OBJECTIVE: To explore the displacement and pressure distribution of American Chiropractic in a model of third lumbar syndrome based on finite element analysis. METHODS: On March 2021, CT and MRI images of a 23-year-old male patient with right third lumbar syndrome were selected. A 3D stl model was established using Mimics and CATIA, and the data was imported into Hypermesh, Abaqus & ANSYS. The elastic modulus and Poisson's ratio of the affected side material were adjusted to establish its finite element model. Based on the comparison of the operating positions and routines of the American Chiropractic and the lumbar spine oblique pull method, but with differences in the focus and direction of force, the experimental group simulated the American Chiropractic with the healthy side (left side) lying position of the model. The upper endplate of L₃ and the lower part below L₃ twisted accordingly with the body position, we applied a vertical forward thrust of 246 N to the plane formed by the L₄, L₅ spinous processes and L₄ upper articular processes;The control group simulates the oblique pull method of the lumbar spine, requiring the model to lie on the healthy side (left side), fix the upper endplate of L₄, and perform a horizontal rotation along the longitudinal axis of L₃ vertebral body. At this time, the contact force in the upward direction is also set to 246 N. Compare the displacement and stress differences between the L₁-L₅ intervertebral bodies, intervertebral discs, articular processes, and transverse process muscles in two intervention models. RESULTS: ① Under safe load conditions, a test force of 246 N was applied to the model, and the maximum vertebral displacement occurred on the right side of the L₃ vertebral body (1.197 mm) after manual intervention in the control group. The vertebral displacement between L₁-L₅ induced by manual intervention in the experimental group was smaller than that of the control group's manual intervention (P<0.05). ② The maximum vertebral body stress occurred on the right side of the L₃ vertebral body after manual intervention in the control group (98.425 MPa). The stress on each vertebral body formed by the experimental group's manual intervention was lower than that of the control group's manual intervention (P<0.05). ③The maximum intervertebral disc stress occurred on the right side of the L_2,3 intervertebral disc (6.282 MPa) after manual intervention in the control group. ④ The maximum joint process stress occurred on the right side of the L₄ upper joint process after manual intervention in the experimental group (1.587 MPa). The joint process stress on the left side below L₁ and the left side above and below L₂ induced by manual intervention in the experimental group was lower than that of the control group (P<0.05). ⑤The maximum stress on the intertransverse process muscle was observed at the right lateral L₃ process end (31.960 MPa) of L_3,4 in the control group after manual intervention. The stress on the L_2,3 and L_4,5 segments of the intertransverse process muscle induced by manual intervention in the experimental group was lower than that of the control group's manual intervention (P<0.05). CONCLUSION The mechanical feedback of the L₁-L₅ vertebral body, the lower left side of the articular process L₁, the upper and lower left side of the articular process L₂, and the L_2,3 and L_4,5 segments of the transverse process muscle in the model indicates that performing American Chiropractic for the treatment of third lumbar transverse process syndrome can accurately hit the target pain point and allow the patient's tissue to form a low stress and low tension state after manual operation, thereby reducing the possibility of tissue damage caused by hypertonia after intervertebral joint movement, making it relatively safe. The application of American Chiropractic will be a new supplement to the traditional treatment plan for third lumbar transverse process syndrome.
Humans ; Finite Element Analysis ; Male ; Lumbar Vertebrae/physiopathology* ; Biomechanical Phenomena ; Young Adult ; Manipulation, Chiropractic ; Adult ; Tomography, X-Ray Computed ; Magnetic Resonance Imaging

Objective To analyze the cellular and histopathological characteristics of underdiagnosed thyroid nodules of Chinese thyroid imaging reporting and data system(C-TIRADS) categories 3 and 4a,thus improving the understanding of these lesions. Methods The data of ultrasound and fine needle aspiration cytology were collected from 683 nodules diagnosed based on pathological evidence in 549 patients undergoing thyroid surgery.The cellular and histopathological characteristics of C-TIRADS 3 and 4a nodules were analyzed. Results Two hundred and sixty-eight nodules were classified as C-TIRADS category 3,including 236 benign nodules,12 low-risk ones,and 20 (7.46%) malignant ones.Two hundred and twenty-one nodules were classified as C-TIRADS category 4a,including 133 benign nodules,7 low-risk ones,and 81 (36.65%) malignant ones.The malignancy rates differed between C-TIRADS 3 and 4a nodules (χ²=58.93,P<0.001),and both were higher than the recommended malignancy rate in the guidelines for malignancy risk stratification of thyroid nodules (C-TIRADS) (both P<0.001).According to the pathological evidence,the underdiagnosed C-TIRADS 3/4a nodules were mainly papillary thyroid carcinoma,especially in patients with Hashimoto thyroiditis.There was not a consistent one-to-one match between each ultrasound result and each cytological classification of low-risk thyroid nodules.Conclusions When the malignant features in preoprative ultrasound imaging are atypical or absent,papillary thyroid carcinoma (especially with Hashimoto thyroiditis),follicular carcinoma,and medullary carcinoma are likely to be underdiagnosed as C-TIRADS 3 or 4a nodules.Therefore,efforts should be made to fully understand the cellular and pathological characteristics of these lesions.
Humans ; Thyroid Nodule/diagnostic imaging* ; Female ; Male ; Middle Aged ; Adult ; Ultrasonography ; Biopsy, Fine-Needle ; Aged ; Young Adult ; Thyroid Neoplasms/diagnostic imaging* ; Adolescent

Objective To design an adjustable and removable nursing support for dressing patients with lower extremity injuries.Methods The adjustable nursing support was composed of a supporting plate,a cylinder,an upper adjustment mechanism and a lower fixation mechanism.The supporting plate was used to hold the leg of the patient,which had a curved st ruc t u re with a length from 40 to 80 cm;the cylinder was internally snap-fitted with a second slip sleeve to facilitate the adjustment of the support plate;the upper adjustment mechanism mainly consisted of a second sliding bar,a second cross bar and an adjustment plate;the lower fixation mechanism was mainly composed of a first clamping plate and a second clamping plate.Results The adjustable nursing support could be firmly fixed on the sickbed,and its height and angle could be adjusted according to the patient's wound position and subjective comfort.Conclusion The adjustable nursing support gains advantages in safety and patient comfort,and can be used for the dressing of patients with lower extremity injuries.[Chinese Medical Equipment Journal,2024,45(8):110-112]

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

This study explored the growth-promoting effect and mechanism of the endophytic bacterium Kocuria rosea on Rehmannia glutinosa, aiming to provide a scientific basis for the development of green bacterial fertilizer. R. glutinosa 'Jinjiu' was treated with K. rosea, and the shoot parameters including leaf length, leaf width, plant width, and stem diameter were measured every 15 days. After 120 days, the shoots and roots were harvested. The root indicators(root number, root length, root diameter, root fresh weight, root dry weight, root volume, and root vitality) and secondary metabolites(catalpol, rehmannioside A, rehmannioside D, verbascoside, and leonuride) were determined. The R. glutinosa growth-promoting mechanism of K. rosea was discussed from the effect of K. rosea on the nutrient element content in R. glutinosa and rhizosphere soil and the genome information of this plant. After application of K. rosea, the maximum increases in leaf length, leaf width, plant width, and stem diameter were 35.67%(60 d), 25.39%(45 d), 40.17%(60 d), and 113.85%(45 d), respectively. The root number, root length, root diameter, root volume, root fresh weight, root dry weight, and root viability increased by 41.71%, 45.10%, 48.61%, 94.34%, 101.55%, 147.61%, and 42.08%, respectively. In addition, the content of rehmannioside A and verbascoside in the root of R. glutinosa increased by 76.67% and 69.54%, respectively. K. rosea promoted the transformation of nitrogen(N), phosphorus(P), and potassium(K) in the rhizosphere soil into the available state. Compared with that in the control, the content of available N(54.60 mg·kg~(-1)), available P(1.83 μmol·g~(-1)), and available K(83.75 mg·kg~(-1)) in the treatment with K. rosea increased by 138.78%, 44.89%, and 14.34%, respectively. The content of N, P, and K in the treatment group increased by 293.22%, 202.63%, and 23.80% in the roots and by 23.60%, 107.23%, and 134.53% in the leaves of R. glutinosa, respectively. K. rosea carried the genes related to colonization(rbsB, efp, bcsA, and gmhC), N, P, and K metabolism(narG, narH, narI, nasA, nasB, GDH2, pyk, aceB, ackA, CS, ppa, ppk, ppk2, pstS, pstA, pstB, and pstC), and indole-3-acetic acid and zeatin synthesis(iaaH and miaA). Further studies showed that K. rosea could colonize the roots of R. glutinosa and secrete indole-3-acetic acid(3.85 μg·mL~(-1)) and zeatin(0.10 μg·mL~(-1)). In summary, K. rosea promotes the growth of R.ehmannia glutinosa by enhancing the nutrient uptake, which provides a theoretical basis for the development of plant growth-promoting microbial products.
Rehmannia/metabolism* ; Endophytes/metabolism* ; Plant Roots/growth & development* ; Micrococcaceae/genetics* ; Data Mining ; Plant Leaves/metabolism* ; Genomics ; Rhizosphere

Objective: To explore the drug resistance mechanism and gene structure characteristics of a carbapenemase-producing novel incompatibility group plasmid pNY2385-KPC from Citrobacter freundii. Methods: A multi-drug resistant strain was obtained from urine samples of patients with fever in the emergency ward of Li Huili Hospital, Ningbo Medical Center. Bacterial species was preliminary identified and finally confirmed by 16S rRNA gene amplification and the average nucleotide identity alignment, respectively. The minimum inhibitory concentrations of the antimicrobial agents were determined by VITEK 2 Compact System. The complete genome sequence was obtained by "third-generation" sequencing methods, and then detailed annotation of gene function and comparative genomic analysis of plasmid structure were carried out by BLASTP/BLASTN, RefSeq, ConservedDomains, ResFinder, Isfinder, etc. Results: The pNY2385-KPC carried by citrobacter freundii NY2385 belonged a novel incompatibility group, and contained bla_KPC-2 and conjugative transfer (type Ⅳ secretory system, T4SS) genes, which could induce conjugative transfer. A total of 15 plasmids of the same type as pNY2385-KPC were retrieved by NCBI, which were from Citrobacter freundii, and the rest were from Serratia marcescens, Escherichia coli, Enterobacter cloacae, Klebsiella pneumoniae, Raoultella planticola and other bacteria, and were broad-host-range plasmids. The sequence comparative analysis of all 6 of the novel plasmid from Citrobacter freundii showed that the structure of the novel plasmid had certain conserved property, with Tn6296 variant structure carrying bla_KPC-2, and plasmid pCF1807-3 had both repA_pNY2385-KPC and repA_IncX8. Conclusion: The pNY2385-KPC type plasmids in Citrobacter freundii carried bla_KPC-2 resistance gene, which were divided into two subtypes: repA_pNY2385-KPC single replicator and repA_pNY2385-KPC/repA_IncX8 complex replicator, belonging to broad-host-range plasmids. And as a mobile genetic element, the plasmids promote the spread of bla_KPC-2.
Humans ; Citrobacter freundii/genetics* ; RNA, Ribosomal, 16S/genetics* ; Emergency Service, Hospital ; Escherichia coli ; Genomics