ObjectiveTo establish a high-performance liquid chromatography（HPLC） for the quantitative analysis of multiple components in Gegen Qinlian tablets， and to comprehensively evaluate the quality of samples from different manufacturers by integrating chemical pattern recognition and technique for order preference by similarity to ideal solution（TOPSIS）， in order to provide a reference basis for quality evaluation and control of Gegen Qinlian tablets. MethodsHPLC was employed to determine the contents of 10 components in 28 batches of Gegen Qinlian tablets collected from 6 manufacturers， and taking the detection results as variables， SIMCA 14.1 and SPSS 26.0 were employed for cluster analysis（CA）， principal component analysis（PCA）， and orthogonal partial least squares-discriminant analysis（OPLS-DA） to identify key components affecting the quality. Then， TOPSIS analysis was employed to rank the quality of Gegen Qinlian tablets from the 6 manufacturers and establish a comprehensive quality evaluation method. ResultsA quantitative method for Gegen Qinlian tablets was established. After methodological validation， the method was found to be stable and reliable， and could be used for the quantitative analysis of this preparation. The contents of 3′-hydroxy puerarin， puerarin， 3′-methoxy puerarin， daidzein， coptisine hydrochloride， epiberberine， jatrorrhizine hydrochloride， berberine hydrochloride， palmatine hydrochloride and baicalin in 28 batches of samples were 3.58-7.35， 24.88-42.32， 4.20-9.36， 4.33-7.60， 2.52-6.44， 0.93-4.10， 0.58-3.05， 10.68-22.92， 0.82-4.82， 11.73-60.16 mg·g^-1， respectively. Among them， puerarin， berberine hydrochloride and baicalin all met the limit requirements for this preparation specified in the 2025 edition of the Pharmacopoeia of the People's Republic of China. CA and PCA clustered the 28 batches of samples into 5 categories， PCA extracted 2 principal components with a cumulative variance contribution rate of 90.588%， and OPLS-DA screened out 4 differential markers with variable importance in the projection（VIP） values>1.0， namely baicalin， 3′-hydroxy puerarin， coptisine hydrochloride and palmatine hydrochloride， which might be the main components affecting the quality of Gegen Qinlian tablets. TOPSIS analysis showed that the comprehensive score of each evaluation index（C_i） values of different manufacturers were different. Among them， the C_i of manufacturer B was ranked higher， indicating potentially superior quality， while the C_i of manufacturer A was ranked lower， suggesting potentially inferior quality. ConclusionThis study establishes a quantitative method for Gegen Qinlian tablets， and the content uniformity of the same manufacturer is good， while there are differences in the contents of active components among different manufacturers. Through the chemical pattern recognition analysis， it is found that the content differences of Gegen Qinlian tablets may be related to baicalin， 3′-hydroxy puerarin， coptisine hydrochloride and palmatine hydrochloride.

ObjectiveTo investigate the effect and mechanism of modified Sini San in ameliorating intestinal mucosal barrier by observing its effects on short chain fatty acids （SCFAs） and high mobility group protein B1 （HMGB1）/receptor of advanced glycation end products （RAGE） signaling pathways in chronic stress rats. MethodsThe 50 male SD rats were randomly divided into control group，model group，low-dose modified Sini San group （7.34 g·kg^-1·d^-1），high-dose modified Sini San group （14.68 g·kg^-1·d^-1），and Fructo-oligosaccharides group （3.15 g·kg^-1·d^-1），with 10 rats in each group. Except for the control group，all other groups were subjected to chronic unpredictable stress/social isolation to create a chronic stress model for 6 weeks. After 4 weeks of modeling，each treatment group was given corresponding drugs by gavage for 2 weeks while modeling. The control group and model group were given the same volume of physiological saline. The effects of Modified Sini San on behaviors，body weight，Bristol score in feces and fecal moisture content in chronic stress rats were observed. Hematoxylin and eosin （HE） staining was used to observe the pathological changes in the cecum. The content of SCFAs in the cecal contents of rats were detected by Gas chromatography-mass spectrometry （GC-MS）. Immunohistochemistry and Western blot were used to detect the expression of HMGB1/RAGE pathway related proteins in cecal tissue. The levels of ZO-1，Occludin，and Claudin-1 in the cecal tissue were detected by enzyme linked immunosorbent assay （ELISA）. ResultsCompared with the model group，the sucrose preference rate，total distance traveled and the number of grid crossings in the open field test of rats in the low-dose modified Sini San group were obviously increased （P<0.05， P<0.01），and the immobility time in the open field test and the immobility time in the forced swimming test of rats in the low-dose and high-dose modified Sini San groups were obviously reduced （P<0.05， P<0.01）. Meanwhile，the Bristol score and fecal moisture content of rats in the low and high dose groups of modified Sini San were obviously increased （P<0.05）. The low-dose group of modified Sini San had intact mucosal layer structure in the cecal tissue and reduced infiltration of inflammatory cells. The content of SCFAs in the cecal contents increased，with a obviously increase in the content of acetic acid，propionic acid，butyric acid，and isovaleric acid （P<0.05， P<0.01） and the expression levels of HMGB1，RAGE，Toll-like receptor 2（TLR2），Toll-like receptor 4（TLR4），tumor necrosis factor-α（TNF-α），and nuclear factor kappa-B p65（NF-κB p65） proteins in cecal tissue were significantly decreased （P<0.05， P<0.01） in low-dose group of modified Sini San. Meanwhile，the contents of ZO-1，Occludin，and Claudin-1 in the cecal tissue were obviously increased （P<0.01） in low-dose group of modified Sini San. ConclusionModified Sini San can improve the function of intestinal mucosal barrier in chronic stress rats by increasing the content of SCFAs in the intestine and inhibiting the HMGB1/RAGE pathway.

Cytochrome P450 enzymes represent a class of heme-containing protease widely distributed across the biological kingdom. Endowed with a broad substrate scope, diverse catalytic reaction profiles, high regio- and stereoselectivity toward substrates, and mild catalytic conditions, these enzymes stand out as superior biocatalysts with good potential of application. As one of the primary producers of natural products, Streptomyces harbors a wealth of P450 enzymes and natural product biosynthetic gene clusters (BGCs) in its genome, making it a versatile treasure trove for the generation of bioactive small-molecule compounds. This review summarizes the catalytic reactions by Streptomyces-derived P450 enzymes in natural product biosynthesis and delineates the engineering strategies for addressing the practical application challenges of P450 enzymes, aiming to provide some reference and guidance for in-depth research on P450 enzymes and their applications.

BACKGROUND:Plate fixation is the mainstream method for the surgical treatment of distal femoral fractures.The intramedullary nailing has the advantages of minimally invasive,such as less soft tissue injury and bone blood supply destruction.At the same time,it is a central fixation and has better biomechanical effect.Therefore,retrograde intramedullary nailing has become another option for the internal fixation of distal femoral fractures.OBJECTIVE:The biomechanical characteristics of new retrograde intramedullary nail on lateral femur condyle,common femoral retrograde intramedullary nail,and lateral femur condyle anatomical locking plate for the treatment of A2-type distal femoral fractures were compared using finite element analysis,and the advantages of new retrograde intramedullary nail on lateral femur condyle was studied.METHODS:A new retrograde intramedullary nail on lateral femur condyle was designed,which was inserted into the bone cortex in front of the insertion point of the lateral collateral ligament of the lateral femoral condyle.A CT scan was performed on the lower limb bone of a male volunteer,and a three-dimensional model of the femur was established.The model was then segmented to create a three-dimensional model of a femoral distal A2-type fracture,The three-dimensional models of small(small group),standard type retrograde intramedullary nail on the lateral femoral condyle(standard group),common retrograde intramedullary needle(common group),and lateral femur condyle anatomical locking plate(plate group)were established respectively.The axial stresses of 600,1 800 N and the torsional load of 4 000,8 000 N·mm were applied to the models,and the displacement and stress of femur and the displacement,stress and shear force of internal fixators were observed in each group.RESULTS AND CONCLUSION:(1)When subjected to axial load of 600 and 1 800 N,the femoral peak displacement,the femoral peak stress,and the peak stress of interal fixation in the standard group were the lowest among the four groups.(2)When subjected to torsional load of 4 000 and 8 000 N·mm,the femoral peak displacement and peak displacement of the internal fixation in the standard group were the lowest among the four groups.(3)Compared with femoral lateral condylar locking plate and common retrograde intramedullary needle,the new retrograde intramedullary needle on lateral femur condyle has mechanical advantages of reducing stress concentration and decreasing the risk of internal fixation failure.

BACKGROUND:Plate fixation is the mainstream method for the surgical treatment of distal femoral fractures.The intramedullary nailing has the advantages of minimally invasive,such as less soft tissue injury and bone blood supply destruction.At the same time,it is a central fixation and has better biomechanical effect.Therefore,retrograde intramedullary nailing has become another option for the internal fixation of distal femoral fractures.OBJECTIVE:The biomechanical characteristics of new retrograde intramedullary nail on lateral femur condyle,common femoral retrograde intramedullary nail,and lateral femur condyle anatomical locking plate for the treatment of A2-type distal femoral fractures were compared using finite element analysis,and the advantages of new retrograde intramedullary nail on lateral femur condyle was studied.METHODS:A new retrograde intramedullary nail on lateral femur condyle was designed,which was inserted into the bone cortex in front of the insertion point of the lateral collateral ligament of the lateral femoral condyle.A CT scan was performed on the lower limb bone of a male volunteer,and a three-dimensional model of the femur was established.The model was then segmented to create a three-dimensional model of a femoral distal A2-type fracture,The three-dimensional models of small(small group),standard type retrograde intramedullary nail on the lateral femoral condyle(standard group),common retrograde intramedullary needle(common group),and lateral femur condyle anatomical locking plate(plate group)were established respectively.The axial stresses of 600,1 800 N and the torsional load of 4 000,8 000 N·mm were applied to the models,and the displacement and stress of femur and the displacement,stress and shear force of internal fixators were observed in each group.RESULTS AND CONCLUSION:(1)When subjected to axial load of 600 and 1 800 N,the femoral peak displacement,the femoral peak stress,and the peak stress of interal fixation in the standard group were the lowest among the four groups.(2)When subjected to torsional load of 4 000 and 8 000 N·mm,the femoral peak displacement and peak displacement of the internal fixation in the standard group were the lowest among the four groups.(3)Compared with femoral lateral condylar locking plate and common retrograde intramedullary needle,the new retrograde intramedullary needle on lateral femur condyle has mechanical advantages of reducing stress concentration and decreasing the risk of internal fixation failure.

Objective: To analyze the epidemiological characteristics of varicella among nursery children in Shenzhen from 2015 to 2024, and to evaluate the impact of optimizing varicella vaccine (VarV) immunization strategies on varicella incidence. Methods: Varicella incidence data for nursery children in Shenzhen from 2015 to 2024 were obtained from the China Disease Prevention and Control Information System. The study period was divided into three phases:one dose self pay VarV (January 2015 to October 2017), two dose self pay VarV (November 2017 to October 2019), and two dose free VarV (November 2019 to December 2024). Interrupted time series (ITS) analysis was conducted to assess changes in the level and trend of varicella incidence associated with each phase of policy implementation. Results: A total of 27 517 varicella cases was reported among nursery children from 2015 to 2024, with an average annual incidence of 514.01/100 000. During the same period, 136 clustered outbreaks were reported in nursery institutions, involving a cumulative total of 1 091 cases. ITS analysis showed that during the self pay 1 dose stage, the varicella incidence among nursery children showed an upward trend, with an average monthly increase of 2.58/100 000 (95% CI =2.21/ 100 000 -2.95/100 000, P <0.01). After the implementation of the self pay 2 dose strategy, the incidence decreased, with a change in incidence of -26.12/100 000 (95% CI =-37.30/100 000 to -14.94/100 000) and a change in slope of -2.65/100 000 (95% CI = -3.38/100 000 to -1.93/100 000)(all P <0.01). After the implementation of the free 2 dose strategy, the incidence decreased further, with a change in incidence of -40.03/100 000 (95% CI =-50.39/100 000 to -29.66/100 000, P <0.01) and a change in slope of -0.56/100 000 (95% CI =-1.20/100 000-0.08/100 000, P =0.09). Conclusion The gradual optimization of the VarV vaccination strategy in Shenzhen from self pay 1 dose to free 2 dose has significantly reduced the varicella incidence among nursery children, demonstrating good short term control and long term intervention effectiveness.

Objective: To understand the correlation between autistic traits in children with autism spectrum disorder(ASD) and their parental behaviors, so as to provide evidence for improving social behavior in children with ASD. Methods: A total of 62 children aged 4-7 years diagnosed with ASD at Guangdong Provincial Work Injury Rehabilitation Hospital and Guangzhou Yuexiu District Children s Hospital from October 2021 to May 2025 were selected as the ASD group. A random number table method was used to select 62 healthy children of the same age from 3 ordinary kindergartens in Guangzhou as the control (typically developing,TD) group. The Parental Behavior Inventory and Social Responsiveness Scale were used to evaluate parental behaviors and autistic traits in both groups. The t-test and multiple linear regression were used to analyze the relationship between autistic traits in children with ASD and parental behaviors. Results: Compared with the TD group, the ASD group had significantly higher scores in social awareness, social cognition, social communication, social motivation, autistic behavior patterns, and the total score of social responsiveness, with statistically significant differences ( t =35.83, 46.17, 64.36, 41.45, 49.46,101.15, all P <0.01). The score of parental support/participation in the ASD group (24.61±4.30) was lower than that in the TD group (31.27±4.58), while the score of parental hostility/coercion in the ASD group (25.51±2.72) was higher than that in the TD group (12.75±2.72), with statistically significant differences ( t = -8.34, 26.14, both P <0.01). The total score of the Social Responsiveness Scale was negatively correlated with the dimension score of parental support/participation behaviors, and positively correlated with the dimension score of parental hostility/coercion behaviors ( r =-0.60, 0.91,both P <0.05). After adjusting for covariates such as children s age, gender, and primary caregiver, ASD children with exclusive breastfeeding ( β =-8.79) and parental support/participation behaviors ( β = -0.79 ) had a lower risk of autistic traits, while children with parental hostility/coercion behaviors ( β =4.62) had a higher risk of autistic traits (all P <0.05). Conclusion Autistic traits in children with ASD may be related to their parental behaviors and early feeding mode.

This study explores methodological issues in the design， evaluation， and reporting of randomized controlled trials （RCTs） under the concept of "syndrome dominating disease". The discussion focuses on key aspects including the adaptability of trial design， the screening of research participants， the standardization of syndrome differentiation， the balance between intervention individualization and standardization， the integration of multi-dimensional outcome measures， and the limitations of existing evaluation and reporting tools when applied to this type of research， along with corresponding recommendations and future perspectives. Regarding research design， it is recommended to select or draw upon innovative design concepts such as basket trials and subgroup-based dynamic/static parallel-group designs， in order to innovate the design format of RCTs. Meanwhile， criteria for participant screening， TCM syndrome differentiation， and disease classification should be standardized. The balance should be appropriately achieved between intervention individualization and standardization， and a multidimensional assessment system encompassing TCM syndromes， disease-specific outcomes， and patient-reported outcomes should be established. For risk of bias assessment and research reporting， it is recommended，to develop specialized assessment and reporting tools based on existing instruments， in order to standardize the assessment and reporting of study findings. Future research may further explore the potential applications of artificial intelligence in the study design， risk-of-bias assessment， and reporting quality assessment of RCTs based on the "syndrome dominating disease" model， with a particular focus on methodological optimization， data integration， and enhancement of research quality.

This study explores methodological issues in the design， evaluation， and reporting of randomized controlled trials （RCTs） under the concept of "syndrome dominating disease". The discussion focuses on key aspects including the adaptability of trial design， the screening of research participants， the standardization of syndrome differentiation， the balance between intervention individualization and standardization， the integration of multi-dimensional outcome measures， and the limitations of existing evaluation and reporting tools when applied to this type of research， along with corresponding recommendations and future perspectives. Regarding research design， it is recommended to select or draw upon innovative design concepts such as basket trials and subgroup-based dynamic/static parallel-group designs， in order to innovate the design format of RCTs. Meanwhile， criteria for participant screening， TCM syndrome differentiation， and disease classification should be standardized. The balance should be appropriately achieved between intervention individualization and standardization， and a multidimensional assessment system encompassing TCM syndromes， disease-specific outcomes， and patient-reported outcomes should be established. For risk of bias assessment and research reporting， it is recommended，to develop specialized assessment and reporting tools based on existing instruments， in order to standardize the assessment and reporting of study findings. Future research may further explore the potential applications of artificial intelligence in the study design， risk-of-bias assessment， and reporting quality assessment of RCTs based on the "syndrome dominating disease" model， with a particular focus on methodological optimization， data integration， and enhancement of research quality.