Ecological cultivation is an important way for the sustainable production of traditional Chinese medicine in the context of the carbon peaking and carbon neutrality goals. Facility cultivation and simulative habitat cultivation modes have been developed and applied to develop the endangered Dendrobium huoshanense on the basis of protection. However, the differences in the greenhouse gas emissions and global warming potential of these cultivation modes remain unexplored, which limits the accurate assessment of carbon-friendly ecological cultivation modes of D. huoshanense. Greenhouse gas emission flux monitoring based on the static chamber method provides an effective way to solve this problem. Therefore, this study conducted a field experiment in the facility cultivation and simulative habitat cultivation modes at a D. huoshanense cultivation base in Dabie Mountains, Anhui Province. From April 2023 to March 2024, samples of greenhouse gases were collected every month, and the concentrations of CO_2, CH_4, and N_2O of the samples were then detected by gas chromatography. The greenhouse gas emission fluxes, cumulative emissions, and global warming potential were further calculated, and the following results were obtained.(1)The two cultivation modes of D. huoshanense showed significant differences in greenhouse gas emission fluxes, especially the CO_2 emission flux, with a pattern of facility cultivation>simulative habitat cultivation [(35.60±11.70)mg·m~(-2)·h~(-1) vs(2.10±4.59)mg·m~(-2)·h~(-1)].(2) The annual cumulative CO_2 emission flux in the case of facility cultivation was significantly higher than that of simulative habitat cultivation[(3 077.00±842.00)kg·hm~(-2) vs(221.00±332.00)kg·hm~(-2)], while no significant difference was found in annual cumulative CH_4 and N_2O emission fluxes.(3) The facility cultivation mode had a significantly higher global warming potential than the simulative habitat cultivation mode [(3 053.00±847.00)kg·hm~(-2) vs(196.00±362.00)kg·hm~(-2)]. Overall, the simulative habitat cultivation of D. huoshanense has obvious carbon-friendly characteristics compared with facility cultivation, which is in line with the concept of ecological cultivation of medicinal plants. This study is of great reference significance for the implementation and promotion of the ecological cultivation mode of D. huoshanense under carbon peaking and carbon neutrality goals.
Dendrobium/chemistry* ; Greenhouse Gases/metabolism* ; Carbon/analysis* ; Ecosystem ; Carbon Dioxide/metabolism* ; China ; Global Warming

The Clinical Chemistry Subcommittee of the Korean Association for External Quality Assessment Service conducted external quality assessments in 2015. This included general chemistry and blood gas measurements as part of a scheme of six trials, comprising three samples each. All control materials were included at the same time. The overall response rates were 94.4% for general chemistry and 92.2% for blood gas. The parameters tested included sodium, potassium, chloride, blood urea nitrogen, glucose, calcium, phosphorus, uric acid, creatinine, bilirubin, total protein, albumin, total cholesterol, triglyceride, aspartate aminotransferase (AST), alanine transaminase (ALT), alkaline phosphatase, lactate dehydrogenase, gamma glutamyl transferase, high-density lipoprotein (HDL) cholesterol, and low-density lipoprotein (LDL) cholesterol for general chemistry, and pH, partial pressure of carbon dioxide (pCO₂), and partial pressure of oxygen (pO₂) for blood gas assessments. Two types of reports were generated: a method summary, including mean, standard deviation, and coefficient of variation for each test method; and a result summary of each participating laboratory, including mean, standard deviation, number of peer groups, and standard deviation index and variance index scores of each laboratory. The overall quality performance in 2015 was similar to that of previous years, and showed lower interlaboratory variation than that in 2014. The requisite continual improvement in clinical chemistry testing quality can be achieved through participation in similar proficiency testing programs.
Alanine Transaminase ; Alkaline Phosphatase ; Aspartate Aminotransferases ; Bilirubin ; Blood Urea Nitrogen ; Calcium ; Carbon Dioxide ; Chemistry ; Chemistry, Clinical* ; Cholesterol ; Clinical Chemistry Tests ; Creatinine ; Glucose ; Hydrogen-Ion Concentration ; Korea* ; L-Lactate Dehydrogenase ; Lipoproteins ; Methods ; Oxygen ; Partial Pressure ; Peer Group ; Phosphorus ; Potassium ; Sodium ; Transferases ; Triglycerides ; Uric Acid

BACKGROUND: Point-of-care testing (POCT) is designed to be used near the site where the clinical care is being delivered. The demand for POCT in the medical field is expanding significantly, given that rapid results can eventually lead to early diagnosis and immediate clinical management of diseases. Therefore, the aim of this study was to evaluate the performance of the i-STAT POC analyser (Abbott Diagnostics, USA) for testing 8 chemical analytes (viz., sodium, potassium, chloride, total carbon dioxide, blood urea nitrogen, creatinine, glucose, and ionised calcium) and 2 hematological analytes (hematocrit [HCT], hemoglobin [Hb]). METHODS: The precision and linearity of the 10 analytes were measured according to Clinical and Laboratory Standards Institute (CLSI) EP15-A3 and EP6-A guidelines. Comparisons with a central laboratory hematology analyser, Coulter LH 780 (Beckman Coulter Inc., USA), and a chemical analyser, UniCel DxC 880i (Beckman Coulter Inc.), were performed using 85 patient samples according to CLSI EP9-A3. RESULTS: The coefficient of variation values for the within-run precision and total precision at 3 levels of all analytes were within 5%, except those for low level creatinine. In the aspect of linearity, the correlation coefficient values of all analytes were over 0.975 in the clinically important concentration range. A very high correlation was observed in glucose, blood urea nitrogen and creatinine (R>0.975), high correlation was observed in sodium, potassium, Hct and Hb (R>0.9), and relatively good correlation was observed in chloride and total carbon dioxide (R>0.7) compared to the central laboratory analysers. CONCLUSIONS: i-STAT showed relatively high precision and linearity, and comparable data to that of routine hematology and chemistry analysers. This device was concluded to have potential for providing faster results and relatively acceptable values to clinicians in need of immediate results.
Blood Glucose ; Blood Urea Nitrogen ; Carbon Dioxide ; Chemistry ; Creatinine ; Early Diagnosis ; Glucose ; Hematology ; Humans ; Nitrogen ; Point-of-Care Systems* ; Point-of-Care Testing ; Potassium ; Sodium ; Urea

BACKGROUND: We evaluated the analytical performance of the Abbott i-STAT CHEM8+, a point-of-care testing system that measures 8 basic chemical analytes, namely, sodium, potassium, chloride, total carbon dioxide, BUN, creatinine, glucose, and ionized calcium. METHODS: The precision and linearity of 8 analytes were evaluated according to the CLSI guidelines EP15-A and EP6-A, respectively, using standard material provided by the manufacturer. i-STAT CHEM8+ and other primary methods (e.g. Hitachi Clinical Analyzer 7600 for 7 analytes, Nova CCX for ionized calcium) were also compared according to the CLSI guideline EP9-A2, using 113 patient samples. RESULTS: The standard deviation (SD) of within-run and total precision of 7 analytes except chloride was within the claimed SD or within the verification value. The coefficient of variation of total precision of 7 analytes except creatinine was within 2%. With regard to linearity, all 8 analytes showed first-order equation or at least no statistical difference with the first-order equation. We observed that the efficiency of i-STAT CHEM8+ was comparable to that of primary methods, and that this method has potential applications in the clinical laboratory. CONCLUSIONS: i-STAT CHEM8+ showed good precision and linearity, and an efficiency comparable to that shown by routine chemistry analyzers; thus, it has potential applications in the clinical laboratory. It can provide much faster results and relatively accurate value to clinicians in need of immediate results, such as in an emergency unit or in the intensive care unit.
Calcium ; Carbon Dioxide ; Chemistry* ; Clinical Chemistry Tests ; Creatinine ; Emergency Service, Hospital ; Glucose ; Humans ; Intensive Care Units ; Point-of-Care Systems ; Potassium ; Sodium

BACKGROUND: We evaluated the analytical performance of the Abbott i-STAT CHEM8+, a point-of-care testing system that measures 8 basic chemical analytes, namely, sodium, potassium, chloride, total carbon dioxide, BUN, creatinine, glucose, and ionized calcium. METHODS: The precision and linearity of 8 analytes were evaluated according to the CLSI guidelines EP15-A and EP6-A, respectively, using standard material provided by the manufacturer. i-STAT CHEM8+ and other primary methods (e.g. Hitachi Clinical Analyzer 7600 for 7 analytes, Nova CCX for ionized calcium) were also compared according to the CLSI guideline EP9-A2, using 113 patient samples. RESULTS: The standard deviation (SD) of within-run and total precision of 7 analytes except chloride was within the claimed SD or within the verification value. The coefficient of variation of total precision of 7 analytes except creatinine was within 2%. With regard to linearity, all 8 analytes showed first-order equation or at least no statistical difference with the first-order equation. We observed that the efficiency of i-STAT CHEM8+ was comparable to that of primary methods, and that this method has potential applications in the clinical laboratory. CONCLUSIONS: i-STAT CHEM8+ showed good precision and linearity, and an efficiency comparable to that shown by routine chemistry analyzers; thus, it has potential applications in the clinical laboratory. It can provide much faster results and relatively accurate value to clinicians in need of immediate results, such as in an emergency unit or in the intensive care unit.
Calcium ; Carbon Dioxide ; Chemistry* ; Clinical Chemistry Tests ; Creatinine ; Emergency Service, Hospital ; Glucose ; Humans ; Intensive Care Units ; Point-of-Care Systems ; Potassium ; Sodium

Most main oilfields in China have already entered a "double high" development stage (high water cut, high recovery degree). To further enhance oil recovery in reservoirs after polymer flooding (RAPFs), an efficient activator formulation for promoting metabolism of endogenous microorganism was studied by aerogenic experiments, physical simulation experiments, electron microscopy scanning and pyrophosphate sequencing. Results show that the activator could activate the endogenous microorganisms in the injected water and make the pressurized gas reach 2 MPa after 60 d static culture of the activator in a high pressure vessel. The oil recovery efficiency of natural core physical simulation flooding can be improved by more than 3.0% (OOIP) in RAPFs when injected 0.35 PV activator with 1.8% mass concentration, and a lot of growth and reproduction of activated endogenous microorganism in the core was observed by electron microscopy scanning. Field trial with 1 injector and 4 producers was carried out in the east of south II block of Sa Nan in December 2011. By monitoring four effective production wells, changes of carbon isotope δ13C (PDB) content of methane and carbon dioxide were -45 per thousand to -54 per thousand and 7 per thousand to 12 per thousand. Compared with east II of Sa Nan block, the oil amount increased by 35.9%, water cut stabled at 94%. The incremental oil was 5 957 t during the three and a half years, which provides an alternative approach for further improving oil recovery in similar reservoirs.
Carbon Dioxide ; chemistry ; Carbon Isotopes ; analysis ; China ; Diphosphates ; chemistry ; Methane ; chemistry ; Oil and Gas Fields ; microbiology ; Polymers ; Water ; Water Microbiology

The Clinical Chemistry subcommittee of The Korean Association of External Quality Assessment Service conducted external quality assessments in 2014. This included general chemistry and blood gas measurements as part of a scheme of six trials, comprising of three samples each. All control materials were sent at the same time. The overall response rates were 93.4% for general chemistry and 90.0% for blood gas. The parameters tested included sodium, potassium, chloride, blood urea nitrogen, glucose, calcium, phosphorus, uric acid, creatinine, bilirubin, total protein, albumin, total cholesterol, triglyceride, AST, ALT, alkaline phosphatase, lactate dehydrogenase, gamma glutamyl transferase, HDL cholesterol, and LDL cholesterol for general chemistry and pH, partial pressure of carbon dioxide, and partial pressure of oxygen for blood gas assessment. Two types of reports were generated, namely, a method summary report including mean, standard deviation, and coefficient of variation, for each test method, as well as a result summary report of each participating laboratory, including mean, standard deviation, number of peer groups, and standard deviation index and variance index scores of each laboratory. The overall quality performance in 2014 was similar to that of previous years and as compared to results from 2013, the inter-laboratory variation was lower. The requisite continual improvement in the quality of clinical chemistry testing can be achieved through participation in similar proficiency testing programs.
Alkaline Phosphatase ; Bilirubin ; Blood Urea Nitrogen ; Calcium ; Carbon Dioxide ; Chemistry ; Chemistry, Clinical* ; Cholesterol ; Cholesterol, HDL ; Cholesterol, LDL ; Clinical Chemistry Tests ; Creatinine ; Glucose ; Hydrogen-Ion Concentration ; Korea* ; L-Lactate Dehydrogenase ; Laboratory Proficiency Testing ; Oxygen ; Partial Pressure ; Peer Group ; Phosphorus ; Potassium ; Research Report ; Sodium ; Transferases ; Triglycerides ; Uric Acid

To evaluate the absorptive characteristics of furfural onto biomass charcoals derived from rice husk pyrolysis, we studied the information of the structure and surface chemistry properties of the rice husk charcoals modified by thermal treatment under nitrogen and carbon dioxide flow and adsorption mechanism of furfural. The modified samples are labeled as RH-N2 and RH-CO2. Fresh rice husk charcoal sample (RH-450) and modified samples were characterized by elemental analysis, nitrogen adsorption-desorption isotherms, Fourier-transform infrared spectroscopy and Boehm titration. The results show that fresh rice husk charcoal obtained at 450 degrees C had a large number of organic groups on its surface and poor pore structure. After the modification under nitrogen and carbon dioxide flow, oxygenic organics in rice husk charcoals decompose further, leading to the reduction of acidic functional groups on charcoals surface, and the increase of the pyrone structures of the basic groups. Meanwhile, pore structure was improved significantly and the surface area was increased, especially for the micropores. This resulted in the increase of π-π dispersion between the surfaces of rice husk charcoals and furfural molecular. With making comprehensive consideration of π-π dispersion and pore structure, the best removal efficiency of furfural was obtained by rice husk charcoal modified under carbon dioxide flow.
Adsorption ; Biomass ; Carbon Dioxide ; Charcoal ; Furaldehyde ; chemistry ; Nitrogen ; Oryza ; Spectroscopy, Fourier Transform Infrared ; Surface Properties

Curcumin-ethyl-cellulose (EC) sustained-release composite particles were prepared by using supercritical CO2 anti-solvent technology. With drug loading and yield of inclusion complex as evaluation indexes, on the basis of single factor tests, orthogonal experimental design was used to optimize the preparation process of curcumin-EC sustained-release composite particles. The experiments such as drug loading, yield, particle size distribution, electron microscope analysis (SEM) , infrared spectrum (IR), differential scanning calorimetry (DSC) and in vitro dissolution were used to analyze the optimal process combination. The orthogonal experimental optimization process conditions were set as follows: crystallization temperature 45 degrees C, crystallization pressure 10 MPa, curcumin concentration 8 g x L(-1), solvent flow rate 0.9 mL x min(-1), and CO2 velocity 4 L x min(-1). Under the optimal conditions, the average drug loading and yield of curcumin-EC sustained-release composite particles were 33.01% and 83.97%, and the average particle size of the particles was 20.632 μm. IR and DSC analysis showed that curcumin might complex with EC. The experiments of in vitro dissolution showed that curcumin-EC composite particles had good sustained-release effect. Curcumin-EC sustained-release composite particles can be prepared by supercritical CO2 anti-solvent technology.
Carbon Dioxide ; chemistry ; Cellulose ; administration & dosage ; analogs & derivatives ; chemistry ; Curcumin ; administration & dosage ; chemistry ; Delayed-Action Preparations ; Solubility ; Solvents ; Technology, Pharmaceutical

Homoacetogens are a group of microorganisms with application potential to produce chemicals and biofuels by the bioconversion of synthesis gas. In this study, we collected waste activated sludge samples to screen homoacetogens by Hungate anaerobic technique, and studied the effect of pH on acetate and alcohol production from H2/CO2 gas. The mixed culture contained Clostridium ljungdahlii, Lysinibacillus fusiformis and Bacillus cereus. Acetate concentration achieved 31.69 mmol/L when the initial pH was 7. The mixed culture containing homoacetogen could converting H2/CO2 to acetate, which provides an efficient microbial resource for the bioconversion of synthesis gas.
Acetates ; chemistry ; Bacteria ; classification ; Biofuels ; Carbon Dioxide ; Hydrogen ; Sewage ; microbiology