ObjectiveTo explore the correlation between the occurrence of cardiovascular events in rheumatoid arthritis（RA） and traditional Chinese medicine（TCM） syndrome. MethodsThe cross-sectional study selected 6713 RA patients from 122 centres nationwide， in which general information such as name， gender， age， height， body weight， and course of disease were collected by completing a questionnaire； patients were classified into eight types of syndrome according to the information of their four examinations，i.e. wind-dampness obstruction syndrome， cold-dampness obstruction syndrome， dampness-heat obstruction syndrome， phlegm-stasis obstruction syndrome， stasis-blood obstructing collateral syndrome， qi-blood deficiency syndrome， liver-kidney insufficiency syndrome， and qi-yin deficiency syndrome. According to the occurrence of cardiovascular events， they were divided into the occurrence group and the non-occurrence group， and the condition assessment data and laboratory examination indexes were recorded. The test of difference between groups was used to analyse the possible risk factors for the occurrence of RA cardiovascular events， and binary logistic regression was used to analyse the correlation between TCM syndromes and RA cardiovascular events. ResultsA total of 6713 RA patients were included， including 256 cases in occurrence group and 6457 in non-occurrence group. There was no statistically significant difference between groups in terms of height， gender， insomnia， appetite， white blood cell（WBC）， hemoglobin（HGB）， platelets（PLT）， rheumatoid factor（RF）， anti-cyclic peptide containing citrulline（CCP）， alanine aminotransferase（ALT）， aspartate aminotransferase（AST）， γ-glutamyl transpeptidase（GGT）， urea creatinine（CREA）， and glucose（GLU）（P＞0.05）. The TCM syndromes between groups showed significant statistic differences（P＜0.05）. Patients in occurrence group had longer disease duration， heavier body weight， and older age； more severe conditions such as disease activity（DAS-28）， number of painful joints（TJC）， number of swollen joints（SJC）， health questionnaire scores（HAQ）， visual analog scores（VAS）， restlessness， and fatigue； higher blood sedimentation rate（ESR）， low-density lipoprotein（LDL-C）， triglyceride（TG）， total cholesterol（TC）， D-Dimer， and lower high-density lipoprotein（HDL-C）（P＜0.05）. The distribution of syndrome types showed that dampness-heat obstruction syndrome accounted for the largest proportion of patients in both groups and was higher in RA cardiovascular events. Logistic regression analysis showed that the occurrence of RA cardiovascular events was strongly associated with dampness-heat obstruction syndrome［OR=5.937， 95%CI （4.434， 7.949）， P＜0.001］. ConclusionThe occurrence of RA cardiovascular events were associated with TCM syndromes， and the probability of cardiovascular events in the RA patients with dampness-heat obstruction syndrome was 5.937 times higher than patients with other TCM syndromes.

The manufacturing process is crucial for ensuring the safety and efficacy of traditional Chinese medicine(TCM) preparations. Using advanced technologies, innovative methods, and new equipment tailored for TCM to enhance the quality control of TCM preparations in the manufacturing process helps to ensure the product quality and foster high-quality development of the TCM industry. Upon current technical requirements, such as Guideline for Studies on Pharmaceutical Changes in Marketed Traditional Chinese Medicine Preparations(Trial) and Guideline for Study on Quality Control in Manufacturing Process of Oral Traditional Chinese Medicine Preparations(Trial), this paper analyzes the characteristics and current development of quality control in the manufacturing process of TCM preparations. It also discusses the significant roles that quality control in manufacturing process plays in ensuring the quality consistency and in the evaluation and decision-making of changes in marketed TCM preparations. Furthermore, to benefit the high-quality development of the TCM industry, this paper offers recommendations for improving quality control of TCM preparations in the manufacturing process and implementing new technologies and methods.
Quality Control ; Drugs, Chinese Herbal/chemistry* ; Medicine, Chinese Traditional/standards* ; Decision Making ; Humans

OBJECTIVE: To investigate the accuracy and safety of pedicle screw placement using 3D-printed auxiliary guides in scoliosis correction surgery for adolescents. METHODS: A retrospective analysis was conducted on the clinical data of 51 patients who underwent posterior scoliosis correction surgery from January 2020 to March 2023. Among them, there were 35 cases of adolescent idiopathic scoliosis and 16 cases of congenital scoliosis. The patients were divided into two groups based on the auxiliary tool used:the 3D-printed auxiliary guide screw placement group (3D printing group) and the free-hand screw placement group (free-hand group, without auxiliary tools). The 3D printing group included 32 patients (12 males and 20 females) with an average age of (12.59±2.60) years;the free-hand group included 19 patients (7 males and 12 females) with an average age of (14.58±3.53) years. The two groups were compared in terms of screw placement accuracy and safety, spinal correction rate, intraoperative blood loss, number of intraoperative fluoroscopies, operation time, hospital stay, and preoperative and last follow-up scores of the Scoliosis Research Society-22 (SRS-22) questionnaire. RESULTS: A total of 707 pedicle screws were placed in the two groups, with 441 screws in the 3D printing group and 266 screws in the free-hand group. All patients in both groups successfully completed the surgery. There was a statistically significant difference in operation time between the two groups (P<0.05). The screw placement accuracy rate of the 3D printing group was 95.46% (421/441), among which the Grade A placement rate was 89.34% (394/441);the screw placement accuracy rate of the free-hand group was 86.47% (230/266), with a Grade A placement rate of 73.31% (195/266). There were statistically significant differences in the accuracy of Grade A, B, and C screw placements between the two groups (P<0.05), while no statistically significant differences were observed in intraoperative blood loss, number of fluoroscopies, correction rate, or hospital stay (P>0.05). In the SRS-22 questionnaire scores, the scores of functional status and activity ability, self-image, mental status, and pain of patients in each group at the last follow-up were significantly improved compared with those before surgery (P<0.05), but there were no statistically significant differences in all scores between the two groups (P>0.05). CONCLUSION In scoliosis correction surgery, compared with traditional free-hand screw placement, the use of 3D-printed auxiliary guides for screw placement significantly improves the accuracy and safety of screw placement and shortens the operation time.
Humans ; Male ; Scoliosis/surgery* ; Female ; Adolescent ; Printing, Three-Dimensional ; Retrospective Studies ; Pedicle Screws ; Child

OBJECTIVE: To assess the efficacy of Qingda Granule (QDG) in ameliorating hypertension-induced cardiac damage and investigate the underlying mechanisms involved. METHODS: Twenty spontaneously hypertensive rats (SHRs) were used to develope a hypertension-induced cardiac damage model. Another 10 Wistar Kyoto (WKY) rats were used as normotension group. Rats were administrated intragastrically QDG [0.9 g/(kg•d)] or an equivalent volume of pure water for 8 weeks. Blood pressure, histopathological changes, cardiac function, levels of oxidative stress and inflammatory response markers were measured. Furthermore, to gain insights into the potential mechanisms underlying the protective effects of QDG against hypertension-induced cardiac injury, a network pharmacology study was conducted. Predicted results were validated by Western blot, radioimmunoassay immunohistochemistry and quantitative polymerase chain reaction, respectively. RESULTS: The administration of QDG resulted in a significant decrease in blood pressure levels in SHRs (P<0.01). Histological examinations, including hematoxylin-eosin staining and Masson trichrome staining revealed that QDG effectively attenuated hypertension-induced cardiac damage. Furthermore, echocardiography demonstrated that QDG improved hypertension-associated cardiac dysfunction. Enzyme-linked immunosorbent assay and colorimetric method indicated that QDG significantly reduced oxidative stress and inflammatory response levels in both myocardial tissue and serum (P<0.01). CONCLUSIONS Both network pharmacology and experimental investigations confirmed that QDG exerted its beneficial effects in decreasing hypertension-induced cardiac damage by regulating the angiotensin converting enzyme (ACE)/angiotensin II (Ang II)/Ang II receptor type 1 axis and ACE/Ang II/Ang II receptor type 2 axis.
Animals ; Drugs, Chinese Herbal/therapeutic use* ; Hypertension/pathology* ; Renin-Angiotensin System/drug effects* ; Rats, Inbred SHR ; Oxidative Stress/drug effects* ; Male ; Rats, Inbred WKY ; Blood Pressure/drug effects* ; Myocardium/pathology* ; Rats ; Inflammation/pathology*

Ischemic stroke (IS) is a globally life-threatening disease. Presently, few therapeutic medicines are available for treating IS, and rt-PA is the only drug approved by the US Food and Drug Administration (FDA) in the US. In fact, many agents showing excellent neuroprotection but no blood flow-improving activity in animals have not achieved ideal clinical efficacy, while thrombolytic drugs only improving blood flow without neuroprotection have limited their wider application. To address these challenges and meet the huge unmet clinical need, we have designed and identified a novel compound AAPB with dual effects of neuroprotection and cerebral blood flow improvement. AAPB significantly reduced cerebral infarction and neural function deficit in tMCAO rats, pMCAO rats, and IS rhesus monkeys, as well as displayed exceptional safety profiles and excellent pharmacokinetic properties in rats and dogs. AAPB has now entered phase I of clinical trials fighting IS in China.

BACKGROUND: A growing body of research is exploring the role of antioxidant and anti-inflammatory dietary supplements in the treatment of osteoarthritis, highlighting an increasing emphasis on non-pharmacological interventions. Although more patients are turning to supplements to manage osteoarthritis, their actual effectiveness remains uncertain. OBJECTIVE: This study aims to provide a comprehensive evaluation of the available evidence concerning the efficacy of various dietary supplements in osteoarthritis treatment. SEARCH STRATEGY: We searched PubMed, Embase, Cochrane Library and Web of Science for studies on the use of various dietary supplements in the treatment of osteoarthritis from the creation of each database until Jan 20, 2025. INCLUSION CRITERIA: (1) Research object: osteoarthritis. (2) Intervention measures: patients in the treatment group received dietary supplements, while the control group received placebos. (3) Research type: randomized controlled trials (RCTs). DATA EXTRACTION AND ANALYSIS: Two researchers independently examined the literature and retrieved data based on predefined criteria. The information gathered included the first author, year of publication, sample size, participant demographics, length of the follow-up period, intervention and control measures, and inclusion indications. RCTs comparing dietary supplements to placebo with the pain and function subscales of the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) among patients with osteoarthritis were included. The optimal dietary supplement was identified based on the total ranking by summing the surface under the cumulative ranking curve (SUCRA) of these two scores. Furthermore, the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) was used to confirm the quality of the evidence. RESULTS: Overall, 23 studies covering 21 dietary supplements and involving 2455 participants met the inclusion criteria. In the WOMAC pain score, the SUCRA of passion fruit peel extract was 91% (mean difference [MD]: -9.2; 95% confidence interval [CI]: [-16.0, -2.3]), followed by methylsulfonylmethane (89%), undenatured type II collagen (87%), collagen (84%), and Lanconone (82%). The SUCRA (99%) of passion fruit peel extract (MD: -41.0; 95% CI: [-66.0, -16.0]) ranked first in terms of the WOMAC function score, followed by Lanconone (95%), collagen (86%), ParActin (84%), and Lactobacillus casei strain Shirota (83%). The top three total rankings are passion fruit peel extract (95.0%), Lanconone (88.5%), and collagen (85.0%). However, the GRADE revealed low evidence quality. CONCLUSION Passion fruit peel extract was the best supplement for improving WOMAC pain and function scores in patients with osteoarthritis, followed by Lanconone and collagen. However, further large-scale, well designed RCTs are required to substantiate these promising findings. Please cite this article as: Chen CS, Wen L, Yang F, Deng YC, Ji JH, Chen RJ, Chen Z, Chen G, Gu JY. Effects of dietary supplements on patients with osteoarthritis: A systematic review and network meta-analysis. J Integr Med. 2025; 23(4): 357-369.
Humans ; Dietary Supplements ; Osteoarthritis/drug therapy* ; Randomized Controlled Trials as Topic

Objective To develop a data-driven model for estimating tangential ground reaction force(GRFt)from lower limb kinematic data and select the most suitable input based on a balance between input quantity and estimation accuracy,with the aim of measuring GRFt in outdoor gait experiments.Methods Gait data from ten subjects walking at five different inclines(-10°,-5°,0°,5°,10°)were used to train two data-driven models,namely a backpropagation neural network(BPNN)-based model and a polynomial sparse identification(PSI)-based model.The performance of these models was evaluated using eight kinematic data combinations and the normal ground reaction force(GRFn)as inputs to determine the optimal model and input combination.Results Under the same input dimensionality,the combination of hip-knee joint angles proved more accurate in estimating GRF,than the knee-ankle joint angle combination.Specifically,the BPNN and PSI models based on the former combination predicted GRF,with errors of 1.61％BW(body weight)and 1.84％BW,respectively,while the latter combination resulted in errors of 2.82％BW and 3.15％BW.When GRFn and all joint angles were used as inputs,the model's prediction error was only 1.46％BW.Conclusions The combination of GRFn and hip-knee joint angles achieves an optimal balance between computational complexity and estimation accuracy.This study supports the accurate estimation of GRF,in outdoor gait testing.

Objective To propose a decision tree-based optimization algorithm to shorten the time spent and to improve the decision-making efficiency for medical device fault diagnosis.Methods Firstly,a binarized fault state space for medical equipment was constructed;secondly,the binarized fault state space was simplified with logical functions;finally,a greedy algorithm was applied to iterative judgment to build a decision tree for medical device fault diagnosis.The algorithm proposed was compared with the greedy algorithm,Gini coefficient method and random forest algorithm in terms of the result accuracy and time cost and the influences of fault probability distribution and time-consuming differences for the algorithms.A case study on gastric lavage machine fault diagnosis was conducted to demonstrate the algorithm.Results The algorithm proposed behaved better than the greedy algorithm,Gini coefficient method and random forest algorithm in lowered time cost and result accuracy.However,the algorithm showed a decrease in accuracy for the logarithmic distribution of the detection method's time consumption,and it was not sensitive to the changes in the failure rate distribution.The gastric lavage machine case study demonstrated that the algorithm was functionally similar to an experienced engineer.Conclusion The proposed algorithm with overall perspective effectively enhances fault judgment efficiency and facilitates rapid diagnostic decision-making in medical equipment maintenance.[Chinese Medical Equipment Journal,2025,46(5):78-83]

Three evaluation methods were recommended for the key properties of the intravascular catheter lubricating coating such as stability,lubricity and integrity,including insoluble particle test method,friction test procedure and appearance detection method.Fifteen batches of microcatheters produced by different manufacturers were selected for testing to clarify the three methods in test principle,step,result,characteristic.References were provided for the design,production,evaluation and regulation of intravascular catheters with lubricant coatings.[Chinese Medical Equipment Journal,2025,46(1):66-72]

Objective To measure and analyze anatomic parameters of resected distal femurs and proximal tibias in Kaschin-Beck disease(KBD)and osteoarthritic(OA)knees which fit for total knee arthroplasty(TKA),so as to provide basis for designing suitable knee prosthesis for KBD patients.Methods A total of 154 knees(75 KBD and 79 OA)fitting for TKA underwent three-dimensional reconstruction;resection of distal femurs and proximal tibias was simulated during TKA.We measured the distal femoral mediolateral(fML),lateral anteroposterior(fLAP),medial anteroposterior(fMAP),medial condylar width(fMCW),lateral condylar width(fLCW)and fML/fLAP aspect ratio,proximal tibial mediolateral(tML),middle anteroposterior(tAP),medial anteroposterior(tMAP),lateral anteroposterior(tLAP)dimension,and tML/tAP aspect ratio to compare the morphometric differences between KBD and OA knees.Results The measured anatomic parameters of resected distal femurs and proximal tibias in both male and female patients of KBD group were smaller than those of OA knees(P＜0.01).We also found that KBD group had larger distal femur fML/fLAP and proximal tibia tML/tAP aspect ratios than those of OA knees(P＜0.01).This indicated that under a given AP dimension,KBD knees need an oval-shaped prosthesis with a wider ML length and more spherical-shaped prosthesis with relatively narrow ML dimensions in OA knees.Conclusion The anatomy of distal femurs and proximal tibias shows significant differences in size and shape between KBD and OA knees,which provides theoretical basis for designing proper knee prosthesis for KBD patients.