Objective To compare the effects of 20 mg qd and 10 mg bidadministration of iprrazole enteric-coated tablets on the control of gastric acid in healthy subjects.Methods A randomized,single-center,parallel controlled trial was designed to include 8 healthy subjects.Randomly divided into 2 groups,20 mg qd administration group:20 mg enteric-coated tablets of iprrazole in the morning;10 mg bid administration group:10 mg enteric-coated tablets of iprrazole in the morning and 10 mg in the evening.The pH values in the stomach of the subjects before and 24 h after administration were monitored by pH meter.The plasma concentration of iprazole after administration was determined by HPLC-MS/MS.The main pharmacokinetic parameters were calculated by Phoenix WinNonlin(V8.0)software.Results The PK parameters of iprrazole enteric-coated tablets and reference preparations in fasting group were as follows:The Cmax of 20 mg qd group and 10 mg bid group were(595.75±131.15)and(283.50±96.98)ng·mL-1;AUC0-t were(5 531.94±784.35)and(4 686.67±898.23)h·ng·mL-1;AUC0-∞ were(6 003.19±538.59)and(7 361.48±1 816.77)h·ng·mL-1,respectively.The mean time percentage of gastric pH＞3 after 20 mg qd and 10 mg bid were 82.64％and 61.92％,and the median gastric pH within 24 h were 6.25±1.49 and 3.53±2.05,respectively.The mean gastric pH values within 24 h were 5.71±1.36 and 4.23±1.45,respectively.The correlation analysis of pharmacokinetic/pharmacodynamics showed that there was no significant correlation between the peak concentration of drug in plasma and the inhibitory effect of acid.Conclusion Compared with the 20 mg qd group and the 10 mg bid group,the acid inhibition effect is better,the administration times are less,and the safety of the two administration regimes is good.

Objective:To investigate the effects of Xiongcan Yishen Formula(XYF)on ferroptosis in mouse TM3 Leydig cells after oxidative stress injury(OSI)induced by H2O2.Methods:An oxidative stress injury model was established in mouse TM3 Leydig cells using H2O2 induction.The modeled TM3 cells were randomly divided into OSI group,XYF group,the ferroptosis inhibitor Ferrostatin-1(F-1)group,and F-1+XYF group,which were respectively intervened with blank serum,20%drug-containing serum,2μmol/L F-1,and2μmol/L F-1+20%drug-containing serum.A control group(normal TM3 cells+blank serum)was also set up.The morphology of cells in each group was observed,and the levels of testosterone,superoxide dismutase(SOD),reactive oxygen spe-cies(ROS),malondialdehyde(MDA),ferritin heavy chain 1(FTH1),solute carrier family 7 member 11(SLC7A11),glutathione(GSH),glutathione peroxidase 4(GPX4),fatty acid CoA ligase 4(FACL4),total iron ions,and ferrous ions were detected.Re-sults:Compared with the model group,the control group showed significantly decreased expression of ROS,MDA,FACL4,total iron,and ferrous ions(P<0.05),and significantly increased levels of testosterone,SOD,GSH,FTH1,SLC7A11,and GPX4(P<0.05).The male silkworm kidney-tonifying formula group significantly promoted testosterone secretion by TM3 cells and upregulated the expression of FTH1,SLC7A11,GPX4,GSH,and SOD in TM3 cells(P<0.05),while significantly downregulating ROS,MDA,FACL4,total iron ions,and ferrous ions(P<0.05).Conclusion:Following H2O2 exposure,oxidative stress can induce ferroptosis in mouse TM3 Leydig cells.XYF can antagonize OSI and ferroptosis in TM3 cells by activating the SLC7A11/GSH/GPX4 axis,which may underlie the mechanism of XYF in the treatment of male late-onset hypogonadism.

The pharmaceutical manufacturing model is gradually changing from intermittent manufacturing to continuous manufacturing and intelligent manufacturing. This paper briefly reviewed the supervision and research progress in continuous pharmaceutical manufacturing in China and abroad and described the definition and advantages of continuous pharmaceutical manufacturing. The continuous manufacturing of traditional Chinese medicine(TCM) at the current stage was summarized in the following three terms: the enhancement of the continuity of intermittent manufacturing operations, the integration of continuous equipment to improve physical continuity between units, and the application of advanced process control strategies to improve process continuity. To achieve continuous manufacturing of TCM, the corresponding key technologies, such as material property characterization, process modeling and simulation, process analysis technology, and system integration, were analyzed from the process and equipment, respectively. It was proposed that the continuous manufacturing equipment system should have the characteristics of high speed, high response, and high reliability, "three high(H~3)" for short. Considering the characteristics and current situation of TCM manufacturing, based on the two dimensions of product quality control and production efficiency, a maturity assessment model for continuous manufacturing of TCM, consisting of operation continuity, equipment continuity, process continuity, and quality control continuity, was proposed to provide references for the application of continuous manufacturing technology for TCM. The implementation of continuous manufacturing or the application of key continuous manufacturing technologies in TCM can help to systematically integrate advanced pharmaceutical technology elements and promote the uniformity of TCM quality and the improvement of production efficiency.
Medicine, Chinese Traditional ; Reproducibility of Results ; China ; Quality Control ; Pharmaceutical Preparations

In this paper, 50 batches of representative traditional Chinese medicine tablets were selected and the disintegration time was examined with the method in Chinese Pharmacopoeia. The disintegration time and disintegration phenomenon were recorded, and the dissolution behaviors of water-soluble and ultraviolet-absorbent components during the disintegration process of tablets were characterized by self-control method. The results revealed that coating type and raw material type influenced the disintegration time of tablets. It was found that only 4% of traditional Chinese medicine tablets had obvious fragmentation during the disintegration process, while 96% of traditional Chinese medicine tablets showed gradual dissolution or dispersion. Furthermore, according to the disintegration speed, disintegration phenomenon, and whether the cumulative dissolution of measured components was > 90% at complete disintegration, a disintegration behavior classification system(DBCS) was created for the regular-release traditional Chinese medicine tablets. As a result, the disintegration behaviors of 50 batches of traditional Chinese medicine tablets were classified into four categories, i.e. ⅠA_2, ⅠB_1, ⅡB_1, and ⅡB_2. traditional Chinese medicine tablets(Class I) with disintegration time ≤ 30 min were defined to be rapid in disintegration, which can be the objective of optimization or improvement of Chinese herbal extract(semi extract) tablets. Different drug release models were used to fit the dissolution curve of traditional Chinese medicine tablets with gradual dissolution or dispersion phenomenon(i.e. Type B tablets). The results showed that the dissolution curves of water-soluble components in the disintegration process conformed to the zero order kinetics and the Ritger-Peppas model. It could be inferred that the disintegration mechanisms of type B tablets were a combination of dissolution controlled and swelling controlled mechanisms. This study contributes to understanding the disintegration behavior of traditional Chinese medicine tablets, and provides a reference for the design and improvement of disintegration performance of traditional Chinese medicine tablets.
Commerce ; Medicine, Chinese Traditional ; Tablets ; Water ; Drug Compounding

In the new stage for intelligent manufacturing of traditional Chinese medicine(TCM) from pilot demonstration to in-depth application and comprehensive promotion, how to raise the degree of intelligence for the process quality control system has become the bottleneck of the development of TCM production process control technology. This article has sorted out 226 TCM intelligent manufacturing projects that have been approved by the national and provincial governments since the implementation of the "Made in China 2025" plan and 145 related pharmaceutical enterprises. Then, the patents applied by these pharmaceutical enterprises were thoroughly retrieved, and 135 patents in terms of intelligent quality control technology in the production process were found. The technical details about intelligent quality control at both the unit levels such as cultivation, processing of crude herbs, preparation pretreatment, pharmaceutical preparations, and the production workshop level were reviewed from three aspects, i.e., intelligent quality sensing, intelligent process cognition, and intelligent process control. The results showed that intelligent quality control technologies have been preliminarily applied to the whole process of TCM production. The intelligence control of the extraction and concentration processes and the intelligent sensing of critical quality attributes are currently the focus of pharmaceutical enterprises. However, there is a lack of process cognitive patent technology for the TCM manufacturing process, which fails to meet the requirements of closed-loop integration of intelligent sensing and intelligent control technologies. It is suggested that in the future, with the help of artificial intelligence and machine learning methods, the process cognitive bottleneck of TCM production can be overcome, and the holistic quality formation mechanisms of TCM products can be elucidated. Moreover, key technologies for system integration and intelligent equipment are expected to be innovated and accelerated to enhance the quality uniformity and manufacturing reliability of TCM.
Artificial Intelligence ; Medicine, Chinese Traditional ; Reproducibility of Results ; Quality Control ; Intelligence ; Pharmaceutical Preparations

OBJECTIVES: To explore the cytotoxicity of four wild mushrooms involved in a case of Yunnan sudden unexplained death (YNSUD), to provide the experimental basis for prevention and treatment of YNSUD. METHODS: Four kinds of wild mushrooms that were eaten by family members in this YNSUD incident were collected and identified by expert identification and gene sequencing. Raw extracts from four wild mushrooms were extracted by ultrasonic extraction to intervene HEK293 cells, and the mushrooms with obvious cytotoxicity were screened by Cell Counting Kit-8 (CCK-8). The selected wild mushrooms were prepared into three kinds of extracts, which were raw, boiled, and boiled followed by enzymolysis. HEK293 cells were intervened with these three extracts at different concentrations. The cytotoxicity was detected by CCK-8 combined with lactate dehydrogenase (LDH) Assay Kit, and the morphological changes of HEK293 cells were observed under an inverted phase contrast microscope. RESULTS: Species identification indicated that the four wild mushrooms were Butyriboletus roseoflavus, Boletus edulis, Russula virescens and Amanita manginiana. Cytotoxicity was found only in Amanita manginiana. The raw extracts showed cytotoxicity at the mass concentration of 0.1 mg/mL, while the boiled extracts and the boiled followed by enzymolysis extracts showed obvious cytotoxicity at the mass concentration of 0.4 mg/mL and 0.7 mg/mL, respectively. In addition to the obvious decrease in the number of HEK293 cells, the number of synapses increased and the refraction of HEK293 cells was poor after the intervention of Amanita manginiana extracts. CONCLUSIONS The extracts of Amanita manginiana involved in this YNSUD case has obvious cytotoxicity, and some of its toxicity can be reduced by boiled and enzymolysis, but cannot be completely detoxicated. Therefore, the consumption of Amanita manginiana is potentially dangerous, and it may be one of the causes of the YNSUD.
Humans ; HEK293 Cells ; Sincalide ; China ; Amanita ; Death, Sudden

Chronic refractory wound (CRW) is one of the most challengeable issues in clinic due to complex pathogenesis, long course of disease and poor prognosis. Experts need to conduct systematic summary for the diagnosis and treatment of CRW due to complex pathogenesis and poor prognosis, and standard guidelines for the diagnosis and treatment of CRW should be created. The Guideline forthe diagnosis and treatment of chronic refractory wounds in orthopedic trauma patients ( version 2023) was created by the expert group organized by the Chinese Association of Orthopedic Surgeons, Chinese Orthopedic Association, Chinese Society of Traumatology, and Trauma Orthopedics and Multiple Traumatology Group of Emergency Resuscitation Committee of Chinese Medical Doctor Association after the clinical problems were chosen based on demand-driven principles and principles of evidence-based medicine. The guideline systematically elaborated CRW from aspects of the epidemiology, diagnosis, treatment, postoperative management, complication prevention and comorbidity management, and rehabilitation and health education, and 9 recommendations were finally proposed to provide a reliable clinical reference for the diagnosis and treatment of CRW.

Currently,the research or publications related to the clinical comprehensive evaluation of Chinese patent medicine are increasing,which attracts the broad attention of all circles. According to the completed clinical evaluation report on Chinese patent medicine,there are still practical problems and technical difficulties such as unclear responsibility of the evaluation organization,unclear evaluation subject,miscellaneous evaluation objects,and incomplete and nonstandard evaluation process. In terms of evaluation standards and specifications,there are different types of specifications or guidelines with different emphases issued by different academic groups or relevant institutions. The professional guideline is required to guide the standardized and efficient clinical comprehensive evaluation of Chinese patent medicine and further improve the authority and quality of evaluation. In combination with the characteristics of Chinese patent medicine and the latest research achievement at home and abroad,the detailed specifications were formulated from six aspects including design,theme selection,content and index,outcome,application and appraisal,and quality control. The guideline was developed based on the guideline development requirements of China Assoication of Chinese medicine. After several rounds of expert consensus and public consultation,the current version of the guideline has been developed.
Medicine, Chinese Traditional ; Nonprescription Drugs ; Consensus ; China ; Reference Standards ; Drugs, Chinese Herbal

Objectives:To explore the correlation between mitral annulus calcification(MAC)and recurrence of atrial fibrillation(AF)after radiofrequency ablation. Methods:The study included 785 patients with AF who underwent radiofrequency ablation in Beijing Anzhen Hospital from January 1,2019 to December 31,2020.According to the recurrence of AF after operation,patients were divided into recurrence group and non-recurrence group.Univariate Cox regression model was used to analyze the risk factors associated with AF recurrence,and multivariate Cox regression model was used to evaluate the influence of MAC on AF recurrence. Results:The average follow-up was(16±10)months.190 patients(24.2%)in the recurrence group,595(75.8%)patients in the non-recurrence.Patients in the recurrence group were older,had a higher proportion non-paroxysmal AF,a higher proportion of MAC,moderate/severe mitral regurgitation and larger left atrial diameter(LAD),and higher CHA2DS2-VASc score(all P<0.001).Univariate analysis showed that MAC was a risk factor of AF recurrence after radiofrequency ablation(HR=2.530,95%CI:1.639-3.907,P<0.001).After adjusting for age and sex,MAC remained significantly associated with an increased risk of AF recurrence after radiofrequency ablation(HR=1.52,95%CI:1.14-2.17,P<0.001).After multivariate adjustment for age,sex,non-paroxysmal AF,hypertension,diabetes,LAD,moderate/severe mitral regurgitation,and CHA2DS2-VASc score,MAC remained as an independent risk factor of AF recurrence(HR=1.48,95%CI:1.13-1.95,P=0.001). Conclusions:MAC is significantly associated with an increased risk of AF recurrence after radiofrequency ablation.

The mixing process is a critical link in the formation of oral solid preparations of traditional Chinese medicine. This paper took the extract powder of Guizhi Fuling Capsules and Paeonol powder as research objects. The angle of repose, loose packing density, and particle size of the two powders were measured to calibrate discrete element simulation parameters for the mixing process. The discrete element method was used to calibrate the simulated solid density of Paeonol powder and extract powder of Guizhi Fuling Capsules based on the Hertz-Mindlin with JKR V2 contact model and particle scaling. The Plackett-Burman experimental design was used to screen out the critical contact parameters that had a significant effect on the simulation of the angle of repose. The regression model between the critical contact parameters and the simulated angle of repose was established by the Box-Behnken experimental design, and the critical contact parameters of each powder were optimized based on the regression model. The best combination of critical contact parameters of the extract powder of Guizhi Fuling Capsules was found to be 0.51 for particle-particle static friction coefficient, 0.31 for particle-particle rolling friction coefficient, and 0.64 for particle-stainless steel static friction coefficient. For Paeonol powder, the best combination of critical contact parameters was 0.4 for particle-particle static friction coefficient and 0.19 for particle-particle rolling friction coefficient. The best combination of contact parameters between Paeonol powder and extract powder of Guizhi Fuling Capsules was 0.27 for collision recovery coefficient, 0.49 for static friction coefficient, and 0.38 for rolling friction coefficient. The verification results show that the relative error between the simulated value and the measured value of the angle of repose of the two single powders is less than 1%, while the relative error between the simulated value and the measured value of the angle of repose of the mixed powder with a mass ratio of 1∶1 is less than 4%. These research results provide reliable physical property simulation data for the mixed simulation experiment of extract powder of Guizhi Fuling Capsules and Paeonol powder.
Wolfiporia ; Calibration ; Powders ; Medicine, Chinese Traditional ; Capsules