Objective To establish an HPLC method to determine the concentration of inositol nicotinate（IN） in rat skin, and study the pharmacokinetic characteristics of IN after transdermal administration of heparin sodium inositol nicotinate cream in rats. Methods HPLC method was used to establish a simple and rapid analytical method for the determination of IN concentration in the skin of rats at different time points after administration. The established method was used to study the pharmacokinetics of IN after transdermal administration of heparin sodium inositol nicotinate cream in rats, and the pharmacokinetic parameters were fitted with DAS software. Results The linearity of the analytical method was good in the concentration range of 0.25-20 μg/ml, the quantitative limit was 0.25 μg/ml, and the average recovery rate was 96.18%. The pharmacokinetic parameters of IN after transdermal administration of heparin sodium inositol nicotinate cream in rats were as follows: t_1/2 was （4.555±2.054） h, T_max was （6±0）h, C_max was （16.929±2.153）mg/L, AUC_0−t was （150.665±16.568） mg·h /L ,AUC_0−∞ was （161.074±23.917） mg·h /L, MRT_（0−t） was （9.044±0.618）h, MRT_{（0−∞）} was （10.444±1.91） h, CLz/F was （0.19±0.03） L/（h·kg）, and Vz/F was （1.19±0.437） L/（h·kg）. Conclusion IN could quickly penetrate the skin and accumulate in the skin for a long time, which was beneficial to the pharmacological action of drugs on the lesion site for a long time. The method is simple, rapid, specific and reproducible, which could be successfully applied to the pharmacokinetic study of IN after transdermal administration in rats.

Objective To investigate serum β2-MG, sCHE, and PSGL-1 expression in patients with esophageal cancer and their relationship to lung infection after mediastinoscopy. Methods A total of 118 patients with esophageal cancer were selected and divided into infected and uninfected groups according to whether they developed lung infection after surgery. An automatic microbiological identification system was used to detect the pathogenic bacteria of lung infection. ELISA was used to detect the levels of β2-MG, sCHE, and PSGL-1. Multivariate logistic regression was used to analyze the influencing factors of postoperative lung infection in patients with esophageal cancer. ROC curves were plotted to analyze the assessment value of serum β2-MG, sCHE, and PSGL-1 on postoperative lung infection. Results Fifty-two strains of bacteria were isolated from the sputum of 38 patients with postoperative lung infections, and these included 35 (67.31%) Gram-negative, 14 (26.92%) Gram-positive, and 3 (5.77%) fungal strains. The difference in long-term smoking history between the infected and uninfected groups was statistically significant (P<0.05). Serum β2-MG and PSGL-1 levels were significantly higher and sCHE levels were significantly lower in the infected group than in the uninfected group (P<0.05). Serum β2-MG and PSGL-1 levels were sequentially higher (P<0.05) and sCHE levels were sequentially lower (P<0.05) in the mild, moderate, and severe lung infection groups. Long-term smoking history, β2-MG, and PSGL-1 were risk factors affecting postoperative lung infection in patients with esophageal cancer (P<0.05), and sCHE was a protective factor (P<0.05). The AUCs of serum β2-MG, sCHE, and PSGL-1 for assessing postoperative lung infections were 0.807, 0.845, and 0.800, respectively, and the AUC of the three combined factors for assessing postoperative lung infections was 0.954, which was superior to that assessed individually (Z_{combination vs. β2-MG}=2.576, Z_{combination vs. sCHE}=2.623, Z_{combination vs. PSGL-1}=2.574, all P<0.05). Conclusion The serum levels of β2-MG and PSGL-1 increase and the sCHE level decreases in patients with esophageal cancer and postoperative pulmonary infection, which are also related with lung infection. Combined testing can improve the evaluation value of postoperative pulmonary infection in patients.

This study explores the basic characteristics and potential functions of the terpene synthase(TPS) gene family members in Lonicera japonica. The L. japonica TPS(LjTPS) gene family was identified and functionally analyzed using bioinformatics methods. The results showed that a total of 70 members of the LjTPS gene family were identified in L. japonica, with protein lengths ranging from 130 to 1 437 amino acids. Most of these proteins were hydrophilic, and they were unevenly distributed across nine chromosomes. Phylogenetic analysis showed that the LjTPS gene family members were divided into six subfamilies, mainly consisting of members from the TPS-a, TPS-b, and TPS-e subfamilies. Promoter cis-acting element analysis showed that LjTPS members contained a large number of stress-responsive cis-acting elements. Aphid inoculation experiments showed that key enzyme genes in the MVA pathway for terpenoid backbone synthesis in L. japonica, such as HMGS, HMGR, MK, MPD, and the key enzyme gene in the DXP pathway, DXS, exhibited an initial increase followed by a decrease under aphid stress. The qRT-PCR analysis showed that the expression levels of the α-farnesene synthase genes LjTPS34 and LjTPS39 were down-regulated, while the expression levels of(E)-β-caryophyllene synthase genes LjTPS15 and LjTPS17 were up-regulated 12 h before aphid feeding, then began to decline. Farnesyl pyrophosphate synthase(FPS), which interacted with these genes, also displayed a pattern of increasing followed by decreasing expression. The expression of linalool synthase genes LjTPS12 and LjTPS33 was significantly up-regulated after 72 h of aphid feeding(P<0.000 1), reaching 24.39 and 22.64 times the initial expression, respectively. This pattern was in close alignment with the trend of linalool content in L. japonica. This study provides a theoretical foundation for future research on the interaction between L. japonica and pests, as well as on the functional roles of the LjTPS gene family.
Animals ; Aphids/physiology* ; Alkyl and Aryl Transferases/chemistry* ; Lonicera/parasitology* ; Phylogeny ; Plant Proteins/chemistry* ; Gene Expression Regulation, Plant ; Multigene Family ; Terpenes/metabolism*

Osteoporosis(OP) is a metabolic bone disorder characterized by reduced bone mass and degenerative bone tissue. Osteoporotic pain(OPP) is its most common clinical symptom, significantly affecting the quality of life of patients. With the limitations of modern medical treatments and the intensification of aging, it is imperative to explore more cost-effective interventions for OPP. This paper, based on databases such as China National Knowledge Infrastructure(CNKI), VIP, Wanfang, BioMed, and Web of Science, uncovered the connection between the pathogenesis of OPP in traditional Chinese medicine(TCM) and modern medical mechanisms and retrospectively summarized the basic and clinical research methods and evidence of TCM prescriptions in the treatment of OP and related pain diseases. Studies have shown that TCM prescriptions, focusing on treatments such as nourishing the kidney, strengthening the spleen, and activating blood circulation to remove blood stasis, can significantly improve pain symptoms, increase bone mineral density(BMD), and adjust bone metabolic indicators such as C-terminal telopeptide of type Ⅰ collagen(CTX), serum bone Gla-protein(S-BGP), and alkaline phosphatase(ALP). The mechanisms of action of TCM prescriptions in treating OP and improving OPP symptoms were related to signaling pathways such as Wnt/β-catenin, nuclear factor kappa-B(NF-κB), mitogen-activated protein kinase(MAPK), phosphatidylinositol 3-kinase(PI3K)/protein kinase B(Akt), and the osteoprotegerin(OPG)/receptor activator of NF-κB(RANK)/receptor activator of NF-κB ligand(RANKL) axis. Further strengthening the accumulation and analysis of clinical data, rigorously designing and conducting randomized controlled trials of TCM treatments for OPP with large sample sizes, standardizing outcome measures in basic and clinical research by using methods such as the core outcome set(COS), and incorporating mass spectrometry and omics approaches to uncover more potential active components and mechanisms may contribute to a deeper exploration of the advantages and essence of TCM prescriptions in the treatment of OPP.
Humans ; Osteoporosis/genetics* ; Drugs, Chinese Herbal/administration & dosage* ; Retrospective Studies ; Bone Density/drug effects* ; Medicine, Chinese Traditional ; Pain/metabolism* ; Animals

In recent years, hybrid brain-computer interfaces (BCIs) have gained significant attention due to their demonstrated advantages in increasing the number of targets and enhancing robustness of the systems. However, Existing studies usually construct BCI systems using intense auditory stimulation and strong central visual stimulation, which lead to poor user experience and indicate a need for improving system comfort. Studies have proved that the use of peripheral visual stimulation and lower intensity of auditory stimulation can effectively boost the user's comfort. Therefore, this study used high-frequency peripheral visual stimulation and 40-dB weak auditory stimulation to elicit steady-state visual evoked potential (SSVEP) and auditory steady-state response (ASSR) signals, building a high-comfort hybrid BCI based on weak audio-visual evoked responses. This system coded 40 targets via 20 high-frequency visual stimulation frequencies and two auditory stimulation frequencies, improving the coding efficiency of BCI systems. Results showed that the hybrid system's averaged classification accuracy was (78.00 ± 12.18) %, and the information transfer rate (ITR) could reached 27.47 bits/min. This study offers new ideas for the design of hybrid BCI paradigm based on imperceptible stimulation.
Brain-Computer Interfaces ; Humans ; Evoked Potentials, Visual/physiology* ; Acoustic Stimulation ; Photic Stimulation ; Electroencephalography ; Evoked Potentials, Auditory/physiology* ; Adult

OBJECTIVE: To explore the accuracy of human-computer interaction software in identifying and locating type C1 distal radius fractures. METHODS: Based on relevant inclusion and exclusion criteria, 14 cases of type C1 distal radius fractures between September 2023 and March 2024 were retrospectively analyzed, comprising 3 males and 11 females(aged from 27 to 82 years). The data were assigned randomized identifiers. A senior orthopedic physician reviewed the films and measured the ulnar deviation angle, radial height, palmar inclination angle, intra-articular step, and intra-articular gap for each case on the hospital's imaging system. Based on the reduction standard for distal radius fractures, cases were divided into reduction group and non-reduction group. Then, the data were sequentially imported into a human-computer interaction intelligent software, where a junior orthopedic physician analyzed the same radiological parameters, categorized cases, and measured fracture details. The categorization results from the software were consistent with manual classifications (6 reduction cases and 8 non-reduction cases). For non-reduction cases, the software performed further analyses, including bone segmentation and fracture recognition, generating 8 diagnostic reports containing fracture recognition information. For the 6 reduction cases, the senior and junior orthopedic physicians independently analyzed the data on the hospital's imaging system and the AI software, respectively. Bone segments requiring reduction were identified, verified by two senior physicians, and measured for displacement and rotation along the X (inward and outward), Z (front and back), and Y (up and down) axes. The AI software generated comprehensive diagnostic reports for these cases, which included all measurements and fracture recognition details. RESULTS: Both the manual and AI software methods consistently categorized the 14 cases into 6 reduction and 8 non-reduction groups, with identical data distributions. A paired sample t-test revealed no statistically significant differences (P>0.05) between the manual and software-based measurements for ulnar deviation angle, radial ulnar bone height, palmar inclination angle, intra-articular step, and joint space. In fracture recognition, the AI software correctly identified 10 C-type fractures and 4 B-type fractures. For the 6 reduction cases, a total of 24 bone fragments were analyzed across both methods. After verification, it was found that the bone fragments identified by the two methods were consistent. A paired sample t-tests revealed that the identified bone fragments and measured displacement and rotation angles along the X, Y, and Z axes were consistent between the two methods. No statistically significant differences(P>0.05) were found between manual and software measurements for these parameters. CONCLUSION Human-computer interaction software employing AI technology demonstrated comparable accuracy to manual measurement in identifying and locating type C1 distal radius fractures on CT imaging.
Humans ; Male ; Female ; Radius Fractures/surgery* ; Middle Aged ; Adult ; Aged ; Aged, 80 and over ; Tomography, X-Ray Computed/methods* ; Retrospective Studies ; Software ; Wrist Fractures

OBJECTIVE: To investigate the accuracy and safety of pedicle screw placement using 3D-printed auxiliary guides in scoliosis correction surgery for adolescents. METHODS: A retrospective analysis was conducted on the clinical data of 51 patients who underwent posterior scoliosis correction surgery from January 2020 to March 2023. Among them, there were 35 cases of adolescent idiopathic scoliosis and 16 cases of congenital scoliosis. The patients were divided into two groups based on the auxiliary tool used:the 3D-printed auxiliary guide screw placement group (3D printing group) and the free-hand screw placement group (free-hand group, without auxiliary tools). The 3D printing group included 32 patients (12 males and 20 females) with an average age of (12.59±2.60) years;the free-hand group included 19 patients (7 males and 12 females) with an average age of (14.58±3.53) years. The two groups were compared in terms of screw placement accuracy and safety, spinal correction rate, intraoperative blood loss, number of intraoperative fluoroscopies, operation time, hospital stay, and preoperative and last follow-up scores of the Scoliosis Research Society-22 (SRS-22) questionnaire. RESULTS: A total of 707 pedicle screws were placed in the two groups, with 441 screws in the 3D printing group and 266 screws in the free-hand group. All patients in both groups successfully completed the surgery. There was a statistically significant difference in operation time between the two groups (P<0.05). The screw placement accuracy rate of the 3D printing group was 95.46% (421/441), among which the Grade A placement rate was 89.34% (394/441);the screw placement accuracy rate of the free-hand group was 86.47% (230/266), with a Grade A placement rate of 73.31% (195/266). There were statistically significant differences in the accuracy of Grade A, B, and C screw placements between the two groups (P<0.05), while no statistically significant differences were observed in intraoperative blood loss, number of fluoroscopies, correction rate, or hospital stay (P>0.05). In the SRS-22 questionnaire scores, the scores of functional status and activity ability, self-image, mental status, and pain of patients in each group at the last follow-up were significantly improved compared with those before surgery (P<0.05), but there were no statistically significant differences in all scores between the two groups (P>0.05). CONCLUSION In scoliosis correction surgery, compared with traditional free-hand screw placement, the use of 3D-printed auxiliary guides for screw placement significantly improves the accuracy and safety of screw placement and shortens the operation time.
Humans ; Male ; Scoliosis/surgery* ; Female ; Adolescent ; Printing, Three-Dimensional ; Retrospective Studies ; Pedicle Screws ; Child

PURPOSE: To investigate the protective effect of sub-hypothermic mechanical perfusion combined with membrane lung oxygenation on ischemic hypoxic injury of yorkshire brain tissue caused by traumatic blood loss. METHODS: This article performed a random controlled trial. Brain tissue of 7 yorkshire was selected and divided into the sub-low temperature anterograde machine perfusion group (n = 4) and the blank control group (n = 3) using the random number table method. A yorkshire model of brain tissue injury induced by traumatic blood loss was established. Firstly, the perfusion temperature and blood oxygen saturation were monitored in real-time during the perfusion process. The number of red blood cells, hemoglobin content, NA⁺, K⁺, and Ca²⁺ ions concentrations and pH of the perfusate were detected. Following perfusion, we specifically examined the parietal lobe to assess its water content. The prefrontal cortex and hippocampus were then dissected for histological evaluation, allowing us to investigate potential regional differences in tissue injury. The blank control group was sampled directly before perfusion. All statistical analyses and graphs were performed using GraphPad Prism 8.0 Student t-test. All tests were two-sided, and p value of less than 0.05 was considered to indicate statistical significance. RESULTS: The contents of red blood cells and hemoglobin during perfusion were maintained at normal levels but more red blood cells were destroyed 3 h after the perfusion. The blood oxygen saturation of the perfusion group was maintained at 95% - 98%. NA⁺ and K⁺ concentrations were normal most of the time during perfusion but increased significantly at about 4 h. The Ca²⁺ concentration remained within the normal range at each period. Glucose levels were slightly higher than the baseline level. The pH of the perfusion solution was slightly lower at the beginning of perfusion, and then gradually increased to the normal level. The water content of brain tissue in the sub-low and docile perfusion group was 78.95% ± 0.39%, which was significantly higher than that in the control group (75.27% ± 0.55%, t = 10.49, p < 0.001), and the difference was statistically significant. Compared with the blank control group, the structure and morphology of pyramidal neurons in the prefrontal cortex and CA1 region of the hippocampal gyrus were similar, and their integrity was better. The structural integrity of granulosa neurons was destroyed and cell edema increased in the perfusion group compared with the blank control group. Immunofluorescence staining for glail fibrillary acidic protein and Iba1, markers of glial cells, revealed well-preserved cell structures in the perfusion group. While there were indications of abnormal cellular activity, the analysis showed no significant difference in axon thickness or integrity compared to the 1-h blank control group. CONCLUSIONS Mild hypothermic machine perfusion can improve ischemia and hypoxia injury of yorkshire brain tissue caused by traumatic blood loss and delay the necrosis and apoptosis of yorkshire brain tissue by continuous oxygen supply, maintaining ion homeostasis and reducing tissue metabolism level.
Animals ; Perfusion/methods* ; Disease Models, Animal ; Brain Injuries/etiology* ; Swine ; Male ; Hypothermia, Induced/methods*