Based on whole-genome identification of the TPS gene family in Perilla frutescens and screening, cloning, bioinformatics, and expression analysis of the synthetic enzyme for the insect-resistant component germacrene D, this study lays the foundation for understanding the biological function of the TPS gene family and the insect resistance mechanism in P. frutescens. This study used bioinformatics tools to identify the TPS gene family of P. frutescens based on its whole genome and predicted the physicochemical properties, systematic classification, and promoter cis-elements of the proteins. The relative content of germacrene D was detected in both normal and insect-infested leaves of P. frutescens, and the germacrene D synthase was screened and isolated. Gene cloning, bioinformatics analysis, and expression profiling were then performed. The results showed that a total of 99 TPS genes were identified in the genome, which were classified into the TPS-a, TPS-b, TPS-c, TPS-e/f, and TPS-g subfamilies. Conserved motif analysis showed that the TPS in P. frutescens has conserved structural characteristics within the same subfamily. Promoter cis-element analysis predicted the presence of light-responsive elements, multiple hormone-responsive elements, and stress-responsive elements in the TPS family of P. frutescens. Transcriptome data revealed that most of the TPS genes in P. frutescens were highly expressed in the leaves. GC-MS analysis showed that the relative content of germacrene D significantly increased in insect-damaged leaves, suggesting that it may act as an insect-resistant component. The germacrene D synthase gene was screened through homologous protein binding gene expression and was found to belong to the TPS-a subfamily, encoding a 64.89 kDa protein. This protein was hydrophilic, lacked a transmembrane structure and signal peptide, and was predominantly expressed in leaves, with significantly higher expression in insect-damaged leaves compared to normal leaves. In vitro expression results showed that germacrene D synthase tended to form inclusion bodies. Molecular docking showed that farnesyl pyrophosphate(FPP) fell into the active pocket of the protein and interacted strongly with six active sites. This study provides a foundation for further research on the biological functions of the TPS gene family in P. frutescens and the molecular mechanisms underlying its insect resistance.
Perilla frutescens/chemistry* ; Plant Proteins/chemistry* ; Multigene Family ; Sesquiterpenes, Germacrane/metabolism* ; Alkyl and Aryl Transferases/chemistry* ; Phylogeny ; Gene Expression Regulation, Plant

Asarum forbesii is a perennial herb born in a shaded and humid environment, which is warm in nature. With the efficacy of warming lung, resolving fluid retention, and relieving coughs, it can be used to treat the syndrome of cold fluid accumulating in lung. To investigate the effects of different shading conditions on the composition and efficacy of A. forbesii, this study planted A. forbesii under 20% natural light(NL20), 40% natural light(NL40), 60% natural light(NL60), and 80% natural light(NL80) and utilized ultra performance liquid chromatography(UPLC) and micro broth 2-fold dilution method to detect the volatile chemical compounds and the minimum inhibitory concentration. At the same time, the study investigated the effects of A. forbesii grown under different shading conditions on the signs, pathological changes of lung tissues, serum cytokine levels, activities of mitochondrial respiratory chain complexes Ⅰ-Ⅴ in lung tissues, and relative expression of related genes of mice with syndrome of cold fluid accumulating in lung. The results indicated that with the increase of shading, the content of kakuol, methyl eugenol, and asarinin in A. forbesii and the antibacterial effect showed a tendency of increasing first and then decreasing, and the NL40 group was significantly better than the other groups. Under the conditions of NL20 and NL40, A. forbesii significantly alleviated the pathological damage to lung tissues, restored the homeostasis of the lung, and enhanced the energy metabolism level of mice with syndrome of cold fluid accumulating in lung. In addition, A. forbesii planted under the two conditions reduced the content of interleukin-8(IL-8), interleukin-13(IL-13), tumor necrosis factor-α(TNF-α), and mucin 5AC(MUC5AC), increased the levels of interleukin-10(IL-10) and aquaporin 1(AQP1), lowered the expression of MMP9, VEGF, TGF-β, and MAPK3. In conclusion, the therapeutic effect of A. forbesii on the syndrome of cold fluid accumulating in lung was positively correlated with the degree of shading, and the chemical composition and efficacy of warming lung and resolving fluid retention were optimal under the conditions of NL20-NL40. This study can provide reference for the pharmacological research and cultivation of A. forbesii.
Animals ; Mice ; Lung/pathology* ; Drugs, Chinese Herbal/administration & dosage* ; Male ; Light ; Cytokines/genetics* ; Humans

The triterpenoid saponins of Centella asiatica, including asiaticoside, madecassoside, asiatic acid, and madecassic acid, are pivotal bioactive compounds of the plant. These constituents exhibit a spectrum of pharmacological activities, such as antioxidant, antitumor, and antidepressant effects, promotion of wound healing, and enhancement of microcirculation. Owing to these therapeutic properties, C. asiatica is widely employed in pharmaceutical and cosmetic industries. However, the escalating global demand for its extracts has led to potential supply shortages, prompting researchers to use multiple strategies such as multi-omics, molecular biology, and synthetic biology to conduct extensive studies. These studies encompass the elucidation of the biosynthetic pathways of triterpenoid saponins in C. asiatica, metabolic regulation, the hormonal induction of secondary metabolite synthesis, and the application of biotechnological strategies for natural product production to increase the yield of secondary metabolites in C. asiatica, or to produce active components via microbial chassis, thus satisfying market demands and promoting the sustainable exploitation of wild C. asiatica resources. This article first introduced the triterpenoid saponins of C. asiatica and their biological activities, then summarized the latest research advancements in their biosynthetic pathways, metabolic regulation, and heterologous biosynthesis, and provided an outlook on future development directions, with the aim of providing reference for comprehensive resource development and biotechnological synthesis of active components from C. asiatica.
Centella/genetics* ; Triterpenes/chemistry* ; Biosynthetic Pathways ; Humans ; Drugs, Chinese Herbal/chemistry* ; Plant Extracts

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

BACKGROUND: The clinical impact of post-percutaneous coronary intervention (PCI) quantitative flow ratio (QFR) in patients treated with PCI for chronic total occlusion (CTO) was still undetermined. METHODS: All CTO vessels treated with successful anatomical PCI in patients from PANDA III trial were retrospectively measured for post-PCI QFR. The primary outcome was 2-year vessel-oriented composite endpoints (VOCEs, composite of target vessel-related cardiac death, target vessel-related myocardial infarction, and ischemia-driven target vessel revascularization). Receiver operator characteristic curve analysis was conducted to identify optimal cutoff value of post-PCI QFR for predicting the 2-year VOCEs, and all vessels were stratified by this optimal cutoff value. Cox proportional hazards models were employed to calculate the hazard ratio (HR) with 95% CI. RESULTS: Among 428 CTO vessels treated with PCI, 353 vessels (82.5%) were analyzable for post-PCI QFR. 31 VOCEs (8.7%) occurred at 2 years. Mean value of post-PCI QFR was 0.92 ± 0.13. Receiver operator characteristic curve analysis shown the optimal cutoff value of post-PCI QFR for predicting 2-year VOCEs was 0.91. The incidence of 2-year VOCEs in the vessel with post-PCI QFR < 0.91 (n = 91) was significantly higher compared with the vessels with post-PCI QFR ≥ 0.91 (n = 262) (22.0% vs. 4.2%, HR = 4.98, 95% CI: 2.32-10.70). CONCLUSIONS Higher post-PCI QFR values were associated with improved prognosis in the PCI practice for coronary CTO. Achieving functionally optimal PCI results (post-PCI QFR value ≥ 0.91) tends to get better prognosis for patients with CTO lesions.

BACKGROUND: The atherogenic index of plasma (AIP) has been shown to be positively correlated with cardiovascular disease in previous studies. However, it is unclear whether elderly people with long-term high AIP levels are more likely to develop coronary heart disease (CHD). Therefore, the aim of this study was to investigate the relationship between AIP trajectory and CHD incidence in elderly people. METHODS: 19,194 participants aged ≥ 60 years who had three AIP measurements between 2018 and 2020 were included in this study. AIP was defined as log₁₀ (triglyceride/high-density lipoprotein cholesterol). The group-based trajectory model was used to identify different trajectory patterns of AIP from 2018 to 2020. Cox proportional hazards models were used to estimate the hazard ratio (HR) with 95% CI of CHD events between different trajectory groups from 2020 to 2023. RESULTS: Three different trajectory patterns were identified through group-based trajectory model: the low-level group (n = 7410, mean AIP: -0.25 to -0.17), the medium-level group (n = 9981, mean AIP: 0.02-0.08), and the high-level group (n = 1803, mean AIP: 0.38-0.42). During a mean follow-up of 2.65 years, a total of 1391 participants developed CHD. After adjusting for potential confounders, compared with the participants in the low-level group, the HR with 95% CI of the medium-level group and the high-level group were estimated to be 1.24 (1.10-1.40) and 1.43 (1.19-1.73), respectively. These findings remained consistent in subgroup analyses and sensitivity analyses. CONCLUSIONS There was a significant correlation between persistent high AIP level and increased CHD risk in the elderly. This suggests that monitoring the long-term changes in AIP is helpful to identify individuals at high CHD risk in elderly people.

OBJECTIVE: We aimed to investigate the patterns of fasting blood glucose (FBG) trajectories and analyze the relationship between various occupational hazard factors and FBG trajectories in male steelworkers. METHODS: The study cohort included 3,728 workers who met the selection criteria for the Tanggang Occupational Cohort (TGOC) between 2017 and 2022. A group-based trajectory model was used to identify the FBG trajectories. Environmental risk scores (ERS) were constructed using regression coefficients from the occupational hazard model as weights. Univariate and multivariate logistic regression analyses were performed to explore the effects of occupational hazard factors using the ERS on FBG trajectories. RESULTS: FBG trajectories were categorized into three groups. An association was observed between high temperature, noise exposure, and FBG trajectory ( P < 0.05). Using the first quartile group of ERS1 as a reference, the fourth quartile group of ERS1 had an increased risk of medium and high FBG by 1.90 and 2.21 times, respectively (odds ratio [ OR] = 1.90, 95% confidence interval [ CI]: 1.17-3.10; OR = 2.21, 95% CI: 1.09-4.45). CONCLUSION An association was observed between occupational hazards based on ERS and FBG trajectories. The risk of FBG trajectory levels increase with an increase in ERS.
Humans ; Male ; Adult ; Blood Glucose/analysis* ; China ; Prospective Studies ; Occupational Exposure/adverse effects* ; Risk Factors ; Middle Aged ; Steel ; Fasting/blood* ; Metal Workers ; East Asian People

ObjectiveDetection and quantification of RNA synthesis in cells is a widely used technique for monitoring cell viability, health, and metabolic rate.After exposure to environmental stimuli, both the internal reference gene and target gene would be degraded. As a result, it is imperative to consider the accurate capture of nascent RNA and the detection of transcriptional levels of RNA following environmental stimulation. This study aims to create a Click Chemistry method that utilizes its property to capture nascent RNA from total RNA that was stimulated by the environment. MethodsThe new RNA was labeled with 5-ethyluridine (5-EU) instead of uracil, and the azido-biotin medium ligand was connected to the magnetic sphere using a combination of “Click Chemistry” and magnetic bead screening. Then the new RNA was captured and the transcription rate of 16S rRNA was detected by fluorescence molecular beacon (M.B.) and quantitative reverse transcription PCR (qRT-PCR). ResultsThe bacterial nascent RNA captured by “Click Chemistry” screening can be used as a reverse transcription template to form cDNA. Combined with the fluorescent molecular beacon M.B.1, the synthesis rate of rRNA at 37℃ is 1.2 times higher than that at 15℃. The 16S rRNA gene and cspI gene can be detected by fluorescent quantitative PCR,it was found that the measured relative gene expression changes were significantly enhanced at 25℃ and 16℃ when analyzed with nascent RNA rather than total RNA, enabling accurate detection of RNA transcription rates. ConclusionCompared to other article reported experimental methods that utilize screening magnetic columns, the technical scheme employed in this study is more suitable for bacteria, and the operation steps are simple and easy to implement, making it an effective RNA capture method for researchers.

Objective:To carry out cytogenetic and molecular genetic analysis for two infertile patients carrying rare small supernumerary marker chromosomes (sSMC).Methods:Two infertile patients who received reproductive and genetic counseling at CITIC Xiangya Reproductive and Genetic Hospital on October 31, 2018 and May 10, 2021, respectively were selected as the study subjects. The origin of sSMCs was determined by conventional G banding, fluorescence in situ hybridization (FISH) and copy number variation sequencing (CNV-seq). Microdissection combined with high-throughput whole genome sequencing (MicroSeq) was carried out to determine the fragment size and genomic information of their sSMCs. Results:For patient 1, G-banded karyotyping and FISH revealed that he has a karyotype of mos47, XY, del(16)(p10p12), + mar[65]/46, XY, del(16)(p10p12)[6]/48, XY, del(16)(p10p12), + 2mar[3].ish mar(Tel 16p-, Tel 16q-, CEP 16-, WCP 16+ ). CNV analysis has yielded a result of arr[GRCh37]16p12.1p11.2(24999364_33597595)×1[0.25]. MicroSeq revealed that his sSMC has contained the region of chromosome 16 between 24979733 and 34023115 (GRCh37). For patient 2, karyotyping and reverse FISH revealed that she has a karyotype of mos 47, XX, + mar[37]/46, XX[23].rev ish CEN5, and CNV analysis has yielded a result of seq[GRCh37]dup(5)(p12q11.2)chr5: g(45120001_56000000)dup[0.8]. MicroSeq results revealed that her sSMC has contained the region of chromosome 5 between 45132364 and 55967870(GRCh37). After genetic counseling, both couples had opted in vitro fertilization (IVF) treatment and preimplantation genetic testing (PGT). Conclusion:For individuals harboring sSMCs, it is vital to delineate the origin and structural characteristics of the sSMCs for their genetic counseling and reproductive guidance. Preimplantation genetic testing after microdissection combined with high-throughput whole genome sequencing (MicroSeq-PGT) can provide an alternative treatment for carrier couples with a high genetic risk.

Patients with severe trauma require an extremely timely treatment and transfusion plays an irreplaceable role in the emergency treatment of such patients. An increasing number of evidence-based medicinal evidences and clinical practices suggest that patients with severe traumatic bleeding benefit from early transfusion of low-titer group O whole blood or hemostatic resuscitation with red blood cells, plasma and platelet of a balanced ratio. However, the current domestic mode of blood supply cannot fully meet the requirements of timely and effective blood transfusion for emergency treatment of patients with severe trauma in clinical practice. In order to solve the key problems in blood supply and blood transfusion strategies for emergency treatment of severe trauma, Branch of Clinical Transfusion Medicine of Chinese Medical Association, Group for Trauma Emergency Care and Multiple Injuries of Trauma Branch of Chinese Medical Association, Young Scholar Group of Disaster Medicine Branch of Chinese Medical Association organized domestic experts of blood transfusion medicine and trauma treatment to jointly formulate Chinese expert consensus on blood support mode and blood transfusion strategies for emergency treatment of severe trauma patients ( version 2024). Based on the evidence-based medical evidence and Delphi method of expert consultation and voting, 10 recommendations were put forward from two aspects of blood support mode and transfusion strategies, aiming to provide a reference for transfusion resuscitation in the emergency treatment of severe trauma and further improve the success rate of treatment of patients with severe trauma.