ObjectiveTo explore the effect of elbow-wrist functional orthosis on plantar pressure distribution and balance function in stroke patients with hemiplegia. MethodsFrom June, 2024 to April, 2025, 60 patients with post-stroke hemiplegia were recruited from Huashan Hospital, Fudan University, and Shanghai Hebin Rehabilitation Hospital. They were randomly divided into control group (n = 30) and intervention group (n = 30). The control group received routine neurological rehabilitation, while the intervention group received additional training with an elbow-wrist functional orthosis on the affected side, for eight weeks. Before and after intervention, the Modified Ashworth Scale (MAS) of the elbow joint, plantar pressure symmetry index (SI), plantar contact area and mean plantar pressure were recorded, and balance and mobility were assessed using the Berg Balance Scale (BBS), Timed Up & Go Test (TUGT) and 10-Meter Walk Test (10MWT). ResultsTwo cases dropped out in the control group. After treatment, MAS grades of the elbow joint, forefoot SI, affected side plantar pressure area, BBS scores, TUGT and 10MWT of both groups improved (|Z| > 3.969, |t| > 3.528, P < 0.01), while the hindfoot SI and average pressure of the affected foot improved in the intervention group (∣t∣ > 4.264, P < 0.001). Except for TUGT and 10MWT, the intervention group was superior to the control group (∣Z∣ > 2.030, ∣t∣ > 2.096, P < 0.05). ConclusionThe elbow-wrist functional orthosis can enhance balance function in stroke patients with hemiplegia by reducing upper-limb spasticity, optimizing center-of-gravity distribution, and improving postural control.

ObjectiveCleft palate (CP) is a common congenital deformity often associated with velopharyngeal insufficiency (VPI), which disrupts the physiological coupling between respiration and speech. Conventional clinical assessments, such as nasometry and spirometry, provide limited static data and fail to visualize the dynamic spatiotemporal distribution of lung ventilation during phonation. This study introduces spatiotemporal electrical impedance tomography (ST-EIT) to evaluate speech-respiratory functional features in CP patients compared to normal controls (NC). The aim is to characterize multi-domain respiratory patterns and to validate an interpretable machine learning framework for providing objective, quantitative evidence for clinical assessment. MethodsSeventy-five participants were enrolled in this study, comprising 37 patients with surgically repaired CP and 38 healthy volunteers matched for age, gender, and body mass index (BMI). All subjects performed standardized sustained phonation tasks while undergoing synchronous monitoring with a 16-electrode EIT system and a pneumotachograph. A comprehensive feature engineering pipeline was developed to extract physiological parameters across 3 complementary domains. (1) Temporal domain: including inspiratory/expiratory phase duration (tPhase), time constants (Tau), and inspiratory-to-expiratory time ratios (TI/TE); (2) airflow domain: comprising mean flow, peak flow, and instantaneous flow at 25%, 50%, and 75% of tidal volume; and (3) spatial domain: quantifying global and regional tidal impedance variation (TIV), global inhomogeneity (GI), and center of ventilation (CoV). Extreme Gradient Boosting (XGBoost) classifiers were trained using 5 distinct data sources (Spirometry, Nasometry, Inspiratory-EIT, Expiratory-EIT, and fused ST-EIT). Model performance was rigorously evaluated via stratified 5-fold cross-validation, and Shapley additive explanations (SHAP) were employed to quantify global and local feature contributions. ResultsThe CP group exhibited a distinct respiratory phenotype compared to controls. In the temporal domain, CP patients showed significantly shorter inspiratory (1.60 s vs.1.85 s, P<0.001) and expiratory phase durations (2.45 s vs. 3.95 s, P<0.001), indicating a rapid, shallow breathing rhythm. In the airflow domain, while inspiratory flows were comparable, the CP group demonstrated significantly elevated mean and peak flows during the expiratory phase (P<0.001), reflecting compensatory respiratory effort. Spatially, CP patients presented significant ventilation redistribution, characterized by higher regional TIV in the right-anterior (ROI1) and left-posterior (ROI4) quadrants, but lower TIV in the left-anterior (ROI2) quadrant. In terms of diagnostic accuracy, the multi-modal ST-EIT model achieved the highest performance (AUC: 0.915±0.012, Accuracy: 0.843±0.019, F1-score: 0.872±0.017), substantially outperforming models based on spirometry (AUC: 0.721) or nasometry (AUC: 0.625) alone. Interpretability analysis revealed that spatial domain features were the most critical, contributing 53.4% to the model’s decision-making, followed by temporal (25.0%) and airflow (21.6%) features. ConclusionST-EIT successfully captures the temporal, airflow, and spatial deviations in CP speech respiration that are undetectable by conventional methods—specifically, rapid phase transitions, hyperdynamic expiratory airflow, and regional ventilation heterogeneity. This study validates ST-EIT as a robust, non-invasive, and radiation-free tool for characterizing speech-respiratory dysfunction, offering high clinical value for bedside screening, rehabilitation planning, and longitudinal monitoring of patients with cleft palate.

ObjectiveCleft palate (CP) is a common congenital deformity often associated with velopharyngeal insufficiency (VPI), which disrupts the physiological coupling between respiration and speech. Conventional clinical assessments, such as nasometry and spirometry, provide limited static data and fail to visualize the dynamic spatiotemporal distribution of lung ventilation during phonation. This study introduces spatiotemporal electrical impedance tomography (ST-EIT) to evaluate speech-respiratory functional features in CP patients compared to normal controls (NC). The aim is to characterize multi-domain respiratory patterns and to validate an interpretable machine learning framework for providing objective, quantitative evidence for clinical assessment. MethodsSeventy-five participants were enrolled in this study, comprising 37 patients with surgically repaired CP and 38 healthy volunteers matched for age, gender, and body mass index (BMI). All subjects performed standardized sustained phonation tasks while undergoing synchronous monitoring with a 16-electrode EIT system and a pneumotachograph. A comprehensive feature engineering pipeline was developed to extract physiological parameters across 3 complementary domains. (1) Temporal domain: including inspiratory/expiratory phase duration (tPhase), time constants (Tau), and inspiratory-to-expiratory time ratios (TI/TE); (2) airflow domain: comprising mean flow, peak flow, and instantaneous flow at 25%, 50%, and 75% of tidal volume; and (3) spatial domain: quantifying global and regional tidal impedance variation (TIV), global inhomogeneity (GI), and center of ventilation (CoV). Extreme Gradient Boosting (XGBoost) classifiers were trained using 5 distinct data sources (Spirometry, Nasometry, Inspiratory-EIT, Expiratory-EIT, and fused ST-EIT). Model performance was rigorously evaluated via stratified 5-fold cross-validation, and Shapley additive explanations (SHAP) were employed to quantify global and local feature contributions. ResultsThe CP group exhibited a distinct respiratory phenotype compared to controls. In the temporal domain, CP patients showed significantly shorter inspiratory (1.60 s vs.1.85 s, P<0.001) and expiratory phase durations (2.45 s vs. 3.95 s, P<0.001), indicating a rapid, shallow breathing rhythm. In the airflow domain, while inspiratory flows were comparable, the CP group demonstrated significantly elevated mean and peak flows during the expiratory phase (P<0.001), reflecting compensatory respiratory effort. Spatially, CP patients presented significant ventilation redistribution, characterized by higher regional TIV in the right-anterior (ROI1) and left-posterior (ROI4) quadrants, but lower TIV in the left-anterior (ROI2) quadrant. In terms of diagnostic accuracy, the multi-modal ST-EIT model achieved the highest performance (AUC: 0.915±0.012, Accuracy: 0.843±0.019, F1-score: 0.872±0.017), substantially outperforming models based on spirometry (AUC: 0.721) or nasometry (AUC: 0.625) alone. Interpretability analysis revealed that spatial domain features were the most critical, contributing 53.4% to the model’s decision-making, followed by temporal (25.0%) and airflow (21.6%) features. ConclusionST-EIT successfully captures the temporal, airflow, and spatial deviations in CP speech respiration that are undetectable by conventional methods—specifically, rapid phase transitions, hyperdynamic expiratory airflow, and regional ventilation heterogeneity. This study validates ST-EIT as a robust, non-invasive, and radiation-free tool for characterizing speech-respiratory dysfunction, offering high clinical value for bedside screening, rehabilitation planning, and longitudinal monitoring of patients with cleft palate.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

This study explored the active ingredients for anti-angiogenesis in Wenyujin Rhizoma Concisum. Ten sesquiterpenoids were isolated from Wenyujin Rhizoma Concisum by silica gel column chromatography, thin layer chromatography, and high performance liquid chromatography. According to the results of multiple spectroscopic methods and circular dichroism, they were identified as wenyujinlactam A(1),(4S,7S)11-hydroxycurdione(2), 8,9-seco-4β-hydroxy-1α,5βH-7(11)-guaen-8,10-olide(3), curcumadione(4), phaeocaulisin E(5), procurcumadiol(6), zedouronediol(7), epiprocurcumenol(8), gajutsulactone A(9), and(7Z)-1β,4α-dihydroxy-5α,8β(H)-eudesm-7(11)-en-8,12-olide(10). Compounds 1 and 2 were new sesquiterpenoids. Compounds 1, 6, 8, and 10 can inhibit human umbilical vein endothelial cells(HUVEC) proliferation with IC_(50) values of 38.83, 45.19, 32.12, and 37.80 μmol·L~(-1), respectively. Compounds 1 and 10 can inhibit HUVEC migration with IC_(50) values of 29.70 and 36.48 μmol·L~(-1), respectively.
Sesquiterpenes/isolation & purification* ; Humans ; Drugs, Chinese Herbal/isolation & purification* ; Rhizome/chemistry* ; Human Umbilical Vein Endothelial Cells/drug effects* ; Molecular Structure ; Cell Proliferation/drug effects*

Traditional Chinese medicine(TCM) is the pillar for the development of motherland medicine, and animal medicine has a long history of application in China, characterized by wide resources, strong activity, definite efficacy, and great benefits. It has significant potential and important status in the consumption market of raw materials of TCM. In the context of global climate change, farming system alterations, and low renewability, the depletion of wild medicinal animal resources has accelerated. Accordingly, the conservation and sustainable utilization of wild resources of animal medicinal materials has become a problem that garners increasing attention and urgently needs to be solved. This paper summarizes the current situation of domestic and foreign medicinal animal breeding and research progress in industrial application in recent years and points out the issues related to standardized breeding, germplasm selection and breeding, and quality evaluation standards for medicinal animals. Furthermore, this paper discusses standardized breeding, quality standards, resource protection and utilization, and the search for alternative resources for rare and endangered medicinal animals. It proposes that researchers should systematically carry out in-depth basic research on animal medicine, improve the breeding scale and level of medicinal animals, employ modern technology to enhance the quality standards of medicinal materials, and strengthen the research and development of alternative resources. This approach aims to effectively address the relationship between protection and utilization and make a significant contribution to the sustainable development of medicinal animal resources and the animal-based Chinese medicinal material industry.
Animals ; Breeding ; China ; Medicine, Chinese Traditional ; Conservation of Natural Resources

Background Enhancing the sense of honor and belonging among medical staff is a key component of establishing a modern hospital management system. Compared to medical staff at general hospitals, medical staff at oncology hospitals are more prone to job burnout, yet few studies in China have focused on job burnout among employees in oncology hospitals. Objective To propose a hypothetical model in which job well-being moderates the relationship between stressors and occupational burnout, to explore how stressors influence burnout and potential moderating role of job well-being, and to provide better understanding of job burnout and motivate employees based on the double-edge sword effect of stressors. Methods A cross-sectional survey was conducted in May 2022 at a tertiary oncology specialty hospital in Chongqing, China. A total of 1 898 medical staff were recruited. Data were collectedthrough four scales including a general information questionnaire, Maslach Burnout Inventory-Human Service Survey, Work Stressor Scale, and Occupational Well-being Scale for Medical Staff. Independent sample t-tests and one-way ANOVA were used for univariate comparisons of job burnout. Pearson correlation analysis was employed to examine the relationships between job burnout, stressors, and job well-being. Hierarchical linear regression was conducted to identify factors influencing job burnout and to examine potential moderating role of job well-being in the relationship between stressors and job burnout. Results A total of 2 123 questionnaires were distributed, with 1 898 valid responses, yielding an effective response rate of 89.4%. The prevalence of job burnout was 60.1%. The correlation coefficient was 0.717 (P<0.001) between stressors and burnout, −0.784 (P<0.05) between job well-being and burnout, and −0.744 (P<0.001) between stressors and job well-being. The quadratic stressors showed a statistically significant effect on burnout (β=0.404, P<0.01). Job well-being positively moderated the relationship between the linear stressors and burnout (β=1.289, P<0.001) and negatively moderated the relationship between the quadratic stressors and job burnout (β=−0.571, P<0.01), explaining 7.1% of the variance. Conclusion Job burnout prevalence is relatively high among employees in oncology hospitals. There is a curvilinear relationship between stressors and job burnout, with job well-being moderating this relationship. From a practical perspective, it is recommended to establish a tiered stress alert system to monitor employees’ stress levels and prevent prolonged exposure to high-pressure conditions. Additionally, improving employees’ job well-being through institutional incentives and developmental support can enhance its moderating role in mitigating the adverse effects of stressors on job burnout. Meanwhile, fostering coordinated responses between organizations and individuals is crucial for strengthening mental health management systems, thereby supporting a healthy, stable, and sustainable development of the healthcare workforce.

OBJECTIVE: To evaluate the short-and medium-term efficacy of posterior medial branch block in the treatment of persistent pain after percutaneous vertebral augmentation. METHODS: From January 2018 to January 2023, a total of 1, 062 patients with osteoporotic vertebral compression fractures underwent percutaneous vertebral augmentation. Among them, 32 elderly patients who experienced persistent low back pain after surgery and subsequently received posterior medial branch block and cryoablation were included. Six patients died during follow-up, leaving 26 patients for final analysis (1 male, 25 females). The mean age was (82.96±5.66) years (ranged, 76 to 94 years). The mean body mass index was (23.76±3.08) kg·m^-2(ranged 18.1 to 27.2 kg·m^-2). The bone mineral density T-value ranged from -2.5 to -4.3 with a mean of (-3.09±0.56). The mean volume of bone cement injected was 6.00 (5.38, 7.00) ml. Fracture locations were T₁₁ (2 cases), T₁₂ (7 cases), L₁ (10 cases), L₂ (6 cases), and L₃ (1 case). The mean interval from vertebral augmentation to block treatment was (7.12±2.22) months (rangd 6 to 12 months). The vertebral augmentation procedures were percutaneous kyphoplasty(PKP) in 12 cases and percutaneous vertebroplasty (PVP) in 14 cases. At the 2nd week, 3rd month, and 6th month after the block, the numerical rating scale(NRS), Oswestry disability index(ODI), patient satisfaction, and pain relief rate at the 6th month were evaluated. Relationships between pain relief rate at the 6th month after the last treatment and possible influencing factors were analyzed. RESULTS: Compared with X-ray films after percutaneous vertebral augmentation, the X-ray films before block showed an increase in kyphotic angle and vertebral compression rate, with statistically significant differences(P<0.05). At the 2nd week, 3rd month, and 6th month after posterior medial branch block and cryoablation, NRS and ODI scores were significantly lower than before the block(P<0.05). Among the 26 patients, 5 received additional cryoablation. At the 6th month after the last treatment, 19 patients reported excellent or good satisfaction. Univariate binary Logistic analysis showed all P>0.05, and no independent factor affecting final satisfaction or pain relief at 6 months after the last treatment was identified. CONCLUSION Posterior medial branch block(with cryoablation) can effectively improve short-and medium-term symptoms and function in patients with persistent axial low back pain after percutaneous vertebral augmentation for osteoporotic vertebral fractures.
Humans ; Male ; Female ; Aged ; Spinal Fractures/surgery* ; Aged, 80 and over ; Osteoporotic Fractures/surgery* ; Vertebroplasty/adverse effects* ; Nerve Block/methods*

Objective To investigate the therapeutic effects of interleukin 23p19(IL-23p19) monoclonal antibody in the MRL/lpr lupus-like mouse model. Methods A total of 36 female MRL/lpr mice aged 8 weeks were randomly divided into 6 groups: PBS group (blank control), IgG group (isotype IgG), dexamethasone (DEX) group (positive control), and three IL-23p19 monoclonal antibody treatment groups with different dose gradients: low dose (LD, 1 mg/kg), medium dose (MD, 3 mg/kg), and high dose (HD, 10 mg/kg). Drug intervention began at 12 weeks of age via tail vein injection. Urine protein levels were measured using urine protein test strips; serum anti-dsDNA antibody levels were detected by ELISA; serum creatinine and blood urea nitrogen levels were measured using an automatic biochemical analyzer; renal histopathological changes were analyzed by H&E and PAS staining; immunofluorescence was used to assess IgG and C3 immune complex deposition in kidney tissues; flow cytometry was employed to examine the expression of T helper 1(Th1), Th2, Th17, T follicular helper (Tfh), and regulatory T cells(Treg) cell subsets in the spleen; and RT-qPCR was used to detect the expression of related transcription factors in the spleen. Results IL-23p19 monoclonal antibody reduced urine protein levels, alleviated splenomegaly, improved renal function, and decreased anti-dsDNA antibody levels in MRL/lpr mice. It also mitigated glomerulonephritis and reduced renal immune complex deposition. Furthermore, IL-23p19 monoclonal antibody significantly suppressed the proportion of Th1 and Th17 cells while upregulating Treg cell proportion in the spleen. Additionally, it downregulated T-bet and retinoic acid receptor-related orphan receptor γt (RORγt) mRNA levels and upregulated forkhead box P3(FOXP3) mRNA levels in the spleen. Conclusions IL-23p19 monoclonal antibody demonstrates significant therapeutic effects in MRL/lpr mice, likely through modulation of the Th17/Treg cell balance.
Animals ; Female ; Mice, Inbred MRL lpr ; T-Lymphocytes, Regulatory/drug effects* ; Th17 Cells/drug effects* ; Antibodies, Monoclonal/therapeutic use* ; Interleukin-23 Subunit p19/immunology* ; Mice ; Lupus Nephritis/drug therapy* ; Kidney/drug effects* ; Antibodies, Antinuclear/blood*