OBJECTIVE: To analyze the current status and trends of the disease burden of knee osteoarthritis (KOA) in China from 1990 to 2023, and to examine the epidemiological characteristics of age, gender differences, and attribution to high body mass index (BMI), in order to provide a basis for formulating prevention and treatment strategies to reduce the disease burden of KOA in China. METHODS: Based on the 2023 Global Burden of Disease Study (GBD) database, data on the number, rate, and age-standardized rate of incidence, prevalence, disability-adjusted life years (DALYs) for KOA, and DALYs for KOA attributable to high BMI in the Chinese population from 1990 to 2023 were integrated. The Joinpoint 5.4.0.0 software was used to analyze the age and gender differences in KOA and the epidemiological characteristics attributable to high BMI. RESULTS: The standardized incidence, prevalence, and DALYs rates of KOA in China in 2023 increased by 6.46%, 6.43%, and 6.93%, respectively, compared with 1990. In terms of age, the disease burden of KOA in China was lowest in the age group of 30-34 years, with the highest incidence rate in the age group of 50-54 years, whereas the prevalence rate and DALYs rate continued to increase with age, and both were highest in the age group of ≥70 years. In terms of gender, all disease burden standardized rate indicators were higher in females than in males, and the difference widened with age. The rate of BMI-attributable DALYs increased at an annual average rate of 1.57% (95% CI: 1.55, 1.59) from 1990 to 2023, again with significant age and gender differences. CONCLUSION The continued growth of the KOA disease burden and significant population differences characterizing China call for focused attention on the female middle-aged and elderly population, enhanced weight management, and implementation of targeted preventive and control measures.
Humans ; Osteoarthritis, Knee/epidemiology* ; China/epidemiology* ; Male ; Female ; Middle Aged ; Incidence ; Aged ; Adult ; Prevalence ; Body Mass Index ; Disability-Adjusted Life Years ; Cost of Illness ; Aged, 80 and over ; Sex Factors ; Global Burden of Disease ; Age Factors ; Young Adult ; Quality-Adjusted Life Years

Loss-of-function variants in CSDE1 have been strongly linked to neuropsychiatric disorders, yet the precise role of CSDE1 in neurogenesis remains elusive. In this study, we demonstrate that knockout of Csde1 during cortical development in mice results in impaired neural progenitor proliferation, leading to abnormal cortical lamination and embryonic lethality. Transcriptomic analysis revealed that Csde1 upregulates the transcription of genes involved in the cell cycle network. Applying a dual thymidine-labelling approach, we further revealed prolonged cell cycle durations of neuronal progenitors in Csde1-knockout mice, with a notable extension of the G1 phase. Intersection with CLIP-seq data demonstrated that Csde1 binds to the 3' untranslated region (UTR) of mRNA transcripts encoding cell cycle genes. Particularly, we uncovered that Csde1 directly binds to the 3' UTR of mRNA transcripts encoding Cdk6, a pivotal gene in regulating the transition from the G1 to S phases of the cell cycle, thereby maintaining its stability. Collectively, this study elucidates Csde1 as a novel regulator of Cdk6, sheds new light on its critical roles in orchestrating brain development, and underscores how mutations in Csde1 may contribute to the pathogenesis of neuropsychiatric disorders.
Animals ; Neurogenesis/genetics* ; Cell Cycle/genetics* ; Mice, Knockout ; Mice ; Neural Stem Cells/metabolism* ; DNA-Binding Proteins/metabolism* ; Cyclin-Dependent Kinase 6/genetics* ; Cell Proliferation ; 3' Untranslated Regions ; Cerebral Cortex/embryology* ; RNA-Binding Proteins ; Mice, Inbred C57BL

Cardiac troponin I (cTnI), a widely used biomarker for assessing cardiovascular risk, can provide a window for the evaluation of drug-induced myocardial injury. Label-free biosensors are promising candidates for detecting cell secretomes, since they do not require labor-intensive processes. In this work, a label-free electrochemical aptasensor is developed for in situ monitoring of cardiac cell secretomes in cell culture media based on target-induced strand displacement. The aptasensing system contains an aptamer-functionalized signal nanoprobe facing trimetallic metal-organic framework nanosheets and a gold nanoparticle-based detection working electrode modified with DNA nanotetrahedron-based complementary DNA for indirect target detection. The signal nanoprobes (termed CAHA) consisted of copper-based metal-organic frameworks, AuPt nanoparticles, horseradish peroxidase, and an aptamer. When the aptasensor is exposed to cardiac cell secretomes, cTnI competitively binds to the aptamer, resulting in the release of signal nanoprobes from the biorecognition interface and electrochemical signal changes. The aptasensor exhibited rapid response times, a low detection limit of 0.31 pg/mL, and a wide linear range of 0.001-100 ng/mL. We successfully used this aptasensor to measure cTnI concentrations among secreted cardiac markers during antitumor drug treatment. In general, aptasensors can be used to monitor a variety of cardiac biomarkers in the evaluation of cardiotoxicity.

Bone grafting is a primary method for treating bone defects. Among various graft materials, xenogeneic bone substitutes are widely used in clinical practice due to their abundant sources, convenient processing and storage, and avoidance of secondary surgeries. With the advancement of domestic production and the limitations of imported products, an increasing number of bone filling or grafting substitute materials isentering clinical trials. Relevant experts have drafted this consensus to enhance the management of medical device clinical trials, protect the rights of participants, and ensure the scientific and effective execution of trials. It summarizes clinical experience in aspects, such as design principles, participant inclusion/exclusion criteria, observation periods, efficacy evaluation metrics, safety assessment indicators, and quality control, to provide guidance for professionals in the field.
Humans ; Bone Substitutes/therapeutic use* ; Randomized Controlled Trials as Topic/methods* ; Consensus ; Bone Transplantation ; Research Design

Surgical operation is the main treatment of oral and maxillofacial tumors.Dysphagia is a common postoperative complication.Swal-lowing disorder can not only lead to mis-aspiration,malnutrition,aspiration pneumonia and other serious consequences,but also may cause psychological problems and social communication barriers,affecting the quality of life of the patients.At present,there is no systematic evalua-tion and rehabilitation management plan for the problem of swallowing disorder after oral and maxillofacial tumor surgery in China.Combining the characteristics of postoperative swallowing disorder in patients with oral and maxillofacial tumors,summarizing the clinical experience of ex-perts in the field of tumor and rehabilitation,reviewing and summarizing relevant literature at home and abroad,and through joint discussion and modification,a group of national experts reached this consensus including the core contents of the screening of swallowing disorders,the phased assessment of prognosis and complications,and the implementation plan of comprehensive management such as nutrition management,respiratory management,swallowing function recovery,psychology and nursing during rehabilitation treatment,in order to improve the evalua-tion and rehabilitation of swallowing disorder after oral and maxillofacial tumor surgery in clinic.

Objective:To evaluate the regeneration and biomechanical property recovery of semitendinosus tendon(ST)/gracilis tendon(GT) after anterior cruciate ligament(ACL) reconstruction using shear wave elastorgraphy (SWE) combined with high-frequency ultrasound(HFUS).Methods:Twenty-five patients who underwent ST/GT autograft reconstruction after ACL rupture at the People′s Hospital of Guangxi Zhuang Autonomous Region from January 2020 to June 2022 were prospectively enrolled. All patients underwent HFUS, SWE and flexion strength assessment at pre-operation and 1, 3, 6, 12, 24 months postoperatively. The morphology, length, cross-sectional area and SWE of ST/GT and flexion strength of knee were recorded at each time point. Repeated measures analysis of variance was employed to compare the cross-sectional area and elasticity value of regenerated ST/GT at different time points. Spearman correlation analysis was used to investigate the relationship between the elasticity value of regenerated ST/GT and flexion strength.Results:The regeneration rates of ST/GT after being harvested for ACL reconstruction were 88% and 92%. The length of the regenerated ST/GT were shorter than before operation(both P<0.05). Repeated measures analysis of variance revealed significant differences in the cross-sectional area of regenerated ST/GT, both in terms of time effect and inter-group effect ( F=27.264, 28.980; both P<0.001), but no significant difference was observed in the interaction effect ( F=0.670, P=0.652). The cross-sectional area of regenerated ST/GT was the largest at 3 months postoperatively ( P<0.05), and restored to the preoperative level at 12 and 24 months postoperatively (both P>0.05). Repeated measures analysis of variance showed that the elasticity values of the regenerated ST/GT were significantly different in terms of time effect, group effect, and interaction effect ( F=265.402, 33.015, 11.475; all P<0.001). The elasticity of regenerated ST/GT post-operation gradually increased over time. The flexion strength level of knee gradually improved post-operation(χ 2=34.83, P<0.001). The elasticity values of the regenerated ST and GT showed significant positive correlations with the flexion strength ( rs=0.755, 0.761; both P<0.001). Conclusions:HFUS discovers that most of ST/GT can be regenerated after being harvested for ACL reconstruction. The flexion strength and elasticity value of regenerated tendon recover gradually with time. It is suggested that the SWE can predict the recovery of biomechanical property of regenerated ST/GT.

Objective:To explore the value of whole exome sequencing for the inferential analysis of recessive genetic disease carrier status for couples with a child died of Primary immunodeficiency (PID).Methods:Clinical data was collected from four couples with a childbearing history of PID who had sought genetic counseling and undergone genetic testing at Henan Provincial People′s Hospital from February 2017 to December 2021. Whole exome sequencing (WES) was performed on both partners of each couple, and candidate variants were validated by Sanger sequencing and fluorescent quantitative PCR. Prenatal diagnosis was conducted on fetuses of these couples after confirming the variants.Results:A total of six variants were detected in four genes including IL2RG, BTK, CYBB, and DUOX2. Among these, the c.1265G>A and c.3329G>A variants of the DUOX2 gene and the c. 676C>T variant of the IL2RG gene were previously known as pathogenic variants. On the other hand, the Exon5_8del variant of the IL2RG gene, the c. 184_185delAC variant of the BTK gene, and the c. 472A>T variant of the CYBB gene were unreported previously. Based on the guidelines from the American College of Medical Genetics and Genomics, the IL2RG: Exon5_8del, BTK: c. 184_185delAC and CYBB: c. 472A>T variants were classified as likely pathogenic (PVS1+ PM2_Supporting+ PP4).Prenatal diagnosis was conducted for three couples during their subsequent pregnancies, and the results revealed that the fetuses had the wild-type genotypes at the c. 184_185 position of the BTK gene, the c. 472 position of the CYBB gene, and the c. 676 position of the IL2RG gene. Follow-up examinations one year after birth has found no abnormality in the infants. Conclusion:WES is an important tool to infer and analyze the carryier status for couples who had given births to children died of PID and improve the positive detection rate.

Objective:To explore the genetic etiology of a pedigree with intellectual disability and explore its pathogenesis.Methods:A Chinese pedigree which had presented at the Henan Provincial People′s Hospital in March 2023 was selected as the study subject. Clinical data of the pedigree were collected, along with peripheral venous blood samples from its members. Whole exome sequencing (WES) was carried out, and candidate variants were verified by Sanger sequencing. Amniotic fluid was collected for prenatal diagnosis. This study was approved by the Medical Ethics Committee of the Henan Provincial People′s Hospital (No. 2019-134).Results:Both the proband (a 6-year-old male) and his mother (30 years old) had various degrees of intellectual and motor impairment. WES revealed that the proband has harbored a de novo heterozygous c. 2563_2567dup (p.Lys856fs) variant of the UBE3A gene, while his mother, maternal grandmother and fetus had all harbored a novel heterozygous c. 409+ 1G>A variant of the RNF13 gene. Based on the guidelines from the American College of Medical Genetics and Genomics (ACMG), both variants were predicted to be pathogenic (PVS1+ PS1+ PM2_Supporting; PVS1+ PM2_Supporting+ PP3). Conclusion:Based on the clinical manifestations and the result of genetic testing, the heterozygous c.2563_2567dup (p.Lys856fs) variant of the UBE3A gene probably underlay the intellectual disability and developmental delay in the proband, whilst the heterozygous c. 409+ 1G>A variant of the RNF13 gene may underlie the intellectual disability in the proband′s mother and grandmother. Above results have enabled genetic counseling and prenatal diagnosis for this pedigree.

Objective:A novel anatomic posterior malleolus locking plate for Chinese people was designed, researched, developed, and tested biomechanically.Methods:An anatomic parameter database of posterior malleolus of Chinese people was established by collecting CT images of ankle joints from 100 healthy volunteers in Shanghai Tongji hospital from June 2022 to May 2023. Combined with relevant computer-aided technologies, a novel anatomic posterior malleolus locking plate for Chinese people was designed and produced. In addition, model verification and biomechanical test were carried out on vertical displacements under different fixation modes and different axial loads (500, 1 000, and 1 500 N). Failure loads at a displacement of 2 mm and maximum failure loads at the complete failure of internal fixation were also tested and recorded.Results:Based on the imaging anatomic measurement, the width quartile of posterior malleolus was 19.4, 26.6, 35.0 mm. The 3D reconstruction models of ankle joint CT corresponded to small, medium, and large basic posterior malleolus plates. Height of the screw safety zone was 5.5(5.3, 5.7) mm. The tip-back angle was 153.0°(148.5°, 157.5°) and tip-back height was 20.0(19.7, 20.9) mm. The novel anatomic posterior malleolus locking plate based on tibiofibular and ankle joint CT scan and relevant computer-aided technologies fit well with posterior malleolus of tibia, showing anatomic fitting. Based on the associate biomechanical test, the novel plate fixation had smaller vertical displacements of posterior malleolus fragment under axial loads of 500, 1 000, and 1 500 N compared with the control plate, but greater failure loads when the vertical displacement of the posterior malleolus fragment was 2 mm and greater maximum failure loads at complete failure of the internal fixation. At an axial load of 500 N, the vertical displacements of the posterior malleolus fragment after posterior malleolus fixation with a control plate, a 6-hole anatomical locking plate, and a 5-hole anatomical locking plate were 0.60±0.02, 0.45±0.04, and 0.52±0.04 mm, respectively with significant difference ( F=88.287, P<0.001); at an axial load of 1 000 N, the vertical displacements were 2.22±0.03, 1.10±0.03, and 1.15±0.03 mm for the three fixation modes, respectively, and the difference was statistically significant ( F=10 061.890, P<0.001); At an axial load of 1 500 N, the vertical displacements were 2.81±0.04, 1.50±0.03 and 1.67±0.03 mm for the three fixation modes, respectively with significant difference ( F=9 774.019, P<0.001). When the vertical displacement of the posterior malleolus fragment was 2 mm, the failure loads for the three fixation modes were 0.80(0.73, 0.80)、2.00(1.93, 2.00) and 1.70(1.70, 1.70) kN, respectively with significant differences ( H=54.245, P<0.001). The maximum failure loads at complete failure of the internal fixation for the three fixation modes were 1.90(1.90, 1.98)、4.30(4.30, 4.30) and 3.70(3.63, 3.70) kN, respectively with significant differences ( H=53.863, P<0.001). Conclusions:The novel anatomic posterior malleolus locking plate for Chinese people was well matched to the posterior malleolus with high mechanical strength and good stability, showing a promising future for clinical application.

The establishment of a traceability system for the entire industry chain of Chinese medicinal materials can enhance regional brand building,raise the quality awareness of medicinal material producers,standardize the production processes of Chinese medicinal materials,and ensure the production of high-quality medicinal materials.Sichuan Province has successfully implemented a provincial-level Traditional Chinese Medicine(TCM)tracing system that is interconnected across provinces,cities,and counties.This system enables the complete tracking of the entire supply chain,starting from seed and seedling cultivation,through planting and breeding,harvesting and processing,and finally to the production and distribution of decoction pieces in trade and medical institutions.This research provides a comprehensive overview of the progress made in establishing the Chinese herbal medicine traceability system in Sichuan Province.It analyzes the existing challenges faced by participating enterprises,such as the hierarchy of involvement,information integrity,and the overall impact of the system.Moreover,the paper presents valuable insights and suggestions for the further development of the Chinese herbal medicine traceability system in Sichuan Province.These recommendations focus on enhancing the traceability scope,improving service capabilities,promoting data sharing,and establishing standardized norms and guidelines.