ObjectiveThis study leverages structural data from antigen-antibody complexes of the influenza A virus neuraminidase (NA) protein to investigate the spatial recognition relationship between the antigenic epitopes and antibody paratopes. MethodsStructural data on NA protein antigen-antibody complexes were comprehensively collected from the SAbDab database, and processed to obtain the amino acid sequences and spatial distribution information on antigenic epitopes and corresponding antibody paratopes. Statistical analysis was conducted on the antibody sequences, frequency of use of genes, amino acid preferences, and the lengths of complementarity determining regions (CDR). Epitope hotspots for antibody binding were analyzed, and the spatial structural similarity of antibody paratopes was calculated and subjected to clustering, which allowed for a comprehensively exploration of the spatial recognition relationship between antigenic epitopes and antibodies. The specificity of antibodies targeting different antigenic epitope clusters was further validated through bio-layer interferometry (BLI) experiments. ResultsThe collected data revealed that the antigen-antibody complex structure data of influenza A virus NA protein in SAbDab database were mainly from H3N2, H7N9 and H1N1 subtypes. The hotspot regions of antigen epitopes were primarily located around the catalytic active site. The antibodies used for structural analysis were primarily derived from human and murine sources. Among murine antibodies, the most frequently used V-J gene combination was IGHV1-12*01/IGHJ2*01, while for human antibodies, the most common combination was IGHV1-69*01/IGHJ6*01. There were significant differences in the lengths and usage preferences of heavy chain CDR amino acids between antibodies that bind within the catalytic active site and those that bind to regions outside the catalytic active site. The results revealed that structurally similar antibodies could recognize the same epitopes, indicating a specific spatial recognition between antibody and antigen epitopes. Structural overlap in the binding regions was observed for antibodies with similar paratope structures, and the competitive binding of these antibodies to the epitope was confirmed through BLI experiments. ConclusionThe antigen epitopes of NA protein mainly ditributed around the catalytic active site and its surrounding loops. Spatial complementarity and electrostatic interactions play crucial roles in the recognition and binding of antibodies to antigenic epitopes in the catalytic region. There existed a spatial recognition relationship between antigens and antibodies that was independent of the uniqueness of antibody sequences, which means that antibodies with different sequences could potentially form similar local spatial structures and recognize the same epitopes.

Electroencephalogram (EEG) is a non-invasive, high temporal-resolution technique for monitoring brain activity. However, affected by the volume conduction effect, EEG has a low spatial resolution and is difficult to locate brain neuronal activity precisely. The surface Laplacian (SL) technique obtains the Laplacian EEG (LEEG) by estimating the second-order spatial derivative of the scalp potential. LEEG can reflect the radial current activity under the scalp, with positive values indicating current flow from the brain to the scalp (“source”) and negative values indicating current flow from the scalp to the brain (“sink”). It attenuates signals from volume conduction, effectively improving the spatial resolution of EEG, and is expected to contribute to breakthroughs in neural engineering. This paper provides a systematic overview of the principles and development of SL technology. Currently, there are two implementation paths for SL technology: current source density algorithms (CSD) and concentric ring electrodes (CRE). CSD performs the Laplace transform of the EEG signals acquired by conventional disc electrodes to indirectly estimate the LEEG. It can be mainly classified into local methods, global methods, and realistic Laplacian methods. The global method is the most commonly used approach in CSD, which can achieve more accurate estimation compared with the local method, and it does not require additional imaging equipment compared with the realistic Laplacian method. CRE employs new concentric ring electrodes instead of the traditional disc electrodes, and measures the LEEG directly by differential acquisition of the multi-ring signals. Depending on the structure, it can be divided into bipolar CRE, quasi-bipolar CRE, tripolar CRE, and multi-pole CRE. The tripolar CRE is widely used due to its optimal detection performance. While ensuring the quality of signal acquisition, the complexity of its preamplifier is relatively acceptable. Here, this paper introduces the study of the SL technique in resting rhythms, visual-related potentials, movement-related potentials, and sensorimotor rhythms. These studies demonstrate that SL technology can improve signal quality and enhance signal characteristics, confirming its potential applications in neuroscientific research, disease diagnosis, visual pathway detection, and brain-computer interfaces. CSD is frequently utilized in applications such as neuroscientific research and disease detection, where high-precision estimation of LEEG is required. And CRE tends to be used in brain-computer interfaces, that have stringent requirements for real-time data processing. Finally, this paper summarizes the strengths and weaknesses of SL technology and envisages its future development. SL technology boasts advantages such as reference independence, high spatial resolution, high temporal resolution, enhanced source connectivity analysis, and noise suppression. However, it also has shortcomings that can be further improved. Theoretically, simulation experiments should be conducted to investigate the theoretical characteristics of SL technology. For CSD methods, the algorithm needs to be optimized to improve the precision of LEEG estimation, reduce dependence on the number of channels, and decrease computational complexity and time consumption. For CRE methods, the electrodes need to be designed with appropriate structures and sizes, and the low-noise, high common-mode rejection ratio preamplifier should be developed. We hope that this paper can promote the in-depth research and wide application of SL technology.

Objective To explore the effect of cardiac shock wave therapy(CSWT)on ST deviation of electrocardiogram and myocardial perfusion imaging in coronary artery disease(CAD)patients.Methods CAD patients who received CSWT in Cardiology Department of Beijing Hospital from December 2016 to August 2022 were enrolled.Three months of CSWT were conducted with a total of 9 times shock wave treatment.Clinical data,myocardial perfusion imaging data and stress electrocardiogram data were collected.Myocardial perfusion score,electrocardiographic data were compared before and after CSWT.Results A total of 55 patients were finally enrolled.There were 43 male and 12 female patients with an average age of(67.45±8.96)years old.ST deviation on 12 leads of electrocardiogram did not show significant difference before and after CSWT.Myocardial perfusion imaging showed global stress perfusion score(P=0.031)and reverse perfusion score(P=0.024).Global rest ischemia score reduced after CSWT(P=0.034).Target stress perfusion score(P=0.002),target reverse perfusion score(P=0.002),target reverse ischemic area(P=0.001)were improved after CSWT.Conclusions CSWT may not influence ST deviation of electrocardiogram,but may improve myocardial ischemia in CAD patients,

In the field of dental aesthetics,digital aesthetic design plays a crucial role in helping dentists to predict treatment outcomes vis-ually,as well as in enhancing the consistency of knowledge and understanding of aesthetic goals between dentists and patients.It serves as the foundation for achieving ideal aesthetic effects.However,there is no clear standard for this digital process currently in China and abroad.Many dentists lack of systematic understanding of how to carry out digital aesthetic design for treatment.To establish standardized processes for dental aesthetic design and to improve the homogeneity of treatment outcomes,Chinese Society of Digital Dental Industry(CSD-DI)convened domestic experts in related field to compile this consensus.This article elaborates on the key aspects of digital aesthetic data collection,integration steps,and the digital aesthetic design process.It also formulates a decision tree for dental aesthetics at macro level and outlines corresponding workflows for various clinical scenarios,serving as a reference for clinicians.

DNA origami is a powerful technique for generating nanostructures with dynamic properties and intelligent controllability. The precise geometric shapes, high programmability, and excellent biocompatibility make DNA origami nanostructures an emerging drug delivery vehicle. The shape, size of the carrier material, as well as the loading and release of drugs are important factors affecting the bioavailability of drugs. This paper focuses on the controllable design of DNA origami nanostructures, efficient drug loading, and intelligent drug release. It summarizes the cutting-edge applications of DNA origami technology in biomedicine, and discusses areas where researchers can contribute to further advancing the clinical application of DNA origami carriers.

Objective To establish a renal cell co-culture system to simulate the renal barrier system,and to test its responsiveness to different glucose concentrations,and to investigate the regulatory effect of miR-29b-3p on osteopontin(OPN)/transforming growth factor β(TGF-β)pathway and the changes of this pathway under high glucose condition.Methods The three-cell co-culture system consisting of human renal podocytes,human glomerular mesangial cells and human renal tubular epithelial cells was established to test the cell viability and glucose consumption value at glucose concentrations of 5,8,12 and 16 mmol/L.The content of TGF-β and OPN in cell supernatant was measured.The recombinant plasmid and siRNA of OPN were transfected,and the expressions of TGF-β and OPN were detected by Q-PCR and Western blot.Results The mRNA expressions of OPN,TGF-β and miR-29b were significantly increased at 12 mmol/L glucose conditions.Western blot results showed that the protein expression of OPN increased in high glucose conditions,while the protein expression of TGF-β did not change significantly.After adding miR-29b-3p activator,the mRNA levels of OPN and TGF-β in the cell supernatant were significantly increased.After adding miR-29b-3p inhibitor,the mRNA levels of OPN and TGF-β in the cell supernatant were significantly decreased.Western blot results showed that compared with 5 mmol/L glucose,the protein expressions of OPN and TGF-β were increased by miR-29b-3p activator,and the protein expressions of OPN and TGF-β were decreased by miR-29b-3p inhibitor.After transfection with OPN recombinant plasmid,the content of TGF-β in the cell supernatant was significantly increased,and the mRNA expressions of OPN and TGF-β in the cells were significantly increased.After transfection with OPN siRNA,the content of TGF-β in the cell supernatant was decreased,and the expression of OPN mRNA in the cells was significantly decreased,but the expression of TGF-β mRNA was not significantly increased.Conclusion The renal cell co-culture system can mimic the complex renal environment in vivo.When induced by high glucose,cell proliferation is inhibited,glucose consumption is increased,and the content of TGF-β in the cell supernatant is increased,and miR-29b-3p has a regulatory effect on OPN/TGF-β signaling pathway in the co-culture system.

Objective To investigate the distribution of the traditional Chinese medicine(TCM)constitution types in the patients with nonspecific low back pain(NLBP)and to explore the correlation of the thickness of ligamentum flavum with the age,body mass index(BMI),gender,the presence of diabetes mellitus,and the grading of hypertension.Methods Sixty patients with NLBP admitted to Guangdong Second Traditional Chinese Medicine Hospital from January 2023 to June 2023 were selected as the study subjects.The TCM constitution types of the patients were identified,the thickness of the ligamentum flavum at lumbar vertebrae 4/5 segment(L4/5)disc level was measured by computerized tomography(CT)scanning,and the patients'age,genders,TCM constitution types,BMI,the presence or absence of diabetes mellitus,and hypertension grading were recorded.Correlation analysis and linear regression analysis were used for the exploration of the relevant influencing factors for the thickness of the ligamentum flavum of patients with NLBP.Results(1)The average thickness of ligamentum flavum in the 60 patients with NLBP was(2.60±0.72)mm.(2)The TCM constitutions of NLBP patients were classified into four types,of which blood stasis constitution was the most common,accounting for 21 cases(35.0%),followed by 19 cases(31.7%)of damp-heat constitution,12 cases(20.0%)of phlegm-damp constitution,and 8 cases(13.3%)of qi deficiency constitution.(3)The results of correlation analysis showed that BMI,gender,TCM constitution type and the presence or absence of diabetes mellitus had no influence on the thickness of ligamentum flavum in NLBP patients(P＞0.05),while the age and hypertension grading had an influence on the thickness of ligamentum flavum(P＜0.01).(4)The results of linear regression analysis showed that the age had an influence on the thickness of the ligamentum flavum(b = 0.034,t = 6.282,P＜0.01),while the influence of the hypertension grading had no influence on the thickness of the ligamentum flavum(P＞0.05).Conclusion The TCM constitution type of NLBP patients is predominated by blood stasis constitution,the thickness of ligamentum flavum is significantly affected by the age,and hypertension may be a potential factor affecting the thickness of ligamentum flavum.

Objective To observe the clinical efficacy of"triple-posture positive bone-setting"chiropractic manipulation combined with Tongluo Huoxue Formula for the treatment of lumbar spinal stenosis(LSS)with qi deficiency and blood stasis syndrome.Methods Sixty patients with LSS of qi deficiency and blood stasis type were randomly divided into trial group and control group,with 30 cases in each group.The trial group was treated with"triple-posture positive bone-setting"chiropractic manipulation(a chiropractic manipulation performed under the positive cooperation of the patients at three postures)combined with Tongluo Huoxue Formula,while the control group was treated with"triple-posture positive bone-setting"chiropractic manipulation combined with conventional western medicine.The course of treatment for the two groups covered 4 weeks.Before and after treatment,the patients of the two groups were observed in the changes of pain visual analogue scale(VAS)score,Japanese Orthopedic Association(JOA)score of lumbar function,Oswestry Disability Index(ODI)score,straight-leg raising test results and serum interleukin 6(IL-6)and C-reactive protein(CRP)levels.After treatment,the clinical efficacy and safety of the two groups were evaluated.Results(1)After 4 weeks of treatment,the total effective rate of the trial group was 96.67％(29/30)and that of the control group was 63.33％(19/30).The intergroup comparison(tested by Fisher's exact test)showed that the clinical efficacy of the trial group was significantly superior to that of the control group(P＜0.05).(2)After treatment,the lumbar function indicators of pain VAS scores and ODI scores in the trial group were significantly lower(P＜0.05),and the JOA scores were significantly higher than those before treatment(P＜0.05),while in the control group,only the ODI scores were significantly lower than those before treatment(P＜0.05).The intergroup comparison showed that the decrease of VAS and ODI scores and the increase of JOA scores in the trial group were significantly superior to those in the control group(P＜0.05 or P＜0.01).(3)After treatment,the Laseque s sign of the trial group was significantly improved compared with that before treatment(P＜0.05),while no significant improvement was presented in the control group(P＞0.05).The intergroup comparison showed that the improvement of Laseque's sign in the trial group was significantly superior to that in the control group(P＜0.01).(4)After treatment,the levels of serum inflammatory factors of IL-6 and CRP in the two groups were lower than those before treatment(P＜0.05),and the decrease of serum IL-6 level in the trial group was significantly superior to that in the control group(P＜0.05),but CRP level in the two groups after treatment did not differ from that before treatment,no statistically significant difference was shown between the two groups after treatment,either(P＞0.05).(5)The incidence of adverse reactions in the trial group was 6.67％(2/30)and that in the control group was 13.33％(4/30),and the intergroup comparison(by Fisher's exact test)showed that there was no significant difference between the two groups(P＞0.05).Conclusion The therapeutic effect of"triple-posture positive bone-setting"chiropractic manipulation combined with Tongluo Huoxue Formula exert certain effect for the treatment of LSS patients with qi deficiency and blood stasis syndrome,and it has more obvious advantages in improving the lumbar function,promoting the rehabilitation of the patients,and lowering the level of serum inflammatory factors than"triple-posture positive bone-setting"chiropractic manipulation combined with conventional western medication.

With the growing demand of personalized medicine for children, it is especially important to develop medicines for children. In this study, using metoprolol tartrate as model drug, we developed 3D printed chewable tablets suitable for children with automated dosage distribution using semi-solid extruded (SSE) 3D printing technology. Based on the quality by design concept, this study prepared a semi-solid material with good printability using gelatin as the substrate, constructed 3D models and printed tablets with the aid of computer-aided design. The printing parameters were optimized and determined as follows: print temperature of 35-37 ℃, print speed of 25 mm·s^-1, fill rate of 15%, and number of outer profile layers of 2. Subsequently, the printing process and the quality uniformity of the tablets were verified, and a linear relationship between the dose and the number of model layers was obtained. Finally, 3D printed chewable tablets were superior in terms of appearance, dose accuracy and compliance compared with traditional split-dose commercially available tablets. In this study, 3D printed metoprolol tartrate chewable tablets with good performance were successfully prepared to address the personalized medication needs of pediatric patients.

Based on the dual needs of analgesia and anti-inflammation in trauma treatment, this study uses acetaminophen and moxifloxacin hydrochloride as active pharmaceutical ingredients and develops a composite bilayer tablet with a dual-phase drug release system by using binder jet 3D printing technology. Due to the complexity of the 3D printing process, there is an interaction between the various parameters. Through the optimization of the process, the relationship between the key process parameters can be determined more intuitively. In this study, the process of extended-release tablets was optimized to maintain the mechanical properties of the tablets while realizing the regulation of release. The full-factor experimental design of three central points 2³ was used to analyze the factors that significantly affect the quality attributes of extended-release tablets and the interaction between factors. The optimal extended-release process parameters were obtained by the response optimizer: the inkjet quantity of the printing ink was 10 (about 13.8 pL), the powder thickness was 180 μm, and the running speed was 360 mm·s^-1. The in vitro of release of 3D printed composite bilayer tablets showed that the in vitro of release of 3D printed tablets and commercially available tablets conformed to the Ritger-Peppas release model. The results of porosity showed that the immediate-release layer of the preparation has many pores and large pore size, and the dissolution of the immediate release layer within 15 min was greater than 85%. The internal pore size of the extended release layer is large, but it can still release slowly for up to 8 h, the mechanism may be related to the extended release of HPMC gelation. On the basis of verifying the rationality of the design goal of 3D printed composite bilayer tablets, this study also provides a theoretical basis for the preparation of 3D printing complex preparations.