition pathways of traditional knowledge related to TCM resources. A preliminary summary of the findings from traditional knowledge investigations reported in current literature is also presented. Based on the fourth survey, this manuscript emphasizes the urgency of developing public medical knowledge through empirically-based investigations, the excavation, and compilation of traditional knowledge. It also outlines the potential for conducting "precise" investigations based on first-hand data obtained from the survey, as well as facilitating the discovery and evaluation of new medicines using traditional knowledge related to ethnic minority medicinal practices. This manuscript is expected to provide valuable insights for promoting the health and industrial development of ethnic minority populations in the post-"survey" phase.
Humans ; Medicine, Chinese Traditional ; China/ethnology* ; Minority Groups ; Ethnicity ; Drugs, Chinese Herbal/therapeutic use* ; Health Knowledge, Attitudes, Practice/ethnology* ; Surveys and Questionnaires

To address the issues of difficulty in preserving anatomical structures, low realism of generated images, and loss of high-frequency image information in medical image cross-modal translation, this paper proposes a medical image cross-modal translation method based on diffusion generative adversarial networks. First, an unsupervised translation module is used to convert magnetic resonance imaging (MRI) into pseudo-computed tomography (CT) images. Subsequently, a nonlinear frequency decomposition module is used to extract high-frequency CT images. Finally, the pseudo-CT image is input into the forward process, while the high-frequency CT image as a conditional input is used to guide the reverse process to generate the final CT image. The proposed model is evaluated on the SynthRAD2023 dataset, which is used for CT image generation for radiotherapy planning. The generated brain CT images achieve a Fréchet Inception Distance (FID) score of 33.159 7, a structure similarity index measure (SSIM) of 89.84%, a peak signal-to-noise ratio (PSNR) of 35.596 5 dB, and a mean squared error (MSE) of 17.873 9. The generated pelvic CT images yield an FID score of 33.951 6, a structural similarity index of 91.30%, a PSNR of 34.870 7 dB, and an MSE of 17.465 8. Experimental results show that the proposed model generates highly realistic CT images while preserving anatomical accuracy as much as possible. The transformed CT images can be effectively used in radiotherapy planning, further enhancing diagnostic efficiency.
Humans ; Tomography, X-Ray Computed/methods* ; Magnetic Resonance Imaging/methods* ; Image Processing, Computer-Assisted/methods* ; Neural Networks, Computer ; Brain/diagnostic imaging* ; Algorithms ; Radiotherapy Planning, Computer-Assisted ; Generative Adversarial Networks

This paper summarizes Professor SHI Zaixiang's clinical experience in treating high fever caused by sepsis using Chaihu Guizhi Ganjiang Decoction （柴胡桂枝干姜汤）. He holds that the key pathogenesis of sepsis involves constrained heat in the shaoyang and internal accumulation of water and fluids. The clinical manifestations such as high fever， chills， and alternating sensations of cold and heat are attributed to pathogenic heat constrained in the shaoyang. Meanwhile， soft tissue edema and serous cavity effusions are due to shaoyang dysfunction and internal water retention. In clinical practice， treating sepsis-related high fever requires addressing both the shaoyang-constrained heat and the associated edema and effusions. The therapeutic approach focuses on harmonizing the shaoyang and resolving internal fluids， using Chaihu Guizhi Ganjiang Decoction as the base formula with flexible modifications. Professor SHI emphasizes that this formula shows a rapid antipyretic effect， particularly in cases where multiple anti-infective treatments have failed.

OBJECTIVE: To investigate the accuracy and safety of pedicle screw placement using 3D-printed auxiliary guides in scoliosis correction surgery for adolescents. METHODS: A retrospective analysis was conducted on the clinical data of 51 patients who underwent posterior scoliosis correction surgery from January 2020 to March 2023. Among them, there were 35 cases of adolescent idiopathic scoliosis and 16 cases of congenital scoliosis. The patients were divided into two groups based on the auxiliary tool used:the 3D-printed auxiliary guide screw placement group (3D printing group) and the free-hand screw placement group (free-hand group, without auxiliary tools). The 3D printing group included 32 patients (12 males and 20 females) with an average age of (12.59±2.60) years;the free-hand group included 19 patients (7 males and 12 females) with an average age of (14.58±3.53) years. The two groups were compared in terms of screw placement accuracy and safety, spinal correction rate, intraoperative blood loss, number of intraoperative fluoroscopies, operation time, hospital stay, and preoperative and last follow-up scores of the Scoliosis Research Society-22 (SRS-22) questionnaire. RESULTS: A total of 707 pedicle screws were placed in the two groups, with 441 screws in the 3D printing group and 266 screws in the free-hand group. All patients in both groups successfully completed the surgery. There was a statistically significant difference in operation time between the two groups (P<0.05). The screw placement accuracy rate of the 3D printing group was 95.46% (421/441), among which the Grade A placement rate was 89.34% (394/441);the screw placement accuracy rate of the free-hand group was 86.47% (230/266), with a Grade A placement rate of 73.31% (195/266). There were statistically significant differences in the accuracy of Grade A, B, and C screw placements between the two groups (P<0.05), while no statistically significant differences were observed in intraoperative blood loss, number of fluoroscopies, correction rate, or hospital stay (P>0.05). In the SRS-22 questionnaire scores, the scores of functional status and activity ability, self-image, mental status, and pain of patients in each group at the last follow-up were significantly improved compared with those before surgery (P<0.05), but there were no statistically significant differences in all scores between the two groups (P>0.05). CONCLUSION In scoliosis correction surgery, compared with traditional free-hand screw placement, the use of 3D-printed auxiliary guides for screw placement significantly improves the accuracy and safety of screw placement and shortens the operation time.
Humans ; Male ; Scoliosis/surgery* ; Female ; Adolescent ; Printing, Three-Dimensional ; Retrospective Studies ; Pedicle Screws ; Child

OBJECTIVE: To investigate the efficacy and safety of chidamide combined with DICE regimen (cisplatin+ ifosfamide + etoposide + dexamethasone) for relapsed/refractory diffuse large B-cell lymphome(R/R DLBCL). METHODS: The clinical data of 31 R/R DLBCL patients treated by chidamide combined with DICE regimen in the Hematology Department of the Fourth Hospital of Hebei Medical University from October 2016 to October 2020 were retrospectively analyzed. The clinical efficacy and adverse events were observed. RESULTS: Among the 31 patients, 20 were male and 11 were female. The median age of the patients was 55 (range: 27-71) years old, 21 cases were < 60 years old, 10 cases were ≥60 years old. 26 cases were refractory and 5 cases were relapsed. There were 13 cases of germinal center B-cell like (GCB), 17 cases of non-GCB, and 1 case had missing Hans type. There were 17 cases of double-expression lymphoma (DEL) and 14 cases of non-DEL. The complete response rate of patients was 38.7%(12/31), the overall response rate was 67.7%(21/31). The median progression-free survival time and the median overall survival time were 9.8(95%CI : 4.048-15.552) months, 13.9(95%CI : 9.294-18.506) months, respectively. Multipvariate analysis showed that GCB and DEL reduced the risk of disease recurrence in R/R DLBCL patients. The main grade 3/4 hematological adverse events in this study were thrombocytopenia, agranulocytosis, anemia and leukopenia. CONCLUSION The chidamide combined with DICE regimen is effective in the treatment of R/R DLBCL, and hematological adverse events should be closely monitored.
Humans ; Lymphoma, Large B-Cell, Diffuse/drug therapy* ; Middle Aged ; Female ; Male ; Adult ; Aged ; Retrospective Studies ; Antineoplastic Combined Chemotherapy Protocols/therapeutic use* ; Benzamides/administration & dosage* ; Aminopyridines/administration & dosage* ; Etoposide/therapeutic use* ; Cisplatin/administration & dosage* ; Ifosfamide/administration & dosage* ; Dexamethasone/therapeutic use*

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*