Neuropathic pain markedly impairs quality of life and imposes a substantial socioeconomic burden, while available treatments often provide only partial relief and are limited by safety concerns. The Neuropathic Pain Special Interest Group of the International Association for the Study of Pain (NeuPSIG-IASP) first published pharmacologic recommendations in 2007, followed by a major update in 2015 and a new guideline in 2025. This narrative review specifically compares the 2015 and 2025 NeuPSIG-IASP guidelines, outlining key methodological changes and therapeutic shifts. The 2025 guideline is based on a larger, more rigorous meta-analysis, maintains α2δ-ligands (adds mirogabalin), serotonin-noradrenaline reuptake inhibitors, and tricyclic antidepressants as first-line drugs, downgrades tramadol into the opioid third-line group. It also introduces high-frequency motor-cortex repetitive transcranial magnetic stimulation as a weakly recommended third-line option and discusses implications for Korean clinical practice.

Background: Hair drying is a routine cosmetic practice; however, excessive heat exposure and non-uniform airflow can compromise cuticle integrity, degrade hair sensory properties, and induce scalp discomfort. This study aimed to (i) identify a practical thermal window that minimizes perturbation of hair fiber surface and quantify late-stage thermal amplification during the drying process using percentage-based analysis. Methods: Temperature-dependent hair fiber surface morphology was examined by scanning electron microscopy (SEM) after controlled exposure to 41°C, 60°C, 80°C, and 90°C using virgin and chemically damaged hair. The drying efficacy was assessed using the surface and internal moisture indices under airflow shaping (test) and uniform airflow (control) conditions. Hair fluttering (maximum angular displacement) was evaluated before and after drying under warm-cool alternating (60°C-80°C) versus constant hot airflow (80°C). Results: SEM revealed temperature-dependent cuticle disruption, with markedly greater surface perturbation at 90°C than at 80°C. Infrared thermography demonstrated pronounced late-stage thermal amplification: at 150 seconds, the surface temperature increased by 295% (from 24.2°C to 72.0°C) at 90°C, compared with 207% (from 24.2°C to 50.7°C) at 80°C. Airflow shaping promoted preferential surface moisture removal (–13.6%) while limiting internal dehydration (–9.4%), whereas the control condition exhibited minimal surface drying (–4.6%) but substantial internal moisture loss (–22.2%). Warm-cool modulation increased hair fluttering by +11.0%, whereas constant hot airflow reduced it (–3.7%). Conclusion These findings indicate that spatial and temporal control of heat delivery represents a clinically relevant design strategy beyond the nominal temperature specification in hair-drying devices.

Background: Epidermal growth factor (EGF) is widely applied in dermatology for its regenerative effects; however, its clinical utility is limited by low stability and high production costs.To overcome these limitations, we developed a novel probiotic-derived epidermal growth factor (pEGF) by engineering Pediococcus pentosaceus CBT SL4 to express and secrete EGF. Objective: To investigate the anti-photoaging effects of topical pEGF in a ultraviolet B (UVB)-irradiated mice by assessing histological and molecular changes related to collagen synthesis, extracellular matrix (ECM) remodeling, oxidative stress, and inflammation. Methods: SKH1 hairless mice were exposed to UVB for twelve weeks to induce photoaging and treated with topical 10% pEGF cream from week 9 to 12. Skin samples were analyzed using dermoscopy, histology, immunohistochemistry, quantitative real-time polymerase chain reaction, western blotting, and proteomics to evaluate morphological and molecular alterations in ECM components and inflammatory markers. Results: Topical pEGF treatment improved skin texture and reduced wrinkles. Histological evaluation revealed that EGF significantly attenuated UVB-induced epidermal thickening and restored collagen density, with the strongest effects observed in the pEGF group. Molecular analysis showed downregulation of matrix metalloproteinases (MMPs; MMP-1, MMP-3), upregulation of collagen (type I collagen, type III collagen) and tissue inhibitors of metalloproteinases (TIMPs; TIMP-1, TIMP-2). Additionally, pEGF reduced pro-inflammatory cytokines (tumor necrosis factor-α, interleukin-1β) and oxidative stress markers. Conclusion pEGF demonstrated potent anti-photoaging effects through ECM restoration, inflammation modulation, and barrier reinforcement. These findings support the therapeutic potential of pEGF as a stable, cost-effective alternative to conventional EGF in dermatological applications.

Over the past two decades, experimental and clinical evidence has established the interleukin-23 (IL-23)/interleukin-17 (IL-17) axis as a key mediator of psoriatic inflammation. IL-23, primarily derived from activated dendritic cells, supports the survival and pathogenic function of type 17 immune cells, which subsequently release IL-17A, IL-17F, and IL-22 to promote keratinocyte activation and recruit inflammatory leukocytes. These mechanistic insights have directly translated into the development of highly effective biologic therapies targeting IL-17 or IL-23, substantially improving the management of psoriasis. Beyond injectable biologics, growing efforts to overcome limitations related to long-term adherence, cost, and accessibility have accelerated the development of non-injectable therapeutic approaches. Oral and topical small-molecule agents, including selective tyrosine kinase 2 (TYK2) inhibitors and IL-23 receptor antagonists, are now broadening the therapeutic options. At the same time, progress in molecular engineering, artificial intelligence–guided protein design, and spatial multi-omic technologies are refining therapeutic discovery and enabling more precise targeting of pathogenic immune circuits. In this review, we outline the current understanding of the IL-23/IL-17 pathway in psoriasis pathogenesis and provide a critical overview of approved and emerging therapies directed at this pathway. We also address key biological and translational challenges, including tissue-specific cytokine functions, interspecies differences, and long-term safety considerations, and discuss how these factors may inform future strategies for precision immunotherapy in psoriasis.

Background: With the aging population and advancements in medical care worldwide, the number of older patients with end-stage kidney disease continues to rise. This study aimed to identify factors associated with osteoporosis and osteopenia in older patients undergoing incident hemodialysis and assess their impact on mortality. Methods: We analyzed a large multicenter retrospective cohort of patients aged ≥70 years undergoing incident hemodialysis to identify factors associated with osteoporosis using logistic regression analysis and to assess the association of death with osteoporosis and osteopenia using Cox multivariable analysis. Results: Among 710 patients, 39.0% and 19.6% had osteoporosis and osteopenia, respectively. Osteoporosis was significantly associated with female sex, a history of fractures, and the absence of phosphate binder use. During a median follow-up of 36.8 months, 348 participants (58.8%) died. Mortality rates were the highest in the osteoporosis group (79.8%), followed by the osteopenia (77.2%) and normal bone mineral density (BMD) groups (35.2%). Cox regression analysis revealed that even after adjusting for covariates, the osteoporosis group was significantly associated with a higher mortality risk than the normal BMD group. Osteoporosis at the start of hemodialysis was significantly associated with higher mortality. Conclusion We should consider the importance of bone health in patients undergoing incident hemodialysis and pay attention to the use of phosphate binders and fracture prevention.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Background: and Purpose Previous research on patients with acute ischemic stroke (AIS) has shown a 0.5% incidence of major gastrointestinal bleeding (GIB) requiring blood transfusion during hospitalization. The existing literature has insufficiently explored the long-term incidence in this population despite the decremental impact of GIB on stroke outcomes. Methods: We analyzed the data from a cohort of patients with AIS admitted to 14 hospitals as part of a nationwide multicenter prospective stroke registry between 2011 and 2013. These patients were followed up for up to 6 years. The occurrence of major GIB events, defined as GIB necessitating at least two units of blood transfusion, was tracked using the National Health Insurance Service claims data. Results: Among 10,818 patients with AIS (male, 59%; mean age, 68±13 years), 947 (8.8%) experienced 1,224 episodes of major GIB over a median follow-up duration of 3.1 years. Remarkably, 20% of 947 patients experienced multiple episodes of major GIB. The incidence peaked in the first month after AIS, reaching 19.2 per 100 person-years, and gradually decreased to approximately one-sixth of this rate by the 2nd year with subsequent stabilization. Multivariable analysis identified the following predictors of major GIB: anemia, estimated glomerular filtration rate <60 mL/min/1.73 m2 , and a 3-month modified Rankin Scale score of ≥4. Conclusion Patients with AIS are susceptible to major GIB, particularly in the first month after the onset of AIS, with the risk decreasing thereafter. Implementing preventive strategies may be important, especially for patients with anemia and impaired renal function at stroke onset and those with a disabling stroke.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Objective: Recently, various mental health promotion programs using virtual reality (VR) technology have been tried in the psychiatric field. Considering the importance of mental health in pregnant women, VR-assisted mental health promotion programs for pregnant women are needed to be developed. This study aimed to prospectively investigate the efficacy of a VR-assisted mental health promotion program for pregnant women. Methods: Fifty-five pregnant women were participated in this study. Mental health states such as depression, anxiety, perceived stress, and quality of life were assessed by Patient Health Questionnaire-9 (PHQ-9), Generalized Anxiety Disorder-7 (GAD-7), Perceived Stress Scale, and World Health Organization Quality of Life Scale Abbreviated Version (WHOQOL-BREF) before and after using VR program treatment. Based on the mental health types of pregnant women classified by cluster analysis, the effects of the VR program were analyzed by paired t test and Wilcoxon signed rank test. Results: The VR program significantly reduced PHQ-9 (p = 0.033) and GAD-7 (p = 0.046) scores, and significantly increased WHOQOL-BREF (p = 0.026) score of the participants. Additionally, when classifying the mental health types of pregnant women, the VR program was significantly effective to improve depression, anxiety, and quality of life in the most severe group based on the cluster analysis. Conclusion The results of this study suggest that VR program may be effective to improve the mental health of pregnant women. Particularly, VR programs for the high-risk group of depression might be the most effective. Therefore, VR-assisted mental health promotion programs could be useful for managing the mental health in pregnant women.