Echinococcosis, caused by the tapeworm Echinococcus, is rare in Korea and is primarily imported from endemic areas. We report a case of a 37-year-old Korean man with multiple large hepatic cysts, initially diagnosed as simple cysts at a local clinic in 2018. The patient had lived in Oman, an endemic area, for several months in 2016. Upon referral to a tertiary hospital in 2023, due to progressive cyst enlargement, liver magnetic resonance imaging revealed three large cysts with a water lily sign. Serum IgG against Echinococcus was positive by enzyme-linked immunosorbent assay. After diagnosis of echinococcosis, treatment with albendazole and puncture-aspiration-injection-reaspiration (PAIR) was performed.Microscopic and molecular analysis of cyst aspirates confirmed Echinococcus granulosus infection. Follow-up computed tomography demonstrated a reduction in cyst size, yet the emergence of a new right pleural effusion and consolidation in the left lower lobe of the lung necessitated the continuation of albendazole therapy. This case highlights the importance of thorough travel history, imaging findings, and the effectiveness of PAIR combined with albendazole in treating imported echinococcosis.

Echinococcosis, caused by the tapeworm Echinococcus, is rare in Korea and is primarily imported from endemic areas. We report a case of a 37-year-old Korean man with multiple large hepatic cysts, initially diagnosed as simple cysts at a local clinic in 2018. The patient had lived in Oman, an endemic area, for several months in 2016. Upon referral to a tertiary hospital in 2023, due to progressive cyst enlargement, liver magnetic resonance imaging revealed three large cysts with a water lily sign. Serum IgG against Echinococcus was positive by enzyme-linked immunosorbent assay. After diagnosis of echinococcosis, treatment with albendazole and puncture-aspiration-injection-reaspiration (PAIR) was performed.Microscopic and molecular analysis of cyst aspirates confirmed Echinococcus granulosus infection. Follow-up computed tomography demonstrated a reduction in cyst size, yet the emergence of a new right pleural effusion and consolidation in the left lower lobe of the lung necessitated the continuation of albendazole therapy. This case highlights the importance of thorough travel history, imaging findings, and the effectiveness of PAIR combined with albendazole in treating imported echinococcosis.

Heart failure (HF) is a major cause of mortality and morbidity in South Korea, imposing substantial physical, emotional, and financial burdens on patients and society. Despite the high burden of symptom and complex care needs of HF patients, palliative care and hospice services remain underutilized in South Korea due to cultural, institutional, and knowledge-related barriers. This position statement from the Korean Society of Heart Failure emphasizes the need for integrating palliative and hospice care into HF management to improve quality of life and support holistic care for patients and their families. By clarifying the role of palliative care in HF and proposing practical referral criteria, this position statement aims to bridge the gap between HF and palliative care services in South Korea, ultimately improving patient-centered outcomes and aligning treatment with the goals and values of HF patients.

Echinococcosis, caused by the tapeworm Echinococcus, is rare in Korea and is primarily imported from endemic areas. We report a case of a 37-year-old Korean man with multiple large hepatic cysts, initially diagnosed as simple cysts at a local clinic in 2018. The patient had lived in Oman, an endemic area, for several months in 2016. Upon referral to a tertiary hospital in 2023, due to progressive cyst enlargement, liver magnetic resonance imaging revealed three large cysts with a water lily sign. Serum IgG against Echinococcus was positive by enzyme-linked immunosorbent assay. After diagnosis of echinococcosis, treatment with albendazole and puncture-aspiration-injection-reaspiration (PAIR) was performed.Microscopic and molecular analysis of cyst aspirates confirmed Echinococcus granulosus infection. Follow-up computed tomography demonstrated a reduction in cyst size, yet the emergence of a new right pleural effusion and consolidation in the left lower lobe of the lung necessitated the continuation of albendazole therapy. This case highlights the importance of thorough travel history, imaging findings, and the effectiveness of PAIR combined with albendazole in treating imported echinococcosis.

Echinococcosis, caused by the tapeworm Echinococcus, is rare in Korea and is primarily imported from endemic areas. We report a case of a 37-year-old Korean man with multiple large hepatic cysts, initially diagnosed as simple cysts at a local clinic in 2018. The patient had lived in Oman, an endemic area, for several months in 2016. Upon referral to a tertiary hospital in 2023, due to progressive cyst enlargement, liver magnetic resonance imaging revealed three large cysts with a water lily sign. Serum IgG against Echinococcus was positive by enzyme-linked immunosorbent assay. After diagnosis of echinococcosis, treatment with albendazole and puncture-aspiration-injection-reaspiration (PAIR) was performed.Microscopic and molecular analysis of cyst aspirates confirmed Echinococcus granulosus infection. Follow-up computed tomography demonstrated a reduction in cyst size, yet the emergence of a new right pleural effusion and consolidation in the left lower lobe of the lung necessitated the continuation of albendazole therapy. This case highlights the importance of thorough travel history, imaging findings, and the effectiveness of PAIR combined with albendazole in treating imported echinococcosis.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.