ObjectiveHistorically documented Zhejiang Atractylodis Macrocephalae Rhizoma（Baizhu） possesses premium characteristics such as phoenix-like head and crane-like neck， pronounced sweetness， and fragrant aroma. However， its current market circulation is low， and the processed products with Zhejiang-style characteristics are at the risk of being lost. This study aims to preserve the ancient Zhejiang-style processing techniques and evaluate them using modern scientific methods. MethodsMultidimensional intelligent sensory evaluation was used to digitally characterize the "quality-structure" of the external appearance of nine-steamed and nine-processed Baizhu medicinal materials（intermediate processed products） and the "odor-taste" of the internal quality of its decoction pieces（slices）， and the appearance parameters were digitally characterized by colorimeter， texture analyzer， electronic nose and electronic tongue， the chemical composition was analyzed via ultra-performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS/MS）. Then， cluster analysis on the differences in odor between the medicinal materials（intermediate processed products） and decoction pieces（slices） of nine-steamed and nine-processed Baizhu was conducted， as well as the differences in taste between water-soluble and alcohol-soluble extracts of the decoction pieces（slices）， and the correlation analysis of chroma value-alcohol-soluble extract content-component response value. ResultsThe nine-steamed and nine-processed Baizhu had a dark brown to black epidermis， a brownish-yellow to brownish-gray cross-section， a slightly tough texture， a faint odor， and a slightly sweet， bitter and pungent taste. Texture analyzer measurements revealed minimal adhesion and maximum recovery in the middle section of the characteristic processed Baizhu， consistent with the processing endpoint of thorough steaming and cooking. The head section showed the highest internal hardness， elasticity and chewiness， indicating a denser texture in this area. The electronic nose sensor could clearly distinguish the difference between the medicinal materials and its decoction pieces， with a more significant clustering effect at 60 ℃ for 30 minutes compared to ambient temperature headspace for 2 hours， highlighting the significant impact of the baking degree before slicing on the quality. The electronic tongue taste signal map clearly distinguished the differences between water-soluble and alcohol-soluble extracts of nine-steamed and nine-processed Baizhu decoction pieces， and the addition of auxiliary materials during processing could enhance its alcohol-soluble extract content. A total of 82 chemical components were identified in the characteristic processed Baizhu. After processing， the contents of 58 components increased， while 24 components decreased. Correlation analysis revealed significant negative correlations（P<0.01） between ethanol-soluble extract content and colorimetric values of brightness（L^*）， yellow-bule value（b^*）， and total color difference（E^*_ab）. E^*_ab showed marked negative correlations（P<0.05） with the response values of isochlorogenic acid A and C. ConclusionThis study establishes a modern intelligent sensory evaluation model for multidimensional holographic characterization of nine-steamed and nine-processed Baizhu， clarifying the correlation between increased isochlorogenic acid content and the visual color appearance after different steaming cycles， as well as its intrinsic alcohol-soluble extracts. This provides a reference for quality evaluation and processing standards of the Zhejiang-style characteristic processed products.

Neurocritical care involves complex pathophysiological mechanisms, and its incidence is higher, injuries are more severe, and treatment is more challenging in high-altitude environments. This consensus, based on the latest domestic and international evidence-based medical data, establishes a standardized, goal-oriented framework for neurocritical care management applicable in high-altitude regions and nationwide. The consensus was developed following international standards for evidence quality assessment and underwent two rounds of Delphi expert consultation, resulting in 32 recommendation statements covering three parts: management systems, monitoring and assessment, and core strategies. Key updates include: advocating for the establishment of independent neurocritical care units and implementing precise tiered diagnosis and treatment based on the "Five Differences in Critical Care" concept; constructing a "trinity" multimodal brain monitoring system centered on cerebral blood flow, cerebral oxygenation, and brain function, emphasizing routine bedside transcranial Doppler ultrasound, cerebral oximetry, and continuous electroencephalography monitoring; shifting management strategies from mild hypothermia therapy to targeted temperature management, and defining the "446" target management pathway for the supercritical stage; emphasizing the assessment of static and dynamic cerebrovascular autoregulation functions through multimodal methods to achieve individualized optimal mean arterial pressure management; elevating cerebrospinal fluid management goals to the level of "glymphatic system" function maintenance; implementing a multidisciplinary collaborative, whole-process management model focusing on patients' long-term neurological functional outcomes; de-escalation criteria include multidimensional indicators such as recovery of brain structure, restoration of cerebrovascular autoregulation, improvement in cerebrospinal fluid dynamics, and reduction in biomarker levels; and integrating cutting-edge technologies like artificial intelligence into post-critical care management and rehabilitation planning. This consensus systematically integrates the entire process of neurocritical care management, reflecting the modern connotation of goal-oriented, dynamic, and multimodal integration in neurocritical care medicine. It aims to adapt to new trends such as deepening understanding of pathophysiological mechanisms, the integration of medicine and engineering, and the empowerment of artificial intelligence, thereby further advancing the discipline of critical care medicine.

To thoroughly implement the strategic deployment outlined in the Opinions of the Central Committee of the Communist Party of China and the State Council on Promoting the Inheritance and Innovative Development of Traditional Chinese Medicine regarding research on dominant diseases of traditional Chinese medicine and to uphold the development philosophy of equal emphasis on traditional Chinese medicine and western medicine，the China Association of Chinese Medicine has fully played a leading academic role by systematically organizing and conducting a series of academic youth salons on clinical dominant diseases of traditional Chinese medicine. On September 13，2024，the 36^th Youth Salon on Clinical Dominant Diseases was successfully held in Nanjing，focusing on the advantages of traditional Chinese medicine and the integrative traditional Chinese medicine and western medicine in the diagnosis and treatment of erectile dysfunction （ED）. The conference brought together leading experts from traditional Chinese medicine，western medicine，and interdisciplinary fields，facilitating in-depth multidisciplinary discussions that led to key consensus on optimizing traditional Chinese medicine treatment protocols for ED，researching and developing new drugs of traditional Chinese medicine，and advancing interdisciplinary development in traditional Chinese medicine. This salon systematically sorted out the clinical strengths and distinctive features of traditional Chinese medicine in the diagnosis and treatment of ED. Based on current research foundations and clinical needs，it identified key directions for future scientific layout and scientific research tackling： （1） Standardization of syndrome differentiation system of traditional Chinese medicine for ED. （2） Optimization and standardization of intervention methods of integrated traditional Chinese medicine and western medicine. （3） High-quality clinical research guided by evidence-based medicine. （4） In-depth analysis of the pharmacological mechanisms of traditional Chinese medicine in the treatment of ED. （5） Clinical translation and application promotion of new drugs of traditional Chinese medicine. （6） Interdisciplinary integration and innovation in traditional Chinese medicine. For each research direction，key focus areas，expected objectives，and clinical value were further refined，along with the establishment of a scientifically sound priority funding level evaluation system. Therefore，building on the series of salons on the ED-focused dominant diseases of traditional Chinese medicine，this paper provides standardized guidance for clinical practice of traditional Chinese medicine in ED management，effectively contributing to the high-quality development of traditional Chinese medicine. It serves as a valuable reference for national scientific and technological strategic layout， research and development decision-making in new drugs of traditional Chinese medicine，research topic planning，and clinical guideline formulation.

BACKGROUND:Black phosphorus has a high degree of homology with human bone,so it has been extensively studied in the field of bone tissue engineering in recent years.Since 2014,two-dimensional black phosphorus materials have garned significant attention in the field of biomedicine due to their excellent exceptional physical,chemical,and biological properties. OBJECTIVE:To summarize the advancements made in black phosphorus-based nanomaterials for bone tissue engineering,focus on the synthesis methods,osteogenic characteristics,and applications in biomaterials pertaining to two-dimensional black phosphorus nanomaterials. METHODS:Chinese and English key words were"black phosphorus,bone tissue engineering,bone defect,bone regeneration,osteogenesis."Relevant articles in PubMed and CNKI databases from January 2014 to December 2023 were searched.After exclusion and screening,96 articles were analyzed. RESULTS AND CONCLUSION:Black phosphorus nanomaterials play an important role in bone tissue engineering due to their good biocompatibility,biodegradability,photothermal action,antibacterial ability,drug loading performance,and special osteogenic effect,and are ideal candidate materials for promoting bone regeneration.The preparation of black phosphorus nanomaterials is mainly a top-down top-layer stripping method.The main principle is to weaken the van der Waals force between the black phosphorus layers by physical or chemical means to obtain a single or less layer of phosphanse,that is,black phosphorus nanosheets or quantum dots.Black phosphate-based nanocomposites are mainly divided into hydrogels,3D printing scaffolds,composite scaffolds,electrospinning,bionic periosteum,microspheres,and bionic coatings.The research of nano-black phosphorus in bone tissue engineering is in its infancy,and still faces many challenges:the behavior of black phosphorus in vivo and the interaction mechanism with various biomolecules need to be further studied.The long-term potential toxicity of black phosphorus is unknown.The manufacturing process for black phosphorus is difficult to control.Therefore,how to develop uniform size,safe,reliable,and efficient nano black phosphorus and transform it into clinical application requires interdisciplinary research on modern biomedical technology,physicochemical technology,and precision manufacturing technology.

BACKGROUND:Erythropoietin has anti-inflammatory,anti-apoptotic,and pro-bone defect repair effects.To date,fewer studies have been conducted on its effects and molecular mechanism underlying restorative dentin formation after pulp injury. OBJECTIVE:To explore the effect of erythropoietin on restorative dentin formation after pulp injury. METHODS:(1)Animal experiment:Thirty-two rats were randomly divided into control group(n=16)and experimental group(n=16).In the experimental group,collagen sponges containing erythropoietin were used to directly cap the pulp at the pulp injury,and in the control group,collagen sponges containing PBS were used to directly cap the pulp at the exposed pulp injury.The cavity was then closed with glass ionomer adhesive.After 2 and 4 weeks of treatment,the maxillary bones of the two groups were collected,and the expression of nestin in dentin was detected by immunohistochemistry,and the reparative dentin production was observed by hematoxylin-eosin staining.The maxillae of four Sprague-Dawley rats were taken for immunohistochemical detection of erythropoietin expression in molar and incisor teeth.(2)Cell experiment:Human dental pulp cells,human periodontal ligament cells and human gingival fibroblasts were obtained from human dental tissue,periodontal ligament,and gingival tissue.Real-time reverse transcription PCR(RT-PCR)was used to detect the mRNA expression of erythropoietin.Erythropoietin,dentin sialophosphoprotein,dentin matrix protein 1,and nestin mRNA levels in human pulp cells were detected by RT-PCR under induced or uninduced odontoblastic differentiation.After down-regulation of erythropoietin expression or exogenous administration of erythropoietin intervention under induced or uninduced differentiation odontoblastic differentiation,the relative mRNA expression of dentin sialophosphoprotein and dentin matrix protein 1 in human pulp cells was detected by RT-PCR,and the formation of mineralized nodules was detected by alizarin red S staining,and mRNA and protein expressions of bone morphogenetic protein 2 were detected by RT-PCR and western blot,respectively. RESULTS AND CONCLUSION:(1)Animal experiment:Compared with the control group,the restorative dentin production and nestin expression were higher in the experimental group after 2 and 4 weeks of treatment.The expression of erythropoietin was weakly positive in pulp,odontoblastic cell layer and periodontal membrane of the rat's first maxillary molar,and strongly positive in odontoblasts.(2)Cell experiment:The mRNA expression of erythropoietin was higher in human dental pulp cells than in the other two types of cells.The mRNA expressions of dentin sialophosphorin,dentin matrix protein 1,nestin,erythropoietin and bone morphogenetic protein 2 in human pulp cells increased and the formation of mineralized nodules during odontoblastic differentiation under induction compared with non-induction conditions.The mRNA expression of dentin sialophosphoprotein,dentin matrix protein 1,nestin,bone morphogenetic protein 2 and the formation of mineralized nodules were decreased in human pulp cells after downregulation of erythropoietin under induced odontoblastic differentiation,and the protein expression of bone morphogenetic protein 2 was also decreased.After exogenous erythropoietin intervention,the expression of the above indexes in human dental pulp cells increased.To conclude,erythropoietin can promote the formation of dentin to some extent.

BACKGROUND:As a common disease in middle-aged and elderly,osteoarthritis is difficult to cure,and the pathogenesis is not clear.Long non-coding RNA participates in the pathogenesis of osteoarthritis through many ways,such as regulating translation,promoting or inhibiting mRNA,and adsorbing miRNAs. OBJECTIVE:To review the types of common long non-coding RNA in osteoarthritis,and the influence of multiple long non-coding RNAs on the pathological factors related to osteoarthritis,to analyze the future application of long non-coding RNAs in osteoarthritis. METHODS:Literature retrieval was conducted in CNKI,WanFang Data,VIP database,PubMed,Web of Science and Sciencedirect databases,using the search terms of"osteoarthritis,degenerative joint disease,degenerative arthritis,OA,LncRNA,long non-coding RNA,long noncoding RNA,long intergenic non-coding RNA"in Chinese and English.All relevant literature published from 1976 and May 2024 was retrieved.After literature screening,induction,analysis and summary,93 articles were finally included for review. RESULTS AND CONCLUSION:This review collected 25 long non-coding RNAs that are well studied with osteoarthritis.Long non-coding RNAs,as a molecular sponge for miRNA,are competing endogenous RNAs to competitively adsorb miRNAs and then affect downstream targets.Long non-coding RNAs can regulate physiopathological processes such as chondrocyte apoptosis and proliferation,cartilage extracellular matrix degradation,and inflammatory responses.Long non-coding RNAs are expected to become a biomarker and potential therapeutic target for the clinical diagnosis and therapeutic prognosis of osteoarthritis,and it may become a new strategy for the clinical treatment of osteoarthritis in the future.

OBJECTIVE To explore the effects of leonurine on growth arrest-specific protein-6 （GAS6）/Axl signaling pathway， and clarify its mechanism of alleviating myocardial injury in rats with coronary heart disease. METHODS The rat model of coronary heart disease was constructed； successfully modeled rats were randomly separated into model group， leonurine low- dose and high-dose groups （intragastric administration of leonurine 25， 100 mg/kg+intraperitoneal injection of normal saline 75 mg/kg）， and leonurine high-dose+GAS6/Axl signaling pathway inhibitor group （intragastric administration of leonurine 100 mg/kg+ intraperitoneal injection of R428 75 mg/kg）， with 12 rats in each group. Additional 12 normal rats were selected as control group. Each administration group was given relevant medicine； control group and model group were given a constant volume of normal saline intragastrically and intraperitoneally， once a day， for 48 consecutive days. After administration， the heart function of rats， and serum levels of inflammatory factors and myocardial injury markers were detected； the pathological morphology of myocardial tissue was observed； the myocardial cell apoptosis rate， the expressions of apoptosis and GAS6/Axl signaling pathway-related proteins were determined. RESULTS Compared with control group， model group showed disorders in the arrangement of myocardial cells and myocardial fibers， hypertrophy of myocardial cells， and nuclear condensation； left ventricular ejection fraction， left ventricular fractional shortening， ratio of early-diastolic and late-diastolic motion velocity of the mitral ring， the protein expression of GAS6， B-cell lymphoma 2/B-cell lymphoma 2 associated X protein and phosphorylated Axl/Axl ratios were decreased significantly （P＜0.05）. The levels of tumor necrosis factor-α， interleukin-1β， interleukin-6， creatine kinase isoenzyme， troponin Ⅰ and myoglobin， the cell apoptosis rate， and cleaved caspase-3/caspase-3 ratio were increased significantly （P＜0.05）. Leonurine could obviously improve the above pathological conditions and detection indicators （P＜0.05）， and the effect of leonurine high-dose group was more significant than that of leonurine low-dose group （P＜0.05）； R428 treatment could reverse the ameliorating effect of high-dose of leonurine on myocardial injury in rats with coronary heart disease （P＜0.05）. CONCLUSIONS Leonurine can alleviate myocardial injury in rats with coronary heart disease， and its mechanism of action is related to the activation of the GAS6/Axl signaling pathway.

To identify and validate the clinical phenotypes of patients with sepsis in the intensive care unit(ICU).

Objective To analyze the structural and phylogenetic characteristics of the mitochondrial genome from Bulinus globosus, so as to provide a theoretical basis for classification and identification of species within the Bulinus genus, and to provide insights into understanding of Bulinus-schistosomes interactions and the mechanisms of parasite transmission. Methods B. globosus samples were collected from the Ruya River basin in Zimbabwe. Mitochondrial DNA was extracted from B. globosus samples and the corresponding libraries were constructed for high-throughput sequencing on the Illumina NovaSeq 6000 platform. After raw sequencing data were subjected to quality control using the fastp software, genome assembly was performed using the A5-miseq and SPAdes tools, and genome annotation was conducted using the MITOS online server. Circular maps and sequence plots of the mitochondrial genome were generated using the CGView and OGDRAW software, and the protein conservation motifs and structures were analyzed using the TBtools software. Base composition and codon usage bias were analyzed and visualized using the software MEGA X and the ggplot2 package in the R software. In addition, a phylogenetic tree was created in the software MEGA X after sequence alignment with the software MAFFT 7, and visualized using the software iTOL. Results The mitochondrial genome of B. globosus was a 13 730 bp double-stranded circular molecule, containing 2 ribosomal RNA (rRNA) genes, 22 transfer RNA (tRNA) genes, and 13 protein-coding genes, with a marked AT preference. The mitochondrial genome composition of B. globosus was similar to that of other species within the Bulinus genus. Phylogenetic analysis revealed that the complete mitochondrial genome sequence of B. globosus was clustered with B. truncatus, B. nasutus, and B. ugandae into the same evolutionary clade, and gene superfamily analysis showed that the metabolism-related proteins of B. globosus were highly conserved, notably the cytochrome c oxidase family, which showed a significant consistency. Conclusions This is the first whole mitochondrial genome sequencing to decode the compositional features of the mitochondrial genome of B. globosus from Zimbabwe and its evolutionary relationship within the Bulinus genus, which provides important insights for further understanding of the phylogeny and mitochondrial genome characteristics of the Bulinus genus.

BACKGROUND: Tissue engineering holds promise for vascular repair and regeneration by mimicking the extracellular matrix of blood vessels. However, achieving a functional and thick vascular wall with aligned fiber architecture by electrospinning remains a significant challenge. METHODS: A novel electrospinning setup was developed that utilizes an auxiliary electrode and a spring. The impact of process parameters on fiber size and morphology was investigated. The structure and functions of the scaffolds were evaluated through material characterization and assessments of cellular biocompatibility. RESULTS: The new setup enabled controlled deposition of fibers in different designed orientations. The fabricated small-diameter vascular scaffolds consisted of an inner layer of longitudinally oriented fibers and an outer layer of circumferentially oriented fibers (L + C vascular scaffold). Key parameters, including rotational speed, the utilization of the auxiliary electrode, and top-to-collector distance (TCD) significantly influenced fiber orientation. Additionally, voltage, TCD, feed rate, needle size, auxiliary electrode and collector-auxiliary electrode distance affected fiber diameter and distribution. Mechanical advantages and improved surface wettability of L + C vascular scaffold were confirmed through tensile testing and water contact angle. Cellular experiments indicated that L + C vascular scaffold facilitated cell adhesion and proliferation, with human umbilical vein endothelial cells and smooth muscle cells attaching and elongating along the fiber direction of the inner and outer layer, respectively. CONCLUSION This study demonstrated the feasibility of fabricating fiber-aligned, thick-walled vascular scaffolds using a modified electrospinning setup. The findings provided insights into how the auxiliary electrode, specific collector influenced fiber deposition, potentially advancing biomimetic vascular scaffold engineering.