ObjectiveTo investigate the effects and underlying mechanisms of Shenqi Wenfei prescription （SQWF） on chronic obstructive pulmonary disease （COPD）. MethodsA rat model of COPD with lung Qi deficiency was established using lipopolysaccharide （LPS） combined with cigarette smoke. Forty-eight SD rats were randomly divided into a blank group， a model group， low-， medium-， and high-dose SQWF groups （2.835， 5.67， 11.34 g·kg^-1）， and a Yupingfeng group （1.35 g·kg^-1）. Drug administration began on day 29 after modeling and continued for 2 weeks. The general condition of the rats was observed， and the lung function in each group was assessed. Hematoxylin-eosin （HE） staining was used to observe pathological changes in lung tissue. The proportion of inflammatory cells in bronchoalveolar lavage fluid （BALF） was measured. Apoptosis in lung tissue was examined by terminal deoxynucleotidyl transferase-mediated dUTP nick end-labeling （TUNEL） staining. The release level of lactate dehydrogenase （LDH） in BALF was detected by a microplate assay. Reactive oxygen species （ROS） levels in lung tissue were detected using fluorescent probes. The levels of malondialdehyde （MDA）， total superoxide dismutase （SOD）， and reduced glutathione （GSH） in BALF were measured by biochemical methods. Ultrastructural changes in lung cells were observed via transmission electron microscopy. Double immunofluorescence staining was performed to detect the expression of thioredoxin-interacting protein （TXNIP） and nucleotide-binding oligomerization domain-like receptor protein 3 （NLRP3） in lung tissue. Western blot analysis was used to detect the protein expression of TXNIP， NLRP3， apoptosis-associated speck-like protein containing a CARD （ASC）， cysteinyl aspartate-specific protease-1 （Caspase-1）， Caspase-1 p20， gasdermin D （GSDMD）， GSDMD N-terminal active fragment （GSDMD-N）， interleukin-1β （IL-1β）， and IL-18 in lung tissue. Serum IL-1β and IL-18 levels were measured by ELISA. ResultsCompared with the blank group， the model group showed lassitude， fatigue， tachypnea， and audible phlegm sounds， and lung function significantly declined （P0.01）. Pulmonary emphysema and inflammatory cell infiltration were obvious. The level of inflammatory cells in BALF increased significantly （P0.05）. The number of TUNEL-positive cells increased （P0.01）. Levels of LDH， ROS， and MDA in BALF increased significantly （P0.01）， while GSH and SOD activities decreased significantly （P0.01）. Lung tissue cells showed irregular morphology， swollen mitochondria， disrupted cell membranes， and abundant vesicles， i.e.， pyroptotic bodies. Protein levels of TXNIP， NLRP3， ASC， Caspase-1， Caspase-1 p20， GSDMD， GSDMD-N， IL-1β， and IL-18 in lung tissue were significantly elevated （P0.01）， and serum IL-1β and IL-18 levels also increased significantly （P0.01）. Compared with the model group， each medication group showed alleviation of qi deficiency symptoms and improved lung function （P0.01）. Pulmonary emphysema and inflammatory cell infiltration were reduced. Inflammatory cell levels decreased （P0.05）. The number of TUNEL-positive cells decreased significantly （P0.01）. Levels of LDH， ROS， and MDA decreased significantly （P0.05）， while GSH and SOD activities significantly increased （P0.01）. Morphological and structural damage in lung tissue was improved to varying degrees. Protein levels of TXNIP， NLRP3， ASC， Caspase-1， Caspase-1 p20， GSDMD， GSDMD-N， IL-1β， and IL-18 in lung tissue significantly decreased （P0.01）， and serum IL-1β and IL-18 levels also decreased significantly （P0.05）. ConclusionSQWF can improve lung function and alleviate inflammatory responses in COPD rats. Its mechanism may be related to regulating the ROS/TXNIP/NLRP3 pathway and inhibiting pyroptosis.

ObjectiveTo investigate the effects and underlying mechanisms of Shenqi Wenfei prescription （SQWF） on chronic obstructive pulmonary disease （COPD）. MethodsA rat model of COPD with lung Qi deficiency was established using lipopolysaccharide （LPS） combined with cigarette smoke. Forty-eight SD rats were randomly divided into a blank group， a model group， low-， medium-， and high-dose SQWF groups （2.835， 5.67， 11.34 g·kg^-1）， and a Yupingfeng group （1.35 g·kg^-1）. Drug administration began on day 29 after modeling and continued for 2 weeks. The general condition of the rats was observed， and the lung function in each group was assessed. Hematoxylin-eosin （HE） staining was used to observe pathological changes in lung tissue. The proportion of inflammatory cells in bronchoalveolar lavage fluid （BALF） was measured. Apoptosis in lung tissue was examined by terminal deoxynucleotidyl transferase-mediated dUTP nick end-labeling （TUNEL） staining. The release level of lactate dehydrogenase （LDH） in BALF was detected by a microplate assay. Reactive oxygen species （ROS） levels in lung tissue were detected using fluorescent probes. The levels of malondialdehyde （MDA）， total superoxide dismutase （SOD）， and reduced glutathione （GSH） in BALF were measured by biochemical methods. Ultrastructural changes in lung cells were observed via transmission electron microscopy. Double immunofluorescence staining was performed to detect the expression of thioredoxin-interacting protein （TXNIP） and nucleotide-binding oligomerization domain-like receptor protein 3 （NLRP3） in lung tissue. Western blot analysis was used to detect the protein expression of TXNIP， NLRP3， apoptosis-associated speck-like protein containing a CARD （ASC）， cysteinyl aspartate-specific protease-1 （Caspase-1）， Caspase-1 p20， gasdermin D （GSDMD）， GSDMD N-terminal active fragment （GSDMD-N）， interleukin-1β （IL-1β）， and IL-18 in lung tissue. Serum IL-1β and IL-18 levels were measured by ELISA. ResultsCompared with the blank group， the model group showed lassitude， fatigue， tachypnea， and audible phlegm sounds， and lung function significantly declined （P0.01）. Pulmonary emphysema and inflammatory cell infiltration were obvious. The level of inflammatory cells in BALF increased significantly （P0.05）. The number of TUNEL-positive cells increased （P0.01）. Levels of LDH， ROS， and MDA in BALF increased significantly （P0.01）， while GSH and SOD activities decreased significantly （P0.01）. Lung tissue cells showed irregular morphology， swollen mitochondria， disrupted cell membranes， and abundant vesicles， i.e.， pyroptotic bodies. Protein levels of TXNIP， NLRP3， ASC， Caspase-1， Caspase-1 p20， GSDMD， GSDMD-N， IL-1β， and IL-18 in lung tissue were significantly elevated （P0.01）， and serum IL-1β and IL-18 levels also increased significantly （P0.01）. Compared with the model group， each medication group showed alleviation of qi deficiency symptoms and improved lung function （P0.01）. Pulmonary emphysema and inflammatory cell infiltration were reduced. Inflammatory cell levels decreased （P0.05）. The number of TUNEL-positive cells decreased significantly （P0.01）. Levels of LDH， ROS， and MDA decreased significantly （P0.05）， while GSH and SOD activities significantly increased （P0.01）. Morphological and structural damage in lung tissue was improved to varying degrees. Protein levels of TXNIP， NLRP3， ASC， Caspase-1， Caspase-1 p20， GSDMD， GSDMD-N， IL-1β， and IL-18 in lung tissue significantly decreased （P0.01）， and serum IL-1β and IL-18 levels also decreased significantly （P0.05）. ConclusionSQWF can improve lung function and alleviate inflammatory responses in COPD rats. Its mechanism may be related to regulating the ROS/TXNIP/NLRP3 pathway and inhibiting pyroptosis.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

BACKGROUND:One of the advantages of clear aligner treatment is molar distalization.However,tooth tilting movement and loss of anterior anchorage may occur during treatment.There are few studies on whether these problems can be improved by selecting clear aligners with different thicknesses and edges to improve the clinical treatment effect.OBJECTIVE:To analyze the control ability of clear aligners with different thickness and edges on the central incisor,lateral incisor,and second molar when pushing the maxillary second molar distally by three-dimensional finite element analysis.METHODS:Three-dimensional finite element analysis models of bilateral maxillary second molar distalization with clear aligner,maxillary dentition,periodontal ligament,and alveolar bone with different thicknesses and margins were established by Mimics,Geomagic Wrap,3-matic and SolidWorks software,respectively.There were 16 combinations of four thicknesses(0.4,0.5,0.625,and 0.75 mm)and four margins(scallop,straight,straight extension 2 mm and straight extension 4 mm).The data were imported into Ansys Workbench software for design and solution.The mean value,peak value and distribution of the periodontal ligament equivalent stress of the second molar,the equivalent stress and the maximum initial displacement of the second molar,and the control ability of each appliance on the second molar,central incisor,and lateral incisor were analyzed.RESULTS AND CONCLUSION:(1)The mean equivalent stress of periodontal ligament of the second molar,the equivalent stress of the second molar and the maximum initial displacement of the second molar increased with the extension of the appliance edge and the increase of the thickness of the appliance in the 16 groups of models.(2)When the thickness of appliances was the same,the maximum equivalent stress of the second molar in the linear appliance group was the highest,and the maximum equivalent stress of the second molar in the linear extended appliance group was greater than that in the scallop appliance group.When the edge of the appliance was the same,the periodontal ligament equivalent stress peak of the second molar increased with the increase of the thickness of the appliance.The equivalent stress distribution in the periodontal ligament of the second molar in the linear extendable appliance group was more uniform than that in the scallop appliance group and the linear appliance group.(3)When the thickness of the appliance was the same,the scallop-shaped appliance had the worst control on the second molar.When the edge of the appliance was the same,with the increase of the thickness of the appliance,the control of the second molar by the linear extender appliance was gradually stronger than that by the linear appliance.The control of the central incisor was stronger and more stable with the linear extended 2 mm appliance,while the control of the lateral incisor was stronger and more stable with the linear appliance.(4)The results showed that when using clear aligners to push molars distally,extending the edge of the appliance could improve the control of the molars and reduce the tilting movement of the teeth.The design of a straight extension margin of 2 mm for the central incisor and a straight edge for the lateral incisor can enhance the control of the anchorage incisor and reduce the labial inclination of the anterior teeth.

Depressive disorder is a mental illness characterized by poor mood and cognitive dysfunction caused by a range of complicated factors. Antidepressants have strong short-term efficacy in clinical application, yet with significant adverse effects and resistance in long-term use. Essential oils are small molecular compounds mainly composed of monoterpenes and sesquiterpenes, most of which are characterized by aromatic odors, easy permeability through the blood-brain barrier, and low toxic side effects. Volatile oil from traditional Chinese medicine can regulate neurotransmitter monoamine, hypothalamic-pituitary-adrenal axis, brain-derived neurotrophic factor, neuroinflammation and oxidative stress, and intestinal microbiota-gut-brain axis to exert an antidepressant effect through multiple pathways and targets. This review summarizes the main antidepressant chemical components of essential oil of traditional Chinese medicine, their pharmacological mechanisms and clinical application, aiming to provide some reference for further development and clinical application of essential oil of traditional Chinese medicine.

OBJECTIVE: To evaluate the short-and medium-term efficacy of posterior medial branch block in the treatment of persistent pain after percutaneous vertebral augmentation. METHODS: From January 2018 to January 2023, a total of 1, 062 patients with osteoporotic vertebral compression fractures underwent percutaneous vertebral augmentation. Among them, 32 elderly patients who experienced persistent low back pain after surgery and subsequently received posterior medial branch block and cryoablation were included. Six patients died during follow-up, leaving 26 patients for final analysis (1 male, 25 females). The mean age was (82.96±5.66) years (ranged, 76 to 94 years). The mean body mass index was (23.76±3.08) kg·m^-2(ranged 18.1 to 27.2 kg·m^-2). The bone mineral density T-value ranged from -2.5 to -4.3 with a mean of (-3.09±0.56). The mean volume of bone cement injected was 6.00 (5.38, 7.00) ml. Fracture locations were T₁₁ (2 cases), T₁₂ (7 cases), L₁ (10 cases), L₂ (6 cases), and L₃ (1 case). The mean interval from vertebral augmentation to block treatment was (7.12±2.22) months (rangd 6 to 12 months). The vertebral augmentation procedures were percutaneous kyphoplasty(PKP) in 12 cases and percutaneous vertebroplasty (PVP) in 14 cases. At the 2nd week, 3rd month, and 6th month after the block, the numerical rating scale(NRS), Oswestry disability index(ODI), patient satisfaction, and pain relief rate at the 6th month were evaluated. Relationships between pain relief rate at the 6th month after the last treatment and possible influencing factors were analyzed. RESULTS: Compared with X-ray films after percutaneous vertebral augmentation, the X-ray films before block showed an increase in kyphotic angle and vertebral compression rate, with statistically significant differences(P<0.05). At the 2nd week, 3rd month, and 6th month after posterior medial branch block and cryoablation, NRS and ODI scores were significantly lower than before the block(P<0.05). Among the 26 patients, 5 received additional cryoablation. At the 6th month after the last treatment, 19 patients reported excellent or good satisfaction. Univariate binary Logistic analysis showed all P>0.05, and no independent factor affecting final satisfaction or pain relief at 6 months after the last treatment was identified. CONCLUSION Posterior medial branch block(with cryoablation) can effectively improve short-and medium-term symptoms and function in patients with persistent axial low back pain after percutaneous vertebral augmentation for osteoporotic vertebral fractures.
Humans ; Male ; Female ; Aged ; Spinal Fractures/surgery* ; Aged, 80 and over ; Osteoporotic Fractures/surgery* ; Vertebroplasty/adverse effects* ; Nerve Block/methods*

Surgical methods for varicocele remain controversial. This study intends to evaluate the efficacy and safety of different surgical approaches for treating varicocele through a network meta-analysis (NMA). PubMed, Embase, Cochrane, and Web of Science databases were thoroughly searched. In total, 13 randomized controlled trials (RCTs) and 24 cohort studies were included, covering 9 different surgical methods. Pairwise meta-analysis and NMA were performed by means of random-effects models, and interventions were ranked based on the surface under the cumulative ranking curve (SUCRA). According to the SUCRA, microsurgical subinguinal varicocelectomy (MSV; 91.6%), microsurgical retroperitoneal varicocelectomy (MRV; 78.2%), and microsurgical inguinal varicocelectomy (MIV; 76.7%) demonstrated the highest effectiveness in reducing postoperative recurrence rates. In this study, sclerotherapy embolization (SE; 87.2%), MSV (77.9%), and MIV (67.7%) showed the best results in lowering the risk of hydrocele occurrence. MIV (82.9%), MSV (75.9%), and coil embolization (CE; 58.7%) were notably effective in increasing sperm motility. Moreover, CE (76.7%), subinguinal approach varicocelectomy (SV; 69.2%), and SE (55.7%) were the most effective in increasing sperm count. SE (82.5%), transabdominal laparoscopic varicocelectomy (TLV; 76.5%), and MRV (52.7%) were superior in shortening the length of hospital stay. The incidence rates of adverse events for MRV (0), SE (3.3%), and MIV (4.1%) were notably low. Cluster analyses indicated that MSV was the most effective in the treatment of varicocele. Based on the existing evidence, MSV may represent the optimal choice for varicocele surgery. However, selecting clinical surgical strategies requires consideration of various factors, including patient needs, surgeon experience, and the learning curve.
Humans ; Male ; Embolization, Therapeutic/methods* ; Microsurgery/methods* ; Randomized Controlled Trials as Topic ; Sclerotherapy/methods* ; Treatment Outcome ; Urologic Surgical Procedures, Male/methods* ; Varicocele/surgery*

OBJECTIVES: To investigate the clinical features of children with STAT gene mutations, and to explore corresponding immunotherapy strategies. METHODS: A retrospective analysis was performed for the clinical data of 10 children with STAT gene mutations who were admitted to the Department of Pediatrics of the First Affiliated Hospital of Guangzhou Medical University, from October 2015 to October 2024. Exploratory immunotherapy was implemented in some refractory cases, and the changes in symptoms, imaging manifestations, and cytokine levels were assessed after treatment. RESULTS: For the 10 children, the main clinical manifestations were recurrent rash since birth (7/10), cough (8/10), wheezing (5/10), expectoration (4/10), and purulent nasal discharge (4/10). Genotyping results showed that there was one child with heterozygous loss-of-function (LOF) mutation in the STAT1 gene, four children with heterozygous LOF mutation in the STAT3 gene, and five children with heterozygous gain-of-function (GOF) mutation in the STAT3 gene. Two children with LOF mutation in the STAT3 gene showed decreased interleukin-6 levels and improved clinical symptoms and imaging findings after omalizumab treatment. Three children with GOF mutation in the STAT3 gene achieved effective disease control after treatment with methylprednisolone (0.5 mg/kg per day). Two children with GOF mutation in the STAT3 gene received treatment with JAK inhibitor and then showed some improvement in symptoms. CONCLUSIONS STAT gene mutation screening should be considered for children with recurrent rash and purulent respiratory tract infections. Targeted immunotherapy may improve prognosis in patients with no response to conventional treatment.
Humans ; Male ; Immunotherapy ; Female ; Child, Preschool ; Child ; Gain of Function Mutation ; Retrospective Studies ; Infant ; Loss of Function Mutation ; STAT Transcription Factors/genetics*

OBJECTIVES: Prolonged invasive mechanical ventilation is associated with increased risks of severe complications such as retinopathy of prematurity and bronchopulmonary dysplasia. Although neonatal intensive care unit (NICU) follow the principle of early extubation, extubation failure rates remain high, and reintubation may further increase the risk of adverse outcomes. This study aims to identify risk factors and short-term prognosis associated with first extubation failure in neonates, to provide evidence for effective clinical intervention strategies. METHODS: Clinical data of neonates who received invasive ventilation in the NICU of Children's Hospital of Nanjing Medical University from January 1, 2019, to December 31, 2021, were retrospectively collected. Neonates were divided into a successful extubation group and a failed extubation group based on whether reintubation occurred within 72 hours after the first extubation. Risk factors and short-term outcomes related to extubation failure were analyzed. RESULTS: A total of 337 infants were included, with 218 males (64.69%). Initial extubation failed in 34 (10.09%) infants. Compared with the successful extubation group, the failed extubation group had significantly lower gestational age [(31.37±5.14) weeks vs (34.44±4.07) weeks], age [2.5 (1.00, 8.25) h vs 5 (1.00, 22.00) h], birth weight [(1 818.97±1128.80) g vs (2 432.18±928.94) g], 1-minute Apgar score (6.91±1.90 vs 7.68±2.03), and the proportion of using mask oxygenation after extubation (21% vs 46%) (all P<0.05). Conversely, compared with the successful extubation group, the failed extubation group had significantly higher rates of vaginal delivery (59% vs 32%), caffeine use during mechanical ventilation (71% vs 38%), dexamethasone use at extubation (44% vs 17%), the highest positive end-expiratory pressure level within 72 hours post-extubation [6(5.00, 6.00) cmH₂O vs 5 (0.00, 6.00) cmH₂O] (1 cmH₂O=0.098 kPa), the highest FiO₂ within 72 hours post-extubation [(34.35±5.95)% vs (30.22±3.58)%], and duration of noninvasive intermittent positive pressure ventilation after extubation [0.5 (0.00, 42.00) hours vs 0 (0, 0) hours] (all P<0.05). Multivariate analysis identified gestational age <28 weeks (OR=5.570, 95% CI 1.866 to 16.430), age at NICU admission (OR=0.959, 95% CI 0.918 to 0.989), and a maximum FiO₂≥35% within 72 hours post-extubation (OR=4.541, 95% CI 1.849 to 10.980) as independent risk factors for extubation failure (all P<0.05). Additionally, the failed extubation group exhibited significantly higher incidences of necrotizing enterocolitis grade II or above, moderate-to-severe bronchopulmonary dysplasia, severe bronchopulmonary dysplasia, retinopathy of prematurity, treatment abandonment due to poor prognosis, and discharge on home oxygen therapy (all P<0.05). Total hospital length of stay and total hospitalization costs were also significantly increased in the failed extubation group (all P<0.05). CONCLUSIONS Gestational age <28 weeks, younger age at NICU admission, and FiO₂≥35% after extubation are high-risk factors for first extubation failure in neonates. Extubation failure markedly increases the risk of adverse clinical outcomes.
Humans ; Infant, Newborn ; Male ; Female ; Airway Extubation/adverse effects* ; Risk Factors ; Retrospective Studies ; Respiration, Artificial/methods* ; Intensive Care Units, Neonatal ; Prognosis ; Gestational Age ; Bronchopulmonary Dysplasia ; Infant, Premature ; Treatment Failure ; Intubation, Intratracheal

HDAC7, a member of class IIa HDACs, plays a pivotal regulatory role in tumor, immune, fibrosis, and angiogenesis, rendering it a potential therapeutic target. Nevertheless, due to the high similarity in the enzyme active sites of class IIa HDACs, inhibitors encounter challenges in discerning differences among them. Furthermore, the substitution of key residue in the active pocket of class IIa HDACs renders them pseudo-enzymes, leading to a limited impact of enzymatic inhibitors on their function. In this study, proteolysis targeting chimera (PROTAC) technology was employed to develop HDAC7 drugs. We developed an exceedingly selective HDAC7 PROTAC degrader B14 which showcased superior inhibitory effects on cell proliferation compared to TMP269 in various diffuse large B cell lymphoma (DLBCL) and acute myeloid leukemia (AML) cells. Subsequent investigations unveiled that B14 disrupts BCL6 forming a transcriptional inhibition complex by degrading HDAC7, thereby exerting proliferative inhibition in DLBCL. Our study broadened the understanding of the non-enzymatic functions of HDAC7 and underscored the importance of HDAC7 in the treatment of hematologic malignancies, particularly in DLBCL and AML.