Background and aims:Noninvasive assessments play a crucial role in ruling out high-risk esophageal varices(HREV)in cirrhotic patients.However,the value of sound touch elastography(STE)in predicting HREV has not been comprehensively investigated.Therefore,this study aimed to establish prediction models based on liver and spleen stiffness measurements obtained by STE and provide assessment strategies and cutoff values tailored for different clinical situations.Methods:This prospective study included cirrhotic patients who underwent esophagogastroduodeno-scopy(EGD).Liver and spleen stiffness measurements by STE were performed within six months of EGD examination.Various prediction models and their corresponding cutoff values were established for different clinical situations,incorporating spleen diameter and laboratory parameters.Results:A total of 154 cirrhotic patients were included in the study and stratified into training(n=119)and validation(n=35)sets.Multivariable analysis revealed platelet,spleen diameter and spleen stiffness measurement as independent predictors of HREV.The model incorporating spleen stiffness measurement,platelet,and spleen diameter demonstrated superior performance in predicting HREV,yielding an area under the receiver operating characteristic curve(AUC)of 0.878 and 0.853 in the training set and validation set,respectively.Application of this model for screening cirrhotic patients could avoid EGDs in 39.7％(27/68)and 35.3％(6/17)of patients in the training and validation sets,respectively.Conclusions:Liver and spleen stiffness measurements obtained through STE are valuable for predicting HREV in cirrhotic patients.The developed prediction models and their corresponding cutoff values provide tailored solutions for various clinical situations,thereby effectively reducing the need for un-necessary endoscopies.

Objective:To explore the clinical characteristics and risk factors of acute kidney injury (AKI) in patients with diquat mixed with paraquat poisoning.Methods:We retrospectively analyzed the clinical data of 210 patients admitted to the department of emergency at our hospital with paraquat, diquat or mixed poisoning from January 20, 2016, to June 10, 2024. Based on the detection results of plasma toxicants, patients were categorized into three groups: the paraquat group (PQ group), and the diquat group (DQ group), the diquat-paraquat mixed group (mixed group). We compared clinical indices, occurrence, and severity of AKI among these groups. In the mixed group, patients were further divided into AKI and non-AKI subgroups based on the presence of AKI during hospitalization, and differences in clinical indices between these subgroups were analyzed. Univariate logistic regression and least absolute shrinkage and selection operator (Lasso) regressions were used to screen risk factors, and multivariate logistic regression was applied to establish the model. ROC curves were generated, and factors influencing AKI occurrence in the mixed group were identified.Results:A total of 88 patients were included in the PQ group, 28 in the DQ group, and 57 in the mixed group. Significant differences were observed among the three groups in terms of age, mortality rate, ingestion amount, body mass index(BMI), occurrence of AKI, the incidence of organ support therapy, SIRS score, PSS score, and APACHE Ⅱ score on admission ( P < 0.05). All three groups exhibited various degrees of AKI, with the mixed group showing a higher proportion and more severe conditions. In the mixed group, compared with the non-AKI group, the AKI group showed significantly higher values for age, number of deaths, ingestion amount, SIRS score, PSS score, APACHE Ⅱ score, plasma PQ concentration on admission, plasma DQ concentration on admission, white blood cell count (WBC), neutrophil count (NEUT), monocyte count (MONO), serum creatinine (SCr), procalcitonin (PCT), c-reactive protein (CRP), alanine aminotransferase (ALT), aspartate aminotransferase (AST), blood lactic acid (Lac), and cystatin C (CysC) ( P < 0.05). Conversely, the estimated glomerular filtration rate (eGFR) and partial pressure of carbon dioxide (PCO2) were significantly lower in the AKI group ( P < 0.05). Additionally, in the mixed group, SCr levels at various times post-poisoning were significantly higher compared with the non-AKI group ( P < 0.05), showing an increasing trend and peaking at 212.19 ± 101.67 μmol/L on the fifth day after poisoning. Age, ingestion amount, SIRS score on admission, WBC, MONO, and PCO 2 were extracted by Lasso-Logistic regression. Multivariate logistic regression identified ingestion amount and SIRS score on admission as the independent risk factors for the occurrence of AKI in the mixed group. The area under the ROC curve for ingestion amount and SIRS score on admission was 0.991 (95% CI: 0.976-1.000), the sensitivity was 0.940 and the specificity was 1.000. Conclusions:The diquat mixed with paraquat poisoning is associated with a higher incidence and greater severity of AKI compared with poisoning with either PQ or DQ alone. Additionally, ingestion amount and SIRS score on admission have been identified as independent risk factors for the occurrence of AKI in patients with the mixed poisoning. The combined assessment of these two factors improves AKI prediction in patients with the mixed poisoning.

Objective:To investigate the relationship between oxygen consumption (VO 2), carbon dioxide production (VCO 2), and Oxygen Consumption/lactate (VO 2/Lac) with risk of death in patients with severe ARDS. Methods:A retrospective cohort study method was used, and the study subjects were hospitalized for >5 days adult patients with severe ARDS in the central intensive care unit of Henan Provincial People's Hospital from 1 March 2020 to 30 June 2023. The following patients were excluded: IC test was not completed on the 4th day of ICU admission, IC test results were unreliable, mechanical ventilation duration had exceeded 48 h at the time of ICU transfer or admission, palliative care patients and pregnant and parturient women. Using indirect calorimetry to determine VO 2 and VCO 2 values on the 4th day of admission, reviewing medical records to obtain general condition, disease information, blood gas analysis (including lactate value), diagnostic and therapeutic measures, and following up deaths by telephone and time of death. The primary outcome measure was death at 90 days, and the secondary outcome measure was death at 28 days, length of stay in ICU, total length of stay, and total hospitalization cost. Cox regression analysis and linear regression analysis were used to investigate the relationship between VO 2, VCO 2, VO 2/Lac and primary and secondary outcome indexes. Results:A total of 216 patients were enrolled, 78 patients (36.1%) died and 138 patients (63.9%) survived at 90 days. After correction for confounders, the results of multifactorial Cox regression analysis suggested that compared with the Q4 group, HR (95% CI) for 90-day risk of death in the VO 2 Q1 and Q2 groups was 3.21 (1.38, 7.49) and 3.24 (1.42, 7.38), and HR (95% CI) for 90-day risk of death in the VCO 2 Q1, Q2 and Q3 groups was 5.88 (2.33, 14.84), 4.26 (1. 60, 11.34) and 3.54 (1.34, 9.35), respectively, and the HR (95% CI) for 90-day risk of death in the VO 2/Lac Q1, Q2 and Q3 groups were 8.72 (3.01, 25.25), 8.43 (2.91, 24.47) and 4.04 (1.34, 12.17) respectively. P-trends were all <0.05, indicating that VO 2, VCO 2 and VO 2/Lac were linearly and negatively associated with the risk of 90-day mortality. In addition, VO 2, VCO 2, and VO 2/Lac were negatively associated with 28-day risk of death and higher VO 2/Lac was negatively associated with length of ICU stay. Conclusions:VO 2, VCO 2 and VO 2/Lac were negatively associated with 90-day mortality risk and 28-day mortality risk in patients with severe ARDS and may be independent risk factors predicting mortality risk of such patients.

Objective To enhance the mechanical properties of trichiral honeycomb sandwich structures and satisfy the design criteria for vertebral implant structures.Methods A chiral-like honeycomb sandwich structure with an auxiliary support structure was constructed for optimal design.The finite element method was used to study the influence of the auxiliary support structure on the chiral-like honeycomb sandwich structure and the relationship between the support position and mechanical property parameters.Furthermore,the influence of the deformation mechanism of different structures on mechanical properties was discussed.Results All chiral-like honeycomb sandwich structures exhibited enhanced mechanical properties in comparison to trichiral honeycomb sandwich structures.The mechanical properties of the chiral-like dCW honeycomb sandwich structure with the auxiliary support structure positioned perpendicular to the ligament were optimal,and this position represented the optimal support position.When the volume was used as a control variable,the compressive stiffness,stiffness-to-mass ratio,and transverse strain of the chiral-like honeycomb sandwich structure in the x1 direction were significantly correlated with the change of the support position,and all of them were positively correlated.Conclusions As a novel chiral-like honeycomb structure,it provides a biomechanical basis for the optimal design and clinical application of honeycomb sandwich structures as vertebral implant structures.

Nitrogen oxides(NOx=NO+NO2)are important precursors of ozone(O3),and NOx and its oxides together constitute reactive nitrogen oxides(NOy)in the atmosphere.A comprehensive understanding of the total NOy level in the atmosphere is of great significance for a deeper understanding of the atmospheric nitrogen cycle and oxidation,as well as for formulating strategies for air pollution prevention and control.In this work,a thermal decomposition-broadband cavity enhanced absorption spectroscopy(TD-BBCEAS)technique for online measurement of total NOy in the atmosphere was developed.With this method,the NOy was efficiently converted into NO2,and the total NOy concentration in the atmosphere was indirectly obtained by measuring NO2.Focusing on the key factors affecting the measurement of total NOy,the influence of NO titration efficiency and other NOy component TD efficiency on measurement accuracy was emphasized.By changing the oxygen(O2)flow rate through the mercury lamp to alter the O3 concentration for titrating NO,the conversion efficiency of NO was evaluated.At O2 flow rate of 6 mL/min,the conversion efficiency of NO was greater than 99%.TD efficiency testing and analysis on NO2,peroxyacetyl nitrate(PAN),nitric acid(HNO3),and nitrous acid(HONO),which account for a large proportion of atmospheric NOy components,was carried out using 680℃as the optimal TD temperature for efficient conversion of NOy.With NO and HONO sample gases as typical verification gases,the conversion efficiency of NOy and the accuracy of NOy measurement by TD-BBCEAS system were verified by switching the on and off modes of mercury lamp and TD device.At integration time of 60 s,the detection limit of the system for NOy was 2.83×1010 molecules/cm3(60 s,2σ).A comparative measurement of actual atmospheric NOy was conducted between the TD-BBCEAS system and the NOy analyzer.The observation results showed a correlation coefficient(R2)of 0.98 and a slope of 0.93,further verifying the feasibility and accuracy of applying the TD-BBCEAS system to measurement of total NOy.

Poly(lactic-co-glycolide)(PLGA)is a key excipient in long-acting sustained-release preparations,and its degradation properties directly affect the drug release behavior.In this study,PLGA microspheres were prepared by microfluidic techniques,and the morphology changes of the microspheres were observed by scanning electron microscopy(SEM).In alkaline environment,due to the accelerated hydrolysis of ester bonds,the surface of the microspheres was rapidly dissolved and eroded,and the degradation rate was significantly higher than that in acidic environment.High temperature accelerated the degradation of PLGA microspheres.Under neutral and alkaline conditions,the microspheres showed aggregation and adhesion.Under acidic conditions,the microspheres gradually decomposed into irregular fragments.The high ionic strength further promoted the surface corrosion of the microspheres,especially under extreme pH conditions.Simultaneously,PLGA microspheres encapsulating coumarin were prepared to simulate the microsphere formulation.The release rate of coumarin after degradation of the microspheres under different conditions was observed by measuring the absorbance with ultraviolet-visible spectrophotometry.The results were consistent with those of the blank microspheres.This study revealed that the degradation of PLGA microspheres was significantly pH-dependent,temperature sensitive and ion strength responsive.These findings not only helped to understand and optimize the long-term stability and controlled release performance of drug-carrying microspheres,but also provided a theoretical basis for further improvement of PLGA-based drug carrier design.

To evaluate the therapeutic effect of a modified Devine procedure with a subcutaneous sliding fixation method for the treatment of congenital concealed penis, we retrospectively selected 45 patients with congenital concealed penises who were admitted to General Hospital of Ningxia Medical University (Yinchuan, China) between September 2020 and November 2023. In all cases, the penis was observed to be short, and retracting the skin at the base revealed a normal penile body, which immediately returned to its original position upon release. All patients underwent the modified Devine procedure with subcutaneous sliding fixation and completed a 12-week postoperative follow-up. A statistically significant increase in penile length was observed postoperatively, with the median length increasing from 4.0 (interquartile range [IQR]: 3.5-4.8; 95% confidence interval [CI]: 3.9-4.4) cm to 8.0 (IQR: 7.8-8.0; 95% CI: 7.7-7.9) cm, with P < 0.001. The parents were satisfied with the outcomes, including increased penile length, improved hygiene, and enhanced esthetics. Except for mild foreskin edema in all cases, no complications (such as infections, skin necrosis, or penile retraction) were observed. The edema was resolved within 4 weeks after the operation. This study demonstrates that the modified Devine procedure utilizing the subcutaneous sliding fixation method yields excellent outcomes with minimal postoperative complications, reduced penile retraction, and high satisfaction rates among patients and their families.
Humans ; Male ; Penis/abnormalities* ; Retrospective Studies ; Urologic Surgical Procedures, Male/methods* ; Treatment Outcome ; Child ; Plastic Surgery Procedures/methods*

The exploration of novel targeted therapies for systemic lupus erythematosus (SLE) has always been a research hot topic in China and other countries. In recent years, there has been an increasingly in-depth understanding of the pathogenesis of SLE. The approval of belimumab, telitacicept, and anifrolumab for clinical application marked a breakthrough in the treatment of SLE. In addition, novel agents targeting other B-cell/plasma cell antigens, T cells, neutrophils, and multiple inflammatory signaling pathways are emerging, which may provide more treatment options for SLE. This review summarizes research progress in targeted therapies for SLE based on the latest clinical trials, providing a basis for individualized treatment of SLE.

Objective:To explore the application value of cinematic rendering reconstruction technology in laparoscopic resection of giant adrenal tumors.Methods:As many as 21 patients with large adrenal tumors who underwent laparoscopic resection in Yongchuan Hospital Affiliated to Chongqing Medical University from January 2021 to January 2024 were retrospectively analyzed, with a median age of 54.0 (40.5, 58.0) years and a median tumor diameter of 7.3 (6.8, 8.8) cm. All patients underwent preoperative cinematic rendering 3D reconstruction imaging. All patients underwent enhanced CT scans. Their CT images were three-dimensionally reconstructed on the post-processing workstation platform. By changing image perspectives, adjusting the visualization of organs or blood vessels, and using physical volume rendering, real-shadow-rendered images were obtained. With these images, surgeons can intuitively understand important preoperative information, like the relationship between the tumor and surrounding organs and the path of tumor-feeding blood vessels, for preoperative planning. Following thorough preoperative preparation, laparoscopic transabdominal resection was performed. During surgery, 20 tumors were found to be located in the adrenal gland, and 1 in the retroperitoneum, with 13 on the left side and 8 on the right side. Preoperative cinematic rendering 3D imaging was consistent with intraoperative findings.Results:All 21 patients underwent successful surgeries, with an average operation time of (199.0±95.3) minutes, a median blood loss of 220 (150, 500) ml, and a median blood transfusion volume of 200 (150, 400) ml. No significant damage of vital organs or major blood vessels occurred, and there were no case of conversion to open surgery.Conclusions:For retroperitoneal giant adrenal tumors, utilizing cinematic rendering 3D reconstruction imaging enables a comprehensive understanding of the relationship between the tumor and surrounding organs and vessels preoperatively. This approach can reduce intraoperative bleeding and collateral injuries, improve the success rate of laparoscopic resection, and enhance overall surgical safety.

Objective:To compare the biomechanical stability of a novel interlocking intramedullary nail (nIMN) with that of a traditional interlocking intramedullary nail (tIMN) in the treatment of type AO 32-A3 femoral shaft fractures using a finite element analysis.Methods:A healthy adult male volunteer, aged 30 years old and weighing 70 kg, was selected for collection of his CT scan data of the femur. A three-dimensional finite element model of the femur was established using software Mimics 17.0 and Geomagic Studio. After femoral shaft fractures of AO/OTA types 32-A3a, 32-A3b, and 32-A3c were simulated, nIMN and tIMN were assembled respectively. After boundary conditions and material properties of the models were set based on reference literature, 4 load states were simulated: vertical standing, slow walking, fast walking, and descending stairs. The displacements and stress distribution at the femoral fracture ends under the same conditions were compared between nIMN and tIMN schemes of fixation. The stabilities of each fracture model at different fixation schemes and load states were analyzed.Results:In the 4 load states simulated, the displacements of the fracture ends averaged 0.129 mm, and the maximum stresses 111.00 MPa. The smallest displacement and maximum stress (0.014 mm and 29.48 MPa) were found in the vertical standing in the femoral shaft fracture of type 32-A3c fixed with nIMN. The largest displacement and maximum stress (0.325 mm and 242.98 MPa) were found in descending stairs in the femoral shaft fracture of type 32-A3a fixed with tIMN. In femoral shaft fractures of types 32-A3a, 32-A3b, and 32-A3c, regardless of tIMN or nIMN fixation, the displacement and maximum stress increased with the load, with the femoral shaft fracture of type 32-A3a being particularly evident. nIMN fixation resulted in lower displacements and maximum stresses in AO/OTA types 32-A3a, 32-A3b, and 32-A3c than tIMN fixation. Taking descending stairs as an example, the overall maximum stress occurred on the proximal part of the femur and the surrounding area of Adams'arc, with the maximum stress fluctuating between 86.62 and 242.98 MPa. The maximum stress at the fracture end fluctuated between 0.44 and 56.49 MPa. The stress mainly concentrated on the medial part, and decreased from type 32-A3a to type 32-A3b to type 32-A3c.Conclusion:In type AO 32-A3 femoral shaft fractures, nIMN leads to a smaller fracture end displacement and a lower maximum stress than tIMN, indicating better rotational stability.