ObjectiveTo investigate the efficacy and safety of Shuganning injection in the treatment of liver injury by observing the clinical outcome of patients with liver injury after treatment with Shuganning injection and comparing it with reduced glutathione （GSH）. MethodsThis study was conducted among 175 patients with liver injury who attended 6 hospitals in China （Beijing YouAn Hospital， Capital Medical University； Nanyang First People’s Hospital； The Second Affiliated Hospital of Xi’an Jiaotong University； The Fifth Medical Center of Chinese PLA General Hospital； The Third Hospital of Hebei Medical University； The Affiliated Hospital of Guizhou Medical University） from April 25， 2019 to February 28， 2022. The patients were divided into experimental group （89 patients treated with Shuganning injection） and control group （86 patients treated with GSH）， and the course of treatment was 4 weeks for both groups. Related indicators were recorded before treatment， after treatment， and after drug withdrawal for 8 weeks， including liver function parameters， blood biochemical parameters， blood lipids， coagulation profiles， liver fibrosis markers， traditional Chinese medicine （TCM） syndrome score， and ultrasound findings， as well as adverse events during treatment. The Wilcoxon rank-sum test was used for comparison of continuous data between two groups， and the chi-square test was used for comparison of categorical data between two groups. The Wilcoxon signed-rank test was used for comparison of observation indicators before treatment， at week 4 of treatment， and after drug withdrawal for 8 weeks. When the efficacy evaluation of TCM syndromes was used as the outcome， a pooled analysis was performed for the effective cases and the markedly effective cases， and a Logistic regression model was used to calculate the odds ratio （OR） and its 95%CI. ResultsAfter 4 weeks of treatment with Shuganning injection， the patients showed significant reductions in TCM syndrome score （P<0.001） and the levels of aspartate aminotransferase， alanine aminotransferase， total bilirubin， and direct bilirubin （all P<0.001） and a significant increase in the level of albumin （P=0.002）， and these significant improvements persisted after drug withdrawal for 8 weeks. Furthermore， compared with the control group， the experimental group had a significantly higher proportion of patients assessed as effective or markedly effective cases （48.31% vs 32.56%， P=0.033）. Compared with the control group， the experimental group had a significantly greater change in TCM syndrome score at weeks 1-4 of treatment and after drug withdrawal for 8 weeks （P<0.05）. At week 4 of treatment， the experimental group had a significantly greater reduction in alanine aminotransferase than the control group （P<0.05）， and at week 8 after drug withdrawal， the experimental group had a significantly greater reduction in alanine aminotransferase and aspartate aminotransferase than the control group （all P<0.05）. One patient in the experimental group （1.12%） experienced an adverse event， which was determined to be associated with the progression of viral hepatitis. ConclusionShuganning injection can effectively improve liver injury， with good long-term efficacy and a low incidence rate of adverse reactions.

Polygonati Rhizoma demonstrates significant potential for addressing both chronic and hidden hunger. The supply of high-quality seedlings is a primary factor influencing the development of the Polygonati Rhizoma industry. Warm water soaking is often used in agriculture to promote the rapid germination of seeds, while its application and molecular mechanism in Polygonati Rhizoma have not been reported. To rapidly obtain high-quality seedlings, this study treated Polygonatum kingianum var. grandifolium seeds with sand storage at low temperatures, warm water soaking, and cultivation temperature gradients. The results showed that the culture at 25 ℃ or sand storage at 4 ℃ for 2 months rapidly broke the seed dormancy of P. kingianum var. grandifolium, while the culture at 20 ℃ or sand storage at 4 ℃ for 1 month failed to break the seed dormancy. Soaking seeds in 60 ℃ warm water further increased the germination rate, germination potential, and germination index. Specifically, the seeds soaked at 60 ℃ and cultured at 25 ℃ without sand storage treatment(Aa25) achieved a germination rate of 78. 67%±1. 53% on day 42 and 83. 40%±4. 63% on day 77. The seeds pretreated with sand storage at 4 ℃ for 2 months, soaked in 60 ℃ water, and then cultured at 25 ℃ achieved a germination rate comparable to that of Aa25 on day 77. Transcriptomic analysis indicated that warm water soaking might promote germination by triggering reactive oxygen species( ROS), inducing the expression of heat shock factors( HSFs) and heat shock proteins( HSPs), which accelerated DNA replication, transcript maturation, translation, and processing, thereby facilitating the accumulation and turnover of genetic materials. According to the results of indoor controlled experiments and field practices, maintaining a germination and seedling cultivation environment at approximately 25 ℃ was crucial for the one-year seedling cultivation of P. kingianum var. grandifolium.
Germination ; Seedlings/genetics* ; Water/metabolism* ; Seeds/metabolism* ; Polygonatum/genetics* ; Temperature ; Plant Proteins/genetics* ; Plant Dormancy

The genome tagging project (GTP) plays a pivotal role in addressing a critical gap in the understanding of protein functions. Within this framework, we successfully generated a human influenza hemagglutinin-tagged sperm-specific protein 411 (HA-tagged Ssp411) mouse model. This model is instrumental in probing the expression and function of Ssp411. Our research revealed that Ssp411 is expressed in the round spermatids, elongating spermatids, elongated spermatids, and epididymal spermatozoa. The comprehensive examination of the distribution of Ssp411 in these germ cells offers new perspectives on its involvement in spermiogenesis. Nevertheless, rigorous further inquiry is imperative to elucidate the precise mechanistic underpinnings of these functions. Ssp411 is not detectable in metaphase II (MII) oocytes, zygotes, or 2-cell stage embryos, highlighting its intricate role in early embryonic development. These findings not only advance our understanding of the role of Ssp411 in reproductive physiology but also significantly contribute to the overarching goals of the GTP, fostering groundbreaking advancements in the fields of spermiogenesis and reproductive biology.
Animals ; Female ; Humans ; Male ; Mice ; Spermatids/metabolism* ; Spermatogenesis/physiology* ; Spermatozoa/metabolism* ; Thioredoxins/genetics*

Poly(lactic-co-glycolide)(PLGA)is a key excipient in long-acting sustained-release preparations,and its degradation properties directly affect the drug release behavior.In this study,PLGA microspheres were prepared by microfluidic techniques,and the morphology changes of the microspheres were observed by scanning electron microscopy(SEM).In alkaline environment,due to the accelerated hydrolysis of ester bonds,the surface of the microspheres was rapidly dissolved and eroded,and the degradation rate was significantly higher than that in acidic environment.High temperature accelerated the degradation of PLGA microspheres.Under neutral and alkaline conditions,the microspheres showed aggregation and adhesion.Under acidic conditions,the microspheres gradually decomposed into irregular fragments.The high ionic strength further promoted the surface corrosion of the microspheres,especially under extreme pH conditions.Simultaneously,PLGA microspheres encapsulating coumarin were prepared to simulate the microsphere formulation.The release rate of coumarin after degradation of the microspheres under different conditions was observed by measuring the absorbance with ultraviolet-visible spectrophotometry.The results were consistent with those of the blank microspheres.This study revealed that the degradation of PLGA microspheres was significantly pH-dependent,temperature sensitive and ion strength responsive.These findings not only helped to understand and optimize the long-term stability and controlled release performance of drug-carrying microspheres,but also provided a theoretical basis for further improvement of PLGA-based drug carrier design.

BackgroundAttention deficit hyperactivity disorder （ADHD） is a neurodevelopmental disorder characterized by age-inappropriate inattention， excessive activities incongruous with setting， and emotional impulsivity. Subthreshold ADHD （sADHD） is clinically defined as the presence of ADHD symptoms that do not meet the full diagnostic criteria for ADHD. Children with sADHD exhibit deficits in executive function， demonstrate more conduct， learning， and anxiety-related problems compared to typically developing children， and show even poorer working memory performance than children diagnosed with ADHD. Currently， there is limited epidemiological research on sADHD in China， with few studies simultaneously investigating the prevalence of both ADHD and sADHD in children. ObjectiveTo investigate the prevalence of ADHD and sADHD among children aged 6–13 years in Chongqing， analyzing their distribution characteristics within this population， with the aim of providing references for developing preventive measures against both ADHD and sADHD. MethodsFrom October to November 2023， a total of 3 398 students in grades 1–6 from six primary schools in Jiangbei District， Chongqing were selected using a stratified cluster random sampling method. The occurrence of ADHD and sADHD was evaluated by using the short version （18-item version） of the Swanson， Nolan， and Pelham IV rating scales （SNAP-IV） and the Chinese vision of Schedule for Affective Disorder and Schizophrenia for School-aged Children-Present and Lifetime Version （K-SADS-PL）. ResultsThe ADHD detection rate among children in Chongqing was 1.90% （95% CI： 0.014–0.024）. Boys showed a significantly higher ADHD detection rate than girls （χ²=7.733， P=0.005）. No statistically significant differences were found in ADHD detection rates across different grades or age groups （χ²=7.347， 12.362， P>0.05）. The sADHD detection rate was 6.32% （95% CI： 0.054–0.072）. Similarly， boys exhibited significantly higher sADHD detection rates than girls （χ²=21.005， P<0.01）. Significant differences emerged across different grades （χ²=20.559， P=0.001）， while no statistically significant difference was observed in age groups （χ²=12.070， P=0.060）. ConclusionThe ADHD detection rates were comparable across all grade levels and age groups from 6–13 years old. Second-grade children demonstrated notably higher sADHD rates compared to other grades， while boys demonstrated higher prevalence rates than girls for both ADHD and sADHD. ［Funded by Science and Health Joint Medical Research Project in Jiangbei District， Chongqing City in the Second Half of 2023 （number， 2023JBKWLH022）］

Objective To compare the effect of small optical zone orthokeratology lenses(OK lenses)and repeated low-level red-light(RLRL)therapy in controlling myopia progression for adolescents,and the therapeutic effectiveness of RLRL is evaluated.Methods A retrospective analysis was conducted on the clinical data of 80 adolescent myopic patients in the First Affiliated Hospital of Army Medical University.The patients were divided into the RLRL group and the OK lenses group according to different intervention methods,with 40 cases in each group.Patients in the RLRL group received RLRL therapy combined with single-vision spectacles,and patients in the OK lenses group were treated with OK lenses.The changes of spherical equivalent(SE),axial length and subfoveal choroidal thickness(SFCT)1,3,6,and 12 months after treatment compared with the baseline,and color vision of patients were assessed.Based on the mean baseline axial length of the RLRL group,the patients in this group were subdivided into the short axial group and the long axial group,and the changes of the axial length and SFCT were further analyzed.Results The diopter 1,3,6,and 12 months after treatment in the RLRL group were not significantly different from the baseline(P>0.05).Axial lengths of patients in the RLRL group progressively shortened after treatment and returned close to the baseline 12 months after treatment.In contrast,axial lengths of patients in the OK lens continued to grow within 12 months after treatment;the axial lengths at each time point after treatment of patients in the two groups were significantly different from the baseline(P<0.05).The changes of axial length of patients in the RLRL group at each time point after treatment were significantly smaller than those in the OK lenses group(P<0.05).The SFCT changes of patients in the RLRL group at each time point after treatment were all greater than those in the OK lenses group(P<0.05).The SFCT at each time point after treatment in the RLRL group were significantly different from the baseline(P<0.05),whereas the SFCT at each time point after treatment in the OK lenses group were not significantly different from the baseline(P>0.05).The changes of axial length at each time point after treatment of patients in the long axial group were all greater than those in the short axial group(P<0.05);the SFCT changes 6 months after treatment of patients in the long axial group was greater than that in the short axial group(P<0.05);the SFCT at each time point after treatment of patients in the two groups were signifi-cantly different from the baseline(P<0.05).Color vision tests revealed no abnormities after treatment in the RLRL group and the OK lenses group.Conclusion RLRL therapy is effective in controlling myopia progression and demonstrates superior axial length control compared to orthokeratology lenses.

Objective To compare the effect of small optical zone orthokeratology lenses(OK lenses)and repeated low-level red-light(RLRL)therapy in controlling myopia progression for adolescents,and the therapeutic effectiveness of RLRL is evaluated.Methods A retrospective analysis was conducted on the clinical data of 80 adolescent myopic patients in the First Affiliated Hospital of Army Medical University.The patients were divided into the RLRL group and the OK lenses group according to different intervention methods,with 40 cases in each group.Patients in the RLRL group received RLRL therapy combined with single-vision spectacles,and patients in the OK lenses group were treated with OK lenses.The changes of spherical equivalent(SE),axial length and subfoveal choroidal thickness(SFCT)1,3,6,and 12 months after treatment compared with the baseline,and color vision of patients were assessed.Based on the mean baseline axial length of the RLRL group,the patients in this group were subdivided into the short axial group and the long axial group,and the changes of the axial length and SFCT were further analyzed.Results The diopter 1,3,6,and 12 months after treatment in the RLRL group were not significantly different from the baseline(P>0.05).Axial lengths of patients in the RLRL group progressively shortened after treatment and returned close to the baseline 12 months after treatment.In contrast,axial lengths of patients in the OK lens continued to grow within 12 months after treatment;the axial lengths at each time point after treatment of patients in the two groups were significantly different from the baseline(P<0.05).The changes of axial length of patients in the RLRL group at each time point after treatment were significantly smaller than those in the OK lenses group(P<0.05).The SFCT changes of patients in the RLRL group at each time point after treatment were all greater than those in the OK lenses group(P<0.05).The SFCT at each time point after treatment in the RLRL group were significantly different from the baseline(P<0.05),whereas the SFCT at each time point after treatment in the OK lenses group were not significantly different from the baseline(P>0.05).The changes of axial length at each time point after treatment of patients in the long axial group were all greater than those in the short axial group(P<0.05);the SFCT changes 6 months after treatment of patients in the long axial group was greater than that in the short axial group(P<0.05);the SFCT at each time point after treatment of patients in the two groups were signifi-cantly different from the baseline(P<0.05).Color vision tests revealed no abnormities after treatment in the RLRL group and the OK lenses group.Conclusion RLRL therapy is effective in controlling myopia progression and demonstrates superior axial length control compared to orthokeratology lenses.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Analyzing polysorbate 20(PS20)composition and the impact of each component on stability and safety is crucial due to formulation variations and individual tolerance.The similar structures and polarities of PS20 components make accurate separation,identification,and quantification challenging.In this work,a high-resolution quantitative method was developed using single-dimensional high-performance liquid chromatography(HPLC)with charged aerosol detection(CAD)to separate 18 key components with multiple esters.The separated components were characterized by ultra-high-performance liquid chro-matography-quadrupole time-of-flight mass spectrometry(UHPLC-Q-TOF-MS)with an identical gradient as the HPLC-CAD analysis.The polysorbate compound database and library were expanded over 7-time compared to the commercial database.The method investigated differences in PS20 samples from various origins and grades for different dosage forms to evaluate the composition-process relationship.UHPLC-Q-TOF-MS identified 1329 to 1511 compounds in 4 batches of PS20 from different sources.The method observed the impact of 4 degradation conditions on peak components,identifying stable components and their tendencies to change.HPLC-CAD and UHPLC-Q-TOF-MS results provided insights into fingerprint differences,distinguishing quasi products.