ObjectiveTo investigate the present situation of input, output, outcome and impact of all registered community-based rehabilitation stations in Inner Mongolia in China, and analyze how the input predict the output, outcome and impact. MethodsFrom March 1st to April 30th, 2025, a questionnaire survey was conducted on all registered community-based rehabilitation stations in Inner Mongolia, covering four dimensions: input, output, outcome and impact. A total of 1 365 questionnaires were distributed. The input included four items: laws and policies, human resources, equipment and facilities, and rehabilitation information management. The output included two items: technical paths and benefits/effectiveness. The outcome included three items: coverage rates, rehabilitation interventions and functional results. The impact included two items: health and sustainability. Each item contained several questions, all of which were described in a positive way. Each question was scored from one to five. A lower score indicated that the situation of the community-based rehabilitation station was more in line with the content described in the question. Regression analysis was performed using the total score of each item of input dimension as independent variables, and the total scores of the output, outcome and impact dimensions as dependent variables. ResultsA total of 1 262 valid questionnaires were collected. The mean values of input, output, outcome and impact of community-based rehabilitation stations were 1.827 to 1.904, with coefficient of variation of 45.892% to 49.239%. The regression analysis showed that, rehabilitation information management, human resources, and laws and policies significantly predicted the output dimension (R² = 0.910, P < 0.001). Meanwhile, all four items in the input dimension predicted both the outcome (R² = 0.850, P < 0.001) and impact dimensions (R² = 0.833, P < 0.001). ConclusionInput, output, outcome and impact of the community-based rehabilitation stations in Inner Mongolia were generally in line with the content of the questions, although some imbalances were observed. Additionally, the input of community-based rehabilitation stations could significantly predict their output, outcome and impact.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

Background: and Purpose Symptomatic intracranial hemorrhage (sICH) following endovascular thrombectomy (EVT) is a severe complication associated with adverse functional outcomes and increased mortality rates. Currently, a reliable predictive model for sICH risk after EVT is lacking. Methods: This study used data from patients aged ≥20 years who underwent EVT for anterior circulation stroke from the nationwide Taiwan Registry of Endovascular Thrombectomy for Acute Ischemic Stroke (TREAT-AIS). A predictive model including factors associated with an increased risk of sICH after EVT was developed to differentiate between patients with and without sICH. This model was compared existing predictive models using nationwide registry data to evaluate its relative performance. Results: Of the 2,507 identified patients, 158 developed sICH after EVT. Factors such as diastolic blood pressure, Alberta Stroke Program Early CT Score, platelet count, glucose level, collateral score, and successful reperfusion were associated with the risk of sICH after EVT. The TREAT-AIS score demonstrated acceptable predictive accuracy (area under the curve [AUC]=0.694), with higher scores being associated with an increased risk of sICH (odds ratio=2.01 per score increase, 95% confidence interval=1.64–2.45, P<0.001). The discriminatory capacity of the score was similar in patients with symptom onset beyond 6 hours (AUC=0.705). Compared to existing models, the TREAT-AIS score consistently exhibited superior predictive accuracy, although this difference was marginal. Conclusions The TREAT-AIS score outperformed existing models, and demonstrated an acceptable discriminatory capacity for distinguishing patients according to sICH risk levels. However, the differences between models were only marginal. Further research incorporating periprocedural and postprocedural factors is required to improve the predictive accuracy.

Objective:To investigate the current status of application of stereotactic body radiation therapy (SBRT) in China, aiming to provide reference for promoting the development of this technology.Methods:From January to March 2024, a questionnaire was designed and distributed online, targeting member units of the Professional Committee of Stereotactic Radiosurgery Treatment, which covers 175 radiotherapy units in 30 provinces and regions nationwide. The survey focused on the current application of SBRT technology and its utilization in the treatment of early-stage non-small cell lung cancer (NSCLC). A statistical description of the survey results was presented.Results:Of 175 questionnaires distributed, a total of 130 valid responses were collected, with an effective response rate of 74.3%. A total of 81.5% (106/130) of the units had implemented SBRT technology, and 99.1% of the respondents believed it was necessary to further promote SBRT technology, yet the actual training rate was only 67.0%. SBRT equipment configuration: there were a total of 267 SBRT equipment, featuring a diverse range of types, with traditional linear accelerators as the mainstays, accounting for 76.0% ( n=203), followed by 12.0% ( n=32) for TOMO, 6.4% ( n=17) for Cyber knife, 3.7% ( n=10) for Gamma knife, and proton/heavy ion equipment at 1.5% ( n=4), respectively. The percentage of units with multi-leaf collimator leaf widths ≤0.5 cm was 93.4% (99/106). The application of SBRT: the first radiotherapy unit commenced SBRT in 2000, and this technology entered a period of rapid growth after 2015, sustaining a steady increase over the past decade; SBRT technology was mainly applied in the brain, lung, liver, bone, adrenal gland, and kidney, with application rates of 97.2%, 94.3%, 86.8%, 71.7%, 56.6%, and 27.4%, respectively, while the application rates for the pancreas, metastatic lymph nodes, and other parts were less than 5%. Current status of SBRT technology application in early-stage NSCLC: 90.6% (96/106) of units had implemented SBRT; pre-treatment multi-disciplinary diagnosis and treatment accounted for 77% (74/96); the proportion of application units for peripheral and central type lung cancer lesions both exceeded 57.3%, whereas the application rate for ultra-central type and lesions > 5 cm lung cancer was less than 30%; there was significant variability in the selection of reference guidelines, dose fractionation patterns, and the concept of central type among units. Conclusions:The development of SBRT technology in China is in a period of steady growth, but several issues such as low training rate and lack of standardization still exist. The survey results provide important reference for clinical training and promotion of SBRT technology in China.

Objective To evaluate the efficacy and safety of a novel intravascular lithotripsy(IVL)balloon—Vesscrack shockwave balloon—for vascular preparation before stent implantation in patients with severe coronary artery calcification(CAC).Methods This was a prospective,single-arm,multicenter study conducted in China from June 2022 to October 2022.Patients with severe CAC were treated with the Vesscrack shockwave balloon for lesion preparation,followed by drug-eluting stent(DES)implantation.Of these,33 patients underwent optical coherence tomography(OCT).The primary endpoint was procedural success,defined as successful stent implantation with residual stenosis≤30％and the absence of in-hospital major adverse events,including cardiac death,target vessel-related myocardial infarction,or target lesion revascularization.Results A total of 170 patients[mean age:(65.9±7.9)years,116 males]were enrolled.After treatment with IVL and DES,the minimum lumen diameter increased significantly compared to baseline[(2.34±0.40)mm vs.(0.95±0.33)mm,P＜0.001],the degree of stenosis was significantly reduced[(13.24±6.60)％vs.(65.18±10.59)％,P＜0.001].Procedural success was achieved in 100％of cases,and device success was 98.8％.The 30-day patient-related cardiovascular clinical composite endpoint(POCE)rate was 0.0,with no target lesion failure,no confirmed or potential thrombotic events were observed.The shockwave energy generator demonstrated excellent stability and ease of use.Among the 33 patients assessed with OCT,after IVL intervention,the maximum calcified area of the lumen[(3.51±1.51)mm2 vs.(2.85±1.80)mm2,P＜0.001],and the minimum lumen area within the target lesion[(3.08±1.04)mm2 vs.(2.02±0.75)mm2,P＜0.001],and after DES intervention,the luminal area of the largest calcified site[(6.59±1.64)mm2 vs.(2.85±1.80)mm2,P＜0.001]and the minimum luminal area within the target lesion[(6.19±1.45)mm2 vs.(2.02±0.75)mm2,P＜0.001]were significantly increased,and the differences were statistically significant.Conclusions The Vesscrack shockwave balloon is effective and safe for vascular preparation in patients with severe CAC prior to stent implantation.It achieves significant calcified plaque modification,high procedural success rates,and minimal complications.

Gastric cancer with peritoneal metastasis (GCPM) is a common and lethal manifestation of advanced gastric cancer, with a median survival of only 5-11 months. This consensus was developed by 30 experts from Asia (China, Japan, Korea, and Singapore) using the Delphi method and the GRADE evidence grading system. A total of 29 statements were formulated, covering the diagnosis and assessment of GCPM, indications for laparoscopic exploration and NIPS (normothermic intraperitoneal and systemic treatment), treatment regimens, prevention and management of complications, criteria for conversion surgery, and postoperative intraperitoneal therapy. The consensus aims to standardize clinical practice and improve the prognosis of patients with GCPM.

Objective:To design and develop a cone-beam CT imaging system for small animals with continuously adjustable spatial resolution.Methods:The imaging system used an X-ray source with a focal spot size of 30 μm and a flat panel detector with a pixel size of 100 μm. On this premise, a " stepping-focusing-rotating" image acquisition mode was proposed, in which the " focusing" and " stepping" systems were sequentially embedded in the " rotating" system. In this acquisition mode, the X-ray source and flat panel detector were relatively stationary to form the " focusing" system. When the " stepping" system accurately transported the object to the scanning position, the " focusing" system could achieve adjustable spatial resolution by making linear motion around the object to be scanned according to different experimental requirements. Finally the " rotating" system achieve high-quality imaging.Results:The variable spatial resolution of small animal CBCT ranges from 35.7 μm to 71.4 μm, and the FOV ranges from 39.6 mm to 108.0 mm. The conversion time for the limit spatial resolution is 19.125 s, which allowed accurate 3D reconstruction of normal mice at different resolutions with high reproducibility.Conclusions:A cone-beam CT suitable for small animals has been developed, whose spatial resolution and FOV can be adjusted arbitrarily within a certain range, which can meet the different imaging requirements in rodent experiments.

Objective:To summarize the clinical characteristics of elderly patients with stage Ⅰ diffuse large B-cell lymphoma (DLBCL) and analyze the factors associated with prognosis.Methods:A case series study was conducted by retrospectively collecting clinical data from patients aged over 60 years with newly diagnosed stage Ⅰ DLBCL across 20 medical centers in Jiangsu Province, China, between June 2010 and April 2023. The involved site, classification and treatment plan were summarized. The primary endpoints were progression-free survival (PFS) and overall survival (OS). Statistical analyses were performed using the Kaplan-Meier method, and Cox regression model.Results:The study included 255 patients with a median age of 69 years, of whom 130 (51.0%) were male, 66 (25.9%) were aged ≥75 years and 26 (10.1%) had a high Charlson Comorbidity Index (CCI) score of ≥2. Extranodal involvement was observed in 163 (63.9%) patients, with the stomach (37.4%, 61/163), intestine (19.0%, 31/163), testes (11.0%, 18/163), and breast (7.4%, 12/163) being the most frequently affected sites. The non-germinal center B-cell (non-GCB) subtype was prevalent in 63.7% of patients (142/223), with no significant difference between the nodal and extranodal groups ( P=0.681). Furthermore, 73.9% (184/249) and 11.7% (29/249) of patients received the R-CHOP (rituximab, cyclophosphamide, doxorubicin, vincristine, prednisone) and R-miniCHOP regimen, respectively. The overall 3-year PFS rate was 81.5%, and the 3-year OS rate was 85.6%. Patients aged ≥75 years ( HR=2.910, 95% CI 1.565-5.408, P=0.001) and/or with a CCI score ≥2 ( HR=2.324, 95% CI 1.141-4.732, P=0.020) had a significantly poorer PFS. Incorporating age ≥75 years and CCI score ≥2 into the stage-modified international prognostic index (sm-IPI) can better stratify the prognosis of elderly patients with stage Ⅰ DLBCL. The 3-year PFS rate was 48.7% in the high-risk group versus 85.7% in the low-risk group ( P<0.001). Conclusions:Our findings show that the elderly patients with stage Ⅰ DLBCL were predominantly characterized by extranodal involvement (particularly in the stomach and intestinal tract) and non-GCB subtype. Age ≥75 years and CCI ≥2 were identified as independent prognostic factors. The newly established sm-IPI-75-CCI incorporating these factors demonstrated superior prognostic discrimination compared to conventional risk assessment systems.

Objective The purpose of writing the"expert consensus on humanistic care for patients in hospice care"(hereinafter referred to as the"consensus")aims to standardize the practice of humanistic care in the field of hospice care,ensuring that humanistic care is integrated throughout the entire service process for hospice care patients and their families.Methods A systematic search was conducted in domestic and foreign databases for literature related to hospice care and humanistic care,including guidelines,expert consensuses,systematic reviews or Meta-analyses,and evidence summaries.High-quality evidence was evaluated,extracted,and summarized to form the initial draft of the"consensus".From June to October 2024,20 experts from the fields of hospice care,nursing humanities,and evidence-based nursing were invited to participate in 1 round of expert consultation.Among them,13 experts were selected for 2 rounds of expert demonstration meetings.After collating and analyzing the experts' opinions,the initial draft was revised and refined,ultimately resulting in the final version of the"consensus".Results The effective response rate of the consultation questionnaire was 100％,with expert authority coefficient of 0.880,judgment coefficient of 0.935,and familiarity level of 0.825.The Kendall harmony coefficient of the expert consultation was 0.134(P＜0.05).The"consensus"consisted of 13 aspects,including the targets and objectives,principles,institutional guarantees,environmental requirements,etc.Conclusion This"consensus"possesses strong scientific rigor and practicality,which can provide guidance and references for the practice of humanistic care in the field of hospice care,promoting the standardization and humanization of hospice care services.