ObjectiveTo construct an automatic measurement model for palmar tilt and radial inclination suitable for traditional Chinese medicine （TCM） clinical scenarios， and to validate its accuracy and efficiency in TCM manipulative reduction settings. MethodsData on anteroposterior （AP） and lateral X-rays of distal radius fractures were collected from patients admitted to 18 TCM/ integrated TCM and western medicine hospitals in Jiangsu province between September 1st， 2023， and September 1st， 2024， via the Jiangsu Diagnosis and Treatment Big Data Platform for TCM Dominant Diseases. A medical image segmentation framework based on multi-scale feature fusion and edge-awareness was employed， combined with anatomical knowledge specific to TCM orthopedics， to optimize the feature extraction strategy of an artificial intelligence （AI） model. This framework enabled automatic segmentation of fracture regions and measurement of distal radius palmar tilt and radial inclination. The accuracy of the AI model in measuring radial inclination and volar tilt was validated， and the measurement time and average time gain rate of the AI model were compared to those of manual measurement. ResultsA total of 15,444 AP and lateral X-ray images of distal radius fractures were collected， and were divided into a training set （11,144 images， 5066 AP and 6078 lateral）， a validation set （3700 images， 1840 AP and 1860 lateral）， and an independent test set （600 images， 300 AP and 300 lateral） after preprocessing. In the measurement of 300 AP X-rays in the independent test set for radial inclination， when the degree error between AI measurement and manual measurement was ＜3° and ＜5°， AI measurement accuracy was 83% and 93%， respectively. In 300 lateral X-rays in the test set for palmar tilt， when AI measurements had an error of ＜3° and ＜5° compared to manual measurements， corresponding accuracy rate was 78% and 90%， respectively. For 50 X-ray images， AI measurement time was （1.37±0.05） min for radial inclination while manual measurement time was （22.57±2.52） min （P＜0.001）； in terms of palmar tilt， the AI measurement time was （1.33±0.14） min， shorter than （23.70±2.80） min for manual measurement time （P＜0.001）. Average time gain rates for manual and AI measurements were 93.93% and 94.39% respectively. ConclusionAn automatic measurement model for palmar tilt and radial inclination in distal radius fractures has been established， enabling more accurate and efficient assessment as well as providing a tool to support the quantitative evaluation of the efficacy of TCM manipulative reduction and large-sample clinical research.

Osteoarthritis (OA) is a degenerative joint cartilage disease characterized pathologically by osteophytes formation and subchondral bone damage. It leads to pain, stiffness, deformation and even disability in the patients, and increases the risk of comorbidities. As its pathophysiological mechanisms are not well understood, it is hard to identify the specific targets of OA and standardize its pharmacological treatments. Some scholars believe that synovial inflammation is the main factor of pain and progression of OA, so disease-modifying anti-rheumatic drugs (DMARDs) for inflammatory arthritis could be used to treat OA. However, others hold opposing views, arguing that inflammation is not the core driving factor of OA, and the available research results are not sufficient to support the application of DMARDs in OA. In addition, the side effects and monitoring requirements limit the application value of DMARDs in treatment of OA, especially for elderly OA patients with comorbidities. This article analyzes and discusses this debate based on the mechanisms of OA inflammation and pain, and in conjunction with relevant research findings from domestic and international studies.

Objective To design a training device of the flight crew for plateau normobaric low-oxygen acclimatization so as to enhance the flight crew's ability to adapt to the low oxygen environment after rushing into the plateau and reduce the incidence of acute plateau reaction.Methods The training device comprised a plateau environment simulation controller,a multimodal physiological acquisition system and hypoxia exercise training evaluation software.The plateau environment simulation controller was composed of an environment monitor for plateau acclimatization,two composite sensor sets,a control valve and an alarm device;the multimodal physiological acquisition system was made up of 20 groups of vital signs acquisi-tion devices,with a wearable dynamic ECG and respiration recorder,a wrist oximeter and an arm sphygmomano-meter included in each group.The hypoxia exercise training evaluation software was developed with a B/S architecture,Java language and JetBrains 2020.3.Results The training device proved to have the simulation altitude ranging from 0 to 6 000 m and facilitated simultaneous training of 20 persons for normobaric low-oxygen acclimatization,screening for hypoxia endurance,real-time monitoring of physiological parameters and assessment of training effect,with none of the trainees having acute plateau reaction.Conclusion The training device assists the flight crew for plateau normobaric low-oxygen acclimatization,and can be used for acclimatization training before plateau missions.[Chinese Medical Equipment Journal,2025,46(8):18-24]

Objective This study aimed to evaluate the clinical effect of hyaluronic acid(HA)scaffold combined with adipose-derived stem cells(ADSCs)in chronic wound healing of lower limbs and explore its applica-tion potential in promoting chronic wound healing.Methods A total of 50 patients were included in this study.They were divided into study and control groups according to the random number table method.There were 25 cases in each of the two groups of patients.HA and ADSCs were mixed in a 1:1 ratio and evenly injected into the wound base and the subcutaneous tissue around the wound at a rate of 0.1 ml/cm3.In the control group,ADSCs were only injected into the wound base and subcutaneous tissue around the wound.The infection rate,treatment satisfaction,wound healing rate,visual analogue score(VAS),and wound quantitative score were compared between the two groups at 7 days,14 days,and 28 days.Results The infection rate in the study group was lower than that in the control group,and the difference was statistically significant(P<0.05).Moreover,at 14 days and 28 days after treatment,the wound healing rate in the study group was higher than that in the control group,and the difference was statistically significant(P<0.05).On the 7th,14th,and 28th days after treatment,the VAS scores and the wound quantitative scores were lower than those in the control group,and the difference was statisti-cally significant(P<0.05).Furthermore,the treatment satisfaction rate in the research group(92％)was higher than that in the control group(80％).Conclusion HA scaffold combined with ADSCs could promote the healing of chronic wounds in lower limbs,reduce infection rate,and relieve wound pain,which provides a new idea for the treatment of chronic wounds.

Objective This study aimed to evaluate the clinical effect of hyaluronic acid(HA)scaffold combined with adipose-derived stem cells(ADSCs)in chronic wound healing of lower limbs and explore its applica-tion potential in promoting chronic wound healing.Methods A total of 50 patients were included in this study.They were divided into study and control groups according to the random number table method.There were 25 cases in each of the two groups of patients.HA and ADSCs were mixed in a 1:1 ratio and evenly injected into the wound base and the subcutaneous tissue around the wound at a rate of 0.1 ml/cm3.In the control group,ADSCs were only injected into the wound base and subcutaneous tissue around the wound.The infection rate,treatment satisfaction,wound healing rate,visual analogue score(VAS),and wound quantitative score were compared between the two groups at 7 days,14 days,and 28 days.Results The infection rate in the study group was lower than that in the control group,and the difference was statistically significant(P<0.05).Moreover,at 14 days and 28 days after treatment,the wound healing rate in the study group was higher than that in the control group,and the difference was statistically significant(P<0.05).On the 7th,14th,and 28th days after treatment,the VAS scores and the wound quantitative scores were lower than those in the control group,and the difference was statisti-cally significant(P<0.05).Furthermore,the treatment satisfaction rate in the research group(92％)was higher than that in the control group(80％).Conclusion HA scaffold combined with ADSCs could promote the healing of chronic wounds in lower limbs,reduce infection rate,and relieve wound pain,which provides a new idea for the treatment of chronic wounds.

This consensus was developed by the Orthodontic Society of the Chinese Stomatological Association to provide a systematic, scientific, and practical guideline for informed consent in orthodontic care. Orthodontic treatment is typically lengthy, highly individualized, and involves multiple factors such as growth and development, occlusal function, and facial esthetics. Rapid technological advances and diverse risk profiles make the traditional reliance on orthodontist experience or institutional templates insufficient to ensure patients′ full understanding and autonomous decision-making. To address this, the expert panel conducted extensive reviews of domestic and international guidelines, analyzed representative dispute cases, and performed multicenter patient-clinician surveys. Using a multi-round Delphi method, the group established a standardized informed consent framework covering the initial consultation, treatment, and retention phases. The consensus emphasizes that informed consent is not only a fundamental legal and ethical requirement but also a key step in building trust, improving patient compliance, and enhancing treatment satisfaction. Orthodontists should clearly and comprehensively explain treatment plans, potential risks, uncertainties, and associated costs, while respecting the autonomy of patients or guardians, and maintain continuous communication and dynamic evaluation throughout the treatment process. The release of this consensus provides unified and authoritative guidance for clinical orthodontics, helping to standardize informed consent, enhance its transparency, safeguard patient rights, reduce medical risks, and promote high-quality, sustainable development of orthodontic practice.

Objective:To digitally measure the three-dimensional (3D) size of primary tooth crowns and the dimensions of the dental arch in children with individual normal primary dentition, preliminarily obtaining baseline data on the 3D size of primary tooth crowns as well as the length and width of the dental arch, and their influence factors. This study aims to provide a data foundation for the design of reference models for primary dentition.Methods:From May to June 2021, 122 caries-free children aged 3.5-4.5 years with individual normal occlusion were selected from five kindergartens in Haidian District, Beijing. Impressions were taken and plaster models were cast. After preliminary screening, 67 eligible models were scanned to obtain digital dental models. Digital measurement software was used for landmark-based measurements. Parameters included 3D crown dimensions (mesiodistal diameter, buccolingual diameter, and occlusogingival height), dental arch dimensions (length and width at specific regions), and occlusal measurements (overjet and overbite at the primary central incisors, and Bolton index for anterior and full dentition). Gender differences in crown dimensions and bilateral symmetry of homologous teeth, as well as the correlations between arch dimensions and gender, height, weight, and body mass index (BMI) were analyzed.Results:The homonymous teeth of 67 children exhibited strong bilateral symmetry in all 3D dimensions ( P>0.05). Gender differences were observed in the buccolingual dimension for all deciduous molars except for the right mandibular first deciduous molar ( P<0.05). For the occlusogingival dimension, gender differences were found in the right maxillary first and second deciduous molars, left maxillary first deciduous molar, and left mandibular first and second deciduous molars ( P<0.05). For the mesiodistal dimension, only the left mandibular second deciduous molar and right mandibular deciduous canine showed gender differences ( P<0.05). All significant differences above indicated larger dimensions in boys compared to girls. In both maxillary and mandibular arches, the lengths and widths at various locations were significantly larger in boys than in girls ( P<0.05). Univariate correlation analysis revealed that body weight was positively correlated with the width of the terminal plane in both the maxilla and mandible and the total length of the mandibular dental arch, while BMI was positively correlated with the width of the maxillary terminal plane and the widths at all measured sites in the mandible ( P<0.05). Multiple regression analysis demonstrated that, after controlling for relevant variables, BMI was a significant positive predictor for the lengths and widths at various sites of the dental arch ( P<0.05), and height was a positive predictor for dental arch length ( P<0.05), as well as body weight was a positive predictor for the width in the molar region ( P<0.05). Overjet at the primary central incisors was 2.28 (1.57, 2.66) mm, and overbite was 1.13 (0.75, 1.92) mm. The anterior Bolton index was 0.79±0.03, and the overall Bolton index was 0.94±0.03. Conclusions:Primary tooth crowns of individual normal occlusion children demonstrate strong bilateral symmetry in homologous teeth. Most primary molars exhibit gender differences in buccolingual and occlusogingival dimensions, with larger values in boys. Arch dimensions (length and width) are consistently larger in boys.

OBJECTIVE To observe the impact of drug-resistant bacterial infections on cost burden and payment of diseases under diagnosis-related group(DRG)payment system.METHODS The data regarding the payments un-der health insurance DRG were collected from pilots of 6 cities in Shandong Province from 2019 to 2021.The pa-tients were divided into the drug-resistant infection group and the non-drug-resistant infection group according to the type of infection and were matched 1∶1 using propensity score matching(PSM)with age,sex,type of health insurance and major diagnosis categories as covariates.The medical cost burden,related DRG payment standards,coverage rate of actual medical cost,components of medical costs and consumption of medical re-sources were observed.RESULTS The average hospitalization cost was 2.8 times in the drug-resistant infection group higher than that the non-drug-resistant infection group,the length of hospital stay was about 10 days,and the current hospitalization cost of only 19.12％of the patients with drug-resistant infections could be covered by DRG payment standards,far lower than 52.07％of the patients with non-drug-resistant infections(P＜0.05).CONCLUSIONS The burden of cost of the patients with drug-resistant infections is remarkably higher than that of the patients with non-drug-resistant infections,however,the current DRG payment standards are hard to cover the actual medical cost.It is suggested that the DRG grouping and payment policies should be further opti-mized so as to raise the affordability of both the patients with drug-resistant infections and the hospital.

This study analyzed the genetic evolutionary characteristics of sandflies and their effects on the spread of kala-azar in various environments in endemic provinces in China,to provide a scientific basis for kala-azar disease prevention and control.Sand-flies were collected in kala-azar endemic areas such as southern Xinjiang,the large hilly areas of southern Gansu,the northern Sich-uan and Taihang Mountains,and surrounding small hills.The cytochrome c oxidase subunit I and cytochrome b gene fragments of mito-chondrial DNA were amplified to identify sandfly species.The COI and Cytb gene sequences of sandflies from southern Xinjiang and Si-chuan recorded in NCBI were also collected.The intraspecific and interspecific genetic differences of sandflies were calculated in MEGA11.0,and a phylogenetic tree was constructed through the neighbor-joining method,for analysis of the genetic and evolutionary characteristics of sandfly populations and their effects on disease transmission.A total of 155 sandflies were collected from nine sam-pling sites in seven provinces of China;the species included Phlebotomus chinensis,Phlebotomus wui,and Sergentomyia squamirostris.Five sandfly species belonging to two genera were collected:P.chinensis,P.wui,and Phlebotomus alexandri in the genus Phleboto-mus,and S.squamirostris in the genus Sergentomyia.Genetic evolution analysis based on COI and Cytb gene sequences indicated intra-specific genetic distances of 0-0.062 and 0-0.056,respectively,and interspecific genetic distances of 0.126-0.176 and 0.110-0.171,respectively.The phylogenetic tree indicated that P.wui,P.alexandri,Phlebotomus longiductus,and S.squamirostris clus-tered into one branch.The sequences of P.chinensis in the large and small hilly areas clustered into two geographical clades.In the small hilly areas,the sequences of P.chinensis aggregates showed small genetic differences,the pathogen infection was consistent,and the cases showed an epidemic spread trend.Large genetic differences at the molecular level were observed among sandflies in dif-ferent ecological regions,thus indicating key effects on leishmaniasis transmission.On the basis of these findings,prevention and con-trol strategies should be adapted to local conditions,and precise and effective prevention and control measures should be formulated according to the genetic evolution characteristics of sandflies in different regions,to better control the transmission of Kala-azar.

Objective:To investigate the association between adiponectin-related copy number variation (CNV) region (CNVR) and gestational diabetes mellitus (GDM).Methods:Pregnant women who had prenatal screening in Anqing Municipal Hospital, Anhui Province, from February 2018 to December 2020 were surveyed for baseline information collection, and blood samples were collected. The outcome information was obtained by post pregnancy follow-up. Latex-enhanced immunoturbidimetry and ASA-CHIA chip were used to detect serum adiponectin levels and CNV of pregnant women, respectively. After genotyping, CNV data were processed with software PennCNV 1.0.5 following standard quality control procedure. CNVR were identified and integrated by using software R 4.3.3. Then the associations between CNVR and adiponectin was evaluated, and gene annotation and over-representation analysis were conducted. The log-binomial regression model was used to adjust relevant covariates and analyze the association between adiponectin-related CNVR and GDM.Results:The detection rate of GDM was 9.54% (176/1 845) in the pregnant women. The genotyping information of 1 840 people (99.73%) passed quality evaluation. A total of 33 878 CNVs were identified, and 1 449 CNVRs were obtained after integration. After the false discovery rate method correction, CNVR_132 (CHR2: 47611743-47635062), CNVR_254 (CHR3: 10182703-10183872), CNVR_691 (CHR7: 150637053-150834539) and CNVR_1101 (CHR14: 104248431-104830620) were correlated with adiponectin levels (all P<0.05). Over- representation analysis showed that the molecular function of ribonucleotide binding [Gene Ontology (GO): 0032553] was significantly enriched based on the GO database. The log-binomial regression model, adjusting age, pre-pregnancy BMI, history of miscarriage, smoking history, and family history of diabetes, indicated that CNVR_132 (CHR2: 47611743-47635062) and CNVR_1101 (CHR14: 104248431-104830620) were not statistically associated with the risk for GDM (both P>0.05). However, CNVR_254 (CHR3: 10182703-10183872, a RR=1.83, 95% CI: 1.15-2.91) and CNVR_691 (CHR7: 150637053-150834539, a RR=1.73, 95% CI: 1.23-2.43) might be associated with an increased risk for GDM (all P<0.05). Conclusion:Adiponectin-related CNVR_254 (CHR3: 10182703-10183872) and CNVR_691 (CHR7: 150637053-150834539) might be risk factors for the incidence of GDM.