ObjectiveTo construct an automatic measurement model for palmar tilt and radial inclination suitable for traditional Chinese medicine （TCM） clinical scenarios， and to validate its accuracy and efficiency in TCM manipulative reduction settings. MethodsData on anteroposterior （AP） and lateral X-rays of distal radius fractures were collected from patients admitted to 18 TCM/ integrated TCM and western medicine hospitals in Jiangsu province between September 1st， 2023， and September 1st， 2024， via the Jiangsu Diagnosis and Treatment Big Data Platform for TCM Dominant Diseases. A medical image segmentation framework based on multi-scale feature fusion and edge-awareness was employed， combined with anatomical knowledge specific to TCM orthopedics， to optimize the feature extraction strategy of an artificial intelligence （AI） model. This framework enabled automatic segmentation of fracture regions and measurement of distal radius palmar tilt and radial inclination. The accuracy of the AI model in measuring radial inclination and volar tilt was validated， and the measurement time and average time gain rate of the AI model were compared to those of manual measurement. ResultsA total of 15,444 AP and lateral X-ray images of distal radius fractures were collected， and were divided into a training set （11,144 images， 5066 AP and 6078 lateral）， a validation set （3700 images， 1840 AP and 1860 lateral）， and an independent test set （600 images， 300 AP and 300 lateral） after preprocessing. In the measurement of 300 AP X-rays in the independent test set for radial inclination， when the degree error between AI measurement and manual measurement was ＜3° and ＜5°， AI measurement accuracy was 83% and 93%， respectively. In 300 lateral X-rays in the test set for palmar tilt， when AI measurements had an error of ＜3° and ＜5° compared to manual measurements， corresponding accuracy rate was 78% and 90%， respectively. For 50 X-ray images， AI measurement time was （1.37±0.05） min for radial inclination while manual measurement time was （22.57±2.52） min （P＜0.001）； in terms of palmar tilt， the AI measurement time was （1.33±0.14） min， shorter than （23.70±2.80） min for manual measurement time （P＜0.001）. Average time gain rates for manual and AI measurements were 93.93% and 94.39% respectively. ConclusionAn automatic measurement model for palmar tilt and radial inclination in distal radius fractures has been established， enabling more accurate and efficient assessment as well as providing a tool to support the quantitative evaluation of the efficacy of TCM manipulative reduction and large-sample clinical research.

To summarize the clinical characteristics, antibody spectrum and neuroelectrophysiological features of autoimmune nodopathy(AN), and to explore the phenotypic differences among different antibody-positive subgroups.

Objective:To investigate the incidence of shoulder work-related musculoskeletal disorders (WMSDs) among occupational population in China, and to explore their intrinsic association with personal and work-related factors.Methods:In April 2024, 73497 valid questionnaires of the Chinese version of the Musculoskeletal Disorders Electronic Questionnaire were retrospectively analyzed from June 2018 to December 2023 in 22 provinces and 29 key industries in China, and the general information, occurrence of WMSDs and related risk factors of key occupational populations in different regions in China were collected. By using Chi-square test and confirmatory factor analysis, the relationship between shoulder fatigue and pain in key occupational groups and individual factors, work type, work posture and work organization was discussed, and the internal relationship was analyzed based on structural equation model.Results:Higher incidence of shoulder fatigue and pain were associated with female, lack of physical exercise, uncomfortable working posture and neck leaning forward ( P<0.05). Structural equation model analysis showed that work type, work posture and work organization were strongly correlated ( r=0.58, 0.55). Work organization and work type were strongly correlated with shoulder fatigue ( r=0.65) and moderately correlated with shoulder fatigue ( r=0.21). Shoulder fatigue was moderately associated with shoulder pain ( r=0.40). Individual factors, work type, work posture and shoulder fatigue could directly affect shoulder pain ( OR=0.07, -0.09, 0.17 and 0.40), and work type and work posture could also indirectly affect shoulder pain through shoulder fatigue ( OR=0.08, 0.03). Work organization only indirectly affected shoulder pain through shoulder fatigue ( OR=0.26) . Conclusion:The main influencing factor of shoulder pain is shoulder fatigue, followed by work posture and individual factors. Structural equation model can better reflect the complex relationship between work type, work posture and work organization and shoulder WMSDs. Improving work posture and work organization may be an effective way to control the influence of shoulder fatigue on shoulder pain.

Objective:To explore the structural equation model to explore the levels of work-related musculoskeletal disorders (WMSDs) and various risk factors in the feet and ankle of China's occupational population, providing scientific basis for for preventing WMSDs in feet and ankles.Methods:Data of 73497 national occupational epidemiological cases were selected from June 2018 to December 2023 used the Chinese version of the Electronic Questionnaire on Musculoskeletal Disorders. The adverse ergonomic factors and their source classification standard and confirmatory factor analysis were used to investigate foot and ankle WMSDs and their related risk factors (including individual factors, work organization, work posture, work type, fatigue, etc.) in key occupational groups in China, and structural equation model hypothesis, fitting, verification, and path and intermediary effect analysis were carried out. The model fit evaluation indexes included Chi-square specific degrees of freedom ( χ2/ df), gauge fit index (NFI), Tucker Lewis index (TLI), goodness of Fit index (GFI), adjusted Goodness of Fit index (AGFI) and approximate root mean square error (RMSEA) . Results:A total of 73497 occupational workers were surveyed, with local muscle fatigue and WMSDs incidence rates in the feet and ankles being 17.17% and 12.06%, respectively. The fitting index of the adjusted structural equation model basically meets the standard (GFI=1, AGFI=1, RMESA=0.042, NFI=0.716, TLI=0.663). The top three factors affecting feet and ankle WMSDs are feet and ankle muscle fatigue, work type, and work organization, with standardized path coefficients of 0.221, 0.105, and 0.095, respectively. The top two factors affecting feet and ankle muscle fatigue are work organization and work type, with standardized path coefficients of 0.548 and 0.383, respectively. Feet and ankle muscle fatigue, work type, work organization, and work posture have a direct effect on feet and ankle WMSDs, with effect values of 0.221, 0.105, 0.095, and 0.077, respectively. The organization and type of work can also have indirect effects through feet and ankle muscle fatigue, with effect values of 0.121 and 0.084, respectively.Conclusion:Feet and ankle muscle fatigue has a direct impact on WMSDs, and plays a mediating role between ankle and ankle WMSDs caused by work organization and work type. Feet and ankle muscle fatigue is an important pathway leading to feet and ankle WMSDs. It is recommended that employers and managers detect job fatigue early and take corresponding prevention and intervention measures, which can play a key role in preventing feet and ankle WMSDs.

Objective:To explore the structural relationship between WMSDs in the upper limbs and various risk factors in the occupational population in China, based on a large sample epidemiological survey and structural equation analysis, and to establish a structural equation model, so as to lay a foundation for the prevention and control of such diseases.Methods:The Chinese version of the Musculoskeletal Disorders Electronic Questionnaire was used to conduct a nationwide survey on the prevalence of WMSDs in the upper extremity. Six factors related to WMSDs in the upper extremity were extracted by the classification standard of adverse ergonomic factors and their source and confirmatory factor analysis, including work organization, work type, upper extremity work posture, individual factors, upper extremity fatigue and upper extremity WMSDs. The structural equation analysis was carried out and the structural equation model was established.Results:The incidence of WMSDs and fatigue in the upper limbs was 24.44% and 43.76%, respectively. The adjusted structural equation model fitting indicators were generally up to the standard (GFI=1.000, AGFI=1.000, RMSEA=0.043, NFI=0.808, TLI=0.784) . The four exogenous latent variables of work organization, work type, upper limb work posture and individual factors were correlated. There was a strong positive correlation between job type and upper limb work posture ( r=0.865) , a moderate positive correlation between work organization and job type and upper limb work posture ( r=0.570, 0.490) , and a weak negative correlation between individual factors and the other three exogenous latent variables. Upper limb work posture and individual factors had direct effects on upper limb WMSDs, and the effect coefficients were 0.10 and 0.06, respectively. Upper limb fatigue played a mediating role between work organization, work type, upper limb work posture and upper limb WMSDs. The effect coefficient was 0.46, and the composition ratios of indirect effects were 100.0%, 100.0%, and 38.3%, respectively. The direct path effect of upper limb work posture, individual factors and upper limb WMSDs was weaker than the mediating path through upper limb fatigue. Conclusion:When carrying out the prevention and control of upper limbWMSDs, it is necessary to comprehensively consider the pathogenesis path of upper limb muscle fatigue and upper limb WMSDs caused by work organization, work type, and upper limb work posture, so as to provide theoretical reference for improving the prevention and control level of such diseases.

6-Thioguanine(6-TG)is an antineoplastic agent used in treatment of acute leukemia.However,significant interindividual variability in dosing regimens and frequent clinical manifestations of hepatotoxicity and myelosuppression as adverse effects have affected its therapeutic efficacy.Consequently,the development of rapid analytical methods for 6-TG in clinical samples,enabling continuous therapeutic drug monitoring of plasma concentrations,holds substantial significance in optimizing dosage regimens,mitigating adverse reactions,and investigating drug metabolism mechanisms.In this study,multi-tipped gold nanostars(AuNSs)were prepared.With bis-(p-sulfonylphenyl)phenylphosphine molecule as the protecting agent and internal standard molecule,the AuNSs were assembled onto a highly sensitive surface-enhanced Raman(SERS)substrate for developing a ratio-based SERS quantitative analysis method for 6-TG in serum.The AuNSs containing multiple tips and gaps exhibited strong local surface plasmon resonance effect and SERS activity,ensuring the sensitivity of the analytical method.Furthermore,the introduction of internal standard molecules could improve the reproducibility,which guaranteed this method suitable for rapid analysis of drug molecules in complex samples.Quantitative analysis of 6-TG was achieved with linear detetion range of 1.0×10?4-1.0 mmol/L.In the spiked recovery experiments of serum,the RSD was less than 5.32%,and the recoveries were 94%-104%,which proved that this method could be used for rapid quantitative determination of 6-TG in serum.This method provided a powerful tool for studying drug pharmacokinetics,which could promote the optimization of the usage methods of anti-cancer drugs,and it was expected to further enhance the clinical efficacy and safety of 6-TG,enabling it to achieve the best therapeutic effect.

In this study,a sensitive lateral flow immunoassay(LFIA)platform based on carbon dots-mesoporous silica nanocomposite(CD-MSNs)fluorescent probes was constructed for high-performance detection of inflammatory marker interleukin-6(IL-6).Green fluorescent carbon dots(CDs)were prepared by hydrothermal method with 3,9-perylenic acid and 3-aminopropyltriethoxysilane(APTES)as raw materials,and highly fluorescent CD-MSNs composites were then constructed by encapsulating the prepared CDs in mesoporous silica nanoparticles(MSNs).Fluorescent probes were prepared by covalent coupling of CD-MSNs with IL-6 antibody.Fluorescent immunochromatographic test strips were constructed by spraying IL-6 capture antibody and goat anti-mouse IgG on nitrocellulose membrane as detection line(T-line)and quality control line(C-line),respectively.The fluorescence immunoassay analyzer was used to quantitatively detect the fluorescence intensity of T-line,and the experimental results showed that the LFIA platform based on this probe had a good linear relationship in IL-6 concentration range of 102-106 pg/mL,and the detection limit was 64 pg/mL,which was two orders of magnitude more sensitive than that of the traditional colloidal gold test strips.This method effectively solved the issue of insufficient sensitivity of traditional LFIA technique,and provided a rapid and highly sensitive detection method for early diagnosis of inflammatory diseases.

The genome tagging project (GTP) plays a pivotal role in addressing a critical gap in the understanding of protein functions. Within this framework, we successfully generated a human influenza hemagglutinin-tagged sperm-specific protein 411 (HA-tagged Ssp411) mouse model. This model is instrumental in probing the expression and function of Ssp411. Our research revealed that Ssp411 is expressed in the round spermatids, elongating spermatids, elongated spermatids, and epididymal spermatozoa. The comprehensive examination of the distribution of Ssp411 in these germ cells offers new perspectives on its involvement in spermiogenesis. Nevertheless, rigorous further inquiry is imperative to elucidate the precise mechanistic underpinnings of these functions. Ssp411 is not detectable in metaphase II (MII) oocytes, zygotes, or 2-cell stage embryos, highlighting its intricate role in early embryonic development. These findings not only advance our understanding of the role of Ssp411 in reproductive physiology but also significantly contribute to the overarching goals of the GTP, fostering groundbreaking advancements in the fields of spermiogenesis and reproductive biology.
Animals ; Female ; Humans ; Male ; Mice ; Spermatids/metabolism* ; Spermatogenesis/physiology* ; Spermatozoa/metabolism* ; Thioredoxins/genetics*

Testicular histology based on testicular biopsy is an important factor for determining appropriate testicular sperm extraction surgery and predicting sperm retrieval outcomes in patients with azoospermia. Therefore, we developed a deep learning (DL) model to establish the associations between testicular grayscale ultrasound images and testicular histology. We retrospectively included two-dimensional testicular grayscale ultrasound from patients with azoospermia (353 men with 4357 images between July 2017 and December 2021 in The First Affiliated Hospital of Sun Yat-sen University, Guangzhou, China) to develop a DL model. We obtained testicular histology during conventional testicular sperm extraction. Our DL model was trained based on ultrasound images or fusion data (ultrasound images fused with the corresponding testicular volume) to distinguish spermatozoa presence in pathology (SPP) and spermatozoa absence in pathology (SAP) and to classify maturation arrest (MA) and Sertoli cell-only syndrome (SCOS) in patients with SAP. Areas under the receiver operating characteristic curve (AUCs), accuracy, sensitivity, and specificity were used to analyze model performance. DL based on images achieved an AUC of 0.922 (95% confidence interval [CI]: 0.908-0.935), a sensitivity of 80.9%, a specificity of 84.6%, and an accuracy of 83.5% in predicting SPP (including normal spermatogenesis and hypospermatogenesis) and SAP (including MA and SCOS). In the identification of SCOS and MA, DL on fusion data yielded better diagnostic performance with an AUC of 0.979 (95% CI: 0.969-0.989), a sensitivity of 89.7%, a specificity of 97.1%, and an accuracy of 92.1%. Our study provides a noninvasive method to predict testicular histology for patients with azoospermia, which would avoid unnecessary testicular biopsy.
Humans ; Male ; Azoospermia/diagnostic imaging* ; Deep Learning ; Testis/pathology* ; Retrospective Studies ; Adult ; Ultrasonography/methods* ; Sperm Retrieval ; Sertoli Cell-Only Syndrome/diagnostic imaging*

Postoperative infection of internal fixation of closed fractures the lower limbs in adults represents a devastating complication, characterized by diagnostic challenges, prolonged treatment duration and high disability rates. Current management of these infections faces multiple challenges, such as difficulties in early accurate diagnosis, and various controversies about the treatment plan, leading to poor overall diagnosis and treatment results. To address these issues, based on evidence-based medicine and principles with emphasis on scientific rigor, clinical applicability and innovation, the Trauma Branch of the Chinese Medical Association, Orthopedic Branch of the Chinese Medical Doctor Association, Orthopedics Branch of the Chinese Medical Association, and Trauma Orthopedics and Polytrauma Group of the Resuscitation and Emergency Committee of the Chinese Medical Doctor Association have collaboratively organized a panel of relevant experts to develop the Guideline for diagnosis and treatment of infection after internal fixation of closed lower limb fractures in adults ( version 2025). The guideline proposed 10 recommendations, aiming to provide a foundation for standardized diagnosis and treatment of postoperative infection in adults with closed lower limb fractures.