Background As common public facilities essential to daily life, hair and beauty salons frequently contain various airborne toxic and hazardous pollutants potentially leading to adverse health effects for salon practitioners. Objective To characterize the indoor air pollution profiles of common contaminants in hair and beauty salons in Shanghai and to evaluate the associated health risks for practitioners, in order to provide a scientific basis for strengthening the public health management in Shanghai and protecting the health of practitioners. Methods The air quality monitoring data of hair and beauty salons in Shanghai from 2016 to 2024 were obtained from the “Health Hazard Factors Monitoring Program for Public Places” of the National Institute of Environmental Health, Chinese Center for Disease Control and Prevention. Monitoring indicators included particulate matter ≤10 μm in aerodynamic diameter (PM₁₀), particulate matter ≤2.5 μm in aerodynamic diameter (PM_2.5), formaldehyde, ammonia, benzene, toluene, and xylene. Indicator compliance rates were calculated across various years in accordance with GB 9666-1996 Hygienic standard for barber shop and beauty shop and GB 37488-2019 Hygiene indicators and limit for public places; specifically, PM_2.5 was assessed against the limits stipulated in GB/T 18883-2022 Standards for indoor air quality. A questionnaire survey was conducted among salon practitioners to collect weekly working days and daily working hours. The non-carcinogenic risks associated with inhalation exposure to formaldehyde, ammonia, benzene, toluene, and xylene as well as the carcinogenic risks posed by formaldehyde and benzene were evaluated following WS/T 777-2021 Technical guide for environmental health risk assessment of chemical exposure and the U.S. Environmental Protection Agency inhalation risk model. Results The overall compliance rates of PM₁₀, formaldehyde, ammonia, benzene, and toluene in the air of hair and beauty salons in Shanghai from 2016 to 2024 were 92.13%, 96.59%, 96.15%, 94.93%, and 94.97%, respectively; the overall compliance rate of xylene was a little lower (85.92%), and the overall compliance rate of PM_2.5 was 57.18%. The P₅₀ concentrations of PM₁₀, PM_2.5, formaldehyde, ammonia, benzene, toluene, and xylene did not exceed the corresponding limits. The P₅₀ of non-carcinogenic risk indicator (hazard quotient, HQ) for formaldehyde, ammonia, benzene, toluene, and xylene were <1. The probabilities of non-carcinogenic risk HQ >1 for formaldehyde and xylene were 41.4% and 10.9%, respectively, which were higher than that of other pollutants. The P₅₀ of carcinogenic risk (CR) for formaldehyde and benzene were between 1.0×10⁻⁶ and 1.0×10⁻⁴, while the probabilities of CR >1.0×10⁻⁴ were 16.9% and 14.0%, respectively. Conclusion The overall compliance rate of common pollutant concentrations in the air of hair and beauty salons in Shanghai is high, and the hygienic condition meets the requirements of national standards. The non-carcinogenic health risks posed by formaldehyde and xylene to employees (with formaldehyde being more prominent), as well as the carcinogenic risks associated with formaldehyde and benzene, deserve heightened attention in future health supervision.

Evaluating the absorption of traditional Chinese medicine (TCM) formulations in skin has long been a challenge in cutaneous pharmacokinetic studies of TCM. In recent years, various new techniques, including diffusion cell, microphysiological system, matrix-assisted laser desorption/ionization mass spectrometry imaging, tape stripping, microdialysis/open-flow microperfusion, and confocal Raman microscopy technology, have been developed to characterize and predict the pharmacokinetic profiles of these formulations more accurately. This review systematically summarizes the application progress of these methods in the evaluation of cutaneous pharmacokinetics of TCM, highlights their technical features and suitable scenarios, and discusses future development trends, providing new research perspectives for further understanding the dynamic changes, spatial distribution characteristics of active ingredients in the skin, and the rationality of compatibility in topical preparations.

arcopenia is a systemic skeletal muscle disorder characterized by a decrease in skeletal muscle mass and progressive decline in function， with multiple signaling pathways involved in its occurrence and development. Among them， the AMP-activated protein kinase （AMPK） signaling pathway， as a key pathway regulating cellular energy homeostasis， plays an important role in the regulation of skeletal muscle metabolism and functional maintenance by improving abnormalities in glucose and lipid metabolism， balancing skeletal muscle protein synthesis and degradation， improving mitochondrial function， promoting autophagy， and inhibiting inflammatory responses and oxidative stress. This article reviews the research progress on how various traditional Chinese medicine （TCM） monomers， including polyphenols， flavonoids， and terpenoids； various traditional Chinese medicine extracts， such as those from Lycium barbarum ， Asini Corii Colla， and Panax quinquefolium ， and TCM compounds， such as Guiqi zhuangjin decoction， Jianpi qiangji granules， and Qigu capsules， intervene in sarcopenia by regulating the AMPK signaling pathway to promote muscle protein synthesis， inhibit protein degradation， improve mitochondrial function， and alleviate inflammation and oxidative stress. Additionally， their molecular mechanisms are explored. The aim is to deeply elucidate the basis of TCM in the prevention and treatment of sarcopenia and to provide theoretical support for the development of related innovative drugs.

AIM: To investigate the influence of pterygium thickness and area on corneal refractive status.METHODS: Prospective longitudinal study. A total of 60 cases(60 eyes)of pterygium patients admitted to our hospital from January 2024 to September 2024 were randomly selected. All patients underwent pterygium excision combined with pedicle conjunctival flap transplantation for treatment. Optical coherence tomography(OCT)was used to measure the preoperative thickness of patient's pterygium, and a digital slit lamp microscope was used to measure the area of pterygium. The corneal refractive status(degree of corneal astigmatism and average curvature)and changes in uncorrected visual acuity of patients before surgery, 1 d, 1, and 3 mo after surgery were compared. The relationship between preoperative thickness and area of pterygium in patients and corneal refractive status indicators at different postoperative time points were analyzed, and Logistic regression was used to analyze the impact of pterygium thickness and area on postoperative visual improvement in patients.RESULTS: All patients completed follow-up after surgery for 3 mo. At 3 mo after surgery, visual acuity improved in 21 eyes(35%). The results of bivariate Pearson correlation analysis showed that the thickness and area of pterygium positively correlated with the degree of corneal astigmatism and uncorrected visual acuity before surgery and 1 d, 1, and 3 mo after surgery(all P<0.05), and negatively correlated with the average corneal curvature before surgery and 1 d, 1, and 3 mo after surgery(all P<0.05). Logistic regression analysis showed that the thickness and area of pterygium before surgery, high degree of corneal astigmatism, and low uncorrected visual acuity(large LogMAR value)were all risk factors for poor postoperative visual improvement in patients(OR>1, P<0.05). The large average corneal curvature before surgery was a protective factor for poor postoperative visual improvement in patients(OR<1, P<0.05).CONCLUSION: The increase in thickness and area of pterygium can, to some extent, improve corneal astigmatism, reduce the average curvature of the cornea, and affect postoperative visual recovery.

ObjectiveTo evaluate the efficacy and safety of Janus kinase （JAK） inhibitors combined with Chinese herbal medicine （CHM） in treating rheumatoid arthritis （RA）. MethodsClinical data from 169 RA patients were retrospectively collected. Among them， 71 cases received JAK inhibitors as the control group， while 98 cases received JAK inhibitors plus CHM as the observation group， both treated for 24 weeks. The rheumatoid factor （RF）， cyclic citic peptide antibody （anti-CCP）， erythrocyte sedimentation rate （ESR）， C-reactive protein （CRP）， and white blood cell count （WBC） were recorded before and after treatment. Databases including CNKI， Wanfang， VIP， PubMed and Web of Science were searched from inception till August 31st， 2025 for randomized controlled trials （RCTs） on the combined use of JAK inhibitors and CHM for RA. The methodological quality of the included studies was evaluated using the risk of bias assessment tool. Meta-analyses were performed for RF， anti-CCP， ESR， CRP， 28-joint disease activity score （DAS28）， overall clinical effective rate， and incidence of adverse events. Sensitivity analysis were also performed. ResultsThe retrospective study demonstrated that after treatment， ESR， CRP， and anti-CCP levels decreased in the observation group， while ESR and CRP levels decreased in the control group （P＜0.05）. Moreover， ESR and RF levels in the observation group were lower than those in the control group （P＜0.05）. A total of 9 RCTs involving 770 patients were included in the meta-analysis. The results indicated that the JAK inhibitors plus CHM group was superior to the JAK inhibitors group in reducing RF （MD=-8.97， 95%CI -15.01 to -2.94， P=0.004）， CRP （MD=-3.34， 95%CI -3.82 to -2.86， P＜0.001）， ESR （MD=-5.33， 95%CI -7.98 to -2.69， P＜0.001）， and DAS28 score （MD=-0.54， 95%CI -0.74 to -0.34， P＜0.001）， as well as in improving the overall clinical effective rate （OR=4.53， 95%CI 2.55 to 8.03， P＜0.001）. No statistically significant differences were observed between groups in anti-CCP levels （SMD=-2.08， 95%CI -4.41 to 0.24， P=0.080） or incidence of adverse events （OR=0.93， 95%CI 0.55 to 1.57， P=0.790）. ConclusionThe combination of JAK inhibitors and CHM demonstrates remarkable efficacy in treating RA， contributing to improved disease activity and reduced inflammatory markers with a favorable safety profile.

BACKGROUND:Streptococcus mutans is an important pathogen of dental caries,and timely detection of its levels is of great significance for early detection and treatment of dental caries. OBJECTIVE:To evaluate the effect of loop-mediated isothermal amplification(FTA-LAMP)direct extraction of Streptococcus mutans DNA. METHODS:(1)Bacterial suspensions containing ATCC standard strains(Streptococcus mutans)were prepared and inoculated into the brain-heart leachate medium.After mixed thoroughly,the mixture was then diluted in a 10-fold gradient into seven concentrations(4.2×107,4.2×106,4.2×105,4.2×104,4.2×103,4.2×102,4.2×10 CFU/mL),two parallel controls were made for each dilution level,and sterile water was used as a blank control.(2)The DNA of Streptococcus mutans was extracted using FTA Elute card,boiling method,kit extraction and lysate extraction methods separately and then amplified using LAMP technology was amplified.A specificity test was also performed to compare the differences between the four DNA extraction methods.RESULTS AND CONCLUSION:The DNA extracted by all four methods met the requirements for LAMP amplification.Specificity test results showed that only Streptococcus mutans could specifically amplify the target gene.The detection limit value of the DNA concentration was 4.2×103 CFU/mL for the lysate method,4.2×104 CFU/mL for the FTA Elute card extraction method,4.2×106 CFU/mL for the kit extraction method,and 4.2×107 CFU/mL for the boiling method.In the other aspects of the four extraction methods,the kit extraction method had the highest experimental cost,number of steps and time;the other three methods had the same number of steps,with the FTA Elute card method requiring the least amount of instruments,the boiling method having the lowest single cost,and the lysate extraction method taking the least amount of time.Only a small amount of bacteria were needed for successful extraction using both the FTA Elute card and lysate extraction methods.Compared with the FTA Elute card method,the lysate extraction method was superior in terms of time,but it had a high single cost and required more equipment.To conclude,the FTA-LAMP technology established in this study has the advantages of ease of operation,high specificity,high sensitivity,and visualization,which is expected to be a new way for efficient extraction and detection of Streptococcus mutans.

Chirality is not only a natural phenomenon but also a bridge between chemistry and life sciences.An effective way to obtain a single enantiomer is through racemates resolution.Recent literature shows that chiral metal-organic frameworks(CMOFs)have many applications in various fields because of their diverse topologies and functionalities.This review outlines the design idea and summarizes the latest synthesis strategies and applications of CMOFs.It highlights key advances and issues in the separation domain.In conclusion,the review provides perspectives on the challenges and prospective advance-ments of CMOFs materials and CMOFs-based separation technologies.

G protein-coupled receptors(GPCRs)are the largest family of membrane proteins in eukaryotes,with nearly 800 genes coding for these proteins.They are involved in many physiological processes,such as light perception,taste and smell,neurotransmitter,metabolism,endocrine and exocrine,cell growth and migration.Importantly,GPCRs and their ligands are the targets of approximately one third of all mar-keted drugs.GPCRs are traditionally known for their role in transmitting signals from the extracellular environment to the cell's interior via the plasma membrane.However,emerging evidence suggests that GPCRs are also localized on mitochondria,where they play critical roles in modulating mitochondrial functions.These mitochondrial GPCRs(mGPCRs)can influence processes such as mitochondrial respi-ration,apoptosis,and reactive oxygen species(ROS)production.By interacting with mitochondrial signaling pathways,mGPCRs contribute to the regulation of energy metabolism and cell survival.Their presence on mitochondria adds a new layer of complexity to the understanding of cellular signaling,highlighting the organelle's role as not just an energy powerhouse but also a crucial hub for signal transduction.This expanding understanding of mGPCR function on mitochondria opens new avenues for research,particularly in the context of diseases where mitochondrial dysfunction plays a key role.Ab-normalities in the phase conductance pathway of GPCRs located on mitochondria are closely associated with the development of systemic diseases such as cardiovascular disease,diabetes,obesity and Alz-heimer's disease.In this review,we examined the various types of GPCRs identified on mitochondrial membranes and analyzed the complex relationships between mGPCRs and the pathogenesis of various diseases.We aim to provide a clearer understanding of the emerging significance of mGPCRs in health and disease,and to underscore their potential as therapeutic targets in the treatment of these conditions.

Objective:To investigate the long-term outcomes of using 3D-printed preformed titanium meshes in repair and reconstruction of orbital region.Methods:A retrospective analysis was conducted on patients with tumors invading the naso-orbito-maxillary region who underwent surgical resection and repair/reconstruction with 3D-printed preformed titanium meshes. The patients were collected at three medical centers (the Third Affiliated Hospital of Sun Yat-sen University, Xijing Hospital of Air Force Military Medical University, and Shenzhen Longgang District Ear, Nose and Throat Hospital) from 2016 to 2023. Tumor extent was evaluated radiologically, and the surgical approaches, reconstruction outcomes, surgical complications, and long-term follow-up results were analyzed.Results:A total of 46 patients from the three centers were included in this study, comprising 27 males and 19 females, with an average age of 51 years (range: from 13 to 86 years). Among them, 4 patients had benign tumors, while the remaining 42 had malignant tumors. The median follow-up duration was 60.7 months (range: from 19.0 to 75.0 months). Postoperatively, symmetrical globe position was achieved in 38 cases without significant diplopia; 4 cases exhibited enophthalmos without diplopia, and 4 cases had enophthalmos with diplopia. Twelve patients received preoperative radiotherapy, and 30 patients received postoperative radiotherapy. Six patients developed enophthalmos, and 6 experienced titanium mesh exposure after radiotherapy. Following treatment completion, 3 patients underwent repair using frontal flaps, 1 using a superficial temporal artery island flap, and 2 using free flaps. All remaining patients showed no postoperative infections, and their wounds healed normally.Conclusion:The application of 3D-printed preformed titanium mesh enables precise repair of postoperative defects in patients with naso-orbital tumors, facilitating reliable reconstruction of the orbital and facial contours with straightforward operation and dependable outcomes.

Objective:To evaluate the clinical outcomes of mandibular angle osteotomy combined with wing-shaped genioplasty for the correction of low-angle mandibular prominence with microgenia.Methods:A retrospective analysis was conducted on patients who underwent mandibular angle osteotomy and wing-shaped genioplasty at the Second Hospital of Nanjing between January 2020 and December 2022. Preoperative three-dimensional computed tomography and lateral cephalograms were obtained, and relevant parameters were measured, including the Frankfort horizontal plane to mandibular plane angle (∠FH-MP), the lower lip to soft tissue pogonion angle (∠LiaV-Pog) and the facial height index (FHI). Based on the measurements, surgical experience, and patient preference, the osteotomy lines for the mandibular angle and the wing-shaped genioplasty were designed. During the procedure, mandibular angle osteotomy and wing-shaped genioplasty were performed in accordance with the preoperative surgical plan. The distal genial segment was advanced and inferiorly repositioned according to the predetermined measurements and rigidly fixed to the bilateral mental tubercles using titanium plates and screws. The bone segments resected from the mandibular angle were then longitudinally split into either single- or double-layer bone grafts. These grafts were meticulously implanted into the interpositional gap at the genial region to optimize chin projection and refine the lower facial contour. Postoperative monitoring included assessments of wound healing, complications and lower facial contour. At the final follow-up, lateral cephalograms were taken for remeasurement, and patient satisfaction was surveyed. Statistical analysis was performed using SPSS 22.0 software. Pre- and postoperative data for ∠FH-MP, ∠LiaV-Pog, and FHI were presented as Mean ± SD and compared using paired t-tests, with a P-value < 0.05 considered statistically significant. Results:Twelve female patients, aged 22-35 years (mean 28.3), were included. The follow-up period ranged from 6 to 24 months. All surgical sites achieved primary healing without early complications such as hemorrhage, hematoma, or wound infection. However, all patients experienced transient mental numbness, which resolved within 3 to 6 months. All patients achieved a smooth and natural mandibular contour. CT scans confirmed satisfactory survival of the grafted bone. All patients expressed satisfaction with the aesthetic outcomes. Postoperative measurements of ∠FH-MP, ∠LiaV-Pog, and FHI were (25.2±4.6)°, (24.0±1.2)°, and (52.0±1.3)%, respectively, which were significantly improved compared to the preoperative values of (16.8±5.9)°, (36.5±4.8)°, and (66.0±4.3)% (all P < 0.01). Conclusion:The combination of mandibular angle osteotomy and wing-shaped genioplasty is an effective and safe procedure for correcting low-angle mandibular prominence with microgenia. This technique significantly increases the mandibular plane angle, creates a natural and smooth mandibular contour, and yields stable result with high patient satisfaction.