Objective: To retrospectively analyze the prevalence of hepatitis C virus (HCV) infection among voluntary blood donors in Qinghai Province over a ten-year period and to provide evidence for refining blood safety screening strategies. Methods: Blood samples from 362 066 blood donors in Qinghai collected between January 2015 and April 2024 were simultaneously screened using enzyme-linked immunosorbent assay (ELISA) and nucleic acid testing (NAT). Follow-up was conducted for donors with reactive HCV RNA screening results, and alanine transaminase (ALT) was detected by rate method. Results: The HCV positive rate among blood donors in Qinghai was 0.22%. Gender, marital status, number of blood donations, and educational level were associated with HCV infection. Significant differences in HCV positive rates were observed among donors across regions and ethnic groups. The HCV positive rate among donors in Golog Tibetan Autonomous Prefecture (with an average altitude of 4 330 m) was significantly higher than that in Xining (0.52% vs 0.21%, P<0.001). Positivity rates were also significantly higher in Salar (0.84%), Hui (0.81%), Zang (0.60%), and Tu (0.45%) ethnic groups compared to the Han ethnic group (0.17%) (P<0.001). The abnormal rate of ALT in HCV-positive donors was higher than in non-HCV donors (6.13% vs 1.55%) (P<0.001). Conclusion: The relatively high HCV positivity rate among blood donors in Qinghai highlights the need for further investigation into viral sources, risk factors, and transmission routes. Optimized screening strategies are essential to ensure blood safety.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective     To share the clinical experience of video-assisted thoracoscopic surgery (VATS) anatomic basal segmentectomy by single-direction method. Methods     The clinical data of 352 patients who underwent VATS anatomic basal segmentectomy in West China Hospital between April 2015 and April 2021 were retrospectively reviewed, including 96 males and 256 females with a median age of 50 (range, 26-81) years. All basal segmentectomies were performed under thoracoscopy, through the interlobar fissure or inferior pulmonary ligament approach, and following the strategy of single-direction and the method of "stem-branch". Results    All patients underwent basal segmentectomy successfully (49 patients of uniportal procedure, 3 patients of biportal procedure and 300 patients of triportal procedure) without addition of incisions or conversion to thoracotomy and lobectomy. The median operation time was 118 (range, 45-340) min, median intraoperative blood loss was 20 (range, 5-500) mL, median drainage time was 2 (range, 1-22) d and median postoperative hospital stay was 4 (range, 2-24) d. The postoperative complications included pneumonia in 6 patients, prolonged drainage (air leakage duration>5 d or drainage duration>7 d) in 18 patients, cerebral infarction in 1 patient and other complications in 2 patients. All patients were treated well and discharged without main complaints. No perioperative death happened. Conclusion    VATS anatomic basal segmentectomy is feasible and safe. It can be performed in a simple manner following the strategy of single-direction.

Objective     To identify the risk factors for postoperative recurrence of peripheral solid small-nodule lung cancer (PSSNLC) (T≤2 cm), and to explore the effects of surgery types on prognosis. Methods     We extracted data from Western China Lung Cancer Database (WCLCD), a prospectively maintained database at the Department of Thoracic Surgery, West China Hospital, Sichuan University, and Surveillance, Epidemiology, and End Results (SEER)  database for peripheral solid small-nodule lung cancer patients (T≤2 cm N0M0, stageⅠ) who underwent surgery between 2005 and 2016. We used univariable and multivariable logistic regression to analyze risk factors for recurrence of PSSNLC. We applied propensity-score matching to compare the long-term results of segmentectomy and lobectomy, as well as the survival of patients from WCLCD and SEER. We finally included 4 800 patients with PSSNLC (T≤2 cm N0M0)(WCLCD: SEER=354∶4 446). We matched 103 segmentectomies and 350 lobectomies in T≤1 cm, and 280 segmentectomies and 1 067 lobectomies in 1 cm

Objective     To summarize the perioperative and long-term outcomes of ground-glass opacity (GGO) dominant early stage lung cancer patients treated by anatomic segmentectomy. Methods     We collected clinical data of 756 patients from Western China Lung Cancer Database, who underwent intentional anatomic segmentectomy [tumor size (T) ≤ 2 cm, GGO ≥ 50%] in the Department of Thoracic Surgery, West China Hospital, Sichuan University from 2009 to 2018. There were 233 males and 523 females at a median age of 53 (25-83) years including 290 (38.4%) patients of simple segmentectomy and 466 (61.6%) patients of complex segmentectomy. All patients were diagnosed as adenocarcinoma, including 338 (44.7%) patients of minimally invasive adenocarcinoma and 418 (55.3%) patients of invasive adenocarcinoma. Results     The median operative time was 115 (38-300) min, the median blood loss was 20 (5-800) mL, 58 (7.7%) patients had postoperative complications and the postoperative stay was 4 (2-24) days. The median follow-up period was 43.0 (30.1-167.9) months. Five-year overall survival rate was 99.5% [95%CI (98.8%, 100.0%)], 5-year recurrence-free survival rate was 98.8% [95%CI (97.5%, 100.0%)], and 5-year lung cancer-specific survival rate was 100.0%. Conclusion    Anatomic segmentectomy has favorable perioperative outcomes and excellent prognosis in GGO dominant early stage lung cancer patients.

Objective     To analyze the perioperative outcomes of uniportal thoracoscopic lobectomy compared with three-port thoracoscopic lobectomy. Methods     Data were extracted from the Western China Lung Cancer Database, a prospectively maintained database at the Department of Thoracic Surgery, West China Hospital, Sichuan University. Perioperative outcomes of the patients who underwent uniportal or three-port thoracoscopic lobectomy for lung cancer during January 2014 through April 2021 were analyzed by using propensity score matching. Altogether 5 817 lung cancer patients were enrolled who underwent thoracoscopic lobectomy (uniportal: 530 patients; three-port: 5 287 patients). After matching, 529 patients of uniportal and 1 583 patients of three-port were included. There were 529 patients with 320 males and 209 females at median age of 58 (51, 65) years in the uniportal group and 1 583 patients with 915 males and 668 females at median age of 58 (51, 65) years in the three-port group. Results     Uniportal thoracoscopic lobectomy was associated with less intraoperative blood loss (20 mL vs. 30 mL, P<0.001), longer operative time (115 min vs. 105 min, P<0.001) than three-port thoracoscopic lobectomy. No significant difference was found between the two groups regarding the number of lymph node dissected, rate of conversion to thoracotomy, incidence of postoperative complication, postoperative pain score within 3 postoperative days, length of hospital stay, or hospitalization expenses. Conclusion     Uniportal video-assisted thoracoscopic lobectomy is safe and effective, and the overall perioperative outcomes are comparable between uniportal and three-port strategies, although the two groups show differences in intraoperative blood loss.

Objective    To explore the safety and effectiveness of video-assisted thoracoscopic surgery (VATS) pneumonectomy for bronchiectasis. Methods    The clinical data of 164 patients undergoing VATS pneumonectomy or open thoracotomy for bronchiectasis in our hospital from March 2002 to July 2012 were retrospectively analyzed. Patients were divided into two groups according to different surgical methods: a thoracotomy group (122 patients, 63 males, 59 females) and a thoracoscopic surgery group (42 patients, 15 males, 27 females). Surgical and follow-up indicators were compared between the two groups. Results    There was no difference between the two groups in the blood loss, operation time, perioperative mortality or complication. However patients undergoing VATS had shorter length of postoperative stay than those undergoing thoracotomy (6.9±2.6 d vs. 8.1±3.1 d, P=0.030). In the thoracoscopic surgery group, 3 patients were lost to follow-up and in the thoracotomy group, 5 patients were lost to follow-up. In a median follow-up of 51 months (ranging from 2 to 116 months), 36 patients (92.3%) fully recovered with no sputum or haemoptysis and 3 (7.7%) partially recovered with a reduced sputum or haemoptysis in the thoracoscopic surgery group; 105 (89.7%) fully recovered with no sputum or haemoptysis, 10 (8.5%) partially recovered with a reduced sputum or haemoptysis while 2 (1.7%) without any improvement in the thoracotomy group with no statistical difference (P=0.700). Conclusion    VATS pneumonectomy for bronchiectasis is equivalent to thoracotomy in terms of safety and effectiveness, and can be used as an alternative surgical procedure for the treatment of bronchiectasis.

Hepatitis B virus (HBV) that causes Hepatitis B with a high chronic rate, could lead to hepatic cirrhosis and hepatocellular carcinoma. The IL28B gene belongs to a new interferon family λ and its genetic polymorphisms are identified to be associated with treatment effect and viral clearance. The purpose of this review is to discuss the role of the IL28B gene in treatment response and viral clearance of HBV-infected individuals, and further to reveal the mechanisms. This review could provide a theoretical basis for personalized medicines of HBV patients.

Objective To construct nursing postgraduates' professional ability questionnaire and examine its reliability and validity,in order to provide a reliable and valid measure of professional ability.Methods After extensive studies on contemporary literature and interview,theory framework of professional ability was concluded and items pool was set up. Expert consultation was applied to evaluate the questionnaire and its items and pretesting questionnaire was formed. Pretesting questionnaires filled out by 122 nursing postgraduates were used to do the items analysis and exploratory factor analysis. A total of 176 nursing postgraduates were recruited to examine its validity,reliability and the confirmatory factor analysis. Results The nursing postgraduates' professional ability questionnaire included 5 subscales (27 items):planning and learning ability,self-management ability,ability to complete the task,social and communication skills,and professional ability. The Cronbach's α of total scale was 0.885,and subscales were 0.704-0.822. Retest reliability was 0.899. Correlation coefficients of total scale scores and each factor were 0.789-0.896 (P<0.01). The correlation coefficients among factors were 0.465-0.714 (P<0.01). According to the results of confirmatory factor analysis,x2/df<5,NFI,RFI,IFI,TLI,CFI were all close to or larger than 0.90,RMSEA< 0.06,with PNFI and PCFI both greater than 0.5.Conclusions With good validity and reliability,the nursing postgraduates' professional ability questionnaire could be used as a measure of nursing postgraduates' professional ability.