ObjectiveTo investigate the clinical application value of thromboelastographic parameters in assessing coagulation function by analyzing the thromboelastographic features of patients with primary liver cancer （PLC）， and to provide a basis for coagulation management and prognostic evaluation in liver cancer patients. MethodsA retrospective analysis was performed for 1 253 PLC patients who were admitted to The First Affiliated Hospital of Xi’an Jiaotong University from May 2015 to December 2022. According to the presence or absence of cirrhosis， the patients were divided into non-cirrhosis group with 262 patients and cirrhosis group with 991 patients， and according to the presence or absence of HBV infection， they were divided into HBV infection group with 1 055 patients and non-HBV infection group with 198 patients. The patients were stratified based on the severity of liver cirrhosis （Child-Pugh class and MELD score） and liver reserve function （indocyanine green retention rate at 15 minutes ［ICGR15］）， and thromboelastography was used to measure thromboelastographic parameters （reaction time ［R］， coagulation formation time ［K］， α-angle， maximum thrombosis amplitude ［MA］， and coagulation composite index ［CI］） and conventional coagulation markers. The t-test was used for comparison of normally distributed continuous data between two groups； a one-way analysis of variance was used for comparison between multiple groups， and the least significant difference t-test was used for further comparison between two groups. The Mann-Whitney U test was used for comparison of non-normally distributed continuous data between two groups； the Kruskal-Wallis H test was used for comparison between multiple groups， and the Bonferroni correction method was used for further comparison between two groups. The chi-square test was used for comparison of categorical data between grouips， and the Spearman test was used for correlation analysis. ResultsAmong the 991 patients in the cirrhosis group， 826 had Child-Pugh class A （5 — 6 points）， and 165 had Child-Pugh class B （7 — 9 points）； 812 had an MELD score of <10， and 179 had an MELD score of ≥10； 679 had an ICGR15 of <10%， and 294 had an ICGR15 of ≥10%. Compared with the patients with Child-Pugh class A， the patients with Child-Pugh class B had a significantly longer K time and significant reductions in α-angle， MA， and CI （all P <0.001）； compared with the MELD score <10 group， the MELD score ≥10 group had a significantly longer K time and significant reductions in α-angle， MA， and CI （all P<0.001）； compared with the ICGR15 <10% group， the ICGR15 ≥10% group had a significantly longer K time and a significant reduction in MA （both P <0.001）. Among the 1 253 patients， MA was strongly positively correlated with fibrinogen and platelet count （r=0.675 and 0.667， both P<0.001）； The MA had a weak correlation with Child-Pugh score， MELD score， and ICGR15 （r=-0.112， -0.250， and -0.117， all P<0.001）， while the K time，α-angle and CI were weakly correlated with the MELD score （r=0.222， -0.184， and -0.183， all P<0.001），R time was negatively correlated with ICGR15 （r=-0.080， P=0.005）. The HBV infection group had significantly higher MA and CI than the non-HBV infection group （P<0.05）. ConclusionThromboelastography can sensitively identify the hypocoagulable state associated with the progression of liver cirrhosis and the hypercoagulable tendency in HBV-related liver cancer， which provides an important reference for individualized anticoagulant therapy in clinical practice.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Aim To investigate the effect of safflower yellow (SY) on learning and memory ability of APP/ PS1 mice at different disease stages, and to explore the mechanism of SY anti- Alzheimer's disease by using 3-,6- and 9-month-old APP/PS 1 transgenic mice as experimental animal models. Methods Behavioral experiments were conducted to observe the effects of SY on learning and memory of APP/PS1 mice of different months. ELISA was used to detect the effect of SY on the expression of inflammatory factors in cortex of mice of different months. Western blot was used to detect the microglia activation marker protein, and its mechanism of action was further analyzed. Results SY could enhance the learning and memory ability of mice aged 3, 6 and 9 months, reduce the content of IL-6 and increase the content of TGF-β1 in brain tissue, up-regulate the expression levels of arginase-1 (arg-1) and triggering receptor expressed on myeloid cells 2 (tREM2) in brain tissue of mice of different months, and down-regulate the expression levels of inducible nitric oxide synthase (iNOS), Toll-like receptors 4 (tlr4) and nuclear factor-kappa B (nf-KB). Conclusions Compared with 3- and 9-month-old mice, SY is the most effective in improving learning memory in 6-month-old APP/PS1 mice. SY inhibits TLR4/NF-KB pathway activation by inducing TREM2 expression in brain tissue of APP/PS 1 transgenic mice, promotes microglia phenotype shift to anti-inflammatory phenotype, reduces chronic neuroinflammatory response, and improves learning memory in APP/PS1 mice at all months of age.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Effect of amantadine dimer adjuvant on humoral immune response induced by SARS-CoV-2 protein vaccine in mice Objective To investigate the effect of amantadine dimer adjuvant on humoral immune response induced by SARS-CoV-2 crown protein vaccine in mice.Methods The amantadine dimer was synthesized by substitution reaction ligation,hydrolytic acidification reaction ligation and amide condensation reaction ligation,with which as adjuvant,female BALB/c mice were immunized with the receptor-binding domain(RBD).The mice were randomly divided into five groups,six for each as follows:R6A+RBD group[21 μg(0.033 μmol)amantadine dimer+10 μg RBD],Ada+RBD group[10 μg(0.066 μmol)amantadine+10 μg RBD],Alu+RBD group(35 μg aluminum adjuvant+10 μg RBD),RBD group(10 μg RBD)and Blank group(0.9% normal saline),which were immunized i.m.on day 0,14 and 28 respectively.Serum samples were collected from tail vein of mice 7 d after the second dose and 14 d after the last dose and determined for specific IgG antibody levels by ELISA.Results The amantadine dimer was purified by thin layer chromatography(TLC)and identified by electrospray ionization-MS(ESI-MS)positive/negative ion mode.After two times of immunization,the antibody levels in sera at various dilutions of mice in R6A+RBD group were all higher than those of Ada+RBD group,while lower than those of Alu+RBD group.However,after three times of immunization,the antibody levels in sera at various dilutions of mice in R6A+RBD group were all significantly higher than those of Ada+RBD and Alu+RBD groups(each F > 30,each P < 0.000 1 and each P < 0.01).Conclusion Amantadine dimer adjuvant enhanced humoral immune response induced by SARS-CoV-2 protein vaccine in mice with good adjuvant effect,which may be used as an alternative adjuvant.This strategy based on existing drug transformation provided a new idea for the development of novel adjuvants.

Objective: To identify the main metals involved in cognitive impairment in the Chinese oldest old, and explore the association between these metal exposures and cognitive impairment. Methods: A cross-sectional study was conducted on 1 568 participants aged 80 years and older from Healthy Aging and Biomarkers Cohort Study (2017 to 2018). Fasting venous blood was collected to measure the levels of nine metals (selenium, lead, cadmium, arsenic, antimony, chromium, manganese, mercury, and nickel). The cognitive function of these participants was evaluated by using the Chinese version of the Mini-Mental State Examination (CMMSE). The random forest (RF) was applied to independently identify the main metals that affected cognitive impairment. The multivariate logistic regression model and restricted cubic splines (RCS) model were used to further verify the association of the main metals with cognitive impairment. Results: The age of 1 568 study subjects was (91.8±7.6) years old, including 912 females (58.2%) and 465 individuals (29.7%) with cognitive function impairment. Based on the RF model (the out-of-bag error rate was 22.9%), the importance ranking of variables was conducted and the feature screening of five times ten-fold cross-validation was carried out. It was found that selenium was the metal that affected cognitive function impairment, and the other eight metals were not included in the model. After adjusting for covariates, the multivariate logistic regression model showed that with every increase of 10 μg/L of blood selenium levels, the risk of cognitive impairment decreased (OR=0.921, 95%CI: 0.889-0.954). Compared with the lowest quartile(Q₁) of blood selenium, the ORs (95%CI) of Q₃ and Q₄ blood selenium were 0.452 (0.304-0.669) and 0.419 (0.281-0.622) respectively. The RCS showed a linear dose-response relationship between blood selenium and cognitive impairment (P_nonlinear>0.05). Conclusion: Blood selenium is negatively associated with cognitive impairment in the Chinese oldest old.
Aged, 80 and over ; Female ; Humans ; Selenium ; Cohort Studies ; Cross-Sectional Studies ; Metals/analysis* ; Cognitive Dysfunction/epidemiology* ; China/epidemiology*

Child ; Humans ; Acquired Immunodeficiency Syndrome/drug therapy* ; Retrospective Studies ; Anti-Retroviral Agents/therapeutic use* ; HIV Infections/epidemiology* ; China/epidemiology* ; Anti-HIV Agents/therapeutic use*