Background: This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS). Methods: Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied. Results: With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions. Conclusions The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.

Background: The removal of a well-fixed acetabular cup is a challenging, labor-intensive, and time-consuming step during revision hip arthroplasty. Although the advent of the manual osteotome, Explant, has simplified the procedure, it is still a stressful process as it dissipates the surgeon’s strength and time and risks an iatrogenic pelvic fracture. Recently, EZX, a powered tool for extraction of well-fixed acetabular cups with semicircular blade was invented. This study aimed to compare Explant and EZX in an experimental condition for their efficacy and safety. Methods: Cementless acetabular cups were press-fitted to 20 hemipelvic polyurethane models using foam adhesives. Ten cups were removed with each tool for comparison of the elapsed time, loads on the entire hemipelvis, periacetabular strain and temperature, volume of periacetabular bone removed, and diameter of the remaining acetabular rim. Strains and loads were quantitatively assessed using strain gauges and load cells for precise and reliable measurements. Results: The mean duration required to remove a well-fixed cup with EZX was 38.5 seconds (range, 25–55), whereas that with Explant was 543.7 seconds (range, 214–1,051) (p < 0.001). The load on the entire hemipelvis with EZX (mean, 9.1 kgf; range, 6.4–11.3) was 33% lower than that with Explant (mean, 13.6 kgf; range, 9.2–17.1) (p < 0.001). The periacetabular peak strains at the 3 positions with EZX were significantly lower than those with Explant (p < 0.001). The temperature during the removal did not differ significantly between the 2 tools. Although the mean volume of bone loss with Explant was 2.4 mL more than that with EZX (p < 0.001), the mean diameters of the remaining acetabular rim were not significantly different, measuring 54.1 mm with both tools. Conclusions The present experiment revealed that a well-fixed cup could be removed using a powered tool with less strength and time and less load on the entire pelvis. Although the powered tool removed a larger volume of bone, the diameters of the remaining acetabular rims were equivalent. This tool may help surgeons remove well-fixed cups in a short time and reduce the deforming load on the bone around the cup without increasing the size of the subsequent reconstruction cup.

Background/Aims: The Korean guidelines for Helicobacter pylori treatment were revised in 2020, however, the extent of adherence to these guidelines in clinical practice remains unclear. Herein, we initiated a prospective, nationwide, multicenter registry study in 2021 to evaluate the current management of H.pylori infection in Korea. Methods: This interim report describes the adherence to the revised guidelines and their impact on firstline eradication rates. Data on patient demographics, diagnoses, treatments, and eradication outcomes were collected using a web-based electronic case report form. Results: A total of 7,261 patients from 66 hospitals who received first-line treatment were analyzed.The modified intention-to-treat eradication rate for first-line treatment was 81.0%, with 80.4% of the prescriptions adhering to the revised guidelines. The most commonly prescribed regimen was the 14-day clarithromycin-based triple therapy (CTT; 42.0%), followed by tailored therapy (TT; 21.2%), 7-day CTT (14.1%), and 10-day concomitant therapy (CT; 10.1%). Time-trend analysis demonstrated significant increases in guideline adherence and the use of 10-day CT and TT, along with a decrease in the use of 7-day CTT (all p<0.001). Multivariate logistic regression analysis revealed that guideline adherence was significantly associated with first-line eradication success (odds ratio, 2.03; 95% confidence interval, 1.61 to 2.56; p<0.001). Conclusions The revised guidelines for the treatment of H. pylori infection have been increasingly adopted in routine clinical practice in Korea, which may have contributed to improved first-line eradication rates. Notably, the 14-day CTT, 10-day CT, and TT regimens are emerging as the preferred first-line treatment options among Korean physicians.

Suicidal cases involving sodium nitrite have been reported worldwide. However, postmortem features, such as brownish or grayish livor mortis, remain difficult to interpret, especially as decomposition advances. Here, we present three fatal cases (2020-2023) presumably caused by sodium nitrite ingestion. In these cases, characteristic nitrite-induced changes were inconsistent or obscured by decomposition, but ingestion traces (cup or bottle near the decedents) were observed at each scene. Additionally, containers labeled “sodium nitrite” were found in two cases; however, since sodium nitrite is designated a suicide-hazardous material in South Korea, future scenes may rarely reveal such clear labeling. Although autopsy, including methemoglobin testing, can confirm the cause of death, any delay in the investigative process risks the loss of critical evidence about the ingestion process and other factors. This underscores the importance of focusing on early scene evidence, particularly ingestion traces, and conducting thorough chemical and forensic examinations. Our findings illustrate that timely detection of ingestion-related evidence and subsequent forensic analysis, in conjunction with autopsy results, can elucidate a decedent’s cause and manner of death and clarify any criminal implications.

Incidentally detected gallbladder polyps (GBPs) and gallbladder wall thickening (GBWT) are frequently encountered in clinical practice. However, characterizing GBPs and GBWT in asymptomatic patients can be challenging and may result in overtreatment, including unnecessary follow-ups or surgeries. The Korean Society of Abdominal Radiology (KSAR) Clinical Practice Guideline Committee has developed expert recommendations that focus on standardized imaging interpretation and follow-up strategies for both GBPs and GBWT, with support from the Korean Society of Radiology and KSAR. These guidelines, which address 24 key questions, aim to standardize the approach for the interpretation of imaging findings, reporting, imaging-based workups, and surveillance of incidentally detected GBPs and GBWT. This recommendation promotes evidence-based practice, facilitates communication between radiologists and referring physicians, and reduces unnecessary interventions.

Incidentally detected gallbladder polyps (GBPs) and gallbladder wall thickening (GBWT) are frequently encountered in clinical practice. However, characterizing GBPs and GBWT in asymptomatic patients can be challenging and may result in overtreatment, including unnecessary follow-ups or surgeries. The Korean Society of Abdominal Radiology (KSAR) Clinical Practice Guideline Committee has developed expert recommendations that focus on standardized imaging interpretation and follow-up strategies for both GBPs and GBWT, with support from the Korean Society of Radiology and KSAR. These guidelines, which address 24 key questions, aim to standardize the approach for the interpretation of imaging findings, reporting, imaging-based workups, and surveillance of incidentally detected GBPs and GBWT. This recommendation promotes evidence-based practice, facilitates communication between radiologists and referring physicians, and reduces unnecessary interventions.

Suicidal cases involving sodium nitrite have been reported worldwide. However, postmortem features, such as brownish or grayish livor mortis, remain difficult to interpret, especially as decomposition advances. Here, we present three fatal cases (2020-2023) presumably caused by sodium nitrite ingestion. In these cases, characteristic nitrite-induced changes were inconsistent or obscured by decomposition, but ingestion traces (cup or bottle near the decedents) were observed at each scene. Additionally, containers labeled “sodium nitrite” were found in two cases; however, since sodium nitrite is designated a suicide-hazardous material in South Korea, future scenes may rarely reveal such clear labeling. Although autopsy, including methemoglobin testing, can confirm the cause of death, any delay in the investigative process risks the loss of critical evidence about the ingestion process and other factors. This underscores the importance of focusing on early scene evidence, particularly ingestion traces, and conducting thorough chemical and forensic examinations. Our findings illustrate that timely detection of ingestion-related evidence and subsequent forensic analysis, in conjunction with autopsy results, can elucidate a decedent’s cause and manner of death and clarify any criminal implications.

Background: This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS). Methods: Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied. Results: With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions. Conclusions The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.

Background: The removal of a well-fixed acetabular cup is a challenging, labor-intensive, and time-consuming step during revision hip arthroplasty. Although the advent of the manual osteotome, Explant, has simplified the procedure, it is still a stressful process as it dissipates the surgeon’s strength and time and risks an iatrogenic pelvic fracture. Recently, EZX, a powered tool for extraction of well-fixed acetabular cups with semicircular blade was invented. This study aimed to compare Explant and EZX in an experimental condition for their efficacy and safety. Methods: Cementless acetabular cups were press-fitted to 20 hemipelvic polyurethane models using foam adhesives. Ten cups were removed with each tool for comparison of the elapsed time, loads on the entire hemipelvis, periacetabular strain and temperature, volume of periacetabular bone removed, and diameter of the remaining acetabular rim. Strains and loads were quantitatively assessed using strain gauges and load cells for precise and reliable measurements. Results: The mean duration required to remove a well-fixed cup with EZX was 38.5 seconds (range, 25–55), whereas that with Explant was 543.7 seconds (range, 214–1,051) (p < 0.001). The load on the entire hemipelvis with EZX (mean, 9.1 kgf; range, 6.4–11.3) was 33% lower than that with Explant (mean, 13.6 kgf; range, 9.2–17.1) (p < 0.001). The periacetabular peak strains at the 3 positions with EZX were significantly lower than those with Explant (p < 0.001). The temperature during the removal did not differ significantly between the 2 tools. Although the mean volume of bone loss with Explant was 2.4 mL more than that with EZX (p < 0.001), the mean diameters of the remaining acetabular rim were not significantly different, measuring 54.1 mm with both tools. Conclusions The present experiment revealed that a well-fixed cup could be removed using a powered tool with less strength and time and less load on the entire pelvis. Although the powered tool removed a larger volume of bone, the diameters of the remaining acetabular rims were equivalent. This tool may help surgeons remove well-fixed cups in a short time and reduce the deforming load on the bone around the cup without increasing the size of the subsequent reconstruction cup.

Background/Aims: The Korean guidelines for Helicobacter pylori treatment were revised in 2020, however, the extent of adherence to these guidelines in clinical practice remains unclear. Herein, we initiated a prospective, nationwide, multicenter registry study in 2021 to evaluate the current management of H.pylori infection in Korea. Methods: This interim report describes the adherence to the revised guidelines and their impact on firstline eradication rates. Data on patient demographics, diagnoses, treatments, and eradication outcomes were collected using a web-based electronic case report form. Results: A total of 7,261 patients from 66 hospitals who received first-line treatment were analyzed.The modified intention-to-treat eradication rate for first-line treatment was 81.0%, with 80.4% of the prescriptions adhering to the revised guidelines. The most commonly prescribed regimen was the 14-day clarithromycin-based triple therapy (CTT; 42.0%), followed by tailored therapy (TT; 21.2%), 7-day CTT (14.1%), and 10-day concomitant therapy (CT; 10.1%). Time-trend analysis demonstrated significant increases in guideline adherence and the use of 10-day CT and TT, along with a decrease in the use of 7-day CTT (all p<0.001). Multivariate logistic regression analysis revealed that guideline adherence was significantly associated with first-line eradication success (odds ratio, 2.03; 95% confidence interval, 1.61 to 2.56; p<0.001). Conclusions The revised guidelines for the treatment of H. pylori infection have been increasingly adopted in routine clinical practice in Korea, which may have contributed to improved first-line eradication rates. Notably, the 14-day CTT, 10-day CT, and TT regimens are emerging as the preferred first-line treatment options among Korean physicians.