PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Background: The rarity and complexity of trans-ulnar basal coronoid fracture-dislocations pose significant challenges in treatment. This study aimed to categorize these fractures based on coronoid fracture patterns and propose tailored surgical approaches for each type. Additionally, we evaluated the functional and radiological outcomes among the patients managed using our treatment algorithm. Methods: A total of 19 patients who underwent open reduction and internal fixation for trans-ulnar basal coronoid fracture-dislocations between March 2018 and October 2022 were enrolled in this study. These patients were classified based on the coronoid fracture patterns associated with olecranon fractures: type 1 involved anteromedial facet (AMF) fractures, type 2 encompassed coronoid base and body fractures, and type 3 involved a combination of types 1 and 2. We made a midline longitudinal dorsal incision to facilitate the provisional fixation of the olecranon fragment to the distal metaphysis using a locking plate. Subsequently, we employed the over-the-top (type 1) and Taylor–Scham (type 3) approaches for direct coronoid process fixation with buttress plating.Type 2 fractures were approached via medial fascial exposure from the posterior ulnar cortex or through the olecranon fractures, and subsequently fixed with miniplates and screws. Bony union and joint articulation were assessed via plain radiographs, and functional outcomes were evaluated using range of motion and the Mayo Elbow Performance Score. Results: Among the 19 patients, 3 had type 1 fractures, 14 had type 2 fractures, and 2 had type 3 fractures. All fractures exhibited solid osseous union without subluxation or dislocation. The average flexion and extension arc was 119.47° ± 20.88°, with a mean flexion of 127.37° ± 13.37° and an average flexion contracture of 7.89° ± 10.04°. The average Mayo Elbow Performance Score was 82.63 ± 12.51 points. Qualitatively, patient outcomes were excellent in 5 patients, good in 9, and fair in 5. Conclusions Most of our patients presented with easily approachable coronoid base and body fractures. However, in AMF fractures of the coronoid process, a direct medial approach is required for buttress plating. We believe our study helps provide useful guidelines for making appropriate decisions in trans-ulnar basal coronoid fracture-dislocations .

Background: s/Aims: We compared the postoperative outcomes of single-incision laparoscopic cholecystectomy (SILC) with those of single-incision robotic cholecystectomy (SIRC) using the da Vinci Xi and SP systems. Methods: We retrospectively analyzed data from 206 patients who underwent these procedures by a single surgeon between August 2020 and April 2022. Propensity score matching was used to adjust for confounders and evaluate outcomes. Results: SILC exhibited shorter operation times compared to SIRC with Xi and SP (44.9 ± 14.5 min vs. 55.3 ± 12.2 min vs. 55.2 ± 16.2 min, p < 0.001). SIRC with Xi had shorter docking times (6.2 ± 2.8 min vs. 10.3 ± 2.3 min, p < 0.001), while SIRC with SP demonstrated reduced console times (11.2 ± 2.4 min vs. 18.6 ± 8.0 min, p < 0.001). Pain scores and complications did not significantly differ between the groups. Conclusions Both SILC and SIRC showed comparable outcomes, with the SP system providing advantages such as reduced console time and fully articulated arms, likely reducing surgeon stress.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Purpose: We report a case of bilateral nasal and temporal four-site scleromalacia following cosmetic conjunctivectomy, successfully managed with simultaneous restoration surgery at all four sites using autologous tragal perichondrium and preserved scleral graft.Case summary: A 56-year-old woman who underwent cosmetic conjunctivectomy on both eyes 15 years earlier, presented with intermittent eye pain. Examination revealed scleromalacia with calcium plaques in all four nasal and temporal scleral areas. The most extensive avascular area was in the nasal region of the right eye, and the most prominent uveal exposure was in the nasal area of the left eye. Considering the lesion and exposure sizes of the avascular zone and uvea exposure, preserved sclera was transplanted to the temporal and nasal areas of the right eye, while autologous tragal perichondrium was transplanted to the nasal area of the left eye. Tenon's capsule vessels were fixed with pedicle flaps in all four surgical areas for vascularization. Frozen amniotic membrane was transplanted in the nasal area of the left eye, where the conjunctival defect was substantial, and in the lateral area of the left eye, where no graft was used. The conjunctival epithelium was closed using autologous conjunctival flaps in all four areas. Post-surgery, successful engraftment and vascularization of the graft materials were observed in both eyes. Conclusions Even with multiple areas of scleromalacia in both eyes, successful results can be achieved during simultaneous surgery if an appropriate graft material is selected and the surgery is performed utilizing principles of tissue restoration.

Background: and Purpose Treatments for neuromyelitis optica spectrum disorder (NMOSD) such as eculizumab, ravulizumab, satralizumab, and inebilizumab have significantly advanced relapse prevention, but they remain expensive. Rituximab is an off-label yet popular alternative that offers a cost-effective solution, but its real-world efficacy needs better quantification for guiding the application of newer approved NMOSD treatments (ANTs). This study aimed to determine real-world rituximab failure rates to anticipate the demand for ANTs and aid in resource allocation. Methods: We conducted a nationwide retrospective study involving 605 aquaporin-4-antibody-positive NMOSD patients from 22 centers in South Korea that assessed the efficacy and safety of rituximab over a median follow-up of 47 months. Results: The 605 patients treated with rituximab included 525 (87%) who received continuous therapy throughout the follow-up period (median=47 months, interquartile range=15–87 months). During this period, 117 patients (19%) experienced at least 1 relapse. Notably, 68 of these patients (11% of the total cohort) experienced multiple relapses or at least 1 severe relapse.Additionally, 2% of the patients discontinued rituximab due to adverse events, which included severe infusion reactions, neutropenia, and infections. Conclusions This study has confirmed the efficacy of rituximab in treating NMOSD, as evidenced by an 87% continuation rate among patients over a 4-year follow-up period. Nevertheless, the occurrence of at least one relapse in 19% of the cohort, including 11% who experienced multiple or severe relapses, and a 2% discontinuation rate due to adverse events highlight the urgent need for alternative therapeutic options.

Background: The rarity and complexity of trans-ulnar basal coronoid fracture-dislocations pose significant challenges in treatment. This study aimed to categorize these fractures based on coronoid fracture patterns and propose tailored surgical approaches for each type. Additionally, we evaluated the functional and radiological outcomes among the patients managed using our treatment algorithm. Methods: A total of 19 patients who underwent open reduction and internal fixation for trans-ulnar basal coronoid fracture-dislocations between March 2018 and October 2022 were enrolled in this study. These patients were classified based on the coronoid fracture patterns associated with olecranon fractures: type 1 involved anteromedial facet (AMF) fractures, type 2 encompassed coronoid base and body fractures, and type 3 involved a combination of types 1 and 2. We made a midline longitudinal dorsal incision to facilitate the provisional fixation of the olecranon fragment to the distal metaphysis using a locking plate. Subsequently, we employed the over-the-top (type 1) and Taylor–Scham (type 3) approaches for direct coronoid process fixation with buttress plating.Type 2 fractures were approached via medial fascial exposure from the posterior ulnar cortex or through the olecranon fractures, and subsequently fixed with miniplates and screws. Bony union and joint articulation were assessed via plain radiographs, and functional outcomes were evaluated using range of motion and the Mayo Elbow Performance Score. Results: Among the 19 patients, 3 had type 1 fractures, 14 had type 2 fractures, and 2 had type 3 fractures. All fractures exhibited solid osseous union without subluxation or dislocation. The average flexion and extension arc was 119.47° ± 20.88°, with a mean flexion of 127.37° ± 13.37° and an average flexion contracture of 7.89° ± 10.04°. The average Mayo Elbow Performance Score was 82.63 ± 12.51 points. Qualitatively, patient outcomes were excellent in 5 patients, good in 9, and fair in 5. Conclusions Most of our patients presented with easily approachable coronoid base and body fractures. However, in AMF fractures of the coronoid process, a direct medial approach is required for buttress plating. We believe our study helps provide useful guidelines for making appropriate decisions in trans-ulnar basal coronoid fracture-dislocations .

Background: s/Aims: We compared the postoperative outcomes of single-incision laparoscopic cholecystectomy (SILC) with those of single-incision robotic cholecystectomy (SIRC) using the da Vinci Xi and SP systems. Methods: We retrospectively analyzed data from 206 patients who underwent these procedures by a single surgeon between August 2020 and April 2022. Propensity score matching was used to adjust for confounders and evaluate outcomes. Results: SILC exhibited shorter operation times compared to SIRC with Xi and SP (44.9 ± 14.5 min vs. 55.3 ± 12.2 min vs. 55.2 ± 16.2 min, p < 0.001). SIRC with Xi had shorter docking times (6.2 ± 2.8 min vs. 10.3 ± 2.3 min, p < 0.001), while SIRC with SP demonstrated reduced console times (11.2 ± 2.4 min vs. 18.6 ± 8.0 min, p < 0.001). Pain scores and complications did not significantly differ between the groups. Conclusions Both SILC and SIRC showed comparable outcomes, with the SP system providing advantages such as reduced console time and fully articulated arms, likely reducing surgeon stress.

Background: The rarity and complexity of trans-ulnar basal coronoid fracture-dislocations pose significant challenges in treatment. This study aimed to categorize these fractures based on coronoid fracture patterns and propose tailored surgical approaches for each type. Additionally, we evaluated the functional and radiological outcomes among the patients managed using our treatment algorithm. Methods: A total of 19 patients who underwent open reduction and internal fixation for trans-ulnar basal coronoid fracture-dislocations between March 2018 and October 2022 were enrolled in this study. These patients were classified based on the coronoid fracture patterns associated with olecranon fractures: type 1 involved anteromedial facet (AMF) fractures, type 2 encompassed coronoid base and body fractures, and type 3 involved a combination of types 1 and 2. We made a midline longitudinal dorsal incision to facilitate the provisional fixation of the olecranon fragment to the distal metaphysis using a locking plate. Subsequently, we employed the over-the-top (type 1) and Taylor–Scham (type 3) approaches for direct coronoid process fixation with buttress plating.Type 2 fractures were approached via medial fascial exposure from the posterior ulnar cortex or through the olecranon fractures, and subsequently fixed with miniplates and screws. Bony union and joint articulation were assessed via plain radiographs, and functional outcomes were evaluated using range of motion and the Mayo Elbow Performance Score. Results: Among the 19 patients, 3 had type 1 fractures, 14 had type 2 fractures, and 2 had type 3 fractures. All fractures exhibited solid osseous union without subluxation or dislocation. The average flexion and extension arc was 119.47° ± 20.88°, with a mean flexion of 127.37° ± 13.37° and an average flexion contracture of 7.89° ± 10.04°. The average Mayo Elbow Performance Score was 82.63 ± 12.51 points. Qualitatively, patient outcomes were excellent in 5 patients, good in 9, and fair in 5. Conclusions Most of our patients presented with easily approachable coronoid base and body fractures. However, in AMF fractures of the coronoid process, a direct medial approach is required for buttress plating. We believe our study helps provide useful guidelines for making appropriate decisions in trans-ulnar basal coronoid fracture-dislocations .