BACKGROUND:Curcumin is the main active ingredient of turmeric and has significant medicinal value in anti-tumor,anti-inflammatory,antioxidant and other aspects.However,its poor water solubility,unstable chemical properties and easy decomposition lead to difficulty in extracting curcumin and low extraction yield.Therefore,it is particularly important to optimize the curcumin extraction method.OBJECTIVE:To enhance the extraction yield and utilization value of curcumin and optimize the curcumin extraction process and curcumin nanoparticle preparation process.METHODS:Curcumin was extracted from turmeric by ethanol extraction,ultrasonic extraction,ionic liquid extraction,enzyme extraction,and ionic liquid combined with ultrasonic assisted enzyme extraction.The curcumin extraction yield was detected by high performance liquid chromatography;the best extraction method was determined,and subsequent process optimization experiments were carried out.The curcumin extraction yield was the response value with the type of ionic liquid,reaction temperature,ultrasonic time,liquid-to-solid ratio,ionic liquid concentration,and enzyme-drug mass ratio as parameters.The optimal production process of ionic liquid combined with ultrasonic assisted enzyme extraction was determined by single factor combined response surface experiment.The optimal process for preparing curcumin nanoparticles by ionic crosslinking method was determined by single factor combined response surface experiment with acetic acid concentration,chitosan to sodium tripolyphosphate mass ratio,stirring rate,curcumin mass concentration,sodium tripolyphosphate mass concentration,and chitosan mass concentration as parameters,and drug encapsulation efficiency as response value.Curcumin nanoparticles were prepared under the optimal process,and the particle size,polydispersity index,Zata potential value,drug loading,stability,hemolysis rate,and antioxidant capacity in vivo and in vitro of the nanoparticles were detected.RESULTS AND CONCLUSION:(1)Among the five extraction methods,the curcumin yield of ionic liquid combined with ultrasound-assisted enzyme extraction was the highest,and this method was selected as the curcumin extraction method for subsequent experiments.The results of single factor combined response surface experiment showed that the optimal process for curcumin extraction was:ionic liquid selected 1-hexyl-3-methylimidazolium chloride,reaction temperature 55 ℃,liquid-to-solid ratio 40 mL/g,ultrasound time 57 minutes,ionic liquid concentration 57％,enzyme-drug mass ratio 3.5:10,and the obtained turmeric extraction yield was 3.10％.The optimal preparation process of curcumin nanoparticles was:glacial acetic acid concentration 0.5％,chitosan and sodium tripolyphosphate mass ratio 5.0:1,stirring speed 150 r/min,curcumin mass concentration 2.23 mg/mL,sodium tripolyphosphate mass concentration 1.45 mg/mL,chitosan mass concentration 3.63 mg/mL,and the obtained drug encapsulation efficiency was 90.61％.(2)The drug loading of curcumin nanoparticles was(14.49±0.23)％,the average particle size was(76.95±1.65)nm,the polydispersity coefficient was 0.15±0.02,and the Zata potential value was(32.37±1.46)mV.The curcumin nanoparticles had good stability and blood compatibility,did not induce hemolysis,and had stronger antioxidant capacity in vivo and in vitro than free curcumin.(3)The results show that the process optimization not only solves the problems of low extraction yield,poor solubility,and low bioavailability of curcumin,but also enhances its antioxidant activity in vivo and in vitro.

This article systematically reviews the current research status as well as diagnosis and treatment strategies of traditional Chinese medicine （TCM） for gastroesophageal reflux disease （GERD）. Studies demonstrate that TCM， based on the "disease-syndrome combination" approach， exhibits multi-target advantages in alleviating symptoms of various GERD subtypes， promoting mucosal repair， regulating emotions， and facilitating the reduction of western medication. To address clinical challenges such as symptom overlap and limited therapeutic efficacy， strategies have been proposed including "treating different diseases with the same method" and integrated regulation based on viscera correlation. Future efforts should focus on elucidating the mechanisms of compound prescriptions， promoting TCM drug development under the "three-combination" evaluation framework that integrates TCM theory， human experience and clinical trial evidence， and optimizing integrated traditional and western medicine models to enhance GERD management.

Objective: To understand the microclimate in primary and secondary school classrooms for the study period during the winter heating season, so as to provide a reference for the revision and improvement of relevant health standards. Methods: In December 2024, stratified random sampling was used to select 30 primary and secondary schools and 180 classrooms from the northern regions with centralized heating (Liaoning Province, Tianjin City) and the southern regions without centralized heating (Shanghai City, Anhui Province, and Jiangxi Province). Indoor temperature, relative humidity, wind speed, CO 2 and other indicators were measured on site. Variance analysis, t-test, Mann-Whitney U test and Kruskal-Wallis H test were used to analyze the differences in the microclimate of classrooms among regions and urban and rural differences. Results: The average temperature in the middle of the classrooms tested on site was (16.47±4.72)℃, and the variance analysis showed that the difference between the regions was statistically significant ( F=27.80, P <0.01). Among them, Tianjin had the highest average temperature of (20.43± 2.12 )℃, followed by Liaoning (19.03±2.23)℃, Shanghai (15.33±5.32)℃, Anhui (12.79±1.74)℃, and Jiangxi (11.69± 1.68 )℃. Horizontal temperature difference was 0.90 (0.50, 1.60)℃, the vertical temperature difference was 0.20 (0.10,0.60)℃, the average relative humidity was (44.39±16.16)%, the wind speed was 0.03(0.01,0.11)m/s, and the differences among different provinces and cities were statistically significant ( H/F =40.62, 82.69, 95.06, 55.28, all P <0.01). The average CO 2 volume concentration in urban areas of Tianjin, Liaoning, and Shanghai was 0.21(0.16,0.30)%, and there was no statistically significant difference ( H=4.65, P =0.10). There were grade differences in relative humidity ( F =3.71, 6.21) and CO 2 ( H =14.72, 12.92) in the north and the south (all P <0.05). In addition, the temperature, relative humidity, wind speed and CO 2 in the middle of the classroom were 42.8%, 67.8%, 100.0% and 22.2% respectively. Conclusions The temperature in the middle of the classroom in the non centralized heating area is lower than the standard, the relative humidity of classroom in the centralized heating area is lower than the standard，and the CO 2 in the classroom in winter is lower than the standard. It is recommended to install heating facilities in schools with low temperatures to increase the temperature and increase the frequency of ventilation in classrooms or adopt mechanical ventilation strategies to reduce CO 2 volume concentration.

Objective: To evaluate the current situation of thermal environment in primary and secondary school classrooms during winter, and to analyze students thermal comfort needs, so as to provide a basis for improving classroom thermal environment. Methods: From December 16 to 26, 2024, a stratified cluster random sampling method was used to select 90 classrooms from 15 primary and secondary schools in centralized/air conditioned heating areas(Liaoning Province, Tianjin City, Shanghai City) and naturally ventilated areas(Anhui Province and Jiangxi Province)for on site environmental measurement. A questionnaire survey was conducted among 743 students. The differences between groups using the χ 2 test were compared. Based on actual measurement data, a predicted mean vote prepared percentage of dissatisfied (PMV-PPD) model for centralized/air conditioned classrooms and an adaptive model for naturally ventilated classrooms were established, and the thermal neutral temperature and comfort interval were calculated. Results: The average outdoor temperature during on site measurement was 4.00(0.20，7.00)℃. In classrooms with centralized or air conditioned heating systems, the measured average temperature was (19.33±2.59)℃, with a thermal comfort range of 20.35-25.35 ℃ and a thermal neutral temperature of 22.85 ℃. And 13.92% of students reported feeling cold, while 80.80% felt comfortable. In classrooms with natural ventilation, the measured average temperature was (12.26±1.83)℃, with a thermal neutral temperature of 19.67 ℃ and a thermal comfort range of 16.17-23.17 ℃. About 48.33% of students reported feeling cold, and 49.81 % felt comfortable.The results of univariate analysis showed that there were statistically significant differences in shoe thickness, temperature sensation, relative humidity sensation and wind speed sensation between centralized/air conditioned heating areas ( χ 2= 7.01 , 31.47, 13.57, 13.80,all P <0.05). There were also statistically significant differences in school stage for primary and secondary school students, body mass index, classroom location for seat, temperature sensation, relative humidity sensation and wind speed sensation between naturally ventilated areas ( χ 2=42.13, 11.13, 11.04, 60.39, 29.27, 38.46,all P <0.05). Conclusions There are differences in thermal environment and students subjective thermal comfort in primary and secondary schools under different ventilation modes in winter. The temperature standards for heated classrooms should be revised, and differentiated environmental regulation strategies should be adopted based on different ventilation methods to improve students health and comfort levels.

ObjectiveTo systematically evaluate the content differences of 4 components in Leonuri Herba granules， reveal the quality fluctuation patterns of products from the same and different manufacturers， providing scientific basis for the optimization of production process and quality control. MethodsHigh performance liquid chromatography-diode array detector-charged aerosol detector（HPLC-DAD-CAD） was employed to determine the contents of 4 components（syringic acid， leonurine hydrochloride， ferulic acid， and stachydrine hydrochloride） in samples from 19 manufacturers（53 batches， 159 boxes）. Additionally， fingerprint profiles were constructed， and the fingerprint dissimilarity（P_S） and relative standard deviation（RSD） of different samples from the same manufacturer were calculated. A principal component analysis（PCA） model was established with P_S and the RSD values of the 4 components as variables to classify the manufacturers. Finally， samples from 5 manufacturers（M1-M5） covering three consistency groups were selected to calculate three quality consistency parameters， namely intra-batch consistency（P_A）， inter-batch consistency（P_B）， and P_S. Then， PCA was performed with P_A， P_B， and P_S of these 5 manufacturers as variables. ResultsThe average total content of the 4 index components per bag across the 19 manufacturers ranged from 41.10 mg to 97.54 mg. Among them， the content of stachydrine hydrochloride（a pharmacopoeial quality control component） was 32.46-72.70 mg per bag， all meeting the requirements of the 2025 edition of the Pharmacopoeia of the People's Republic of China， with RSD of 1.7%-17.1%. The content ranges of the other 3 components were as follows：syringic acid of 1.43-41.92 mg per bag， leonurine hydrochloride of 0.67-11.85 mg per bag， and ferulic acid of 0.11-3.81 mg per bag. Notably， leonurine hydrochloride exhibited the most significant content fluctuation among samples from the same manufacturer（RSD of 4.8%-59.2%）. PCA results showed that the 19 manufacturers could be classified into 3 categories. Samples from 8 manufacturers（M2， M6， M7， M8， M10， M15， M17， M18） demonstrated relatively high consistency， five manufacturers（M3， M9， M12， M13， M14） showed moderate consistency， six manufacturers（M1， M4， M5， M11， M16， M19） exhibited low consistency. The two methods yielded consistent classification results for the 5 representative manufacturers， verifying the reliability of the proposed method. Among these， manufacturer M2 showed the best quality consistency and the highest total content of indicator components among M1-M5. ConclusionThe HPLC-DAD-CAD multi-detector hyphenation technology established in this study enables the accurate detection of 4 components in Leonuri Herba granules. Significant differences in the total content of these four components are observed among products from 19 manufacturers. The application of 2 consistency evaluation methods combined with PCA can effectively classify their consistency into 3 categories， and the classification results of the 2 methods are highly consistent. This study provides scientific basis for the process optimization and quality standard improvement of Leonuri Herba granules.

ObjectiveTo systematically evaluate the content differences of 4 components in Leonuri Herba granules， reveal the quality fluctuation patterns of products from the same and different manufacturers， providing scientific basis for the optimization of production process and quality control. MethodsHigh performance liquid chromatography-diode array detector-charged aerosol detector（HPLC-DAD-CAD） was employed to determine the contents of 4 components（syringic acid， leonurine hydrochloride， ferulic acid， and stachydrine hydrochloride） in samples from 19 manufacturers（53 batches， 159 boxes）. Additionally， fingerprint profiles were constructed， and the fingerprint dissimilarity（P_S） and relative standard deviation（RSD） of different samples from the same manufacturer were calculated. A principal component analysis（PCA） model was established with P_S and the RSD values of the 4 components as variables to classify the manufacturers. Finally， samples from 5 manufacturers（M1-M5） covering three consistency groups were selected to calculate three quality consistency parameters， namely intra-batch consistency（P_A）， inter-batch consistency（P_B）， and P_S. Then， PCA was performed with P_A， P_B， and P_S of these 5 manufacturers as variables. ResultsThe average total content of the 4 index components per bag across the 19 manufacturers ranged from 41.10 mg to 97.54 mg. Among them， the content of stachydrine hydrochloride（a pharmacopoeial quality control component） was 32.46-72.70 mg per bag， all meeting the requirements of the 2025 edition of the Pharmacopoeia of the People's Republic of China， with RSD of 1.7%-17.1%. The content ranges of the other 3 components were as follows：syringic acid of 1.43-41.92 mg per bag， leonurine hydrochloride of 0.67-11.85 mg per bag， and ferulic acid of 0.11-3.81 mg per bag. Notably， leonurine hydrochloride exhibited the most significant content fluctuation among samples from the same manufacturer（RSD of 4.8%-59.2%）. PCA results showed that the 19 manufacturers could be classified into 3 categories. Samples from 8 manufacturers（M2， M6， M7， M8， M10， M15， M17， M18） demonstrated relatively high consistency， five manufacturers（M3， M9， M12， M13， M14） showed moderate consistency， six manufacturers（M1， M4， M5， M11， M16， M19） exhibited low consistency. The two methods yielded consistent classification results for the 5 representative manufacturers， verifying the reliability of the proposed method. Among these， manufacturer M2 showed the best quality consistency and the highest total content of indicator components among M1-M5. ConclusionThe HPLC-DAD-CAD multi-detector hyphenation technology established in this study enables the accurate detection of 4 components in Leonuri Herba granules. Significant differences in the total content of these four components are observed among products from 19 manufacturers. The application of 2 consistency evaluation methods combined with PCA can effectively classify their consistency into 3 categories， and the classification results of the 2 methods are highly consistent. This study provides scientific basis for the process optimization and quality standard improvement of Leonuri Herba granules.

Objective To explore the feasibility of using high-definition thoracoscopy to identify sympathetic ganglia during thoracic sympathicotomy for primary palmar hyperhidrosis. Methods The clinical data of patients with primary palmar hyperhidrosis who underwent high-definition thoracoscopic sympathicotomy in Taikang Xianlin Drum Tower Hospital from June to July 2023 were retrospectively analyzed. Intraoperative visualization rates and anatomical variations of sympathetic ganglia were recorded, and the consistency between white-light thoracoscopy and near-infrared fluorescence imaging was compared. Additionally, surgical videos from previous fluorescence-guided procedures were reviewed. Results Finally 100 patients were collected, including 54 females and 46 males, with an average age of (21.92±6.56) years. All patients underwent endoscopic thoracic sympathicotomy at R3 level. The overall intraoperative ganglion visualization rate was 92.5% (740/800), with G2-G5 rates of 95.5% (191/200), 94.0% (188/200), 94.0% (188/200), and 86.5% (173/200), respectively. Ganglion variations occurred in 32.0% (237/740), predominantly at G3 (29.8%) and G4 (42.6%). In 5 indocyanine green-enhanced patients, the concordance rate between white-light and near-infrared fluorescence imaging was 100.0% (38/38). Video analysis of 14 near-infrared fluorescence-guided surgeries demonstrated a 99.1% (107/108) consistency rate. Postoperative palmar hyperhidrosis improvement reached 100.0% (100/100) with no Horner’s syndrome. Conclusion With the wide clinical application of high-definition thoracoscopy, accurate thoracic sympathicotomy has the feasibility of clinical application.

Objective To analyze the newly reported HIV-1 infection in several prefectures of Hubei Province，and analyze its influencing factors. Methods The limiting antigen avidity enzyme immunoassay(LAg-avidity EIA,LAg) was conducted on HIV-1 positive samples confirmed by Western blot of Hubei in 2017-2022. The demographic characteristics of the newly infected samples were analyzed by χ2 test.Logistic regression model was used to analyze influencing factors of new infection rate and predict the factors associated with the HIV-1 recent infection. Results There were 403 new cases of HIV-1 from 2017 to 2022 in several prefectures of Hubei Province, of which 77 were newly infected sorted by LAg,with a new infection rate of 19.11%. The newly confirmed HIV-1 persons of whom aged ≤24 years (40.00% new infection ratio), unmarried (29.41%), college or above (31.37%), and from Voluntary counseling and testing testing(VCT) clinics (40.00%) had a higher proportion of new infections, and the difference was statistically significant. Multivariate Logistic regression analysis showed that age ≤24 years old (aOR=4.346,95%CI: 1.342-14.075) and screening from the VCT clinic (aOR=6.761,95%CI: 1.460-31.319) were more likely to be newly infected. Conclusion The proportion of new HIV infection in several prefectures of Hubei province is relatively low in recent years.Further effective publicity and intervention measures for young students and the construction of VCT clinic should be continuously promoted to achieve early diagnosis and treatment.

OBJECTIVE To evaluate the efficacy and safety of total glucosides of paeonia （TGP） in the treatment of systemic lupus erythematosus （SLE）. METHODS Randomized controlled trial （RCT） about TGP combined with western medicine versus western medicine alone for SLE treatment were retrieved from PubMed， Embase， Cochrane Library， Web of Science， CNKI， VIP， Wanfang Data， and CBM. The search period spanned from the inception of each database to June 1， 2025. After literature screening， data extraction， and quality assessment of the included studies， Meta-analysis was performed using RevMan 5.4 software. RESULTS Fifteen RCTs， involving 1 318 patients， were included. Meta-analysis results showed that compared with western medicine alone， TGP combined with western medicine significantly improved clinical efficacy [OR＝4.96， 95%CI（3.41， 7.23）， P＜0.000 01]， complement 3 [MD＝0.18， 95%CI （0.13， 0.23）， P＜0.000 01] and complement 4[MD＝0.08， 般021） 95%CI （0.04， 0.11）， P＜0.000 01]， and reduced the levels of immunoglobulin G （IgG） [MD＝－3.10， 95%CI （－3.59，－2.62）， P＜0.000 01]， IgA [MD＝－0.68， 95%CI （－0.78， －0.58）， P＜0.000 01]， IgM [MD＝－0.43， 95%CI （－0.53，－0.34）， P＜0.000 01]， systemic lupus erythematosus disease activity index （SLEDAI） [MD＝－1.59， 95%CI （－2.20， －0.99）， P＜0.000 01]， recurrence rate [OR＝0.23， 95%CI （0.13， 0.42）， P＜0.000 01] and the incidence of adverse drug reactions [OR＝ 0.54， 95%CI （0.36， 0.82）， P＝0.004]. CONCLUSIONS TGP therapy can improve clinical efficacy of SLE patients， promote the restoration of immunoglobulins and complements， reduce SLEDAI and recurrence rate and has good safety.

Objective To analyze Chinese and English publications pertaining to Oncomelania hupensis control from 2005 to 2024, so as to decipher the research status and hotspots of O. hupensis control. Methods Chinese and English publications pertaining to O. hupensis control from 2005 to 2024 were retrieved in the Web of Science Core Collection Database and China National Knowledge Infrastructure. The annual number of publications was analyzed from 2005 to 2024, and the author and institution cooperation networks were mapped using the software CiteSpace 6.3.1. Keywords were extracted from publications to map the co-occurrence, burst and timeline of keywords to identify the research hotspots of O. hupensis control. Results A total of 158 English publications and 771 Chinese publications were included for bibliometric analyses. The overall output of English publications was relatively small from 2005 to 2024, the annual average publication was 7.90 publications. Parasites & Vectors was the most productive journal by the number of publications (21 publications). The three most productive authors included Li Shizhu (24 publications), Zhou Xiaonong (13 publications), and Yang Kun (12 publications), and the three most productive institutions included Chinese Center for Disease Control and Prevention (49 publications), the WHO (27 publications), and Fudan University (25 publications). The annual average number of Chinese publications was high from 2005 to 2015 (57.73 publications), and reduced to 15.11 publications during the period from 2016 to 2024, with Chinese Journal of Schistosomiasis Control as the most productive journal (241 publications). The three most productive authors included Wang Wanxian (18 publications), Sun Qixiang (16 publications), and Dai Jianrong (16 publications), and the three most productive institutions included Jiangsu Institute of Parasitic Diseases (55 publications), Chinese Center for Disease Control and Prevention (47 publications), and Hubei Uni-versity (38 publications). Among the 158 English publications, molluscicidal effect, climate change, geographic information, biological control, machine learning were current research hotspots, and the Yangtze River and elimination were emerging research hotspots. Among the 771 Chinese publications, molluscicidal effect, niclosamide, comprehensive management, molluscicide, effectiveness evaluation, marshland, and endophyte were current research hotspots, and the future research hotspots shifted to molluscicidal effect and pyriclobenzuron. Conclusions Limited attention is paid to the research on O. hupensis control across the world. The Yangtze River, elimination, molluscicidal effect, and pyriclobenzuron may be future research hotspots. High attention is recommended to be paid to the research on O. hupensis control, and development of diverse approaches for O. hupensis control is of urgent needs. We should continue to attach importance to the control research of O. hupensis and strengthen the exploration of diverse snail extermination and control methods.