OBJECTIVE

To describe a practical surgical approach for mastoid cavity obliteration and canal wall reconstruction using autologous bone dust and conchal cartilage applied either during primary canal wall up (CWU) surgery or in revision of prior canal wall down (CWD) mastoid cavities, with the aim of restoring a self-cleaning, waterproof ear that retained its natural acoustic resonance.

METHODS

The indications, surgical technique, and follow up and imaging surveillance were described, detailing patient selection, harvesting and application of autologous materials, and the key technical steps for cavity obliteration and posterior canal wall reconstruction. The importance of preserving the ear canal’s standing wave resonance (~2000–2500 Hz) for optimal hearing was emphasized. Postoperative monitoring with non-echo planar diffusion-weighted imaging (DWI) MRI was recommended at least 1.5 years after surgery to detect residual or recurrent cholesteatom.

RESULTS

This technique was performed successfully in 88 patients (32 males and 56 females, aged 6–80 years) across four hospitals in Metro Manila from January 2020 to July 2025. All patients had unremarkable postoperative courses and healed within three months. Among the 67 who underwent DWI MRI after 18 months, two required revision mastoidectomies with mastoid obliteration for cholesteatoma recidivism—one with residual and one with recurrent disease.

CONCLUSION

Mastoid obliteration and reconstruction using autologous bone dust and cartilage has proven to be a safe, effective and cost-efficient technique. It converts problematic open cavities into dry, self-cleaning ears suitable for swimming while preserving the acoustic benefits of a near-normal ear canal. Long-term follow-up with diffusion-weighted imaging (DWI) MRI is essential to ensure durable disease control.

Human ; Mastoidectomy ; Reconstructive Surgical Procedures ; Bone Transplantation ; Cartilage ; Cholesteatoma ; Ear, Middle ; Magnetic Resonance Imaging ; Postoperative Care ; Hearing

OBJECTIVES: To study the clinical effect of the L-shape technique combined with concentrated growth factor on the horizontal bone defects of maxillary anterior teeth. METHODS: Twenty-five implants from 25 patients who underwent single maxillary anterior tooth implantation with simultaneous bone grafting were selected as the study subjects. Based on the bone grafting techniques, the patients were divided into a test group (L-shaped technique with guided bone regeneration combined with concentrated growth factor, 11 cases) and a control group (traditional guided bone regeneration combined with concentrated growth factor, 14 cases). The early discomfort and wound healing conditions in the two groups at two weeks after surgery were compared. The horizontal bone thickness, vertical bone thickness, and grayscale values in the augmentation area were measured immediately postsurgery and six months after surgery. Implant stability, hard tissue resorption within six months, and grayscale values were compared between the two groups. RESULTS: Differences in early discomfort, wound healing, implant stability, and grayscale values between the two groups were not statistically significant (P>0.05). Vertical bone thickness in the test group was significantly better than that in the control group at six months after surgery (P<0.05). The variation in horizontal bone thickness in the test group was significantly higher than that in the control group (P<0.05). CONCLUSIONS The application of the L-shape technique with concentrated growth factor for horizontal bone defects in the anterior maxillary area yielded satisfactory short-term results in terms of bone augmentation, early discomfort, wound healing, and implant stability at six months after surgery.
Humans ; Maxilla/diagnostic imaging* ; Intercellular Signaling Peptides and Proteins/therapeutic use* ; Wound Healing ; Bone Transplantation/methods* ; Dental Implantation, Endosseous/methods* ; Bone Regeneration ; Male ; Female ; Adult ; Dental Implants, Single-Tooth ; Middle Aged

OBJECTIVES: To investigate the clinical application of the digital-assisted reconstruction of the mandible and tumors with free fibula transplantation and immediate implantation via the intraoral approach. METHODS: Twelve patients with benign mandibular tumors were collected. Three-dimensional mandibular reconstruction was performed digitally before surgery to simulate mandibular tumor resection, fibula resection and reconstruction, and implant implantation. The intraoperative resection of the mandibular tumor was conducted through the intraoral approach under the guidance of a guide plate, and fibula resection, molding, reconstruction, and oral fixation were immediately performed. Implant implantation was performed during the second phase of implant surgery and denture restoration was performed 1-2 months after surgery. RESULTS: The types of mandibular defects were BrownⅠ (one case), Ⅰc (four cases), Ⅱ (one case), Ⅱc(three cases), and Ⅲ (three cases). The length of the fibular bone was 12-22 cm. The number of fibular molding amputations was as follows: two cases in two segments, six cases in three segments, three cases in four segments, and one case in five segments. All of these cases underwent folding fibular reconstruction of mandibular and alveolar bone defects. A total of 44 implants were implanted, and none failed after operation. CONCLUSIONS The intraoral approach is a reliable method for the resection of mandibular benign tumors, with few postoperative complications and the ability to position and fix accurately the reconstructed folded fibula under digital design. The immediate implantation of the transplanted fibula does not affect the blood supply and has a high success rate. It is an effective and reliable method for the resection and reconstruction of mandibular benign tumors.
Humans ; Fibula/transplantation* ; Mandibular Neoplasms/surgery* ; Mandibular Reconstruction/methods* ; Bone Transplantation/methods* ; Male ; Middle Aged ; Female ; Mandible/surgery* ; Adult ; Free Tissue Flaps ; Surgery, Computer-Assisted

OBJECTIVES: This study aims to evaluate the short- to medium-term clinical efficacy of demineralized dentin matrix (DDM) particles applied during the immediate implantation of alveolar bone defects in the posterior region. METHODS: A total of 76 patients with 110 simple taper retentive implants were included in the conducted study and divided into Groups A and B in accordance with the bone grafting materials. Cone beam computed tomography and panoramic radiographs were taken immediately after implant surgery, immediate crown repair, and final follow-up time. The average follow-up time for Groups A and B was recorded. The primary observed clinical indicators were overall survival rate of the implant, bone resorption of the mesial and distal margins of the implant, buccal bone width resorption at the platform level and 1 mm below the platform, and bone height of the implant. Implant complication was a secondary observed clinical indicator. RESULTS: During the 1-to-5-year follow-up observation period, the mean follow-up of Group A was 38.2 months while that of Group B was 39.9 months. In Group A, two implants failed, one of which fractured, and implant overall survival rate was 96.4%. Four implants failed in Group B due to peri-implantitis, and implant overall survival rate was 92.6%. No statistically significant difference in implant overall survival rate was found between the two groups (P>0.05). In Group A, the average bone resorption in the mesial and distal margins of the implants was (1.011±2.047) mm and (0.841±2.183) mm, respectively. In Group B, the average bone resorption of the mesial and distal margins of the implants was (1.546±1.778) mm and (1.431±1.909) mm, respectively. No statistically significant difference was noted between the two groups (P>0.05). In Group A, buccal bone width resorption at the platform level and 1 mm below the platform of the implant was (0.782±2.084) mm and (0.681±2.307) mm, respectively. In Group B, buccal bone width resorption at the platform level and 1 mm below the platform of implant was (1.071±1.474) mm and (0.949±1.909) mm, respectively. No statistically significant difference was found between the two groups (P>0.05). In Group A, the buccal bone height of resorption of the implant was (1.044±2.214) mm. In Group B, the buccal bone height of resorption of the implant was (1.075±1.456) mm. No statistically significant difference in bone height was observed between the two groups (P>0.05). CONCLUSIONS During the 1-to-5-year follow-up observation period, DDM particles can effectively increase the height and width of alveolar bone, and they can achieve the same effect of maintaining alveolar bone contour and bone augmentation compared with deproteinized inorganic calf bone. DDM particles can be used as a potential new bone grafting material for the treatment of bone defects in clinical practice.
Humans ; Follow-Up Studies ; Dentin ; Cone-Beam Computed Tomography ; Dental Implants ; Male ; Female ; Adult ; Alveolar Bone Loss/surgery* ; Middle Aged ; Bone Transplantation ; Radiography, Panoramic ; Dental Implantation, Endosseous/methods* ; Immediate Dental Implant Loading

Bone grafting is a primary method for treating bone defects. Among various graft materials, xenogeneic bone substitutes are widely used in clinical practice due to their abundant sources, convenient processing and storage, and avoidance of secondary surgeries. With the advancement of domestic production and the limitations of imported products, an increasing number of bone filling or grafting substitute materials isentering clinical trials. Relevant experts have drafted this consensus to enhance the management of medical device clinical trials, protect the rights of participants, and ensure the scientific and effective execution of trials. It summarizes clinical experience in aspects, such as design principles, participant inclusion/exclusion criteria, observation periods, efficacy evaluation metrics, safety assessment indicators, and quality control, to provide guidance for professionals in the field.
Humans ; Bone Substitutes/therapeutic use* ; Randomized Controlled Trials as Topic/methods* ; Consensus ; Bone Transplantation ; Research Design

In recent years, digital bone harvesting and grafting technology in dental implantology has emerged as a cutting-edge advancement in the field of oral medicine, gaining widespread application in the treatment of complex bone defect cases. By integrating digital imaging, virtual design, and precise surgical guidance, this technology has significantly enhanced the success rate of dental implants and improved patient outcomes. However, the rapid development of this technology has also highlighted the lack of standardized clinical protocols, necessitating the establishment of unified guidelines through expert consensus. This article provides a detailed overview of the development process of the group standard Clinical Protocol for Bone Harvesting and Grafting under Digital Guidance in Oral Implantology and offers an in-depth interpretation of its key components, aiming to serve as a valuable reference for clinical practice and academic research.
Humans ; Bone Transplantation/methods* ; Surgery, Computer-Assisted/methods* ; Dental Implantation/methods* ; Tissue and Organ Harvesting/methods* ; Clinical Protocols

OBJECTIVE: To investigate the effectiveness of posterior lateral perforator flap in lower limb combined with free fibula for maxillary tissue defect repair. METHODS: Between December 2018 and December 2023, 16 patients with the maxillary malignant tumors were admitted. There were 10 males and 6 females, with an average age of 64.3 years (range, 54-75 years). There were 7 cases of maxillary gingival cancer, 5 cases of hard palate cancer, and 4 cases of maxillary sinus cancer. According to the 2017 American Joint Committee on Cancer (AJCC) TNM stage, there were 8 cases of stage Ⅲ, 6 cases of stage Ⅳa, and 2 cases of stage Ⅳb. After resection of the lesion, the remaining maxillary defects were classified into class Ⅱa in 3 cases, class Ⅱb in 5 cases, and class Ⅲb in 8 cases according to Brown's classification. The size of soft tissue defects ranged from 4 cm×3 cm to 8 cm×6 cm. The posterior lateral perforator flap in lower limb in size of 5 cm×4 cm-9 cm×7 cm were harvested to repair soft tissue defects, and free fibula in length of 6-11 cm were used to repair bone defects. The donor sites of the lower limb were sutured directly (6 cases) or repaired with free skin grafting (10 cases). Six patients with positive lymph node pathology were treated with radiotherapy after operation. At 6 and 12 months after operation, the self-assessment was performed by the University of Washington Quality of Survival Questionnaire Form (QUW-4) in five dimensions (facial appearance, swallowing function, chewing function, speech function, and mouth opening), and swallowing function was evaluated by using the Kubota water swallowing test. RESULTS: Postoperative pathological examination showed that all patients were squamous cell carcinoma. One patient who was treated with radiotherapy developed osteomyelitis and 1 patient developed venous crisis of skin flap. The rest of the flaps and all skin grafts survived, and the wounds healed by first intention. All patients were followed up 1-5 years (mean, 2.8 years). Two patients died of local recurrence of the tumor at the 4th and 5th years after operation, respectively. Except for the chewing function score and total score at 6 months after operation, which showed significant differences compared to preoperative scores ( P<0.05), there was no significant difference in other QUW-4 scale scores between different time points ( P>0.05). The patients' swallowing function evaluated by Kubota water swallowing test reached normal in 4 cases, suspicious in 9 cases, and abnormal in 3 cases at 6 months after operation, and 10, 6, and 0 cases at 12 months after operation, respectively. The swallowing function at 12 months was significantly better than that at 6 months ( Z=-2.382, P=0.017). CONCLUSION The posterior lateral perforator flap in the lower limb combined with free fibula to repair maxillary tissue defects can repair soft and hard tissue defects at the same time, so that the patient's facial appearance, swallowing function, chewing function, speech function, and mouth opening are satisfactorily restored and the mid-term effectiveness is good.
Humans ; Middle Aged ; Male ; Female ; Fibula/surgery* ; Aged ; Perforator Flap ; Plastic Surgery Procedures/methods* ; Maxilla/surgery* ; Maxillary Neoplasms/surgery* ; Free Tissue Flaps/transplantation* ; Lower Extremity/surgery* ; Bone Transplantation/methods* ; Treatment Outcome

OBJECTIVE: To investigate the short-term effectiveness of the anterior and middle columns in thoracolumbar tuberculosis reconstructed with whole autogenous spinous process-laminar bone through posterior approach. METHODS: The retrospective study included 78 patients with thoracolumbar tuberculosis who underwent posterior approach surgery and anterior and middle column bone graft reconstruction between January 2012 and May 2023. Based on the type of autogenous bone graft used, patients were divided into group A (whole autogenous spinous process-laminar bone graft, 38 cases) and group B (autogenous structural iliac bone graft, 40 cases). There was no significant difference of baseline data, such as age, gender, disease duration, involved segment of spinal tuberculosis, and preoperative erythrocyte sedimentation rate (ESR), C reactive protein (CRP), Oswestry disability index (ODI), visual analogue scale (VAS) score, the American Spinal Injury Association (ASIA) grade, segmental kyphotic angle, and intervertebral height between the two groups ( P>0.05). The operation time, intraoperative blood loss, postoperative drainage, hospital stays, ESR, CRP, VAS score, ODI, bone fusion time, ASIA grade for neurological status valuation, postoperative complications, change of segmental kyphotic angle, change of intervertebral height were recorded and compared between the two groups. RESULTS: The operation time in group A was significantly shorter than that in group B ( P<0.05); there was no significant difference in intraoperative blood loss, postoperative drainage, and hospital stays between the two groups ( P>0.05). All patients in the two groups were followed up 14-110 months (mean, 64.1 months); there was no significant difference in the follow-up time between the two groups ( P>0.05). The ESR, CRP, ODI, and VAS score at each time point after operation in both groups significantly improved when compared with those before operation, and further improved with the extension of time, the differences were significant ( P<0.05). There was no significant difference between the two groups ( P>0.05) except that the VAS score of group A was significantly better than that of group B at 3 days after operation ( P<0.05). There was no significant difference in fusion time between the two groups ( P>0.05). The neurological function of most patients improved after operation, and there was no significant difference in ASIA grade between the two groups at last follow-up ( P>0.05). There was no significant difference in segmental kyphosis angle and intervertebral height between the two groups at each time point ( P>0.05), and no significant difference in segmental kyphosis angle, intervertebral height correction and loss were found between the two groups ( P>0.05). In group A, there was 1 case of incision fat liquefaction and 1 case of incision infection; in group B, there was 1 case of deep venous thrombosis, 2 cases of pleural effusion, and 10 cases of pain in bone harvesting area; in both groups, there were 2 cases of gout caused by hyperuricemia. There was a significant difference in the incidence of pain in bone harvesting area between the two groups ( P<0.05), and there was no significant difference in the incidence of other complications between the two groups ( P>0.05). CONCLUSION Whole autogenous spinous process-laminar bone grafting is equivalent to structural iliac bone graft in reconstruction of the anterior and middle columns in thoracolumbar tuberculosis through posterior approach, effectively supporting the stability of the anterior and middle columns of the spine, while resulting in shorter operation time and less postoperative pain in bone harvesting area.
Humans ; Tuberculosis, Spinal/surgery* ; Thoracic Vertebrae/surgery* ; Lumbar Vertebrae/surgery* ; Bone Transplantation/methods* ; Retrospective Studies ; Male ; Female ; Treatment Outcome ; Plastic Surgery Procedures/methods* ; Adult ; Middle Aged ; Transplantation, Autologous ; Operative Time ; Ilium/transplantation*

OBJECTIVE: To investigate the efficacy of minimally invasive osteotomy with preservation of blood supply to the transversely transported bone segment in the treatment of chronic ischemic lower limb diseases using tibial transverse bone transport. METHODS: A retrospective analysis was conducted on the clinical data of 12 patients with chronic ischemic lower limb diseases who met the selection criteria and were treated between June 2016 and December 2023. The cohort included 7 males and 5 females, aged 26-87 years (mean, 61.2 years). Among them, 7 patients had diabetic foot (DF), including 2 cases complicated by arteriosclerosis obliterans (ASO), with a DF duration ranging from 1.7 to 23.0 months (mean, 9.6 months) and ulcer sizes ranging from 3.2 cm×2.4 cm to 10.0 cm×6.6 cm. Three patients had ASO with a disease duration of 1.7-23.0 months (mean, 10.4 months) and ulcer or post-amputation wound sizes ranging from 2.2 cm×2.1 cm to 12.0 cm×7.7 cm. Additionally, 2 patients with thromboangiitis obliterans (TAO) had a disease duration of 7 and 12 months, respectively. Preoperatively, the mean foot skin temperature was (27.63±0.34)℃, and the visual analogue scale (VAS) score was 8.5±0.7. All patients underwent tibial transverse bone transport using minimally invasive osteotomy while preserving the blood supply to the transported bone segment. Postoperative complications and foot ulcer healing were observed. The effectiveness of tibial transverse bone transport was evaluated by comparing preoperative and postoperative foot skin temperature, VAS scores, as well as through CT angiography (CTA). RESULTS: One DF patient with ASO was lost to follow-up, while the remaining 11 patients were followed up 10-29 months (mean, 20.5 months). One DF patient had a displaced fracture at the site of tibial transport due to trauma, which healed after plaster immobilization; 1 DF patient had a small amount of pigmentation in the skin of the donor site, but the blood circulation was good; no complication such as pin tract infection, skin necrosis, or osteomyelitis occurred in the donor site of all patients. At 2-3 weeks postoperatively, the foot skin temperature was (34.21±0.65)℃, and the VAS score was 0.3±0.1, both significantly improved compared to preoperative ones ( t=-31.578, P<0.001; t=49.000, P<0.001). Two TAO patients experienced recurrent, persistent, intolerable pain at 7-10 days postoperatively, with no reduction in ulcer size or necrotic areas; 1 underwent toe amputation, and the other required a mid-leg amputation. The remaining patients achieved complete ulcer healing, with healing time ranging from 5.1 to 9.2 weeks (mean, 6.8 weeks). CTA showed no new vascular occlusions or embolisms. X-ray films at 4 months postoperatively demonstrated proper repositioning and good healing of the transported tibial bone segment. CONCLUSION The application of minimally invasive osteotomy with preserved blood supply to the transversely transported bone segment in tibial transverse bone transport for the treatment of chronic ischemic lower limb diseases effectively minimizes extensive soft tissue dissection, reduces surgical soft tissue damage, and better maintains local blood supply. This approach lowers the risk of postoperative infection and skin necrosis while accelerating postoperative recovery.
Humans ; Osteotomy/methods* ; Middle Aged ; Male ; Female ; Aged ; Tibia/surgery* ; Minimally Invasive Surgical Procedures/methods* ; Retrospective Studies ; Adult ; Bone Transplantation/methods* ; Aged, 80 and over ; Diabetic Foot/surgery* ; Treatment Outcome ; Arteriosclerosis Obliterans/surgery* ; Ischemia/surgery* ; Lower Extremity/blood supply*

OBJECTIVE: To review and summarize the research progress on repairing segmental bone defects using three-dimensional (3D)-printed bone scaffolds combined with vascularized tissue flaps in recent years. METHODS: Relevant literature was reviewed to summarize the application of 3D printing technology in artificial bone scaffolds made from different biomaterials, as well as methods for repairing segmental bone defects by combining these scaffolds with various vascularized tissue flaps. RESULTS: The combination of 3D-printed artificial bone scaffolds with different vascularized tissue flaps has provided new strategies for repairing segmental bone defects. 3D-printed artificial bone scaffolds include 3D-printed polymer scaffolds, bio-ceramic scaffolds, and metal scaffolds. When these scaffolds of different materials are combined with vascularized tissue flaps ( e.g., omental flaps, fascial flaps, periosteal flaps, muscular flaps, and bone flaps), they provide blood supply to the inorganic artificial bone scaffolds. After implantation into the defect site, the scaffolds not only achieve structural filling and mechanical support for the bone defect area, but also promote osteogenesis and vascular regeneration. Additionally, the mechanical properties, porous structure, and biocompatibility of the 3D-printed scaffold materials are key factors influencing their osteogenic efficiency. Furthermore, loading the scaffolds with active components such as osteogenic cells and growth factors can synergistically enhance bone defect healing and vascularization processes. CONCLUSION The repair of segmental bone defects using 3D-printed artificial bone scaffolds combined with vascularized tissue flap transplantation integrates material science technologies with surgical therapeutic approaches, which will significantly improve the clinical treatment outcomes of segmental bone defect repair.
Printing, Three-Dimensional ; Tissue Scaffolds ; Humans ; Surgical Flaps/blood supply* ; Tissue Engineering/methods* ; Plastic Surgery Procedures/methods* ; Bone and Bones/surgery* ; Biocompatible Materials ; Bone Regeneration ; Bone Transplantation/methods* ; Bone Substitutes ; Osteogenesis