Acute Gelsemium poisoning is a systemic disease primarily affecting the central nervous system and respiratory symptoms caused by the ingestion of a substantial amount of Gelsemium within a short period. It manifests as sudden onset and rapid progression, primarily caused by accidental ingestion due to misidentification, and posing significant health risks. The compilation of the Technical Plan for Emergency Health Response to Acute Gelsemium Poisoning describes in detail the specialized practice and technical requirements in the process of handling acute Gelsemium poisoning, including accident investigation and management, laboratory testing and identification, in-hospital treatment, and health monitoring. The guidelines clarify key procedures and requirements such as personal protection, investigation elements, etiology determination, medical rescue, and health education. The key to acute Gelsemium poisoning investigation lies in promptly identifying the toxin through exposure history, clinical manifestations, and sample testing. Because there is no specific antidote for Gelsemium poisoning, immediate removal from exposure, rapid elimination of the toxin, and respiratory monitoring are critical on-site rescue measures. Visual identification of food or herbal materials, followed by laboratory testing to determine Gelsemium alkaloids in samples is a rapid effective screening method. These guidelines offer a scientific, objective, and practical framework to support effective emergency responses to acute Gelsemium poisoning incidences.

This study aims to investigate the effect of Chaijin Jieyu Anshen Formula on the neuroinflammation of rats with insomnia complicated with depression through the regulation of triggering receptor expressed on myeloid cells 2(TREM2)/complement protein C1q signaling pathway. Rats were randomly divided into a normal group, a model group, a positive drug group, as well as a high, medium, and low-dose groups of Chaijin Jieyu Anshen Formula, with 10 rats in each group. Except for the normal group, the other groups were injected with p-chlorophenylalanine and exposed to chronic unpredictable mild stress to establish the rat model of insomnia complicated with depression. The sucrose preference experiment, open field experiment, and water maze test were performed to evaluate the depression in rats. Enzyme-linked immunosorbent assay was employed to detect serum 5-hydroxytryptamine(5-HT), dopamine(DA), and norepinephrine(NE) levels. Hematoxylin and eosin staining and Nissl staining were used to observe the damage in nucleus accumbens neurons. Western blot and immunofluorescence were performed to detect TREM2, C1q, postsynaptic density 95(PSD-95), and synaptophysin 1(SYN1) expressions in rat nucleus accumbens, respectively. Golgi-Cox staining was utilized to observe the synaptic spine density of nucleus accumbens neurons. The results show that, compared with the model group, Chaijin Jieyu Anshen Formula can significantly increase the sucrose preference as well as the distance and number of voluntary activities, shorten the immobility time in forced swimming test and the successful incubation period of positioning navigation, and prolong the stay time of space exploration in the target quadrant test. The serum 5-HT, DA, and NE contents in the model group are significantly lower than those in the normal group, with the above contents significantly increased after the intervention of Chaijin Jieyu Anshen Formula. In addition, Chaijin Jieyu Anshen Formula can alleviate pathological damages such as swelling and loose arrangement of tissue cells in the nucleus accumbens, while increasing the Nissl body numbers. Chaijin Jieyu Anshen Formula can improve synaptic damage in the nucleus accumbens and increase the synaptic spine density. Compared to the normal group, the expression of C1q protein was significantly higher in the model group, while the expression of TREM2 protein was significantly lower. Compared to the model group, the intervention with Chaijin Jieyu Anshen Formula significantly downregulated the expression of C1q protein and significantly upregulated the expression of TREM2. Compared with the model group, the PSD-95 and SYN1 fluorescence intensity is significantly increased in the groups receiving different doses of Chaijin Jieyu Anshen Formula. In summary, Chaijin Jieyu Anshen Formula can reduce the C1q protein expression, relieve the TREM2 inhibition, and promote the synapse-related proteins PSD-95 and SNY1 expression. Chaijin Jieyu Anshen Formula improves synaptic injury of the nucleus accumbens neurons, thereby treating insomnia complicated with depression.
Animals ; Male ; Rats ; Nucleus Accumbens/metabolism* ; Drugs, Chinese Herbal/administration & dosage* ; Depression/complications* ; Membrane Glycoproteins/genetics* ; Rats, Sprague-Dawley ; Sleep Initiation and Maintenance Disorders/complications* ; Neurons/metabolism* ; Receptors, Immunologic/genetics* ; Signal Transduction/drug effects* ; Synapses/metabolism*

OBJECTIVE: To investigate the association between ABO blood types and gestational diabetes mellitus (GDM) risk. METHODS: A prospective birth cohort study was conducted. ABO blood types were determined using the slide method. GDM diagnosis was based on a 75-g, 2-h oral glucose tolerance test (OGTT) according to the criteria of the International Association of Diabetes and Pregnancy Study Groups. Logistic regression was applied to calculate the odds ratios ( ORs) and 95% confidence intervals ( CIs) between ABO blood types and GDM risk. RESULTS: A total of 30,740 pregnant women with a mean age of 31.81 years were enrolled in this study. The ABO blood types distribution was: type O (30.99%), type A (26.58%), type B (32.20%), and type AB (10.23%). GDM was identified in 14.44% of participants. Using blood type O as a reference, GDM risk was not significantly higher for types A ( OR = 1.05) or B ( OR = 1.04). However, women with type AB had a 19% increased risk of GDM ( OR = 1.19, 95% CI = 1.05-1.34; P < 0.05), even after adjusting for various factors. This increased risk for type AB was consistent across subgroup and sensitivity analyses. CONCLUSION The ABO blood types may influence GDM risk, with type AB associated with a higher risk. Incorporating it-either as a single risk factor or in combination with other known factors-could help identify individuals at risk for GDM before or during early pregnancy.
Humans ; Female ; Pregnancy ; Diabetes, Gestational/etiology* ; ABO Blood-Group System ; Adult ; Prospective Studies ; Risk Factors ; Young Adult

Patients with severe trauma require an extremely timely treatment and transfusion plays an irreplaceable role in the emergency treatment of such patients. An increasing number of evidence-based medicinal evidences and clinical practices suggest that patients with severe traumatic bleeding benefit from early transfusion of low-titer group O whole blood or hemostatic resuscitation with red blood cells, plasma and platelet of a balanced ratio. However, the current domestic mode of blood supply cannot fully meet the requirements of timely and effective blood transfusion for emergency treatment of patients with severe trauma in clinical practice. In order to solve the key problems in blood supply and blood transfusion strategies for emergency treatment of severe trauma, Branch of Clinical Transfusion Medicine of Chinese Medical Association, Group for Trauma Emergency Care and Multiple Injuries of Trauma Branch of Chinese Medical Association, Young Scholar Group of Disaster Medicine Branch of Chinese Medical Association organized domestic experts of blood transfusion medicine and trauma treatment to jointly formulate Chinese expert consensus on blood support mode and blood transfusion strategies for emergency treatment of severe trauma patients ( version 2024). Based on the evidence-based medical evidence and Delphi method of expert consultation and voting, 10 recommendations were put forward from two aspects of blood support mode and transfusion strategies, aiming to provide a reference for transfusion resuscitation in the emergency treatment of severe trauma and further improve the success rate of treatment of patients with severe trauma.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Endodontic diseases are a kind of chronic infectious oral disease.Common endodontic treatment concepts are based on the removal of inflamed or necrotic pulp tissue and the replacement by gutta-percha.However,it is very essential for endodontic treatment to debride the root canal system and prevent the root canal system from bacterial reinfection after root canal therapy(RCT).Recent research,encompassing bacterial etiology and advanced imaging techniques,contributes to our understanding of the root canal system's anatomy intricacies and the technique sensitivity of RCT.Success in RCT hinges on factors like patients,infection severity,root canal anatomy,and treatment techniques.Therefore,improving disease management is a key issue to combat endodontic diseases and cure periapical lesions.The clinical difficulty assessment system of RCT is established based on patient conditions,tooth conditions,root canal configuration,and root canal needing retreatment,and emphasizes pre-treatment risk assessment for optimal outcomes.The findings suggest that the presence of risk factors may correlate with the challenge of achieving the high standard required for RCT.These insights contribute not only to improve education but also aid practitioners in treatment planning and referral decision-making within the field of endodontics.

Objective:To evaluate the effect of preemptive analgesia with ibuprofen on postoperative pain following single posterior tooth implantation, aiming to provide a clinical reference for its application.Methods:A multicenter, randomized, double-blind, placebo-controlled parallel-group trial was conducted. A total of 82 participants were included in the trial, meeting the eligibility criteria from April 2022 to April 2024 at the Capital Medical University School of Stomatology (40 cases), Beijing TianTan Hospital, Capital Medical University (22 cases), Beijing Chao-Yang Hospital, Capital Medical University (20 cases). Participants were randomly assigned in a 1∶1 ratio to either the ibuprofen group or the control group, with each group comprising 41 individuals. Participants in the ibuprofen group received 300 mg of sustained-release ibuprofen capsules orally 15 min before surgery, while the control group received a placebo. Both groups received the same postoperative analgesic regimen for 3 days. Pain scores were assessed using the numerical rating scale at 30 min, 4 h, 6 h, 8 h, 24 h, 48 h, and 72 h postoperatively, and the additional use of analgesic medication was recorded from days 4 to 6 postoperatively.Results:A total of 82 participants were initially enrolled in the study, with 7 dropouts (4 from the control group and 3 from the ibuprofen group), resulting in 75 participants (37 in the control group and 38 in the ibuprofen group) completing the trial. There were no reports of adverse events such as nausea or vomiting among the participants. The ibuprofen group exhibited significantly lower pain scores at 4 h, 6 h and 8 h [1.0 (0.0, 2.0), 1.0 (0.0, 2.0), 1.5 (0.0, 3.0) ] postoperatively compared to the control group 4 h, 6 h and 8 h [2.0 (1.0, 3.0), 3.0 (1.5, 4.0), 2.0 (1.0, 4.0)] ( Z=-1.99, P=0.047; Z=-3.01, P=0.003; Z=-2.10, P=0.036). The proportions of patients requiring additional analgesic medication between days 4 and 6 post-surgery were 18.4% (7/38) in the ibuprofen group and 27.0% (10/37) in the control group, with no significant difference (χ 2=0.79, P=0.373). The median additional medication usage postoperatively was [0.0 (0.0, 0.0) pills] in the ibuprofen group and [0.0 (0.0, 1.0) pills] in the control group, with no significant difference ( Z=-0.78, P=0.439). Conclusions:Preemptive analgesia with ibuprofen effectively reduces postoperative pain following tooth implantation, representing a safe and effective perioperative pain management strategy.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective To analyze coating properties of porous artificial joints,including coating morphology and coating mechanical properties,and summarize the range of coating properties of current mainstream products,to provide references for the design and development of new products,as well as provide the basis for the long-term implant removal analysis.Methods Samples for the surface morphology,shear strength,and tensile strength of the coatings used in the experiment were prepared in accordance with ASTM F1854,ASTM F1044,and ASTM F1 147 standards,respectively.The coatings were processed using plasma spraying.The surface morphology(coating thickness,porosity,and pore intercept)of the coatings for all 17 products(Nos.1-17)was tested;for products Nos.1-7 and Nos.15-16,the shear strength test between the coating and substrate was conducted first in accordance with the test method of ASTM F1044.Then,according to the test method of ASTM F1 147,the tensile strength test between the coating and substrate was conducted.For product No.17,the shear and tensile strengths of the composite coating and simple titanium coating were tested,respectively,according to the test method of ASTM F1044 and ASTM F1 147.Results A total of 15 products(88.2％)had coating thicknesses between 300 μm and 500 μm.There were 16 metal-coated products(Nos.1-16),of which 11(68.75％of the total)had coating porosities between 30％and 50％,and 14(87.5％of the total)had coating pore intercepts between 50 μm and 150 μm.The mechanical properties of the coatings were independent of the substrate material used.The shear and tensile strengths of the composite coatings with hydroxyaptite(HA)were significantly lower than those of the pure metal coatings.Conclusions For the design and manufacture of artificial joints with porous coatings,the performance of the coating can be referred to the following indexes:the coating thickness is 300-500 μm,the coating porosity is 30％-50％,the coating pore intercept is 50-150 μm.The substrate materials can be selected based on the use of the product.The effects of a lower bonding force on product performance should be considered when designing prostheses with composite coatings containing HA.This range of performance metrics provides control for long-term clinical extraction analyses.

OBJECTIVE: To investigate whether the combination of chemotherapy with staged Chinese herbal medicine (CHM) therapy could enhance health-related quality of life (QoL) in non-small-cell lung cancer (NSCLC) patients and prolong the time before deterioration of lung cancer symptoms, in comparison to chemotherapy alone. METHODS: A prospective, double-blind, randomized, controlled trial was conducted from December 14, 2017 to August 28, 2020. A total of 180 patients with stage I B-IIIA NSCLC from 5 hospitals in Shanghai were randomly divided into chemotherapy combined with CHM (chemo+CHM) group (120 cases) or chemotherapy combined with placebo (chemo+placebo) group (60 cases) using stratified blocking randomization. The European Organization for Research and Treatment of Cancer (EORTC) Quality-of-Life-Core 30 Scale (QLQ-C30) was used to evaluate the patient-reported outcomes (PROs) during postoperative adjuvant chemotherapy in patients with early-stage NSCLC. Adverse events (AEs) were assessed in the safety analysis. RESULTS: Out of the total 180 patients, 173 patients (116 in the chemo+CHM group and 57 in the chemo+placebo group) were included in the PRO analyses. The initial mean QLQ-C30 Global Health Status (GHS)/QoL scores at baseline were 57.16 ± 1.64 and 57.67 ± 2.25 for the two respective groups (P>0.05). Compared with baseline, the chemo+CHM group had an improvement in EORTC QLQ-C30 GHS/QoL score at week 18 [least squares mean (LSM) change 17.83, 95% confidence interval (CI) 14.29 to 21.38]. Conversely, the chemo+placebo group had a decrease in the score (LSM change -13.67, 95% CI -22.70 to -4.63). A significant between-group difference in the LSM GHS/QoL score was observed, amounting to 31.63 points (95% CI 25.61 to 37.64, P<0.001). The similar trends were observed in physical functioning, fatigue and appetite loss. At week 18, patients in the chemo+CHM group had a higher proportion of improvement or stabilization in GHS/QoL functional and symptom scores compared to chemo+placebo group (P<0.001). The median time to deterioration was longer in the chemo+CHM group for GHS/QoL score [hazard ratio (HR)=0.33, 95% CI 0.23 to 0.48, P<0.0010], physical functioning (HR=0.43, 95% CI 0.25 to 0.75, P=0.0005), fatigue (HR=0.47, 95% CI 0.30 to 0.72, P<0.0001) and appetite loss (HR=0.65, 95% CI 0.42 to 1.00, P=0.0215). The incidence of AEs was lower in the chemo+CHM group than in the chemo+placebo group (9.83% vs. 15.79%, P=0.52). CONCLUSION The staged CHM therapy could help improve the PROs of postoperative patients with early-stage NSCLC during adjuvant chemotherapy, which is worthy of further clinical research. (Registry No. NCT03372694).
Humans ; Carcinoma, Non-Small-Cell Lung/surgery* ; Male ; Middle Aged ; Female ; Lung Neoplasms/pathology* ; Double-Blind Method ; Drugs, Chinese Herbal/therapeutic use* ; Chemotherapy, Adjuvant ; Patient Reported Outcome Measures ; Quality of Life ; Aged ; Postoperative Period ; Prospective Studies