Purpose: Due to chronic toxicity, tacrolimus-sparing is an important issue in kidney transplant recipients (KTRs). Several studies have shown that bisphosphonate use is associated with favorable graft outcomes in KTRs. We investigated whether the association between tacrolimus trough levels (TTLs) and graft outcomes differed according to bisphosphonate use in KTRs. Materials and Methods: We conducted a retrospective study encompassing 1441 KTRs who were administered tacrolimus-based immunosuppressants. The primary exposure was a time-dependent cross-product of TTLs (low TTLs vs. normal-high TTLs with a reference of 6 ng/mL) and bisphosphonate use. Two primary outcomes were evaluated: overall graft loss (death or conversion to kidney replacement) and an estimated glomerular filtration rate (eGFR) <30 mL/min/1.73 m 2 . Results: During the median follow-up of 6.1 (3.4–9.7) years, overall graft loss occurred in 157 (10.9%) patients. Cox regression revealed that normal-high TTLs without bisphosphonate use were associated with a reduced risk of overall graft loss [adjusted hazard ratio (aHR), 0.65; 95% confidence interval (CI), 0.45–0.95] compared to low TTLs without bisphosphonate use. The use of bisphosphonate in conjunction with normal-high TTLs correlated with an even lower risk of overall graft loss (aHR, 0.25; 95% CI, 0.08–0.80) compared with low TTLs without bisphosphonate use. In patients with low TTLs, bisphosphonate use was associated with a reduced risk of overall graft loss compared with non-use (aHR, 0.20; 95% CI, 0.09–0.43). Similar trends were observed in the eGFR outcome. Conclusion The use of bisphosphonate was associated with favorable graft outcomes, even with low TTLs. Incorporating bisphosphonate into a conventional immunosuppressant regimen may potentially reduce tacrolimus requirement.

Echinococcosis, caused by the tapeworm Echinococcus, is rare in Korea and is primarily imported from endemic areas. We report a case of a 37-year-old Korean man with multiple large hepatic cysts, initially diagnosed as simple cysts at a local clinic in 2018. The patient had lived in Oman, an endemic area, for several months in 2016. Upon referral to a tertiary hospital in 2023, due to progressive cyst enlargement, liver magnetic resonance imaging revealed three large cysts with a water lily sign. Serum IgG against Echinococcus was positive by enzyme-linked immunosorbent assay. After diagnosis of echinococcosis, treatment with albendazole and puncture-aspiration-injection-reaspiration (PAIR) was performed.Microscopic and molecular analysis of cyst aspirates confirmed Echinococcus granulosus infection. Follow-up computed tomography demonstrated a reduction in cyst size, yet the emergence of a new right pleural effusion and consolidation in the left lower lobe of the lung necessitated the continuation of albendazole therapy. This case highlights the importance of thorough travel history, imaging findings, and the effectiveness of PAIR combined with albendazole in treating imported echinococcosis.

Heart failure (HF) is a major cause of mortality and morbidity in South Korea, imposing substantial physical, emotional, and financial burdens on patients and society. Despite the high burden of symptom and complex care needs of HF patients, palliative care and hospice services remain underutilized in South Korea due to cultural, institutional, and knowledge-related barriers. This position statement from the Korean Society of Heart Failure emphasizes the need for integrating palliative and hospice care into HF management to improve quality of life and support holistic care for patients and their families. By clarifying the role of palliative care in HF and proposing practical referral criteria, this position statement aims to bridge the gap between HF and palliative care services in South Korea, ultimately improving patient-centered outcomes and aligning treatment with the goals and values of HF patients.

Echinococcosis, caused by the tapeworm Echinococcus, is rare in Korea and is primarily imported from endemic areas. We report a case of a 37-year-old Korean man with multiple large hepatic cysts, initially diagnosed as simple cysts at a local clinic in 2018. The patient had lived in Oman, an endemic area, for several months in 2016. Upon referral to a tertiary hospital in 2023, due to progressive cyst enlargement, liver magnetic resonance imaging revealed three large cysts with a water lily sign. Serum IgG against Echinococcus was positive by enzyme-linked immunosorbent assay. After diagnosis of echinococcosis, treatment with albendazole and puncture-aspiration-injection-reaspiration (PAIR) was performed.Microscopic and molecular analysis of cyst aspirates confirmed Echinococcus granulosus infection. Follow-up computed tomography demonstrated a reduction in cyst size, yet the emergence of a new right pleural effusion and consolidation in the left lower lobe of the lung necessitated the continuation of albendazole therapy. This case highlights the importance of thorough travel history, imaging findings, and the effectiveness of PAIR combined with albendazole in treating imported echinococcosis.

Echinococcosis, caused by the tapeworm Echinococcus, is rare in Korea and is primarily imported from endemic areas. We report a case of a 37-year-old Korean man with multiple large hepatic cysts, initially diagnosed as simple cysts at a local clinic in 2018. The patient had lived in Oman, an endemic area, for several months in 2016. Upon referral to a tertiary hospital in 2023, due to progressive cyst enlargement, liver magnetic resonance imaging revealed three large cysts with a water lily sign. Serum IgG against Echinococcus was positive by enzyme-linked immunosorbent assay. After diagnosis of echinococcosis, treatment with albendazole and puncture-aspiration-injection-reaspiration (PAIR) was performed.Microscopic and molecular analysis of cyst aspirates confirmed Echinococcus granulosus infection. Follow-up computed tomography demonstrated a reduction in cyst size, yet the emergence of a new right pleural effusion and consolidation in the left lower lobe of the lung necessitated the continuation of albendazole therapy. This case highlights the importance of thorough travel history, imaging findings, and the effectiveness of PAIR combined with albendazole in treating imported echinococcosis.

Echinococcosis, caused by the tapeworm Echinococcus, is rare in Korea and is primarily imported from endemic areas. We report a case of a 37-year-old Korean man with multiple large hepatic cysts, initially diagnosed as simple cysts at a local clinic in 2018. The patient had lived in Oman, an endemic area, for several months in 2016. Upon referral to a tertiary hospital in 2023, due to progressive cyst enlargement, liver magnetic resonance imaging revealed three large cysts with a water lily sign. Serum IgG against Echinococcus was positive by enzyme-linked immunosorbent assay. After diagnosis of echinococcosis, treatment with albendazole and puncture-aspiration-injection-reaspiration (PAIR) was performed.Microscopic and molecular analysis of cyst aspirates confirmed Echinococcus granulosus infection. Follow-up computed tomography demonstrated a reduction in cyst size, yet the emergence of a new right pleural effusion and consolidation in the left lower lobe of the lung necessitated the continuation of albendazole therapy. This case highlights the importance of thorough travel history, imaging findings, and the effectiveness of PAIR combined with albendazole in treating imported echinococcosis.

Objective: Primary frozen shoulder causes significant pain and progressively restricts shoulder movements. Diagnosis is made clinically based on patient history and physical examination. Management is mainly non-invasive owing to its self-limiting clinical course. However, clinical practice guidelines for frozen shoulder have not yet been developed in Korea. The developed guidelines aim to provide evidence-based recommendations for the diagnosis and treatment of frozen shoulder. Methods: A guideline development committee reviewed the literature from four databases (PubMed, Embase, Cochrane Library, and KMbase). Using the Population, Intervention, Comparator, and Outcome (PICO) framework, the committee formulated two backgrounds and 16 key questions to address common clinical concerns. Recommendations were made using the Grading of Recommendations, Assessment, Development, and Evaluation framework. Results: Diabetes, thyroid disease, and dyslipidemia significantly increase the risk of developing a frozen shoulder. Although frozen shoulder is often self-limiting, some patients may experience long-term functional disabilities. Ultrasound and magnetic resonance imaging should be used as adjunctive tools alongside clinical diagnosis, and rather than as independent diagnostic methods. Noninvasive approaches, such as medications, physical modalities, exercises, electrical stimulation, and manual therapy, may reduce pain and improve shoulder function. Other noninvasive interventions have limited evidence, and their application should be based on clinical judgment. Intra-articular steroid injections are recommended for treatment, and physiotherapy or hydrodilation with steroid injections can also be beneficial. Conclusion These guidelines provide evidence-based recommendations for diagnosing and treating primary frozen shoulder.

This study aimed to develop a machine learning-based 2-year risk prediction model for early identification of patients with rapid progressive immunoglobulin A nephropathy (IgAN). We also assessed the model’s performance to predict the long-term kidney-related outcome of patients. Methods: A retrospective cohort of 1,301 patients with biopsy-proven IgAN from two tertiary hospitals was used to derive and externally validate a random forest-based prediction model predicting primary outcome (30% decline in estimated glomerular filtration rate from baseline or end-stage kidney disease requiring renal replacement therapy) and secondary outcome (improvement of proteinuria) within 2 years after kidney biopsy. Results: For the 2-year prediction of primary outcomes, precision, recall, area-under-the-curve, precision-recall-curve, F1, and Brier score were 0.259, 0.875, 0.771, 0.242, 0.400, and 0.309, respectively. The values for the secondary outcome were 0.904, 0.971, 0.694, 0.903, 0.955, and 0.113, respectively. From Shapley Additive exPlanations analysis, the most informative feature identifying both outcomes was baseline proteinuria. When Kaplan-Meier analysis for 10-year kidney outcome risk was performed with three groups by predicting probabilities derived from the 2-year primary outcome prediction model (low, moderate, and high), high (hazard ratio [HR], 13.00; 95% confidence interval [CI], 9.52–17.77) and moderate (HR, 12.90; 95% CI, 9.92–16.76) groups showed higher risks compared with the low group. From the 2-year secondary outcome prediction model, low (HR, 1.66; 95% CI, 1.42–1.95) and moderate (HR, 1.42; 95% CI, 0.99–2.03) groups were at greater risk for 10-year prognosis than the high group. Conclusion: Our machine learning-based 2-year risk prediction models for the progression of IgAN showed reliable performance and effectively predicted long-term kidney outcome.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.