To assess the implantation effectiveness of porous scaffolds, it is essential to consider not only their mechanical properties but also their biological performance. Given the high cost, long duration and low reproducibility of biological experiments, simulation studies as a virtual alternative, have become a widely adopted and efficient evaluation method. In this study, based on the secondary development environment of finite element analysis software, the strain energy density growth criterion for bone tissue was introduced to simulate and analyze the cell proliferation-promoting effects of four different lattice porous scaffolds under cyclic compressive loading. The biological performance of these scaffolds was evaluated accordingly. The computational results indicated that in the early stages of bone growth, the differences in bone tissue formation among the scaffold groups were not significant. However, as bone growth progressed, the scaffold with a porosity of 70% and a pore size of 900 μm demonstrated markedly superior bone formation compared to other porosity groups and pore size groups. These results suggested that the scaffold with a porosity of 70% and a pore size of 900 μm was most conducive to bone tissue growth and could be regarded as the optimal structural parameter for bone repair scaffold. In conclusion, this study used a visualized simulation approach to pre-evaluate the osteogenic potential of porous scaffolds, aiming to provide reliable data support for the optimized design and clinical application of implantable scaffolds.
Tissue Scaffolds/chemistry* ; Porosity ; Finite Element Analysis ; Tissue Engineering/methods* ; Computer Simulation ; Bone Development ; Osteogenesis ; Humans ; Cell Proliferation

The three-dimensional (3D) printed bone tissue repair guide scaffold is considered a promising method for treating bone defect repair. In this experiment, chitosan (CS), sodium alginate (SA), and mineralized collagen (MC) were combined and 3D printed to form scaffolds. The experimental results showed that the printability of the scaffold was improved with the increase of chitosan concentration. Infrared spectroscopy analysis confirmed that the scaffold formed a cross-linked network through electrostatic interaction between chitosan and sodium alginate under acidic conditions, and X-ray diffraction results showed the presence of characteristic peaks of hydroxyapatite, indicating the incorporation of mineralized collagen into the scaffold system. In the in vitro collagen release experiments, a weakly alkaline environment was found to accelerate the release rate of collagen, and the release amount increased significantly with a lower concentration of chitosan. Cell experiments showed that scaffolds loaded with mineralized collagen could significantly promote cell proliferation activity and alkaline phosphatase expression. The subcutaneous implantation experiment further verified the biocompatibility of the material, and the implantation of printed scaffolds did not cause significant inflammatory reactions. Histological analysis showed no abnormal pathological changes in the surrounding tissues. Therefore, incorporating mineralized collagen into sodium alginate/chitosan scaffolds is believed to be a new tissue engineering and regeneration strategy for achieving enhanced osteogenic differentiation through the slow release of collagen.
Chitosan/chemistry* ; Alginates/chemistry* ; Tissue Scaffolds/chemistry* ; Printing, Three-Dimensional ; Osteogenesis ; Collagen/chemistry* ; Cell Differentiation ; Animals ; Tissue Engineering/methods* ; Cell Proliferation ; Biocompatible Materials ; Glucuronic Acid/chemistry* ; Hexuronic Acids/chemistry*

OBJECTIVE: To summarize the research progress of bioactive scaffolds in the repair and regeneration of osteoporotic bone defects. METHODS: Recent literature on bioactive scaffolds for the repair of osteoporotic bone defects was reviewed to summarize various types of bioactive scaffolds and their associated repair methods. RESULTS: The application of bioactive scaffolds provides a new idea for the repair and regeneration of osteoporotic bone defects. For example, calcium phosphate ceramics scaffolds, hydrogel scaffolds, three-dimensional (3D)-printed biological scaffolds, metal scaffolds, as well as polymer material scaffolds and bone organoids, have all demonstrated good bone repair-promoting effects. However, in the pathological bone microenvironment of osteoporosis, the function of single-material scaffolds to promote bone regeneration is insufficient. Therefore, the design of bioactive scaffolds must consider multiple factors, including material biocompatibility, mechanical properties, bioactivity, bone conductivity, and osteogenic induction. Furthermore, physical and chemical surface modifications, along with advanced biotechnological approaches, can help to improve the osteogenic microenvironment and promote the differentiation of bone cells. CONCLUSION With advancements in technology, the synergistic application of 3D bioprinting, bone organoids technologies, and advanced biotechnologies holds promise for providing more efficient bioactive scaffolds for the repair and regeneration of osteoporotic bone defects.
Humans ; Tissue Scaffolds/chemistry* ; Bone Regeneration ; Osteoporosis/therapy* ; Tissue Engineering/methods* ; Biocompatible Materials/chemistry* ; Printing, Three-Dimensional ; Calcium Phosphates/chemistry* ; Osteogenesis ; Ceramics ; Cell Differentiation ; Hydrogels ; Bioprinting ; Bone and Bones

OBJECTIVE: To summarize the latest research progress of graphene and its derivatives (GDs) in bone repair. METHODS: The relevant research literature at home and abroad in recent years was extensively accessed. The properties of GDs in bone repair materials, including mechanical properties, electrical conductivity, and antibacterial properties, were systematically summarized, and the unique advantages of GDs in material preparation, functionalization, and application, as well as the contributions and challenges to bone tissue engineering, were discussed. RESULTS: The application of GDs in bone repair materials has broad prospects, and the functionalization and modification technology effectively improve the osteogenic activity and material properties of GDs. GDs can induce osteogenic differentiation of stem cells through specific signaling pathways and promote osteogenic activity through immunomodulatory mechanisms. In addition, the parameters of GDs have significant effects on the cytotoxicity and degradation behavior. CONCLUSION GDs has great potential in the field of bone repair because of its excellent physical and chemical properties and biological properties. However, the cytotoxicity, biodegradability, and functionalization strategies of GDs still need to be further studied in order to achieve a wider application in the field of bone tissue engineering.
Graphite/pharmacology* ; Tissue Engineering/methods* ; Humans ; Osteogenesis/drug effects* ; Biocompatible Materials/pharmacology* ; Bone Regeneration ; Tissue Scaffolds/chemistry* ; Cell Differentiation ; Bone and Bones ; Bone Substitutes/chemistry* ; Animals

OBJECTIVE: To investigate the antioxidant and osteogenic induction capabilities of calcium phosphate nanoflowers (hereinafter referred to as nanoflowers) in vitro at different concentrations. METHODS: Nanoflowers were prepared using gelatin, tripolyphosphate, and calcium chloride. Their morphology, microstructure, elemental composition and distribution, diameter, and molecular constitution were characterized using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and energy-dispersive spectroscopy. Femurs and tibias were harvested from twelve 4-week-old Sprague Dawley rats, and bone marrow mesenchymal stem cells (BMSCs) were isolated and cultured using the whole bone marrow adherent method, followed by passaging. The third passage cells were identified as stem cells by flow cytometry and then co-cultured with nanoflowers at concentrations of 0, 0.4, 0.8, 1.2, 1.6, 2.0, 2.4, 2.8, 3.2, and 3.6 mg/mL. Cell counting kit 8 (CCK-8) assay was performed to screen for the optimal concentration that demonstrated the best cell viability, which was subsequently used as the experimental concentration for further studies. After co-culturing BMSCs with the screened concentration of nanoflowers, the biocompatibility of the nanoflowers was verified through live/dead cell staining, scratch assay, and cytoskeleton staining. The antioxidant capacity was assessed by using reactive oxygen species (ROS) fluorescence staining. The in vitro osteoinductive ability was evaluated via alkaline phosphatase (ALP) staining, alizarin red staining, and immunofluorescence staining of osteocalcin (OCN) and Runt-related transcription factor 2 (RUNX2). All the above indicators were compared with the control group of normally cultured BMSCs without the addition of nanoflowers. RESULTS: Scanning electron microscopy revealed that the prepared nanoflowers exhibited a flower-like structure; transmission electron microscopy scans discovered that the nanoflowers possessed a multi-layered structure, and high-magnification images displayed continuous atomic arrangements, with the nanoflower diameter measuring (2.00±0.25) μm; energy-dispersive spectroscopy indicated that the nanoflowers contained elements such as C, N, O, P, and Ca, which were uniformly distributed across the flower region; Fourier transform infrared spectroscopy analyzed the absorption peaks of each component, demonstrating the successful preparation of the nanoflowers. Through CCK-8 screening, the concentrations of 0.8, 1.2, and 1.6 mg/mL were selected for subsequent experiments. The live/dead cell staining showed that nanoflowers at different concentrations exhibited good cell compatibility, with the 1.2 mg/mL concentration being the best (P<0.05). The scratch assay results indicated that the cell migration ability in the 1.2 mg/mL group was superior to the other groups (P<0.05). The cytoskeleton staining revealed that the cell morphology was well-extended in all concentration groups, with no significant difference compared to the control group. The ROS fluorescence staining demonstrated that the ROS fluorescence in all concentration groups decreased compared to the control group after lipopolysaccharide induction (P<0.05), with the 1.2 mg/mL group showing the weakest fluorescence. The ALP staining showed blue-purple nodular deposits around the cells in all groups, with the 1.2 mg/mL group being significantly more prominent. The alizarin red staining displayed orange-red mineralized nodules around the cells in all groups, with the 1.2 mg/mL group having more and denser nodules. The immunofluorescence staining revealed that the expressions of RUNX2 and OCN proteins in all concentration groups increased compared to the control group, with the 1.2 mg/mL group showing the strongest protein expression (P<0.05). CONCLUSION The study successfully prepares nanoflowers, among which the 1.2 mg/mL nanoflowers exhibits excellent cell compatibility, antioxidant properties, and osteogenic induction capability, demonstrating their potential as an artificial bone substitute material.
Animals ; Osteogenesis/drug effects* ; Mesenchymal Stem Cells/drug effects* ; Calcium Phosphates/pharmacology* ; Rats, Sprague-Dawley ; Rats ; Antioxidants/chemistry* ; Cells, Cultured ; Cell Differentiation/drug effects* ; Nanostructures/chemistry* ; Tissue Engineering/methods* ; Bone Marrow Cells/cytology* ; Coculture Techniques ; Tissue Scaffolds/chemistry* ; Male ; Biocompatible Materials/chemistry* ; Cell Survival ; Core Binding Factor Alpha 1 Subunit/metabolism* ; Cell Proliferation

OBJECTIVE: To summarize recent research progress in hydrogel-based growth factors for treatment of intervertebral disc degeneration (IDD). METHODS: The relevant literature on hydrogel-based growth factors for IDD treatment at home and abroad was extensively reviewed, and their advantages and therapeutic effects in repairing IDD were analyzed and summarized. RESULTS: Hydrogels exhibit high hydration, biocompatibility, and biodegradability, enabling targeted delivery and sustained release of growth factors such as growth differentiation factors and transforming growth factors. This facilitates enhanced efficacy in promoting cell proliferation, extracellular matrix synthesis, and reducing inflammatory responses. Consequently, hydrogels demonstrate broad application prospects in the repair of IDD. CONCLUSION Research on hydrogel-based growth factors for treating IDD demonstrates advantages such as avoiding disc damage caused by repeated injections and controlling growth factor release concentrations. However, drawbacks include the limited variety of loaded growth factors and the need to verify the long-term stability and biocompatibility of hydrogels. Therefore, further research is required on aspects such as the types of loaded growth factors and the long-term stability and biocompatibility of hydrogels to establish an experimental foundation for their clinical application.
Intervertebral Disc Degeneration/therapy* ; Hydrogels/chemistry* ; Humans ; Intercellular Signaling Peptides and Proteins/administration & dosage* ; Biocompatible Materials/chemistry* ; Animals ; Tissue Engineering/methods* ; Cell Proliferation/drug effects* ; Drug Delivery Systems

OBJECTIVE: The triply periodic minimal surface (TPMS) Gyroid porous scaffolds were built with identical porosity while varying pore sizes were used by fluid mechanics finite element analysis (FEA) to simulate the in vivo microenvironment. The effects of scaffolds with different pore sizes on cell adhesion, proliferation, and osteogenic differentiation were evaluated through calculating fluid velocity, wall shear stress, and permeability in the scaffolds. METHODS: Three types of gyroid porous scaffolds, with pore sizes of 400, 600 and 800 μm, were established by nTopology software. Each scaffold had dimensions of 10 mm × 10 mm × 10 mm and isotropic internal structures. The models were imported to the ANSYS 2022R1 software, and meshed into over 3 million unstructured tetrahedral elements. Boun- dary conditions were set with inlet flow velocities of 0.01, 0.1, and 1 mm/s, and outlet pressure of 0 Pa. Pressure, velocity, and wall shear stress were calculated as fluid flowed through the scaffolds using the Navier-Stokes equations. At the same time, permeability was determined based on Darcy' s law. The compressive strength of scaffolds with different pore sizes was evaluated by ANSYS 2022R1 Static structural analysis. RESULTS: A linear relationship was observed between the wall shear stress and fluid velocity at inlet flow rates of 0.01, 0.1 and 1 mm/s, with increasing velocity leading to higher wall shear stress. At the flow velocity of 0.1 mm/s, the initial pressures of scaffolds with pore sizes of 400, 600 and 800 μm were 0.272, 0.083 and 0.079 Pa, respectively. The fluid pressures were gradually decreased across the scaffolds. The average flow velocities were 0.093, 0.078 and 0.070 mm/s, the average wall shear stresses 2.955, 1.343 and 1.706 mPa, permeabilities values 0.54×10^-8 1.80×10^-8 and 1.89×10^-8 m² in the scaffolds with pore sizes of 400, 600 and 800 μm. The scaffold surface area proportions according with optimal wall shear stress range for cell growth and osteogenic differentiation were calcula-ted, which was highest in the 600 μm scaffold (27.65%), followed by the 800 μm scaffold (17.30%) and the 400 μm scaffold (1.95%). The compressive strengths of the scaffolds were 23, 26 and 34 MPa for the 400, 600 and 800 μm pore sizes. CONCLUSION The uniform stress distributions appeared in all gyroid scaffold types under compressive stress. The permeabilities of scaffolds with pore sizes of 600 and 800 μm were significantly higher than the 400 μm. The average wall shear stress in the scaffold of 600 μm was the lowest, and the scaffold surface area proportion for cell growth and osteogenic differentiation the largest, indicating that it might be the most favorable design for supporting these cellular activities.
Tissue Scaffolds/chemistry* ; Porosity ; Finite Element Analysis ; Osteogenesis ; Cell Differentiation ; Cell Proliferation ; Tissue Engineering/methods* ; Hydrodynamics ; Humans ; Stress, Mechanical ; Cell Adhesion

OBJECTIVE: To identify the role of gene silencing or overexpression of Nemo-like kinase (NLK) during the process of neural differentiation of human mesenchymal stem cells (hBMSCs), and to explore the effect of NLK downregulation by transfection of small interfering RNA (siRNA) on promoting neuralized tissue engineered bone regeneration. METHODS: NLK-knockdown hBMSCs were established by transfection of siRNA (the experimental group was transfected with siRNA silencing the NLK gene, the control group was transfected with control siRNA and labeled as negative control group), and NLK-overexpression hBMSCs were established using lentivirus vector transfection technique (the experimental group was infected with lentivirus overexpressing the NLK gene, the control group was infected with an empty vector lentivirus and labeled as the empty vector group). After neurogenic induction, quantitative real-time polymerase chain reaction (qPCR) was used to detect the expression of neural-related gene, and Western blot as well as immunofluorescence staining about several specific neural markers were used to evaluate the neural differentiation ability of hBMSCs.6-week-old male nude mice were divided into 4 groups: ① β-tricalcium phosphate (β-TCP) group, ② β-TCP+ osteogenic induced hBMSCs group, ③ β-TCP+ siRNA-negative control (siRNA-NC) transfection hBMSCs group, ④ β-TCP+ siRNA-NLK transfection hBMSCs group. Four weeks after the subcutaneous ectopic osteogenesis models were established, the osteogenesis and neurogenesis were detected by hematoxylin-eosin (HE) staining, Masson staining and tissue immunofluorescence assay. Statistical analysis was conducted by independent sample t test. RESULTS: After gene silencing of NLK by siRNA in hBMSCs, neural-related genes, including the class Ⅲ β-tubulin (TUBB3), microtubule association protein-2 (MAP2), soluble protein-100 (S100), nestin (NES), NG2 proteoglycan (NG2) and calcitonin gene-related peptide (CGRP), were increased significantly in NLK-knockdown hBMSCs compared with the negative control group(P < 0.05), and the expression levels of TUBB3 and MAP2 of the NLK silencing group were also increased. Oppositely, after NLK was overexpressed using lentivirus vector transfection technique, TUBB3, MAP2, S100 and NG2 were significantly decreased in NLK-overexpression hBMSCs compared with the empty vector group (P < 0.05), and the expression level of TUBB3 was also decreased. 4 weeks after the subcutaneous ectopic osteogenesis model was established, more mineralized tissues were formed in the β-TCP+ siRNA-NLK transfection hBMSCs group compared with the other three groups, and the expression of BMP2 and S100 was higher in the β-TCP+ siRNA-NLK transfection hBMSCs group than in the other groups. CONCLUSION Gene silencing of NLK by siRNA promoted the ability of neural differentiation of hBMSCs in vitro and promoted neuralized tissue engineered bone formation in subcutaneous ectopic osteogenic models in vivo in nude mice.
Bone Regeneration/genetics* ; Animals ; Mesenchymal Stem Cells/cytology* ; Humans ; RNA, Small Interfering/genetics* ; Tissue Engineering/methods* ; Cell Differentiation ; Mice, Nude ; Gene Silencing ; Mice ; Male ; Protein Serine-Threonine Kinases/genetics* ; Intracellular Signaling Peptides and Proteins/genetics* ; Transfection ; Cells, Cultured ; Lentivirus/genetics*

Dental stem cells (DSCs), a distinct subset of mesenchymal stem cells (MSCs), are isolated from dental tissues, such as dental pulp, exfoliated deciduous teeth, periodontal ligament, and apical papilla. They have emerged as a promising source of stem cell therapy for tissue regeneration and autoimmune disorders. The main types of DSCs include dental pulp stem cells (DPSCs), stem cells from human exfoliated deciduous teeth (SHED), periodontal ligament stem cells (PDLSCs), and stem cells from apical papilla (SCAP). Each type exhibits distinct advantages: easy access via minimally invasive procedures, multi-lineage differentiation potential, and excellent ethical acceptability. DSCs have demonstrated outstanding clinical efficacy in oral and maxillofacial regeneration, and their long-term safety has been verified. In oral tissue regeneration, DSCs are highly effective in oral tissue regeneration for critical applications such as the restoration of dental pulp vitality and periodontal tissue repair. A defining advantage of DSCs lies in their ability to integrate with host tissues and promote physiological regeneration, which render them a better option for oral tissue regenerative therapies. Beyond oral applications, DSCs also exhibit promising potential in the treatment of systemic diseases, including type Ⅱ diabetes and autoimmune diseases due to their immunomodulatory effects. Moreover, extracellular vesicles (EVs) derived from DSCs act as critical mediators for DSCs' paracrine functions. Possessing regulatory properties similar to their parental cells, EVs are extensively utilized in research targeting tissue repair, immunomodulation, and regenerative therapy-offering a "cell-free" strategy to mitigate the limitations associated with cell-based therapies. Despite these advancements, standardizing large-scale manufacturing, maintaining strict quality control, and clarifying the molecular mechanisms underlying the interaction of DSCs and their EVs with recipient tissues remain major obstacles to the clinical translation of these treatments into broad clinical use. Addressing these barriers will be critical to enhancing their clinical applicability and therapeutic efficacy. In conclusion, DSCs and their EVs represent a transformative approach in regenerative medicine, and increasing clinical evidence supports their application in oral and systemic diseases. Continuous innovation remains essential to unlocking the widespread clinical potential of DSCs.
Humans ; Dental Pulp/cytology* ; Translational Research, Biomedical ; Mesenchymal Stem Cells/cytology* ; Periodontal Ligament/cytology* ; Stem Cells/cytology* ; Regeneration ; Tooth, Deciduous/cytology* ; Cell Differentiation ; Tissue Engineering/methods* ; Regenerative Medicine

Bone repair remains an important target in tissue engineering, making the development of bioactive scaffolds for effective bone defect repair a critical objective. In this study, β-tricalcium phosphate (β-TCP) scaffolds incorporated with processed pyritum decoction (PPD) were fabricated using three-dimensional (3D) printing-assisted freeze-casting. The produced composite scaffolds were evaluated for their mechanical strength, physicochemical properties, biocompatibility, in vitro pro-angiogenic activity, and in vivo efficacy in repairing rabbit femoral defects. They not only demonstrated excellent physicochemical properties, enhanced mechanical strength, and good biosafety but also significantly promoted the proliferation, migration, and aggregation of pro-angiogenic human umbilical vein endothelial cells (HUVECs). In vivo studies revealed that all scaffold groups facilitated osteogenesis at the bone defect site, with the β-TCP scaffolds loaded with PPD markedly enhancing the expression of neurogenic locus Notch homolog protein 1 (Notch1), vascular endothelial growth factor (VEGF), bone morphogenetic protein-2 (BMP-2), and osteopontin (OPN). Overall, the scaffolds developed in this study exhibited strong angiogenic and osteogenic capabilities both in vitro and in vivo. The incorporation of PPD notably promoted the angiogenic-osteogenic coupling, thereby accelerating bone repair, which suggests that PPD is a promising material for bone repair and that the PPD/β-TCP scaffolds hold great potential as a bone graft alternative.
Calcium Phosphates/chemistry* ; Animals ; Bone Regeneration ; Rabbits ; Tissue Scaffolds ; Printing, Three-Dimensional ; Humans ; Human Umbilical Vein Endothelial Cells ; Neovascularization, Physiologic ; Osteogenesis ; Tissue Engineering/methods* ; Biomimetic Materials ; Cell Proliferation ; Angiogenesis