OBJECTIVE: To compare the short-term clinical efficacy and safety of closed reduction with Kirschner wire fixation versus open reduction with plate fixation for treating osteoporotic Colles' fractures in middle-aged and elderly patients. METHODS: Between January 2018 and January 2023, 119 patients with Colles fractures were retrospectively analyzed, including 39 males and 80 females, aged from 48 to 74 years old with an average of(60.58±6.71) years old. The time from injury to operation ranged 1 to 13 days with an average of (5.29±2.52) days. According to the surgical method, they were divided into Kirschner wire fixation group (Kirschner wire group) and plate internal fixation group (plate group). In Kirschner wire group, there were a total of 68 patients, comprising 21 males and 47 females. The average age was (61.15±6.24) years old, ranged from 49 to 74 years old. Among them, 41 cases involved the left side while 27 cases involved the right side. In the plate group, there were a total of 51 patients, including 18 males and 33 females. The average age was (59.78±5.71) years old ranged from 48 to 72 years old. Among them, there were 31 cases on the left side and 20 cases on the right side. The following parameters were recorded before and after the operation:operation time, intraoperative blood loss, hospitalization days, hospitalization expenses, postoperative complications, and radiographic parameters of distal radius (distal radius height, ulnar deviation angle, palmar tilt angle). The clinical efficacy was evaluated at 3 and 12 months after the operation using Gartland-Werley and disabilites of the arm shoulder and hand (DASH) scores. RESULTS: The patients in both groups were followed up for a duration from 12 to 19 months with an average of(13.32±2.02) months. The Kirschner wire group exhibited significantly shorter operation time compared to the plate group 27.91(13.00, 42.00) min vs 67.52(29.72, 105.32) min, Z=-8.74, P=0.00. Intraoperative blood loss was also significantly lower in the Kirschner wire group than in the plate group 3.24(1.08, 5.40) ml vs 21.91(17.38, 26.44) ml, Z=-9.31, P=0.00. Furthermore, patients in the Kirschner wire group had a shorter length of hospital stay compared to those in the plate group (8.38±2.63) days vs (11.40±2.78) days, t=-3.12, P=0.00. Additionally, hospitalization cost was significantly lower in the Kirschner wire group than in the plate group 10 111.29(6 738.98, 13 483.60) yuan vs 15 871.11(11 690.40, 20 051.82) yuan, Z=-5.62, P=0.00. The incidence of complications was 2 cases in the Kirschner wire group and 1 case in the plate group, with no statistically significant difference(P>0.05). At 3 months postoprative, the radial height of the Kirschner wire group was found to be significantly smaller than that of the plate group, with measurements of (11.45±1.69) mm and (12.11±1.78) mm respectively (t=-2.06, P=0.04). However, there were no statistically significant differences observed in ulnar deviation angle and palmar tilt angle between the two groups (P>0.05). The DASH score and Gartland-Werley score in the Kirschner group were significantly higher than those in the plate group at 3 months post-operation (19.10±9.89) vs (13.47±3.51), t=4.34, P=0.00;(11.15±3.61) vs (6.41±2.75), t=8.13, P=0.00). However, there was no significant difference between the two groups at 12 months post-operation (P>0.05). CONCLUSION Compared to plate internal fixation, closed reduction with Kirschner wire support fixation yields a slightly inferior recovery of radial height;however, there is no significant disparity in the functional score of the affected limb at 12 months post-operation. Nonetheless, this technique offers advantages such as shorter operation time, reduced intraoperative blood loss, decreased hospitalization duration, and lower cost.
Humans ; Female ; Male ; Middle Aged ; Aged ; Fracture Fixation, Internal/instrumentation* ; Bone Wires ; Bone Plates ; Retrospective Studies ; Colles' Fracture/surgery* ; Minimally Invasive Surgical Procedures/methods* ; Open Fracture Reduction/methods* ; Osteoporotic Fractures/surgery*

Pulpotomy, which belongs to vital pulp therapy, has become a strategy for managing pulpitis in recent decades. This minimally invasive treatment reflects the recognition of preserving healthy dental pulp and optimizing long-term patient-centered outcomes. Pulpotomy is categorized into partial pulpotomy (PP), the removal of a partial segment of the coronal pulp tissue, and full pulpotomy (FP), the removal of whole coronal pulp, which is followed by applying the biomaterials onto the remaining pulp tissue and ultimately restoring the tooth. Procedural decisions for the amount of pulp tissue removal or retention depend on the diagnostic of pulp vitality, the overall treatment plan, the patient's general health status, and pulp inflammation reassessment during operation. This statement represents the consensus of an expert committee convened by the Society of Cariology and Endodontics, Chinese Stomatological Association. It addresses the current evidence to support the application of pulpotomy as a potential alternative to root canal treatment (RCT) on mature permanent teeth with pulpitis from a biological basis, the development of capping biomaterial, and the diagnostic considerations to evidence-based medicine. This expert statement intends to provide a clinical protocol of pulpotomy, which facilitates practitioners in choosing the optimal procedure and increasing their confidence in this rapidly evolving field.
Humans ; Calcium Compounds/therapeutic use* ; Consensus ; Dental Pulp ; Dentition, Permanent ; Oxides/therapeutic use* ; Pulpitis/therapy* ; Pulpotomy/standards*

Instrument separation is a critical complication during root canal therapy, impacting treatment success and long-term tooth preservation. The etiology of instrument separation is multifactorial, involving the intricate anatomy of the root canal system, instrument-related factors, and instrumentation techniques. Instrument separation can hinder thorough cleaning, shaping, and obturation of the root canal, posing challenges to successful treatment outcomes. Although retrieval of separated instrument is often feasible, it carries risks including perforation, excessive removal of tooth structure and root fractures. Effective management of separated instruments requires a comprehensive understanding of the contributing factors, meticulous preoperative assessment, and precise evaluation of the retrieval difficulty. The application of appropriate retrieval techniques is essential to minimize complications and optimize clinical outcomes. The current manuscript provides a framework for understanding the causes, risk factors, and clinical management principles of instrument separation. By integrating effective strategies, endodontists can enhance decision-making, improve endodontic treatment success and ensure the preservation of natural dentition.
Humans ; Root Canal Therapy/adverse effects* ; Consensus ; Root Canal Preparation/adverse effects*

Purpose::The reconstruction of Allen's type IV fingertip amputation is a clinical challenge. Our team designed bilateral unequal-sized hallux osteo-onychocutaneous free flaps for the long-term reconstruction of Allen's type IV fingertip amputation and conducted a retrospective study with a 5-year follow-up aims to evaluate the effects of this technique.Methods::A retrospective analysis with a 5-year follow-up including 13 patients with Allen's type IV fingertip amputation who were admitted to our hospital from January 2010 to January 2017 was conducted. The patients were treated with bilateral unequal-sized hallux osteo-onychocutaneous free flaps. The operation time, intraoperative blood loss, and complications were recorded, and the survival rate of the transplanted flaps was calculated. During the 5-year follow-up after operation, the nail growth time was recorded and the finger appearance was observed. At the last follow-up appointment, the length, width, and girth of the reconstructed fingertip and contralateral normal fingertip, range of motion of the reconstructed fingertip and contralateral normal fingertip, Semmes-Weinstein test (for the evaluation of tactile sensation), and two-point discrimination testing results were recorded. SPSS 22.0 software was used for the statistical analysis and the data are presented as mean ± SD.Results::The mean operation time was (5.62 ± 0.51) h, the mean intraoperative blood loss was (34.15 ± 3.13) mL, and the survival rate of the transplanted flaps was 100%. During the 5-year follow-up, the average nail growth time was (10.14 ± 1.98) months and the average bone union time was (3.78 ± 0.91) months. The length, width, and girth of the reconstructed fingertip were (31.52 ± 3.73) mm, (17.82 ± 1.74) mm, and (59.75 ± 3.04) mm, respectively, which did not differ from those of the contralateral normal fingertip. The range of motion of the reconstructed fingertip was (12.15 ± 2.79) degrees which is different from that of the contralateral normal fingertip. The average tactile sensation evaluated via the Semmes-Weinstein test and the average two-point discrimination test of the reconstructed fingertip were (0.39 ± 0.17) g and (7.46 ± 1.14) mm, respectively, which were not different from those of the contralateral normal fingertip. The average Maryland score of feet in the donor area was 87.66 ± 7.39, which was satisfactory.Conclusion::Bilateral unequal-sized hallux osteo-onychocutaneous free flaps are an effective method to reconstruct Allen's type IV fingertip amputations with a satisfactory appearance and good sensory function.

Endodontic diseases are a kind of chronic infectious oral disease.Common endodontic treatment concepts are based on the removal of inflamed or necrotic pulp tissue and the replacement by gutta-percha.However,it is very essential for endodontic treatment to debride the root canal system and prevent the root canal system from bacterial reinfection after root canal therapy(RCT).Recent research,encompassing bacterial etiology and advanced imaging techniques,contributes to our understanding of the root canal system's anatomy intricacies and the technique sensitivity of RCT.Success in RCT hinges on factors like patients,infection severity,root canal anatomy,and treatment techniques.Therefore,improving disease management is a key issue to combat endodontic diseases and cure periapical lesions.The clinical difficulty assessment system of RCT is established based on patient conditions,tooth conditions,root canal configuration,and root canal needing retreatment,and emphasizes pre-treatment risk assessment for optimal outcomes.The findings suggest that the presence of risk factors may correlate with the challenge of achieving the high standard required for RCT.These insights contribute not only to improve education but also aid practitioners in treatment planning and referral decision-making within the field of endodontics.

The AP2/ERF gene family is one of the largest transcription factor families in the plant kingdom, and plays an important role in response to biological and abiotic stresses, plant hormone responses, and plant growth and development. In this study, the AP2/ERF family of Panax notoginseng was identified by bioinformatics methods, and the physicochemical properties, structure, phylogenetic relationship, expression pattern and function of PnDREB4 gene of the family were analyzed. The results showed that 140 AP2/ERF family members were identified in P. notoginseng, which were divided into DREB, ERF, AP2, RAV and Sololit subgroups. The physicochemical properties and motifs of proteins were similar among the subgroups. There were 34 differentially expressed genes in the AP2/ERF family of Fusarium oxysporum infected P. notoginseng plants, and 19 genes were up-regulated. The expression level of PnDREB84 was up-regulated with the extension of Fusarium oxysporum infection time in the range of 0-96 h. The content of ABA and SA in P. notoginseng plants overexpressing PnDREB84 gene increased after 4 ℃ stress. The results showed that PnDREB84 gene plays a dual regulatory role in the process of biological stress and abiotic stress. PnDREB84 gene can be used as a potential molecular marker for the breeding of new varieties of P. notoginseng. The identification of AP2/ERF transcription factor and function analysis of PnDREB84 gene of P. notoginseng provided data support for the analysis of stress resistance mechanism of P. notoginseng and the breeding of new varieties.

Objective:To investigate the diagnostic value of the combination of 18F-prostate specific membrane antigen (PSMA) PET/CT and multiparametric magnetic resonance imaging (mpMRI) in identifying the grade group of prostate cancer, using parameters derived from the two imaging modalities. Method:Prostate cancer patients diagnosed by histopathology and received 18F-PSMA PET/CT and mpMRI during September 2018 to May 2021 in our hospital were retrospectively studied. The median age was 68(64-75), with the median PSA level of 14.74(7.75-24.19)ng/mL. All patients received mpMRI before biopsy. On biopsy, 6(12.2%) patients had International Society of Urological Pathology grade group(ISUP GG) 1 diseases, 16(32.7%) had ISUP GG 2 diseases, 12(24.5%) had ISUP GG 3 diseases, and 15(10.9%) had ISUP GG 4 or 5 diseases. Patients were then divided into high-grade group (ISUP 4-5) and low-grade group(ISUP 1-3). The median age of patients in high-grade group and low-grade group were 65(62-76) and 71(65-74), respectively. The PSA level in high-grade group and low-grade group were 15.11(6.63-42.86) ng/ml and 12.31(7.94-18.25) ng/ml, respectively. No significant differences were found in age and PSA level between the two groups ( P=0.334, P=0.448). All patients underwent 18F-PSMA PET/CT within 4 weeks after biopsy. The maximum standardized uptake value(SUV max) and the minimum apparent diffusion coefficient(ADC min)were recorded, and the ratio of SUV max/ ADC minwere calculated. The correlation between the above parameters and ISUP grade group were analyzed.The diagnostic value of the parameters was evaluated by the receiver operating characteristic (ROC) curve. Results:The data of 49 patients were analyzed. The average ADC minwas (0.57±0.16)×10 -3 mm 2/s, with the average SUV max and SUV max/ADC min of 15.30±12.54 and (29.69±23.72)×10 3, respectively. Statistical differences were found in SUV max ( P=0.012) and SUV max/ADC min ( P=0.002) between the high- and low-grade groups, while ADC min ( P=0.411) showed no statistical differences between the two groups. Significant positive correlations were found between SUV max(r=0.501, P<0.001), SUV max/ADC min (r=0.527, P<0.001) and ISUP grade group, respectively. There was a negative correlation between ADC min and ISUP grade group (r=-0.296, P=0.039). SUV max/ADC min was the best index to distinguish high-grade group from low-grade group prostate cancer with the area under the curve(AUC) of 0.749. In contrast, the AUC of SUV maxand ADC min were 0.731 and 0.615, respectively. The diagnostic sensitivity and specificity of SUV max/ADC min were 73.3% and 85.3%, respectively, with a critical value of 37.23×10 3. Conclusion:The combination use of 18F-PSMA PET/CT and mpMRI could improve the diagnostic efficiency for prostate cancer, compared to either modality alone. The ratio of SUV max/ADC min has a positive correlation with ISUP grade group, and is a promising index for distinguishing the high-grade prostate cancer from low-grade cancer.

OBJECTIVE: To study mechanism of improvement of stress concentration on patellofemoral joint by stiletto needle releasing lateral patellar retinaculum guided by the theory of Jinshugu() and based on the finite element model of knee joint. and to elucidate the biomechanical mechanism of stiletto needle releasing changing patellar trajectory and reducing patellofemoral joint pressure. METHODS: CT data of knee joint from a normal male (aged 29, heighted 171 cm, weighted 58 kg) was selected. Starting with construction of three-dimensional model of knee joint by using finite element software, the finite element model of knee joint with complete tendonand bone structures were established through several steps, such as geometric reconstruction, reverse engineering, meshing, material assignment and loading analysis. The loading condition was set as 500 N load on knee joint, and the average tensile stress of quadriceps femoris tendon was about 200 N. To simulate the release of lateral patellar retinaculum by stiletto needle at 30 and 90 position of knee flexion in finite element model separately, and to compare the improvement of stress concentration of patellofemoral joint by stiletto needle intervention under different knee flexion conditions. RESULTS: The peak stress of patellofemoral joint and tibiofemoral joint decreased after stiletto needle releasing of patellofemoral lateral retinaculum compared with before intervention, which was(1) knee flexion at 30 degrees:patellar cartilage decreased by 0.498 MPa (decreased 9.06%), femoral trochlea decreased by 0.886 MPa(decreased 16.27%);(2) knee flexion at 90 degrees:patellar cartilage decreased by 0.558 MPa (decreased 8.6%), femoral trochlea decreasedby 0.607 MPa (decreased 9.94%). CONCLUSION Releasing lateral patellofemoral retinaculum with stiletto needle could effectively alleviate the stress concentration of patellofemoral joint and reduce local stress peak value, which it is helpful to improve patellar trajectory and make stress distribution more uniform.
Adult ; Biomechanical Phenomena ; Finite Element Analysis ; Humans ; Knee Joint ; Male ; Patella ; Patellofemoral Joint ; Quadriceps Muscle ; Range of Motion, Articular

This study aimed to investigate the effect of methyl eugenol(ME) on hypoxia/reoxygenation(H/R)-induced injury of human renal tubular epithelial HK-2 cells and its mechanism. The viability of HK-2 cells cultured with different concentrations of ME and exposed to H/R was detected by cell counting kit-8(CCK-8) assay. The effect of ME on the morphology of HK-2 cells was observed under an inverted microscope. The content of intracellular reactive oxygen species in different groups was detected after 2',7'-dichlorodihydrofluorescein diacetate(DCFH-DA) fluorescence staining. Cell apoptosis was determined by flow cytometry. Changes in mitochondrial membrane potential were monitored by JC-1 dye. The concentrations of nuclear factor erythroid 2 related factor 2(Nrf2), heme oxygenase-1(HO-1), and nicotinamide adenine dinucleotide phosphatase oxidase 4(Nox4) were measured by Western blot, followed by the assay of Nrf2 concentration changes in cytoplasm and nucleus by confocal fluorescence staining. The results showed that when the concentration of ME was 0-40 μmol·L~(-1), the activity of HK-2 cells was not affected. Compared with the model group, ME enhanced the activity of HK-2 cells and the cell morphology was normal. As revealed by further experiments, ME inhibited the release of reactive oxygen species and the decline in mitochondrial membrane potential of HK-2 cells after H/R injury, promoted Nrf2/HO-1 expression and Nrf2 translocation to the nucleus, and down-regulated the expression of Nox4, thereby significantly reducing apoptosis. This protective effect of ME could be reversed by the specific Nrf2 inhibitor ML385. These findings have preliminarily proved that ME effectively protected HK-2 cells against H/R injury, which might be related to its promotion of Nrf2/HO-1 signaling pathway and inhibition of Nox4. Such exploration on the possible mechanism of ME in the treatment of renal ischemia-reperfusion injury(IRI) and protection of organ function from the perspective of antioxidant stress has provided reference for related research on the treatment of acute kidney injury with traditional Chinese medicine.
Apoptosis ; Epithelial Cells/metabolism* ; Eugenol/pharmacology* ; Heme Oxygenase-1/metabolism* ; Humans ; Hypoxia ; NF-E2-Related Factor 2/metabolism* ; Oxidative Stress ; Reactive Oxygen Species ; Reperfusion Injury/drug therapy*

OBJECTIVE: To construct a dynamic knee joint finite element model based on CT image data and verify the validity of the model. To provide a simulation model and basic data for biomechanical research of the knee joint by further finite element analysis. METHODS: The CT data of a healthy male knee joint was selected. With the help of Mimics 19.0 and Hypermesh 12.0 software, a high simulation finite element model of knee joint was established following steps, including geometric reconstruction, reverse engineering, meshing and material characterization. The dynamic knee flexion model was generated by determining the boundary conditions and torque loading, and the validity of themodel was confirmed. The biomechanical changes of the tibiofemoral and patellofemoral joints under different knee flexion angles were analyzed by applying the loads (500 N) to the finite element model during knee flexion. RESULTS: A finite element model of knee joint was established based on CT images and anatomical characteristics. The model included three-dimensional elements such as bone, ligament, cartilage, meniscus and patellar retinaculum. The different finite element models of knee flexion states were produced by applying different torques after establishing boundary conditions. According to equivalent conditions (knee flexion 30 degrees, quadriceps tendon under 200 N stretch), the peak stress value of patella was 2.209 MPa and the average Mises stress was 1.132 MPa; the peak stress value of femoral trochlear was 1.405 MPa and the average Mises stress was 0.936 MPa. The validity of the model was proved by the difference between the model and previous studies of 1% to 13.5%. Dynamic model loading showed that the Mises stressof tibiofemoral joint decreased with the increase of knee flexion angle, while the Mises stress of patellofemoral joint was positively correlated with knee flexion angle. The Mises stress of cartilage stress planes at different knee flexion angles was significantly different(<0.05). CONCLUSION The finite element model established in this study is more comprehensive and can effectively simulate the biomechanical characteristics of dynamic knee joint, which provides support for further simulation mechanics researches of the knee joint.
Biomechanical Phenomena ; Finite Element Analysis ; Humans ; Knee Joint ; diagnostic imaging ; Male ; Patella ; Stress, Mechanical ; Tomography, X-Ray Computed