ObjectiveTo delineate imaging findings using an imaging platform and investigate the correlation between MRI characteristics of spinal cord atrophy and clinical diagnosis in children with spinal cord injury (SCI). MethodsImaging data of 150 children with SCI admitted to Beijing Bo'ai Hospital, China Rehabilitation Research Center, from January, 2002 to March, 2024 were collected and imported into the imaging platform. The anteroposterior and transverse diameters of the middle part of the spinal cord at the cross-section with the most severe atrophy were measured, and the relevant indicators of the previous normal spinal cord segment were measured as controls; the radiomic features were extracted. Clinical data of the children including gender, age, cause of injury, sensory level, motor level, spinal cord injury level, injury severity and disease course were collected. ResultsSpinal cord atrophy was identified in 81 cases (54%), among which 78 cases (96%) were American Spinal Injury Association Impairment Scale (AIS) grade A and 3 cases (4%) were AIS grade C. The upper boundary of the spinal cord atrophy site strongly correlated with the injury level, motor level and sensory level (r > 0.8, P < 0.001). ConclusionMore than half of children with SCI may develop secondary spinal cord atrophy, the vast majority of whom suffer from complete spinal cord injury; the upper boundary of spinal cord atrophy is correlated with the injury level.

Background/Aims: Regorafenib is recommended by guidelines and trials as a sequential second-line therapy following progression on first-line sorafenib or lenvatinib in hepatocellular carcinoma (HCC). However, efficacy is limited, highlighting the urgent need to screen suitable patients and develop sensitization strategies. Methods: Acquired sorafenib- or lenvatinib-resistant (SR or LR) HCC cell lines and organoids were established. Genome-wide CRISPR library screen was performed in SR or LR cell strains to identify synthetic lethal targets of regorafenib. RNA-seq and FITC-regorafenib efflux assay were used to elucidate ERBB3-driven downstream signaling. Preclinical mouse models of cell line- and patient-derived xenografts and clinical cohorts of HCC patients were employed to validate the efficacy of ERBB3-guided patient stratification. Results: Screening with CRISPR library, we showed that inhibition of ERBB3 was synthetic lethal with regorafenib in SR or LR cell strains and organoids. Mechanistically, SR or LR triggered feedback activation of ERBB3 signaling and mediated regorafenib efflux via ERBB3-HIF1A-ABCB1 cascade pathway, limiting sensitivity to regorafenib. Moreover, ERBB3-low tumors following SR or LR exhibited significant sensitivity to regorafenib, suggesting its potential as a predictive biomarker to screen optimal candidates for sequential therapy. Seribantumab, an ERBB3-targeting monoclonal antibody, inhibited ERBB3-HIF1A-ABCB1 cascade, and its combination with regorafenib exerted marked synergistic anti-tumor effects on ERBB3-high tumors resistant to sorafenib or lenvatinib both in vitro and in vivo. Conclusions This study revealed that ERBB3 was a key resistance factor driving limited efficacy to sequential regorafenib, but also an effective therapeutic target whose inhibition enhanced regorafenib sensitivity after SR or LR.

This paper systematically analyzes schistosomiasis transmission risks during the elimination stage and reviews the evolution of the schistosomiasis surveillance system in China from a One Health perspective, with a special emphasis on schistosomiasis surveillance and response practices during the elimination stage from a One Health perspective. These practices include precise screening of human schistosomiasis under low-endemicity conditions, systematic monitoring of schistosomiasis in domestic and wild animals, ecological management of Oncomelania snails, and information-coordinated responses. Nevertheless, the current surveillance and response system for schistosomiasis suffers from challenges of insufficient cross-sectoral coordination and complex external environments, which constrain precise schistosomiasis surveillance and response in China. Therefore, it is urgently necessary to integrate coordination mechanisms, empower the surveillance system with technological innovation, improve capacity building, and actively promote diverse social participation in the One Health framework, so as to consolidate current schistosomiasis control achievements and achieve the target for schistosomiasis elimination across China, which may provide a replicable technical model for global zoonoses control.

Tissue repair requires the reconstruction of functional vascular networks to restore oxygen and nutrient delivery, eliminate metabolic waste, and maintain tissue homeostasis. Although biochemical factors such as growth factors and cytokines have been extensively studied in vascular regeneration, increasing evidence indicates that mechanical signals from the extracellular matrix (ECM) are equally important regulators of angiogenesis. Matrix stiffness, as a major biomechanical property of the tissue microenvironment, provides critical information that influences endothelial cell (EC) behavior and vascular remodeling through mechanotransduction. However, the biological effects of matrix stiffness are not universally defined as either pro- or anti-angiogenic, but are highly dependent on tissue context, cellular composition, disease progression, and the dynamic changes occurring during tissue repair. Therefore, understanding how matrix stiffness regulates vascular regeneration is essential for developing more precise strategies for tissue engineering and regenerative medicine. In this review, we summarize recent advances in the regulation of angiogenesis by matrix stiffness during tissue repair from multiple perspectives. First, we discuss the direct effects of matrix stiffness on EC behaviors, including differentiation, morphological remodeling, migration, proliferation, barrier maintenance, and vascular network formation. ECs sense mechanical alterations in the surrounding matrix through various mechanosensitive structures, including integrins, focal adhesion complexes, and mechanosensitive ion channels such as Piezo1 and TRPV proteins. These mechanical signals are subsequently transmitted through intracellular pathways involving FAK, RhoA/ROCK, MAPK, and Hippo-YAP/TAZ signaling, leading to cytoskeletal reorganization and transcriptional regulation. Through these mechanisms, matrix stiffness regulates endothelial functional states and determines the balance between regenerative vascular formation and pathological vascular remodeling. Beyond the direct regulation of ECs, we further highlight the importance of stiffness-mediated intercellular communication within the regenerative microenvironment. Matrix stiffness can regulate the behavior and secretory profiles of vascular-associated cells, including mesenchymal stem cells and macrophages, thereby indirectly affecting endothelial function through paracrine mechanisms. Changes in matrix mechanics influence the secretion of angiogenic factors, inflammatory cytokines, and extracellular vesicles from these cells, creating a mechanical regulation network that coordinates vascular regeneration. This perspective extends the traditional concept of matrix stiffness from a physical support structure to an active regulatory signal that integrates multiple cellular responses during tissue repair. Furthermore, we discuss the tissue-specific effects of matrix stiffness in vascular regeneration across different organs, including the aorta, lung, liver, and heart. Although excessive matrix stiffening is frequently associated with fibrosis and vascular dysfunction, the consequences of mechanical changes vary considerably among tissues. Moderate stiffness alterations may support endothelial activation and vascular stabilization in certain regenerative contexts, whereas persistent pathological stiffening can promote inflammation, endothelial dysfunction, and impaired vascular repair. These findings emphasize that the biological meaning of “soft” and “stiff” microenvironments should be interpreted according to specific tissue and experimental conditions rather than as universal mechanical classifications. Finally, we summarize current challenges and future perspectives in this field. A major limitation is the lack of standardized mechanical characterization among different studies, as stiffness measurements are influenced by material properties, testing methods, and experimental conditions, limiting direct comparison across research systems. Moreover, most existing models fail to fully reproduce the dynamic and viscoelastic properties of native ECM during tissue regeneration. Future studies should combine advanced biomaterials with standardized mechanical analysis, organoid models, and multi-omics approaches to establish more accurate mechanical regulatory maps. Overall, this review proposes that matrix stiffness is not merely a structural feature of tissues, but an active biological signal that regulates vascular regeneration through coordinated mechanotransduction and multicellular interactions. A deeper understanding of stiffness-mediated vascular regulation will provide new theoretical insights and therapeutic opportunities for improving tissue repair outcomes.

Objective: Previous studies have discovered a correlation between cigarette smoking and cortical thickness and surface area, but the causal relationship remains unclear. The objective of this investigation is to scrutinize the causal association between them. Methods: To derive summary statistics from a genome-wide association study (GWAS) on cortical thickness, surface area, and four smoking behaviors: 1) age of initiation of regular smoking (AgeSmk); 2) smoking initiation (SmkInit); 3) smoking cessation (SmkCes); 4) cigarettes per day (CigDay). Linkage disequilibrium score regression (LDSC) was employed to examine genetic association analysis. Furthermore, for traits with significant genetic associations, Mendelian randomization (MR) analyses were conducted. Results: The LDSC analysis revealed nominal genetic correlations between AgeSmk and right precentral surface area, left caudal anterior cingulate surface area, left cuneus surface area, left inferior parietal surface area, and right caudal anterior cingulate thickness, as well as between CigDay and left caudal middle frontal surface area, between SmkCes and left entorhinal thickness, and between SmkInit and left rostral anterior cingulate surface area, right rostral anterior cingulate thickness, and right superior frontal thickness (rg=-0.36–0.29, p<0.05). MR analysis showed a unidirectional causal association between left caudal middle frontal surface area and CigDay (βIVW=0.056, pBonferroni=2×10-4). Conclusion Left caudal middle frontal surface area has the potential to serve as a significant predictor of smoking behavior.

Objective: To systematically analyze the revisions content and technological development trends of microbiological standards in the Chinese Pharmacopoeia (ChP) 2025 Edition, and explore its novel requirements in risk-based pharmaceutical product lifecycle management.
Methods: A comprehensive review was conducted on 26 microbiological-related standards to summarize the revision directions and scientific implications from perspectives including the revision overview, international harmonization of microbiological standards, risk-based quality management system, and novel tools and methods with Chinese characteristics.
Results: The ChP 2025 edition demonstrates three prominent features in microbiological-related standards: enhanced international harmonization, introduced emerging molecular biological technologies, and established a risk-based microbiological quality control system.
Conclusion: The new edition of the Pharmacopoeia has systematically constructed a microbiological standard system, which significantly improves the scientificity, standardization and applicability of the standards, providing a crucial support for advancing the microbiological quality control in pharmaceutical industries of China.

The phase changes and quantity-quality transfer of 17 batches of Ostreae Concha(Ostrea rivularis) during the raw material-calcined decoction pieces-standard decoction process were analyzed. The content of calcium carbonate(CaCO_3), the main component, was determined by chemical titration, and the extract yield and transfer rate were calculated. The CaCO_3 content in the raw material, calcined decoction pieces, and standard decoction was 94.39%-98.80%, 95.03%-99.22%, and 84.58%-90.47%, respectively. The process of raw material to calcined decoction pieces showed the yield range of 96.85% to 98.55% and the CaCO_3 transfer rate range of 96.92% to 99.27%. The process of calcined decoction pieces to standard decoction showed the extract yield range of 2.86% to 5.48% and the CaCO_3 transfer rate range of 2.59% to 5.13%. The results of X-ray fluorescence(XRF) assay showed that the raw material, calcined decoction pieces, and standard decoction mainly contained Ca, Na, Mg, Si, Br, Cl, Al, Fe, Cr, Mn, and K. The chemometric results showed an increase in the relative content of Cr, Fe, and Si from raw material to calcined decoction pieces and an increase in the relative content of Mg, Al, Br, K, Cl, and Na from calcined decoction pieces to standard decoction. X-ray diffraction(XRD) was employed to establish XRD characteristic patterns of the raw material, calcined decoction pieces, and standard decoction. The XRD results showed that the main phase of all three was calcite, and no transformation of crystalline form or generation of new phase was observed. Fourier transform infrared spectroscopy(FTIR) was employed to establish the FTIR characteristic spectra of the raw material, calcined decoction pieces, and standard decoction. The FTIR results showed that the raw material had internal vibrations of O-H, C-H, C=O, C-O, and CO■ groups. Due to the loss of organic matter components after calcination, no information about the vibrations of C-H, C=O, and C-O groups was observed in the spectra of calcined decoction pieces and standard decoction. In summary, this study elucidated the quantity-quality transfer and phase changes in the raw material-calcined decoction pieces-standard decoction process by determining the CaCO_3 content, calculating the extract yield and transfer rate, and comparing the element changes, FTIR characteristic spectra, and XRD characteristic pattern. The results were reasonable and reliable, laying a foundation for the subsequent process research and quality control of the formula granules of calcined Ostreae Concha(O. rivularis Gould), and providing ideas and methods for the quality control of the whole process of raw material-decoction pieces-standard decoction-formula granules of Ostreae Concha and other testacean traditional Chinese medicine.
Drugs, Chinese Herbal/isolation & purification* ; Calcium Carbonate/analysis* ; Quality Control